CS Paper Radar

Optimize, Learn, Refine: Whole-Body Grasping and Pick-and-Throw with a Spiral Soft Robot

Marwah Basuhai, Tingcong Liu, Ibrahim Alsarraj, Yuhao Wang, Ke Wu

cs.RO ·submitted 2026-09-22 04:29 UTC · v2
hot direction

Abstract

Soft continuum robots can exploit distributed compliance for whole-body manipulation, but synthesizing behavior through changing contacts remains difficult. We address whole-body grasping and pick-and-throw from an initially ungrasped state through outcome-based actuation-space optimization. Grasping is quantified by tip angular sweep and body-object enclosure, while throwing further incorporates release-direction alignment and minimum release speed. These objectives allow grasping, acceleration, and release to emerge from compliant interaction without prescribing contact forces, contact locations, or body configurations. Because the resulting actuation-to-outcome mapping is nonsmooth, we utilize derivative-free CMA-ES within an optimize-learn-refine framework. CMA-ES generates solutions for sampled conditions, a task-conditioned predictor learns warm starts, and CMA-ES refines them for unseen conditions. In simulation, the method achieves 492/500 successful grasps (98.4%) and success rates of 98%, 97%, and 94% across three directional throwing trials. Learned initialization increases grasping success from 78.6% to 98.4% while reducing the median rollout count from 1184 to 816 in CMA-ES. Hardware experiments achieve a 100% grasping success rate across 50 executions and a 100% pick-and-throw success rate across 30 executions, with 10 repetitions per direction. Together, these simulation and hardware results demonstrate the effectiveness of the proposed framework across both simulated and physical whole-body manipulation tasks.

Closest papers

Nearest neighbours by meaning across the whole index.

SWIM: Vision-Language-Grounded Soft Whole-Body Interactive Manipulation

cs.RO ·2026-09-15 ·Tingcong Liu, Aye Phyu Phyu Aung, Junjie Xiong, Siyi Ma, Bo An +2 more
similarity 0.73
Abstract

Soft and continuum robots enable manipulation through distributed body deformation and contact, yet translating language and visual context into executable whole-body actuation remains a fundamental challenge. We present SWIM, a framework that maps an initial RGB observation and a language instruction to a complete actuation-command sequence. Its vision-language-action (VLA) policy, SWIM-VLA, combines a diffusion action head with Visual Soft Proprioception (VSP) through a shared representation of RGB observations, language instructions, and tendon states. The diffusion head models conditional distributions of expert command chunks, while VSP supervises ordered body-anchor predictions using simulation ground truth, encouraging the representation to retain body geometry when learning from limited demonstrations. Embodied mechanical intelligence supports physical execution of command sequences generated through iterative virtual rollout from evolving simulated observations, with intrinsic compliance providing local contact adaptation without online policy queries. We evaluate SWIM on packing, reaching, and grasping on a planar tendon-driven soft robot, with grasping targets anchored. In simulation, SWIM-VLA achieves success rates of 100\%, 96\%, and 88\%, respectively, outperforming an adapted OpenVLA-OFT baseline and controlled ablations. On hardware, SWIM achieves success rates of 100\%, 80\%, and 75\%, compared with 75\%, 40\%, and 25\% for direct online deployment of the same policy checkpoint.

0.27

Non-Prehensile Throwing: A Reinforcement Learning Perspective

cs.RO ·2026-09-01 ·Abdullah Mustafa, Ryo Hanai, Ixchel G. Ramirez-Alpizar, Floris Erich, Ryoichi Nakajo +2 more
published similarity 0.70
Abstract · 8 pages, 9 figures, Accepted to IEEE IROS 2026

Robotic throwing enables fast object transport and extends a robot's reachable workspace beyond traditional pick-and-place. While prehensile (grasp-based) throwing works well for graspable items, non-prehensile (grasp-free) throwing is better suited for large, heavy, and/or deformable objects. Existing approaches rely on model-based optimization with simplified contact models (e.g., dynamic grasping) and low-dimensional trajectory parameterizations, which limit solution quality and reachable workspace. We propose a reinforcement learning approach that additionally leverages sliding and rolling contact modes and directly optimizes joint-space trajectories without analytical contact models or custom parameterizations. The Markov Decision Process (MDP) is formulated as a dynamical system that evolves the robot's joint state conditioned on the throwing target, object model, and initial configuration. Joint-jerk trajectories are planned offline at a low control rate and upsampled into smooth, high-rate velocity commands for deployment. For sim-to-real transfer, we minimize the robot-dynamics gap through minimum-jerk system identification and train uncertainty-aware policies to mitigate object-modeling errors, particularly sensitivity to dynamic friction. In simulation, the policy achieves 99% success across thousands of configurations and generalizes to unseen objects. Sensitivity analysis shows robustness to mass uncertainty but high sensitivity to dynamic friction, consistent with the sliding-based release mechanism. Deployed zero-shot on a UR5e operating near its physical limits (5 m/s end-effector velocity), our method throws diverse objects including heavy (790 g) and large (20x20x28 cm) items to targets up to 350 cm distance or 180 cm elevation, achieving a 97% real-world success rate.

0.25

Whole-Body Dexterity

cs.RO cs.AIcs.LGeess.SY ·2026-10-15 ·Conor Mc Gartoll, An Dang, Pranay Thangeda, Arjun Gupta, Carolina Higuera +3 more
similarity 0.70
Abstract · 20 pages, 13 figures

Current humanoid dexterous manipulation remains largely confined to end-effectors and simple grasps, falling short of humans' ability to engage the entire body by bracing and sliding bulky objects against the arms and torso. We introduce Whole-Body Dexterity (WBD), a general framework that uses the robot's body and appendages as contact surfaces to grasp and manipulate objects. Our sim-to-real pipeline first generates a dataset of feasible whole-body grasps, then trains reinforcement-learning experts on a general any-to-any repositioning objective by sampling initial and goal grasps from the dataset, and distills these experts into a single policy that uses proprioception and object geometry. We show that the distilled policy transfers zero-shot to a real Unitree G1, where it repositions a basketball and a cardboard box to regions around the torso and completes a long-horizon task that stows a box under one arm, carries it from a shelf to a table, and places it. The controller operates interactively, steered by coarse motion references from a human teleoperator. Across real-world whole-body manipulation tasks, the distilled controller completes 90% of trials, compared with 18% for direct retargeting and 4% for a generalist whole-body controller.

0.39

A Support-Enhanced Granular-Jamming Gripper for RL-based Grasping with Continuum Manipulators

cs.RO ·2026-09-24 ·Danyu Liu, Tianlin Zhang, Wei Chen, Wei Tang, Kecheng Qin +1 more
hot direction similarity 0.69
Abstract · 8 pages, 10 figures

Continuum manipulators provide dexterous motion in confined spaces, but structural compliance, hysteresis, and load-dependent deformation leave residual position and orientation errors that can undermine reliable contact with rigid grippers. To address this limitation, this paper presents a lightweight support-enhanced granular-jamming gripper tailored to a continuum manipulator. The gripper maintains compliance before jamming while establishing a direct load path to the continuum manipulator tip after jamming. To improve its grasping performance, we systematically designed membrane materials, particles, filling ratios, and the internal support structure, and further identify geometry-dependent grasp boundaries with respect to contact offset and object shape. Building on these results, we construct a physical manipulation system integrating the continuum manipulator, granular-jamming gripper, visual feedback, tendon actuation, and pneumatic control. We then train a reinforcement-learning-based reaching controller in a randomized simulation and deploy it on the physical system, demonstrating how positioning control and contact level mechanical adaptation can complement each other in a modular grasp-and-release task. By introducing an adaptive structure that relaxes the need for highly accurate modeling and positioning control, this work explores a design paradigm that integrates physical and embodied intelligence.

0.54

OATH: Object-Agnostic Tracking for Dexterous Hands, Enabling Rapid Physics-based Retargeting

cs.RO ·2026-10-09 ·Solvin Sigurdson, Prasanna Sriganesh, Juan Borbon, Joel Burdick, Dingqi Zhang +1 more
code/data similarity 0.68
Abstract · 8 pages, 7 figures, 3 tables. Project page: https://multiplylabs.github.io/oath/

Retargeting human demonstrations into dynamically feasible dexterous hand trajectories requires resolving complex contact physics, yet current methods either omit physical constraints or rely on computationally expensive sampling-based optimization in simulation. Reinforcement learning has previously been used to achieve planning and control through contact dynamics; however, standard policies require object-specific training and fail to generalize across arbitrary geometries. This work reframes physics-based retargeting as a residual learning problem, where we demonstrate that zero-shot generalization across objects relies on structured state representations. Specifically, formulating the observation space to include a localized contact-error signal guiding each robot link to its target coordinate on the object surface enables a single, unified residual policy to successfully grasp novel, unseen object geometries. Rolling out this policy in simulation on a kinematic reference trajectory yields a physics-based retargeter, OATH. Operating at 0.4 seconds of compute per second of reference, OATH achieves 2.4x faster-than-real-time performance and a 60-350x reduction in computational cost compared to sampling-based methods. The system recovers 58% of held-out and 54% of unseen-object DexYCB trajectories while maintaining a sub-2 cm tracking error.

0.29

TacBPM: A Tactile-conditioned Behavior Prior Model for Dexterous Reorientation

cs.RO ·2026-09-16 ·Jie Yin, Wanli Xing, Zeyuan Zhao, Xuezhou Zhu, Zhijie Deng +1 more
similarity 0.67
Abstract · Corresponding to: Jie Yin (jie.yin@sharpa.com)

Dexterous in-hand manipulation requires policies that coordinate high-DoF hand joints through intermittent, contact-rich interaction. Beyond target-orientation tracking, such policies must discover finger gaits that preserve object stability while adapting to geometry, anisotropy, pose, contact, and sensing changes. We propose \method, a tactile-conditioned behavior prior model for dexterous reorientation. \method distills multi-scale sphere specialists into a latent controller and lets downstream policies reuse the fixed tactile prior through residual latent actions, reducing renewed exploration from raw joint commands. The prior conditions on tactile-proprioceptive history so latent behavior reflects the current hand-object interaction. We evaluate arbitrary-pose transfer across anisotropic objects, commanded-axis rotation, and an arm-hand Grasp-to-AnyPose task in which the robot must grasp, lift, transport, and reach goal poses for novel tool geometries and generalized placements. Extensive experiments demonstrate that the proposed method accelerates training and enables stable policies where matched raw-action PPO remains near failure, with successful sim-to-real transfer in in-hand and arm-hand tasks.

0.20

Grasp2Twist: Learning Bimanual Dexterous Jar Opening by Reinforcement Learning

cs.RO ·2026-09-25 ·Mo Xu, Yunfu Deng, Jianuo Wang, Josiah Hanna, Bilge Mutlu
similarity 0.67
Abstract · 9 pages, 6 figures. Under review

This paper presents Grasp2Twist, a bimanual dexterous manipulation system that learns to grasp and twist open jar lids using reinforcement learning. Learning this task raises three challenges: learning a unified policy for a multi-stage task, sustaining lid twisting, and sim-to-real transfer. To address the first challenge, we introduce a continuous enclosure measure to guide grasp formation and a binary enclosure indicator to guide the grasp-to-twist transition for unified policy learning. We derive both from the geometric relationship between the object center and the convex hull formed by the hand's palm and fingertips. Kinematic constraints limit how far the hand can rotate the lid with fixed contacts, so sustained twisting requires finger contact reconfiguration. We use a three-stage curriculum to facilitate exploration of these contact changes and also improve robustness for sim-to-real transfer. With our approach, the learned policy demonstrates finger gaiting, reconfiguring hand-object contacts to sustain lid rotation. It transfers zero-shot to the physical system and achieves an 88% task success rate across six household containers, including peanut-butter, vitamin, and instant-coffee jars. Ablations further validate the roles of the geometric enclosure in grasp formation and the curriculum in contact-reconfiguration exploration.

0.27

SimTO-Robust: Automated Design of Soft Grippers Robust to Grasp Pose and Object Geometry

cs.RO ·2026-10-29 ·Kurt Enkera, Joshua Pinskier, Marcus Gallagher, David Howard
similarity 0.67
Abstract

Robotic grippers operating in unstructured environments must robustly grasp objects of different shapes and sizes despite perception and positioning errors. Soft grippers that can achieve this robustness through intelligent mechanical design rather than sophisticated control software offer a promising solution. However, no existing computational design framework explicitly optimises soft gripper morphology for robustness across object geometries and grasp poses. We introduce SimTO-Robust, a generalisation of simulation-driven topology optimisation (SimTO) that simulates grasps across multiple objects and poses and aggregates their contact forces to guide gripper morphology optimisation. We generate 6,646 designs and physically evaluate 24 of them alongside 10 specialised SimTO designs, two rigid baseline grippers, and a baseline generalist soft gripper produced using conventional topology optimisation. All 37 grippers are tested in a pick-and-place task involving five feature-rich objects and six grasp poses, with external disturbances of increasing magnitude applied during the task. On average, SimTO-Robust designs complete pick-and-place more reliably than specialised SimTO designs and the rigid baselines. The best SimTO-Robust designs also withstood more of the applied disturbances than any other tested gripper. These results show that incorporating diverse grasp conditions into simulation-driven topology optimisation is a simple and effective approach to improving real-world soft gripper robustness. More broadly, they show that robust robotic grasping can be achieved through intelligent mechanical design rather than sophisticated sensing and control.

0.24