CS Paper Radar

3D Gaussian Accelerated Ray Tracing: Fast training through particle-based backward propagation

Laurent Vit, Oliver Batchelor, Richard Green

cs.GR cs.CV ·submitted 2026-08-18 02:50 UTC · v1

Abstract

3D Gaussian Splatting has made Gaussian primitives a highly efficient representation for real-time novel view synthesis, but its rasterisation-based formulation relies on screen-space approximations that limit accurate view-dependent ordering and the integration of secondary ray effects such as reflections, refractions, and shadows. Gaussian ray tracing addresses these limitations by evaluating explicit ray-primitive intersections, yet it remains costly to train. We observe that the main bottleneck is not ray traversal alone, but the pixel-centric backward propagation, where many threads concurrently accumulate gradients into the same primitive parameters, causing severe atomic contention and thread serialisation. We present 3DGART, a practical training framework for ray-traced Gaussian rendering. Our key idea is to reorganise backward propagation around primitives rather than pixels. Using conservative perspective-correct screen-space bounds, we build a compact intermediate buffer and a tile-primitive mapping that allows each thread to accumulate the contribution of one primitive over its covered pixels within a tile. This transforms gradient computation from a contention-heavy scatter operation into a structured gather-like process. On Mip-NeRF 360, 3DGART achieves an $\approx 3-3.5\times$ raw training speedup over per-pixel baseline and $\approx4 \times$ over 3DGRT on Mip-NeRF 360 while improving quality. More importantly, 3DGART makes fully ray-traced Gaussian training practical, reaching runtimes competitive with rasterisation-based pipelines while preserving benefits of ray tracing.

Closest papers

Nearest neighbours by meaning across the whole index.

A Hybrid and Hierarchical Ray Tracing Method for Efficient 3D Gaussian Rendering

cs.AR cs.GR ·2026-10-09 ·Tiancheng Zhao, Sixu Li, Yuzhou Chen, Hengyu Ding, Zhiming Pan +1 more
similarity 0.80
Abstract

3D Gaussian Splatting (3DGS) is a powerful representation for real-time neural reconstruction and rendering. While existing 3DGS systems rely on rasterization for efficiency, recent work explores ray tracing to enable secondary lighting, highly distorted cameras, and depth-of-field effects. However, compared with rasterization, ray-traced 3DGS introduces three major challenges: (1) the highly non-uniform spatial distribution of massive numbers of Gaussian primitives creates severe load imbalance; (2) neighboring pixels often generate rays with highly similar traversal paths, leading to substantial redundant traversal overhead; and (3) supporting both Gaussian and triangle primitives yields heterogeneous intersection workloads that are not well matched to existing GPU architectures. We present H2-Ray, a hybrid and hierarchical ray tracing architecture for efficient 3D Gaussian rendering. H2-Ray introduces three techniques. Load-Balanced Spatial BVH (LB-SBVH) partitions the scene into uniform grids and uses density-aware representations to convert an imbalanced global workload into balanced local traversal units. Ray-Cluster Path Reuse (RCPR) lets a proxy ray share traversal state with neighboring rays to amortize redundant traversal. The Unified Intersection Engine (UIE) supports mixed Gaussian and triangle intersections through a mode-multiplexed datapath that shares 40% of its floating-point units across both primitive types. Across 8 scenes, H2-Ray achieves a geometric-mean speedup of 3.77x and a maximum speedup of 9.26x over RaySplats on the NVIDIA RTX A5000, combining a cycle-accurate model of the modified RT Core with measured CUDA timings.

0.04

FastGRT: Accelerating Training of 3D Gaussian Ray Tracing

cs.CV cs.LG ·2026-11-08 ·Meet Banthia, Xiaoteng Liu, Hexu Zhao, Aurojit Panda, Jinyang Li
code/data similarity 0.80
Abstract

Ray Tracing enables rendering capabilities that are difficult to achieve with rasterization-based approaches such as 3D Gaussian Splatting (3DGS). However, the training cost of Gaussian-based ray tracing (GRT) is much higher than that of 3DGS. In this paper, we study how ray tracing using Gaussians executes on GPUs and show that a considerable fraction of the training cost arises from how the computation is organized. We develop FastGRT, which decouples ray traversal from blending and reuses work done in the forward pass for the backward pass. FastGRT further incorporates optimizations such as fast gradient accumulation and a hybrid BVH update strategy to tackle other major bottlenecks in the training pipeline. We implement FastGRT in Vulkan. To the best of our knowledge, it is the first Vulkan-based GRT implementation that supports both training and rendering. Compared to 3DGRT, FastGRT improves training time by 1.9$\times$ to 4.97$\times$, while preserving the original rendering formulation. Our code is open source.

0.23

Differentiable Voronoi Ray Tracing Beyond Rasterization Speeds

cs.CV ·2026-08-18 ·Bernardo Taveira, Carl Lindström, Joakim Johnander, Fredrik Kahl
hot direction similarity 0.73
Abstract

Real-time novel view synthesis is dominated by rasterized explicit primitives. These projection-based pipelines provide high throughput but require specialized extensions for non-pinhole effects such as distortion, rolling shutter, and depth of field. Ray-based rendering expresses these effects naturally but is generally assumed too slow for competitive real-time rendering. We analyze the factors governing throughput in differentiable Voronoi ray tracing and identify traversal length, per-cell work, and memory locality as principal determinants. Guided by this, we introduce VoroTracing, which co-designs the scene representation, optimization, and GPU execution to reduce these costs. Compact octahedral appearance textures reduce memory traffic, while surface-concentrated opacity promotes early termination. The fixed-budget representation is optimized without pruning or densification and rendered with a GPU implementation designed for coherent traversal. On Mip-NeRF 360, VoroTracing renders at 623 FPS on an RTX 5090, providing $3.2\times$ the throughput of the fastest prior ray-based method and $2.8\times$ that of 3D Gaussian Splatting, while maintaining competitive reconstruction quality. Our renderer supports fisheye, rolling-shutter, motion-blur, and depth-of-field effects through ray generation and sampling, requiring no specialized rasterization. These results show that real-time throughput can be achieved with the flexibility of ray-based rendering. We release our source code, see https://research.zenseact.com/publications/vorotracing

0.58

Ray-by-Ray: Fine-Grained Resource Management for GPU Ray Tracing Units

cs.AR ·2026-10-22 ·Junrui Pan, Cesar Avalos Baddouh, Kai Ze Ee, Timothy G. Rogers
top venuecode/data similarity 0.72
Abstract · to be published in 59th IEEE/ACM International Symposium on Microarchitecture

Ray tracing (RT) generates photorealistic images by simulating the physical behavior of light as it interacts with surfaces in a virtual scene. In film production and high-end rendering pipelines, this technique computes global illumination, reflections, refractions, and soft shadows by tracing millions of light rays per frame and accurately modeling their bounces and attenuation. Contemporary GPUs incorporate specialized ray tracing hardware to accelerate key operations in the traversal pipeline. By accelerating these stages in hardware, the unit enables real-time ray tracing for complex scenes that previously required offline computation. However, ray tracing introduces substantial control and data divergence. Each ray may traverse a different set of nodes in the acceleration structure, encounter distinct materials, or terminate at varying depths. This irregularity reduces thread coherence and exposes a fundamental disparity between the GPU SIMT and per-thread execution model of dedicated RT units, where each ray progresses independently. In this work, we seek to validate assumptions made in open-source infrastructure and identify potential inefficiencies in resource management within the ray tracing pipeline. To address inefficiency caused by mismatches between SIMT and RT granularities, we propose Ray-by-Ray, which decomposes on-chip buffers into the granularity of individual rays and introduces lightweight management structures that enable more warps to run in parallel without increasing buffer capacity. This approach improves ray tracing unit utilization and increases memory-level parallelism. Experimental results show that Ray-by-Ray achieves an average performance improvement of 1.91x over the baseline, with an area overhead of 0.19\%.

0.34

Fast and Compact 3D Gaussian Splatting with Polarized Opacity Prior

cs.CV ·2026-08-23 ·Zi-Ming Wang, Kai-Wen Duan, Kowei Huang, Akihiro Sugimoto, Shang-Hong Lai
top venue similarity 0.72
Abstract

3D Gaussian Splatting (3DGS) achieves state-of-the-art rendering quality at real-time speeds but suffers from "model bloat" - a large number of redundant, low-opacity Gaussians that inflate memory usage and training costs. This inefficiency stems from the standard "densify-then-prune" paradigm, which expands the model aggressively before relying on pruning to achieve compactness. To mitigate this problem, we present an efficient training framework that builds an intrinsically compact representation, replacing the conventional densify-then-prune cycle. Our method leverages a synergistic design: an L2 reconstruction loss to provide error-proportional gradients that stabilize optimization, and a novel Polarized Opacity Prior (POP) to actively manage the Gaussian population. POP steers informative primitives toward full opacity and uninformative ones toward transparency, enabling natural pruning and accelerating rendering through Early Ray Termination. Experiments on three public datasets demonstrate that our approach consistently achieves accelerated 3DGS training with significantly fewer Gaussians while maintaining comparable visual reconstruction quality. These results show that the proposed framework provides a simple and effective path toward fast and inherently compact 3DGS training.

0.39

Accelerating 3D Gaussian Splatting Training through Selective Freezing and Computation Caching

cs.AR ·2026-11-17 ·He Zhu, Zhiheng Dai, Zihan Liu, Ruyang Li, Hui Wei +7 more
similarity 0.71
Abstract

3D Gaussian Splatting (3DGS) becomes a key primitive for immersive 3D experiences. However, its applicability is limited by its long training overhead. Although prior work has shown that gradient accumulation is the dominant bottleneck in training, existing works either have limited speedup or degrade reconstruction quality. To address this issue, we present ElsaGS, an algorithm-hardware co-designed framework that accelerates 3DGS training with negligible accuracy degradation. Our key observation is that most Gaussians converge early, while later iterations only refine a small subset of Gaussians. Thus, we propose a technique, progressive Gaussian freezing, which dynamically freezes well-converged Gaussians and caches their cumulative contributions, thereby reducing computations in both forward rasterization and backward gradient accumulation. To make caching efficient, we further propose an architecture, ElsaGS core, which integrates a pixel-parallel rasterization array with a set-associative frozen Gaussian cache, FGcache. Across three 3DGS datasets, ElsaGS freezes up to 90% of Gaussians with negligible quality loss and achieves up to 20.6x end-to-end speedup and 99.4% energy reduction over GPUs.

0.18

ByteSplat: Efficient Distributed 3D Gaussian Splatting Training via Intra- and Inter-GPU communication reduction

cs.DC ·2026-10-02 ·Shuo Wu, He Zhu, Han Zhao, Xiaohui Zhang, Yaqian Zhao +7 more
similarity 0.71
Abstract

3D Gaussian Splatting (3DGS) enables photorealistic scene reconstruction, but training large-scale scenes requires substantial memory and computation. Distributing training across multiple GPUs increases available memory capacity, yet its performance is strictly constrained by data movement. We identify two dominant bottlenecks: repeated off-chip memory accesses during forward and backward rasterization, and inter-GPU communication of partial Gaussian gradients. To address these bottlenecks, we present ByteSplat, a distributed 3DGS training framework that jointly reduces intra- and inter-GPU data movement. First, ByteSplat fuses forward rasterization and backward rasterization into a single GPU kernel, retaining intermediate results on-chip to eliminate redundant off-chip transfers. Second, to alleviate the increased on-chip storage by fused rasterization, ByteSplat introduces hardware-aware pruning that considers both rendering quality and per-tile shared-memory constraints, increasing the overall performance of fused execution. Lastly, ByteSplat exploits gradient sparsity to eliminate zero partial gradients from inter-GPU communication. GPU-efficient encoder and decoder kernels compact the remaining records and directly aggregate the received gradients on their owner GPUs, reducing both communication volume and local aggregation overhead. We evaluate ByteSplat across six datasets. Compared with the baseline, ByteSplat reduces intra-GPU off-chip traffic and backward inter-GPU communication volume by 63.4% and 65.8%, respectively. On eight GPUs, ByteSplat achieves up to 6.1$\times$ training speedup while preserving reconstruction quality.

0.15

TruncGradGS: Improved 3D Gaussian Splatting via Truncated Gradient Updates

cs.CV cs.AIcs.GR ·2026-09-03 ·Theo Morales, Nhat-Quynh Le-Pham, Robin Atkins, Binh-Son Hua
published similarity 0.68
Abstract · Accepted at Pacific Graphics 2026

3D Gaussian Splatting has become a de facto scene representation for novel view synthesis, yet robustly learning 3D Gaussian primitives from visual input remains challenging. Standard optimization relies on gradient-based updates, but a common issue is the gradient vanishing phenomenon: a pixel far from a Gaussian primitive often has diminishing gradient magnitudes to influence primitive attributes, resulting in suboptimal scene reconstruction. In this paper, we propose a method to address gradient vanishing with a piecewise truncated gradient formulation that improves the optimization stability and robustness to initializations. We show that our method consistently improves 3D Gaussian Splatting with random and COLMAP initializations while being generalizable across static and dynamic Gaussian Splatting. As a by-product, we also examine the limitations of current benchmarks for dynamic scenes, and introduce a novel dataset for benchmarking dynamic Gaussian Splatting using synthetic 3D scenes. We demonstrate the effectiveness of our method in both static and dynamic settings for the public benchmarks and our proposed dataset.

0.29