CS Paper Radar

Low-Data OOD Prediction of SAW Resonators with Simulation-Compensated Transfer Learning

Zhijie Ma, Xingyu Liu, Shuhan Chen, Fangsheng Qian, Junyan Zheng, Nan Jun Kim, Taek Joo Lee, Hyung Kook Yang, Yansong Yang

eess.SY ·submitted 2026-11-11 07:30 UTC · v1
published

Abstract

Surface acoustic wave (SAW) resonators are foundational to modern radio-frequency (RF) front-end architectures. However, models trained on limited fabricated devices generalize poorly to unmeasured design regions because of process-induced variations, while finite-element method (FEM) simulations, although inexpensive, exhibit systematic offsets from measurements. To predict device performance before physical prototyping, this work presents a simulation-compensated transfer-learning framework that uses computationally efficient 2.5-D FEM simulations as physics-based anchors and learns their calibration to the measurement domain. Using 4,236 measured lithium tantalate (LiTaO3) SAW resonators and 816 unique simulated configurations, five transfer strategies are systematically benchmarked under seven out-of-distribution (OOD) protocols spanning frequency, geometry, and material shifts. The proposed framework reduces OOD prediction error by 83.54% on average (up to 97.57%) relative to the Measurement-only baseline, with the best strategy selected per case, and raises the pooled R2 of frequency prediction to 1.000, offering an economically scalable route toward physics-guided, fabrication-aware machine learning for microelectromechanical-system (MEMS) acoustic-device design.

Closest papers

Nearest neighbours by meaning across the whole index.

A Data-Efficient Analytical Prior Machine Learning Framework for Sound Reduction Frequency Prediction in Helmholtz Resonators

cs.LG ·2026-08-17 ·Jiaming Li
code/dataunusual similarity 0.61
Abstract · 13 pages, 5 figures, 1 table

High-fidelity finite-element simulations can provide accurate numerical predictions for side-branch resonators, but large simulation datasets are expensive to generate and purely data-driven surrogates may become unreliable when simulation-labelled data are scarce. This study develops an analytical-prior learning framework that reuses a low-cost analytical model to improve data efficiency under limited high-fidelity simulation budgets. Two complementary routes are considered. When the analytical model remains available at inference, it is retained as an explicit baseline and the simulation data are used to learn only the analytical-to-simulation discrepancy. When a self-contained predictor is required, the analytical mapping is first distilled from abundant low-cost evaluations into a learned prior and then calibrated with the limited simulation data. The framework is evaluated on rectangular side-branch Helmholtz resonators using 86 simulation-labelled geometries and 8,998 non-overlapping analytical-only geometries. The analytical model achieved a mean absolute error (MAE) of 1.333 Hz. Direct support vector regression (SVR) achieved 3.375 Hz, while residual SVR reduced the MAE to 0.426 Hz. A direct multilayer perceptron (MLP) achieved 1.109 Hz, whereas analytical-prior pretraining reduced the error to 0.556 Hz with frozen-prior residual adaptation and 0.371 Hz with full-model fine-tuning. Across training budgets of 20 to 70 simulation-labelled cases, both analytical correction and analytical-prior pretraining consistently improved data efficiency relative to direct learning. These results show that analytical prior information can substantially improve high-fidelity prediction when simulation data are scarce, with explicit correction and prior distillation serving complementary deployment needs.

0.47

20 ghz longitudinal surface acoustic wave resonators in 100-nm x-cut lithium niobate on silicon carbide

eess.SP ·2026-11-19 ·Jiajun Huang, Ziqian Yao, Tzu-Hsuan Hsu, Ian Anderson, Joshua Campbell +1 more
similarity 0.58
Abstract

Surface acoustic wave (SAW) resonators above 15~GHz require a fast acoustic mode that retains strong electromechanical coupling ($k^2$). This work reports longitudinal SAW (L-SAW) resonators designed for high $k^2$ in 100-nm X-cut lithium niobate (LN) on 4H silicon carbide (SiC), operating up to 21.7~GHz and reaching a $k^2$ of 8.1\%, a maximum Bode $Q$ of 70, and a figure of merit (FoM) of 5.7 at 20.24~GHz. In this thin-film waveguide, shrinking the wavelength ($λ$) keeps the normalized LN thickness ($h_\mathrm{LN}/λ$) large, sustaining both $k^2$ and acoustic confinement. Conversely, increasing $λ$ from 292 to 471~nm lowers $h_\mathrm{LN}/λ$ from 0.34 to 0.21 and raises the L-SAW phase velocity from 6.32 to 7.05~km/s, within 1.1\% of the 7126-m/s shear-wave velocity of 4H-SiC. As the velocity approaches this limit, more of the acoustic energy spreads into the non-piezoelectric SiC, and $k^2$ falls from its 8.1\% peak at $λ= 322$~nm to 1.7\% at $λ= 471$~nm. No L-SAW resonance is observed for $λ\geq 518$~nm ($h_\mathrm{LN}/λ\leq 0.19$), where the mode becomes leaky. Overall, the FoM stays within 5\% of its maximum for $h_\mathrm{LN}/λ$ between 0.26 to 0.31, defining a design window for L-SAW resonators in thin LN on SiC at K-band and beyond.

0.27

Cross-platform frequency-domain physical neural networks with identical models and parameters

eess.SP physics.opticsphysics.app-ph ·2026-10-01 ·Zichen Xi, Jun Ji, Liyang Jin, Hsuan-Hao Lu, Wenjie Xiong +1 more
similarity 0.54
Abstract

Frequency-domain physical neural networks (PNNs) have emerged as a promising analog computing paradigm, achieving a reduced number of devices, enhanced robustness, and high inference accuracy. However, existing demonstrations across various physical domains, such as optics, acoustics, and electronics, are mostly specific to the target devices or platforms, usually requiring hardware-dependent models and post-fabrication parameter tuning. Here, we demonstrate cross-platform implementations of frequency-domain PNN across different wave-based computing platforms using identical, pre-trained parameters. By exploiting shared second-order nonlinear processes, the PNN model is implemented on optical, microwave, and acoustic-wave platforms without the need of fine tuning the parameters. Evaluated on a unified four-class classification task, the frequency-domain PNN achieves high inference accuracies of 97.6% in optics, 98.4% in electronics, and 98.2% in mechanics. Further, we systematically compare related performance metrics across these three distinct physical domains, paving the way to a universal neural network across different physical platforms.

0.24

Machine Learning Assisted Inverse Design of Pixelated mmWave Patch Antennas

eess.SP cs.AI ·2026-08-24 ·Nadeem Rather, Holger Claussen, Lester Ho
published similarity 0.53
Abstract

A machine learning-assisted framework for the inverse design of pixelated millimetre-wave patch antennas targeting the 22--30 GHz band is presented. The antenna surface is represented as a 19x23 binary pixel grid on a Rogers RT/duroid 5880 substrate, where each pixel is either metal or empty, with a continuous electrical path from the feed enforced by design. An initial dataset of approximately 6,000 full-wave CST simulations was collected from structured random pixel patterns, of which only around 40% achieved a resonance with |S11| <= -10 dB anywhere in the band, resulting in an imbalanced dataset. To improve simulation efficiency, an XGBoost binary classifier was trained on this data to distinguish resonant from non-resonant patterns before simulation. Using the classifier as a pre-simulation filter, an additional 4,000 patterns were selected and simulated, raising the overall proportion of resonant designs in the combined 10,000-sample dataset from approximately 40% to 52%. A hybrid CNN-BiLSTM forward surrogate was then trained on this augmented dataset to predict the full complex S11 response across 801 frequency points, using a physics-guided composite loss that explicitly emphasises resonance dip accuracy. Finally, an inverse design model was developed that optimises in a compact 64-dimensional latent space using gradient descent to generate pixel patterns matching a desired S11 specification. The results show good agreement between the surrogate-predicted and CST-simulated |S11| responses for the generated designs and demonstrate the feasibility of automatically designing and reconfiguring antenna structures.

0.64

Few-Shot Beam Selection for Embodied AI via In-Context Learning and Conformal Prediction

eess.SP ·2026-11-05 ·Weicao Deng, Ruihan Li, Feihang Xu, Min Li
similarity 0.52
Abstract · 6 pages, 4 figures. Accepted by the 2026 IEEE International Symposium on Information Theory Workshop (ISIT 2026 Workshop) on Reliable Machin…

Millimeter-wave (mmWave) communications are essential for supporting massive multimodal sensory data exchange in Embodied Artificial Intelligence (EAI) systems. However, fast and reliable beam selection for mmWave communication remains a critical bottleneck due to the prohibitive overhead associated with conventional beam training. Although location-aided beam prediction offers a promising alternative, its performance is often limited by localization errors and the need for extensive training data. To address these challenges, we propose a novel framework termed In-Context Learning driven Cross-Validation Conformal Prediction (ICL+CVCP) for beam prediction. The proposed framework utilizes the training-free adaptation capability of ICL, enabling effective operation with only a small number of demonstration samples and eliminating the need for large-scale data collection and model fine-tuning. In addition, the CVCP module constructs compact, distribution-free candidate beam sets that provably contain the optimal beam with a user-defined probability. Experimental results confirm that ICL+CVCP consistently satisfies the desired empirical coverage while significantly reducing pilot overhead and computational latency, thereby meeting the stringent reliability and efficiency requirements of EAI applications.

0.28

Learning Metamaterial Eigenmodes with Wavelet-Encoded Fourier Neural Operators

cs.LG cond-mat.mtrl-scics.CEphysics.comp-ph ·2026-09-08 ·Han Zhang, Alexander Ogren, Cynthia Rudin, Johann Guilleminot, L. Catherine Brinson
similarity 0.51
Abstract

Machine learning surrogates based on neural operators have shown broad applicability in solving forward PDE problems. However, eigenvalue problems, in which an eigenparameter and one of several valid eigenmodes must be simultaneously solved, remain difficult because standard operator learning formulations assume a unique input-output map. This work demonstrates that Fourier Neural Operators (FNOs), combined with wavelet-based encodings of PDE inputs, can learn and predict multiple eigenmodes of the elastic wave equation, corresponding to deformation modes of acoustic waves propagating through arbitrary metamaterial geometries. We provide a mechanistic explanation and experimental evidence for why wavelet encodings are well matched to the dual spatial-spectral structure of the FNO, enabling deterministic mode selection on both continuous-valued and binary-valued geometries within a single model, and for why prediction accuracy varies with geometric discontinuities. For metamaterial design, the resulting surrogate accelerates the simulation stage of the design cycle by three orders of magnitude relative to finite element analysis on a consumer-grade CPU, while preserving high fidelity. These results also carry broader implications for designing input encodings in other multi-mode PDE solvers based on spectral neural operators.

0.12

Lithium Niobate Surface-Acoustic-Wave Resonator for Very-High-Frequency Isolated Power Conversion

eess.SY physics.app-ph ·2026-10-02 ·Liyang Jin, Zhiyang Cao, Zichen Xi, Jun Ji, Yizheng Zhu +2 more
unusual similarity 0.51
Abstract

Piezoelectric devices offer a promising magnetic-free alternative for high-frequency power electronics, enabling compact energy transfer with inherent galvanic isolation. Here we demonstrate a lithium niobate surface acoustic wave (SAW) resonator that enables isolated power transfer and addresses the challenges in existing piezoelectric devices for power applications, including operation frequencies, power delivery figure of merit (FOM), power handling, and electrical isolation. Our application-optimized 40-MHz SAW resonator, with the two electrically isolated interdigital transducers (IDTs) and acoustic Bragg mirrors, achieves a 25.7 W output power at a less than 15 °C temperature rise with only passive cooling through the back mounting side, and an isolation voltage of 2.17 kV. In DC-AC power conversion, we demonstrate a peak efficiency of 93.8 %, a power delivery FOM of 13.47 mW/V$^2$ and a peak chip power density of 81.7 W/cm$^3$. DC-DC conversion is also demonstrated by connecting a diode rectifier to the output IDT, despite efficiency degrading to 52.7 %. Our results advance SAW devices as one of the core components for next-generation very-high-frequency, miniaturized, high-density, magnetic-free, isolated power converters.

0.26

FoundaRF: A Physics-Informed Foundation Model Framework for Radio-Frequency Passive Components

eess.SP cs.AI ·2026-11-06 ·Houbo He, Chris Han, Hyunsu Chae, Lei Xia, Qiang Zhou +4 more
published similarity 0.51
Abstract · Accepted for publication in the proceedings of the 2026 IEEE/ACM International Conference on Computer-Aided Design (ICCAD 2026)

Designing RF/mmWave passive components is a time-consuming process that relies heavily on expert knowledge and iterative EM simulations. Although recent ML surrogate models have shown great promise in accelerating passive design, they remain task-specific and lack generalization. This paper presents FoundaRF, a foundation model framework that unifies passive layout modeling across diverse layout structures and technologies. It combines a self-supervised encoder with adaptive layout processing and physics-aware decoders to enable few-shot transfer. Experiments across four semiconductor technologies show strong generalization to unseen structures, outperforming baselines with up to a 3.3x reduction in prediction error, reducing labeled-data requirements by up to fourfold, and substantially shortening design turnaround. FoundaRF establishes a scalable and data-efficient solution for RF/mmWave passive design automation.

0.42