CS Paper Radar

Non-Prehensile Throwing: A Reinforcement Learning Perspective

Abdullah Mustafa, Ryo Hanai, Ixchel G. Ramirez-Alpizar, Floris Erich, Ryoichi Nakajo, Yukiyasu Domae, Tetsuya Ogata

cs.RO ·submitted 2026-09-01 06:00 UTC · v1
published

Abstract

Robotic throwing enables fast object transport and extends a robot's reachable workspace beyond traditional pick-and-place. While prehensile (grasp-based) throwing works well for graspable items, non-prehensile (grasp-free) throwing is better suited for large, heavy, and/or deformable objects. Existing approaches rely on model-based optimization with simplified contact models (e.g., dynamic grasping) and low-dimensional trajectory parameterizations, which limit solution quality and reachable workspace. We propose a reinforcement learning approach that additionally leverages sliding and rolling contact modes and directly optimizes joint-space trajectories without analytical contact models or custom parameterizations. The Markov Decision Process (MDP) is formulated as a dynamical system that evolves the robot's joint state conditioned on the throwing target, object model, and initial configuration. Joint-jerk trajectories are planned offline at a low control rate and upsampled into smooth, high-rate velocity commands for deployment. For sim-to-real transfer, we minimize the robot-dynamics gap through minimum-jerk system identification and train uncertainty-aware policies to mitigate object-modeling errors, particularly sensitivity to dynamic friction. In simulation, the policy achieves 99% success across thousands of configurations and generalizes to unseen objects. Sensitivity analysis shows robustness to mass uncertainty but high sensitivity to dynamic friction, consistent with the sliding-based release mechanism. Deployed zero-shot on a UR5e operating near its physical limits (5 m/s end-effector velocity), our method throws diverse objects including heavy (790 g) and large (20x20x28 cm) items to targets up to 350 cm distance or 180 cm elevation, achieving a 97% real-world success rate.

Comment
8 pages, 9 figures, Accepted to IEEE IROS 2026

Closest papers

Nearest neighbours by meaning across the whole index.

OATH: Object-Agnostic Tracking for Dexterous Hands, Enabling Rapid Physics-based Retargeting

cs.RO ·2026-10-09 ·Solvin Sigurdson, Prasanna Sriganesh, Juan Borbon, Joel Burdick, Dingqi Zhang +1 more
code/data similarity 0.76
Abstract · 8 pages, 7 figures, 3 tables. Project page: https://multiplylabs.github.io/oath/

Retargeting human demonstrations into dynamically feasible dexterous hand trajectories requires resolving complex contact physics, yet current methods either omit physical constraints or rely on computationally expensive sampling-based optimization in simulation. Reinforcement learning has previously been used to achieve planning and control through contact dynamics; however, standard policies require object-specific training and fail to generalize across arbitrary geometries. This work reframes physics-based retargeting as a residual learning problem, where we demonstrate that zero-shot generalization across objects relies on structured state representations. Specifically, formulating the observation space to include a localized contact-error signal guiding each robot link to its target coordinate on the object surface enables a single, unified residual policy to successfully grasp novel, unseen object geometries. Rolling out this policy in simulation on a kinematic reference trajectory yields a physics-based retargeter, OATH. Operating at 0.4 seconds of compute per second of reference, OATH achieves 2.4x faster-than-real-time performance and a 60-350x reduction in computational cost compared to sampling-based methods. The system recovers 58% of held-out and 54% of unseen-object DexYCB trajectories while maintaining a sub-2 cm tracking error.

0.29

Grasp-TAGS: Task-Aware Grasp Selection via Critic Distillation for Prehensile Loco-Manipulation

cs.RO cs.AIcs.LG ·2026-11-06 ·Xun Tu, Minghao Zou, Karthik Desingh
similarity 0.73
Abstract · 10 pages, 6 figures

Loco-manipulation, which requires mobile manipulators to coordinate locomotion and manipulation over long horizons, is a key capability for large-object rearrangement in applications such as service robotics and warehouse automation. Despite recent progress, reliably executing these tasks remains challenging because performance depends on complex robot-object and object-environment interaction dynamics. Existing approaches address this challenge either through model-based methods, which often require accurate dynamics models, or through learning-based methods, which reduce this requirement but typically assume a fixed or predefined initial grasp. However, different geometrically stable grasps can lead to substantially different downstream manipulation performance. Therefore, we propose Grasp-TAGS, a task-aware grasp selection framework for goal-conditioned large-object rearrangement. We train a unified PPO-based reinforcement learning policy across multiple initial grasp configurations and distill the learned critic into a lightweight grasp utility network that ranks candidate grasps using only the candidate grasp configuration and goal information. At inference time, we select the grasp with the highest predicted downstream utility for the downstream policy to complete the task, before even making a contact. Experiments demonstrate that Grasp-TAGS improves rearrangement success over both fixed single-grasp policies and random grasp selection, achieving an average success rate of 89.84% compared with 79.87% for the best-performing single-grasp policies, an improvement of 9.97 percentage points. Grasp-TAGS also reduces final orientation errors across all evaluated objects. For more qualitative results, refer to the supplementary webpage: https://rpm-lab-umn.github.io/Grasp-TAGS-web-page/

0.17

Contact-Guided Exploration for Non-Prehensile Locomanipulation with Multi-Critic RL

cs.RO ·2026-08-28 ·Simone Tolomei, Mayank Mittal, Franco Angelini, Manolo Garabini, Paolo Salaris +1 more
top venue similarity 0.73
Abstract · project website: https://tolomeis.github.io/contact-guided-exp Accepted in IEEE Robotics and Automation Letter (RA-L) 8 pages, 9 figures

Non-prehensile manipulation offers versatile skills for moving and rearranging heavy or bulky objects, particularly when combined with a mobile manipulation platform. However, both model-based and model-free approaches struggle with the complex hybrid dynamics and the sparsity of the contact in these tasks. To address these challenges, we propose a contact-guided exploration strategy implemented within a Multi-Critic Reinforcement Learning (RL) framework. A dedicated exploration critic is trained with a dense contact-seeking reward that guides the end-effector toward meaningful contact points; its influence is progressively decayed to recover a task-optimal policy. We obtain candidate interaction points from a general-purpose grasping algorithm, enabling the exploration mechanism to generalise across various object geometries. We evaluate the approach on multiple tasks, including box pushing, chair transportation, and a dishwasher opening task. Finally, we validate the chair transportation policy through extensive experiments on a quadrupedal mobile manipulator, demonstrating deployable non-prehensile manipulation in the real world.

0.37

Uni-PNP: Unified Prehensile and Non-prehensile Policy Learning for Generalizable Object Pose Reaching

cs.RO ·2026-10-15 ·Wenxuan Zhu, Yuze Wang, Jiangran Lyu, Jiayi Chen, Yixin Zheng +4 more
code/data similarity 0.73
Abstract

Object manipulation often requires combining non-prehensile actions with grasping. However, existing approaches typically develop these capabilities separately and integrate them by sequencing distinct primitives through prescribed intermediate objectives, limiting the coordination of contact motions and grasping. Their integration also remains sensitive to object and gripper geometry and depends on particular environmental supports, complicating real-world deployment. We present Uni-PNP, a unified policy that jointly learns prehensile and non-prehensile manipulation for object pose reaching across diverse objects and grippers. To achieve this, we first pretrain a geometry encoder to predict contact-induced object motion using a contact-dynamics dataset constructed from simulated interactions between diverse objects and grippers. We then train the policy in a two-stage reinforcement learning curriculum from graspable objects to ungraspable peers, encouraging the discovery of non-prehensile interactions and their integration with grasping. Experiments show 76.39% success on hundreds of seen objects with grippers, and 57.91% on unseen peers, outperforming the strongest pose-reaching baseline by 20.52 and 17.79 percentage points, respectively. We also analyze emergent behaviors, including nonprehensile and prehensile repositioning, grasp acquisition that requires grasping after tipping, and table-assisted reorientation while grasping, and transfer to the real-world scenario. Project page available at lgswdn.github.io/Uni-PNP.

0.23

DexTaG: Tactile-as-Guidance in Reinforcement Learning for Dexterous Manipulation

cs.RO ·2026-09-27 ·Han Yang, Yian Wang, Yunlong Song, Zhenjia Xu, Chuang Gan
similarity 0.71
Abstract

Glove-based motion capture is emerging as a scalable approach to collecting dexterous-hand demonstration data. However, due to the kinematic gap between the human and robot hand, the recorded human motions cannot be executed directly on the robot, especially for contact-rich tool-use tasks involving in-hand reorientation. Prior work bridges this gap in simulation through reinforcement learning (RL) or trajectory optimization, but the human contact pattern is hard to preserve under such formulations, often producing unnatural manipulation and unstable functional grasps. These methods also train a separate policy or solve a separate optimization for each reference trajectory, which is inefficient. To solve these problems, we propose DexTaG, a tactile-guided RL framework for dexterous manipulation. During training, tactile signals captured by the glove guide policy search toward the measured human contact pattern, reducing reliance on precise reference geometry for contact supervision. To improve efficiency, we train a single generalizable retargeter jointly on all training trajectories of the same object. The retargeter is further distilled into a tactile-free student controller conditioned on the target object trajectory for real-world deployment. On marker-pen and hammer manipulation tasks, DexTaG learns natural, contact-rich behaviors that baselines with distance-based contact heuristics fail to learn, generalizes to held-out trajectories of the same object and task, and outperforms single-trajectory baselines on OakInk2.

0.19

Beyond the End-Effector: Learning Whole-Arm Contact Manipulation from Human Demonstrations

cs.RO cs.CVcs.LG ·2026-10-13 ·Bo-Ruei Huang, Daniel Seita, Erdem Bıyık
publishedcode/data similarity 0.70
Abstract · Accepted to the 10th Conference on Robot Learning (CoRL 2026). 23 pages, 8 figures, 5 tables. Project page: https://wacl-robot.github.io

Robot manipulation has traditionally relied on end-effector-centric interactions. In contrast, humans routinely exploit whole-arm contacts to improve efficiency, robustness, and adaptability, especially when the hands are occupied or when precise grasping is unnecessary. Enabling similar capabilities in robots remains challenging: the robot must select where on its arm to make contact, generate effective non-prehensile interactions, and satisfy task-specific pose or safety constraints on the end-effector. We propose Whole-Arm Contact Learning (WACL), a hierarchical framework that describes each whole-arm contact task with three robot-agnostic representations and hands them to a quasi-static surface-contact optimizer: semantic keypoints that summarize the scene, a reference contact trajectory that specifies where and how the arm presses on the object, and safety-aware path constraints that a vision-language model generates from the task description to protect the end-effector's task. The robot's kinematic chain enters only in this optimizer, which grounds these representations onto the arm by jointly searching over which link makes contact, where on that link, and the joint configuration that realizes it. This decomposition lets WACL learn the contact trajectory from 10 bare-hand human demonstrations per task collected without teleoperation, while new end-effector constraints change only the optimizer's input rather than any trained component. Real-world experiments on a 7-DoF arm across four whole-arm tasks show that WACL sustains contact under end-effector constraints where a strong link-pose baseline fails (78% vs. 33% success) and generalizes to new constraints without retraining. Website: https://wacl-robot.github.io

0.53

Potential-Field Action Representation for Reinforcement Learning in Contact-Rich Manipulation

cs.RO cs.AI ·2026-09-18 ·Xinyu Liu, Gökhan Solak, Arash Ajoudani
similarity 0.70
Abstract

Model-free reinforcement learning can acquire contact-rich robotic manipulation skills through trial-and-error interaction, but it often requires the policy to learn both task strategy and low-level motion generation. In this setting, the action representation is critical because it determines how policy outputs are converted into robot motion, shaping both exploration and physical execution. Direct Cartesian command interfaces require the policy to generate motion at every decision step, coupling task-level adaptation with continuous low-level control and increasing the learning burden. We propose PA-RL, a reinforcement-learning framework that uses artificial potential fields as the action representation. Instead of commanding motion directly, the policy adapts the parameters of an energy-like potential field, which generates a state-dependent guidance direction executed through a Cartesian impedance controller. We evaluate PA-RL on peg-in-hole insertion, a representative contact-rich task with nonlinear dynamics and discontinuous contact transitions. In simulation, PA-RL is compared with Cartesian velocity, Cartesian pose, and variable-impedance action spaces using the same RL algorithm. PA-RL is the only method to reach a 100% evaluation success rate within the allotted training time, while the best baseline reaches 92.6%. It also reduces joint-torque variation by 55.4% and Cartesian acceleration variation by 70.8% relative to the best baseline, without explicit motion-quality penalties in the reward. The simulation-trained policy further completes 9/9 real-robot insertions without fine-tuning, demonstrating the deployment feasibility of the learned potential-field interface.

0.22

BeyondContact: A Reinforcement Learning Framework for Airflow-Based Non-Contact Manipulation

cs.RO eess.SY ·2026-11-02 ·Peiyu Yang, Mohamad S. Moudallal, Antonio Langella, Giulio Turrisi, Victor Barasuol +1 more
code/data similarity 0.70
Abstract · Peiyu Yang and Mohamad S. Moudallal contributed equally. This work has been submitted to the IEEE for possible publication. Copyright may be…

Contact-based robotic manipulation is constrained by end-effector reachability and the mechanical properties of objects. Airflow can exert forces without direct robot-object contact, enabling manipulation of objects beyond the reach or when direct contact is undesirable. However, the lack of suitable simulation has hindered the application of reinforcement learning to airflow-based manipulation, limiting the broader adoption of this mechanism compared with contact-based methods. To address this gap, we developed a robot- and task-agnostic airflow extension for Isaac Lab that supports massively parallel training. The extension uses experimentally identified airflow models to compute the forces and torques exerted on objects. Based on this extension, we train a hybrid push-blow (HPB) policy that combines contact-based pushing with airflow manipulation and a rectangular reorientation (RR) policy that controls a cuboid's heading using airflow alone. To enable physical execution, we design a lightweight, high-speed blower that coexists with a gripper. In zero-shot real-world deployment, HPB achieves an 80% success rate over 20 trials, while RR achieves a mean absolute heading error of 2.6 degrees across four target headings. The project materials are available at https://github.com/iit-DLSLab/BeyondContact.

0.35