CS Paper Radar

A Data-Efficient Analytical Prior Machine Learning Framework for Sound Reduction Frequency Prediction in Helmholtz Resonators

Jiaming Li

cs.LG ·submitted 2026-08-17 17:53 UTC · v2
code/dataunusual

Abstract

High-fidelity finite-element simulations can provide accurate numerical predictions for side-branch resonators, but large simulation datasets are expensive to generate and purely data-driven surrogates may become unreliable when simulation-labelled data are scarce. This study develops an analytical-prior learning framework that reuses a low-cost analytical model to improve data efficiency under limited high-fidelity simulation budgets. Two complementary routes are considered. When the analytical model remains available at inference, it is retained as an explicit baseline and the simulation data are used to learn only the analytical-to-simulation discrepancy. When a self-contained predictor is required, the analytical mapping is first distilled from abundant low-cost evaluations into a learned prior and then calibrated with the limited simulation data. The framework is evaluated on rectangular side-branch Helmholtz resonators using 86 simulation-labelled geometries and 8,998 non-overlapping analytical-only geometries. The analytical model achieved a mean absolute error (MAE) of 1.333 Hz. Direct support vector regression (SVR) achieved 3.375 Hz, while residual SVR reduced the MAE to 0.426 Hz. A direct multilayer perceptron (MLP) achieved 1.109 Hz, whereas analytical-prior pretraining reduced the error to 0.556 Hz with frozen-prior residual adaptation and 0.371 Hz with full-model fine-tuning. Across training budgets of 20 to 70 simulation-labelled cases, both analytical correction and analytical-prior pretraining consistently improved data efficiency relative to direct learning. These results show that analytical prior information can substantially improve high-fidelity prediction when simulation data are scarce, with explicit correction and prior distillation serving complementary deployment needs.

Comment
13 pages, 5 figures, 1 table

Closest papers

Nearest neighbours by meaning across the whole index.

Low-Data OOD Prediction of SAW Resonators with Simulation-Compensated Transfer Learning

eess.SY ·2026-11-11 ·Zhijie Ma, Xingyu Liu, Shuhan Chen, Fangsheng Qian, Junyan Zheng +4 more
published similarity 0.61
Abstract

Surface acoustic wave (SAW) resonators are foundational to modern radio-frequency (RF) front-end architectures. However, models trained on limited fabricated devices generalize poorly to unmeasured design regions because of process-induced variations, while finite-element method (FEM) simulations, although inexpensive, exhibit systematic offsets from measurements. To predict device performance before physical prototyping, this work presents a simulation-compensated transfer-learning framework that uses computationally efficient 2.5-D FEM simulations as physics-based anchors and learns their calibration to the measurement domain. Using 4,236 measured lithium tantalate (LiTaO3) SAW resonators and 816 unique simulated configurations, five transfer strategies are systematically benchmarked under seven out-of-distribution (OOD) protocols spanning frequency, geometry, and material shifts. The proposed framework reduces OOD prediction error by 83.54% on average (up to 97.57%) relative to the Measurement-only baseline, with the best strategy selected per case, and raises the pooled R2 of frequency prediction to 1.000, offering an economically scalable route toward physics-guided, fabrication-aware machine learning for microelectromechanical-system (MEMS) acoustic-device design.

0.32

Asymptotics-guided learning and symbolic regression for dispersive resonances

cs.LG math.NAmath-phmath.AP+1 ·2026-08-17 ·Konstantinos Alexopoulos, Josselin Garnier
unusual similarity 0.57
Abstract · 25 pages, 11 figures, 6 tables

We study resonance prediction in dispersive media, formulated as nonlinear spectral problems for volume integral operators. The main idea is to use asymptotic analysis not only as a baseline approximation, but also as a guide for constructing predictive correction models. We learn the residual between asymptotic and reference resonances using features suggested by the subwavelength expansion, including the logarithmic scales specific to two dimensions. The resulting corrections substantially improve single-resonator and dimer predictions, and symbolic regression produces compact formulas for the learned residual. The results show that asymptotic analysis can be used not only to approximate resonances, but also to design the feature space in which data-driven corrections become accurate, low-dimensional, and interpretable.

0.37

Inverse Problems in Musical Instrument Modeling: A Structured Taxonomy and Review

eess.AS ·2026-09-16 ·Xinmeng Luan, Gary Scavone
surveyunusual similarity 0.53
Abstract · 10 pages, 0 figures, conference

Inverse problems arise in a wide range of applications in musical acoustics, including physics-based sound synthesis, musical instrument modeling, design, and optimization. However, these problems are inherently challenging due to their ill-conditioned nature and strong sensitivity to measurement noise. This paper presents a structured taxonomy and systematic review of inverse problems in musical instrument modeling, providing a unified framework for their classification and analysis. We categorize inverse problems in musical instrument modeling into ten distinct tasks: mechanical parameter estimation; geometric parameter estimation; loss estimation; boundary condition estimation; modal parameter estimation; excitation and articulatory parameter estimation; sound matching or model parameter fitting; instrument design and optimization; field reconstruction, characterization and separation; physical model identification and discovery.

0.33

Explainable Machine Learning for Multilayer Planar Winding Inductance Estimation

cs.LG ·2026-09-29 ·Spyros Rigas, Theofilos Papadopoulos, Georgios Alexandridis, Antonios Antonopoulos
code/data similarity 0.53
Abstract · 10 pages

Rapid and accurate self-inductance estimation for multilayer rectangle-shaped planar windings is essential for modern high-frequency power converters, yet traditional workflows rely on complex mathematical equations, rigid monomial formulas or unexplainable black-box machine learning (ML) models that degrade severely outside their training domain. This paper introduces an explainable ML framework unifying post-hoc feature attribution (SHAP and permutation importance) with Kolmogorov-Arnold Network-guided symbolic regression via the SR-KAN framework to discover closed-form analytical equations without prior structural assumptions. Evaluated on a new open-source dataset of over 10,000 Finite Element Analysis (FEA) simulations across seven out-of-distribution (OOD) classes, standard tree-based ensembles exhibit severe extrapolation errors (> 36%), whereas the unconstrained SR-KAN expression achieves a robust OOD relative error of 8.22%. Experimental verification across 55 physical printed circuit board prototypes (up to 8 layers, with inductances from 4.11 μH to 559.27 μH) confirms that the KAN-discovered expression translates effectively to real-world hardware, predicting inductance with a mean absolute relative error of 6.26%. To support reproducible research, the complete FEA simulation dataset and prototype measurements are released open-source.

0.37

Learning Metamaterial Eigenmodes with Wavelet-Encoded Fourier Neural Operators

cs.LG cond-mat.mtrl-scics.CEphysics.comp-ph ·2026-09-08 ·Han Zhang, Alexander Ogren, Cynthia Rudin, Johann Guilleminot, L. Catherine Brinson
similarity 0.52
Abstract

Machine learning surrogates based on neural operators have shown broad applicability in solving forward PDE problems. However, eigenvalue problems, in which an eigenparameter and one of several valid eigenmodes must be simultaneously solved, remain difficult because standard operator learning formulations assume a unique input-output map. This work demonstrates that Fourier Neural Operators (FNOs), combined with wavelet-based encodings of PDE inputs, can learn and predict multiple eigenmodes of the elastic wave equation, corresponding to deformation modes of acoustic waves propagating through arbitrary metamaterial geometries. We provide a mechanistic explanation and experimental evidence for why wavelet encodings are well matched to the dual spatial-spectral structure of the FNO, enabling deterministic mode selection on both continuous-valued and binary-valued geometries within a single model, and for why prediction accuracy varies with geometric discontinuities. For metamaterial design, the resulting surrogate accelerates the simulation stage of the design cycle by three orders of magnitude relative to finite element analysis on a consumer-grade CPU, while preserving high fidelity. These results also carry broader implications for designing input encodings in other multi-mode PDE solvers based on spectral neural operators.

0.12

FoundaRF: A Physics-Informed Foundation Model Framework for Radio-Frequency Passive Components

eess.SP cs.AI ·2026-11-06 ·Houbo He, Chris Han, Hyunsu Chae, Lei Xia, Qiang Zhou +4 more
published similarity 0.50
Abstract · Accepted for publication in the proceedings of the 2026 IEEE/ACM International Conference on Computer-Aided Design (ICCAD 2026)

Designing RF/mmWave passive components is a time-consuming process that relies heavily on expert knowledge and iterative EM simulations. Although recent ML surrogate models have shown great promise in accelerating passive design, they remain task-specific and lack generalization. This paper presents FoundaRF, a foundation model framework that unifies passive layout modeling across diverse layout structures and technologies. It combines a self-supervised encoder with adaptive layout processing and physics-aware decoders to enable few-shot transfer. Experiments across four semiconductor technologies show strong generalization to unseen structures, outperforming baselines with up to a 3.3x reduction in prediction error, reducing labeled-data requirements by up to fourfold, and substantially shortening design turnaround. FoundaRF establishes a scalable and data-efficient solution for RF/mmWave passive design automation.

0.42

Influence of Geometrical Acoustic Simulator Complexity on a Trained Multisource Localizer

eess.AS ·2026-10-04 ·Fabian Staub, Nils Meyer-Kahlen, Thomas Deppisch, Sergio de las Heras, Florian Klein +2 more
similarity 0.49
Abstract · Submitted to IEEE International Conference of Acoustics, Speech, and Signal Processing (IEEE ICASSP 2027)

Learning-based acoustic sound source localization and detection (SSLD) requires large labeled datasets covering diverse acoustic conditions. Since obtaining measured data is costly, training commonly uses simulated data, while practical devices must operate under real-world conditions. However, higher simulation complexity increases data-generation cost, and the complexity required for reliable generalization remains unclear. In practice, SSLD methods often rely on efficient geometrical acoustic simulation, typically the image-source method. This work investigates how geometrical acoustic simulation complexity affects the real-world performance of a common multi-source SSLD model. We train the model with simulators ranging from anechoic conditions to high-order image-source simulations, optionally including diffuse reverberation, array simulation, and randomized image-source positions, and evaluate them on three measurement-based test datasets. Results show that anechoic simulation is insufficient, while medium-complexity image-source simulations already provide strong real-world performance. Further increases in complexity yield only marginal gains, with the best performance obtained using the highest tested image-source order, array simulation, and randomized image-source positions. For this configuration, measured-domain performance approaches within-domain simulated performance, suggesting limited benefit from further increasing simulation complexity. These findings show how the complexity-performance trade-off can be exploited in future data-driven SSLD, and highlight image-source randomization as an efficient way to improve generalization.

0.30

Investigating Composite Modeling in Multi-Objective Bayesian Optimization for Scientific Design

cs.LG stat.ML ·2026-11-10 ·Ricky Ye, Sahas Goli, Muhammad Ali, Poompol Buathong, Peter I. Frazier
similarity 0.49
Abstract · 20 pages, 6 tables

Scientific design often requires balancing competing objectives that are expensive to evaluate through experiments or simulations. Multi-objective Bayesian optimization (MOBO) addresses this challenge by using probabilistic models to guide the selection of promising designs. In many applications, tunable inputs map to observable intermediate responses, which are then combined through known functions to compute the final objectives. Prior work on Bayesian optimization of composite functions shows that learning from these intermediate responses, which we call Composite modeling, can substantially improve sampling efficiency in single-objective optimization, compared to methods that condition only on black-box observations of the objective function. The benefits of Composite modeling in MOBO, however, remain understudied. In this work, we study the benefits of Composite modeling in MOBO and investigate the factors driving variation in its gains. We first establish single-objective conditions under which intermediate observations provide no additional predictive information beyond objective values, where composite and black box methods use the same warped Gaussian process prior. Controlled numerical experiments with versions of four MOBO methods across eight synthetic and application-inspired scientific-design benchmarks examine how these conditions relate to optimization gains in the multi-objective setting, where the black box approach models the objective functions with a standard multi-output Gaussian process. Both investigations support the claim that composite modeling tends to help more when the function mapping intermediate responses to final objectives is non-bijective and non-affine.

0.20