CS Paper Radar

BeyondContact: A Reinforcement Learning Framework for Airflow-Based Non-Contact Manipulation

Peiyu Yang, Mohamad S. Moudallal, Antonio Langella, Giulio Turrisi, Victor Barasuol, Claudio Semini

cs.RO eess.SY ·submitted 2026-11-02 12:50 UTC · v1
code/data

Abstract

Contact-based robotic manipulation is constrained by end-effector reachability and the mechanical properties of objects. Airflow can exert forces without direct robot-object contact, enabling manipulation of objects beyond the reach or when direct contact is undesirable. However, the lack of suitable simulation has hindered the application of reinforcement learning to airflow-based manipulation, limiting the broader adoption of this mechanism compared with contact-based methods. To address this gap, we developed a robot- and task-agnostic airflow extension for Isaac Lab that supports massively parallel training. The extension uses experimentally identified airflow models to compute the forces and torques exerted on objects. Based on this extension, we train a hybrid push-blow (HPB) policy that combines contact-based pushing with airflow manipulation and a rectangular reorientation (RR) policy that controls a cuboid's heading using airflow alone. To enable physical execution, we design a lightweight, high-speed blower that coexists with a gripper. In zero-shot real-world deployment, HPB achieves an 80% success rate over 20 trials, while RR achieves a mean absolute heading error of 2.6 degrees across four target headings. The project materials are available at https://github.com/iit-DLSLab/BeyondContact.

Comment
Peiyu Yang and Mohamad S. Moudallal contributed equally. This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible

Closest papers

Nearest neighbours by meaning across the whole index.

ReForce: Learning Force-aware Retargeting for Dexterous Manipulation

cs.RO ·2026-08-16 ·Yuhang Wu, Lingqi Zeng, Changwei Jing, Jianglong Ye, Xiaolong Wang
similarity 0.71
Abstract

Human demonstrations offer a scalable data source for dexterous manipulation, but transferring them to robot actions remains challenging due to the embodiment gap. Today's retargeting is mostly kinematic, yet manipulation is decided by force, which governs how the hand interacts with the object and how the object moves. In this paper, we present ReForce, a Force-aware Retargeting method that turns human motion and forces into robot actions that reproduce the intended contact. ReForce predicts a residual on the kinematically retargeted action to reach the desired force, using a general force tracker trained on large-scale simulation interactions. It supports both online force-aware teleoperation and offline data translation. In simulation and on real hardware, ReForce achieves lower force-tracking error and stronger multi-finger contact engagement on contact-rich tasks such as paper-cup grasping and tongs manipulation.

0.41

ZeroBot: Learning from Scratch in Minutes with Generative Real2Sim

cs.RO cs.CV ·2026-09-27 ·Ivan Kapelyukh, Xiaohan Zhang, Stephen James, Laura Herlant, Edward Johns
top venuecode/datahighly cited similarity 0.70
Abstract · IEEE RA-Letters 2026. Project page: https://zerobot-rl.github.io

We present ZeroBot, a real2sim framework for learning a robot manipulation task from scratch in minutes under challenging conditions: zero human demonstrations, zero policy pre-training, and zero known object models. Given only a single view of an object and a goal pose for that object, ZeroBot uses image-to-3D generative models to obtain a complete object mesh, which is used in simulation for large-scale parallel reinforcement learning. To accelerate training, we introduce an action space which leverages the generated geometry and learned value function to sample states involving robot-object contact. When evaluated on real-world tasks including grasping, pushing, articulated object interaction, and multi-stage manipulation, ZeroBot achieves an 87% success rate with an average training time of 119 seconds. These results show the value of using image-to-3D models in a real2sim framework for rapid, autonomous robot learning.

0.74

Non-Prehensile Throwing: A Reinforcement Learning Perspective

cs.RO ·2026-09-01 ·Abdullah Mustafa, Ryo Hanai, Ixchel G. Ramirez-Alpizar, Floris Erich, Ryoichi Nakajo +2 more
published similarity 0.70
Abstract · 8 pages, 9 figures, Accepted to IEEE IROS 2026

Robotic throwing enables fast object transport and extends a robot's reachable workspace beyond traditional pick-and-place. While prehensile (grasp-based) throwing works well for graspable items, non-prehensile (grasp-free) throwing is better suited for large, heavy, and/or deformable objects. Existing approaches rely on model-based optimization with simplified contact models (e.g., dynamic grasping) and low-dimensional trajectory parameterizations, which limit solution quality and reachable workspace. We propose a reinforcement learning approach that additionally leverages sliding and rolling contact modes and directly optimizes joint-space trajectories without analytical contact models or custom parameterizations. The Markov Decision Process (MDP) is formulated as a dynamical system that evolves the robot's joint state conditioned on the throwing target, object model, and initial configuration. Joint-jerk trajectories are planned offline at a low control rate and upsampled into smooth, high-rate velocity commands for deployment. For sim-to-real transfer, we minimize the robot-dynamics gap through minimum-jerk system identification and train uncertainty-aware policies to mitigate object-modeling errors, particularly sensitivity to dynamic friction. In simulation, the policy achieves 99% success across thousands of configurations and generalizes to unseen objects. Sensitivity analysis shows robustness to mass uncertainty but high sensitivity to dynamic friction, consistent with the sliding-based release mechanism. Deployed zero-shot on a UR5e operating near its physical limits (5 m/s end-effector velocity), our method throws diverse objects including heavy (790 g) and large (20x20x28 cm) items to targets up to 350 cm distance or 180 cm elevation, achieving a 97% real-world success rate.

0.25

HiFun: a Hierarchical Framework for Efficient Functional Dexterous Manipulation Learning

cs.RO ·2026-10-14 ·Linyi Huang, Guowei Huai, Weibin Liu, Shulong Jiang, Ping Tan +3 more
code/data similarity 0.69
Abstract

While multi-fingered dexterous robot hands have the potential to provide human-level dexterity, using them for functional manipulation remains difficult because task success depends on precise contact, coordinated arm-hand motion, and reactive recovery from execution errors. Precise contact depends on complex contact dynamics that are difficult to model accurately in simulation, motivating real-world learning. However, real-world demonstrations in the full arm-hand control space are costly and noisy because each trajectory must coordinate arm motion with high-DoF multi-finger contact. Small execution deviations can further cause slipped contact or premature force application, making recovery from off-nominal contact states important for robust execution. To deal with these challenges, we propose HiFun, a hierarchical real-world RL framework for functional dexterous manipulation tasks. Our key insight is to decouple the control complexity into a functional hand skill for precise contact execution and an arm-hand coordination policy for arm control and hand-skill activation. This design enables effective real-time human intervention for reactive recovery learning and efficient data collection with Dynamic Movement Primitive (DMP) augmentation. Across six real-world tasks on two dexterous hands, HiFun achieves 98.3% average success within one hour of online training and remains robust to dynamic disturbances. The project page is available at https://hly-123.github.io/HiFun/.

0.23

Wrench-ACT: Enhancing Robot Policies for Contact Rich Behavior Using Direct Wrench Control

cs.RO ·2026-09-29 ·Johannes Hechtl, Yannik Blei, Simon Ball, Reihaneh Mirjalili, Michael Krawez +3 more
similarity 0.69
Abstract

While contact-rich manipulation requires deliberate regulation of interaction forces, recent approaches to robot manipulation learning predominantly represent actions as target positions or poses. Even methods that incorporate force sensing either use it solely as an observation or, when predicting forces as part of the output, rely on a hybrid force controller. In this paper, we propose an imitation learning policy that predicts wrenches as its sole action output for direct use by a pure force controller. Our studies suggest that force-domain imitation learning depends critically on data collection, with force-feedback teleoperation improving policy performance by capturing the operator's deliberate force regulation. Using Action Chunking with Transformers (ACT) as the base architecture, we train single-task models on bilateral wrench demonstrations and evaluate them on five contact-rich manipulation tasks. The wrench policy matches or outperforms position-based baselines across all tasks, with gains varying according to the degree of deliberate force regulation each task requires. Cross-condition ablations show that the bilateral data collection interface and the wrench action space each contribute independently to performance. To support further research, we will release over 1000 wrench-action demonstrations spanning these tasks on a companion website upon publication.

0.16

OIL: An Object Interaction Layer for Humanoid Whole-Body Control

cs.RO ·2026-10-01 ·Pranay Dugar, Mohitvishnu S. Gadde, Rajesh Mangannavar, Aayam Kumar Shrestha, Alan Fern
published similarity 0.69
Abstract

Recent progress in learned whole-body controllers for humanoid robots has enabled robust free-space motion by tracking kinematic targets such as joint or end-effector trajectories. This interface provides a useful abstraction for upstream systems, including motion capture, teleoperation, or generative models, which can specify desired motion without reasoning about forces or balance. However, this abstraction has largely been limited to robot motion, requiring task-specific controllers or retraining for object interaction. We introduce OIL, an Object Interaction Layer that extends the kinematic command interface of whole-body control to include desired object motion and contact. OIL augments a standard controller with object-centric commands and translates them into coordinated whole-body behavior while preserving locomotion and balance. This design enables a single learned policy to execute non-prehensile interactions, including pushing, pulling, two-arm pick-and-place, and locomotion-coupled transport, directly from object-level kinematic targets without task-specific retraining. In simulation, we demonstrate that object-level commands improve performance over robot-centric controllers while matching task-specific policies across variations in object properties such as mass and size. We further demonstrate zero-shot generalization to novel behavior combinations and sim-to-real transfer on the Digit humanoid robot.

0.26

DefFlow: Goal-Conditioned Deformable Object Manipulation using 3D Point Flows

cs.RO ·2026-10-16 ·Gaurav Singh, Sergio Orozco, Ryan Duong, Mete Tuluhan Akbulut, George Konidaris +1 more
similarity 0.69
Abstract

Manipulating deformable objects toward desired 3D configurations is a fundamental capability for robots operating in unstructured physical environments. However, as the range of possible initial and target configurations grows, goal-conditioned deformable manipulation requires a robot to infer increasingly diverse manipulation behaviors in addition to precise continuous actions. We introduce DefFlow, a framework for goal-conditioned manipulation of deformable objects toward a broad range of 3D configurations. DefFlow learns from demonstrations by jointly predicting the goal-conditioned 3D point flow of the robot and deformable object. We show that this formulation better captures both the manipulation decisions, such as when and where to grasp, release, or re-grasp, and the precise continuous motions required for goal reaching, rather than predicting only the robot flow. Across rope, granular-media, and cloth manipulation settings with diverse initial and target configurations, DefFlow substantially outperforms goal-conditioned action-prediction and robot-flow-only baselines on success rates and goal-distance metrics. We further demonstrate deployment of our framework on a real robot using real point-cloud observations and unseen goal configurations.

0.15

OATH: Object-Agnostic Tracking for Dexterous Hands, Enabling Rapid Physics-based Retargeting

cs.RO ·2026-10-09 ·Solvin Sigurdson, Prasanna Sriganesh, Juan Borbon, Joel Burdick, Dingqi Zhang +1 more
code/data similarity 0.69
Abstract · 8 pages, 7 figures, 3 tables. Project page: https://multiplylabs.github.io/oath/

Retargeting human demonstrations into dynamically feasible dexterous hand trajectories requires resolving complex contact physics, yet current methods either omit physical constraints or rely on computationally expensive sampling-based optimization in simulation. Reinforcement learning has previously been used to achieve planning and control through contact dynamics; however, standard policies require object-specific training and fail to generalize across arbitrary geometries. This work reframes physics-based retargeting as a residual learning problem, where we demonstrate that zero-shot generalization across objects relies on structured state representations. Specifically, formulating the observation space to include a localized contact-error signal guiding each robot link to its target coordinate on the object surface enables a single, unified residual policy to successfully grasp novel, unseen object geometries. Rolling out this policy in simulation on a kinematic reference trajectory yields a physics-based retargeter, OATH. Operating at 0.4 seconds of compute per second of reference, OATH achieves 2.4x faster-than-real-time performance and a 60-350x reduction in computational cost compared to sampling-based methods. The system recovers 58% of held-out and 54% of unseen-object DexYCB trajectories while maintaining a sub-2 cm tracking error.

0.29