CS Paper Radar

Ray-by-Ray: Fine-Grained Resource Management for GPU Ray Tracing Units

Junrui Pan, Cesar Avalos Baddouh, Kai Ze Ee, Timothy G. Rogers

cs.AR ·submitted 2026-10-22 17:48 UTC · v1
top venuecode/data

Abstract

Ray tracing (RT) generates photorealistic images by simulating the physical behavior of light as it interacts with surfaces in a virtual scene. In film production and high-end rendering pipelines, this technique computes global illumination, reflections, refractions, and soft shadows by tracing millions of light rays per frame and accurately modeling their bounces and attenuation. Contemporary GPUs incorporate specialized ray tracing hardware to accelerate key operations in the traversal pipeline. By accelerating these stages in hardware, the unit enables real-time ray tracing for complex scenes that previously required offline computation. However, ray tracing introduces substantial control and data divergence. Each ray may traverse a different set of nodes in the acceleration structure, encounter distinct materials, or terminate at varying depths. This irregularity reduces thread coherence and exposes a fundamental disparity between the GPU SIMT and per-thread execution model of dedicated RT units, where each ray progresses independently. In this work, we seek to validate assumptions made in open-source infrastructure and identify potential inefficiencies in resource management within the ray tracing pipeline. To address inefficiency caused by mismatches between SIMT and RT granularities, we propose Ray-by-Ray, which decomposes on-chip buffers into the granularity of individual rays and introduces lightweight management structures that enable more warps to run in parallel without increasing buffer capacity. This approach improves ray tracing unit utilization and increases memory-level parallelism. Experimental results show that Ray-by-Ray achieves an average performance improvement of 1.91x over the baseline, with an area overhead of 0.19\%.

Comment
to be published in 59th IEEE/ACM International Symposium on Microarchitecture

Closest papers

Nearest neighbours by meaning across the whole index.

Differentiable Voronoi Ray Tracing Beyond Rasterization Speeds

cs.CV ·2026-08-18 ·Bernardo Taveira, Carl Lindström, Joakim Johnander, Fredrik Kahl
hot direction similarity 0.76
Abstract

Real-time novel view synthesis is dominated by rasterized explicit primitives. These projection-based pipelines provide high throughput but require specialized extensions for non-pinhole effects such as distortion, rolling shutter, and depth of field. Ray-based rendering expresses these effects naturally but is generally assumed too slow for competitive real-time rendering. We analyze the factors governing throughput in differentiable Voronoi ray tracing and identify traversal length, per-cell work, and memory locality as principal determinants. Guided by this, we introduce VoroTracing, which co-designs the scene representation, optimization, and GPU execution to reduce these costs. Compact octahedral appearance textures reduce memory traffic, while surface-concentrated opacity promotes early termination. The fixed-budget representation is optimized without pruning or densification and rendered with a GPU implementation designed for coherent traversal. On Mip-NeRF 360, VoroTracing renders at 623 FPS on an RTX 5090, providing $3.2\times$ the throughput of the fastest prior ray-based method and $2.8\times$ that of 3D Gaussian Splatting, while maintaining competitive reconstruction quality. Our renderer supports fisheye, rolling-shutter, motion-blur, and depth-of-field effects through ray generation and sampling, requiring no specialized rasterization. These results show that real-time throughput can be achieved with the flexibility of ray-based rendering. We release our source code, see https://research.zenseact.com/publications/vorotracing

0.55

3D Gaussian Accelerated Ray Tracing: Fast training through particle-based backward propagation

cs.GR cs.CV ·2026-08-18 ·Laurent Vit, Oliver Batchelor, Richard Green
similarity 0.72
Abstract

3D Gaussian Splatting has made Gaussian primitives a highly efficient representation for real-time novel view synthesis, but its rasterisation-based formulation relies on screen-space approximations that limit accurate view-dependent ordering and the integration of secondary ray effects such as reflections, refractions, and shadows. Gaussian ray tracing addresses these limitations by evaluating explicit ray-primitive intersections, yet it remains costly to train. We observe that the main bottleneck is not ray traversal alone, but the pixel-centric backward propagation, where many threads concurrently accumulate gradients into the same primitive parameters, causing severe atomic contention and thread serialisation. We present 3DGART, a practical training framework for ray-traced Gaussian rendering. Our key idea is to reorganise backward propagation around primitives rather than pixels. Using conservative perspective-correct screen-space bounds, we build a compact intermediate buffer and a tile-primitive mapping that allows each thread to accumulate the contribution of one primitive over its covered pixels within a tile. This transforms gradient computation from a contention-heavy scatter operation into a structured gather-like process. On Mip-NeRF 360, 3DGART achieves an $\approx 3-3.5\times$ raw training speedup over per-pixel baseline and $\approx4 \times$ over 3DGRT on Mip-NeRF 360 while improving quality. More importantly, 3DGART makes fully ray-traced Gaussian training practical, reaching runtimes competitive with rasterisation-based pipelines while preserving benefits of ray tracing.

0.45

FastGRT: Accelerating Training of 3D Gaussian Ray Tracing

cs.CV cs.LG ·2026-11-08 ·Meet Banthia, Xiaoteng Liu, Hexu Zhao, Aurojit Panda, Jinyang Li
code/data similarity 0.72
Abstract

Ray Tracing enables rendering capabilities that are difficult to achieve with rasterization-based approaches such as 3D Gaussian Splatting (3DGS). However, the training cost of Gaussian-based ray tracing (GRT) is much higher than that of 3DGS. In this paper, we study how ray tracing using Gaussians executes on GPUs and show that a considerable fraction of the training cost arises from how the computation is organized. We develop FastGRT, which decouples ray traversal from blending and reuses work done in the forward pass for the backward pass. FastGRT further incorporates optimizations such as fast gradient accumulation and a hybrid BVH update strategy to tackle other major bottlenecks in the training pipeline. We implement FastGRT in Vulkan. To the best of our knowledge, it is the first Vulkan-based GRT implementation that supports both training and rendering. Compared to 3DGRT, FastGRT improves training time by 1.9$\times$ to 4.97$\times$, while preserving the original rendering formulation. Our code is open source.

0.23

A Hybrid and Hierarchical Ray Tracing Method for Efficient 3D Gaussian Rendering

cs.AR cs.GR ·2026-10-09 ·Tiancheng Zhao, Sixu Li, Yuzhou Chen, Hengyu Ding, Zhiming Pan +1 more
similarity 0.72
Abstract

3D Gaussian Splatting (3DGS) is a powerful representation for real-time neural reconstruction and rendering. While existing 3DGS systems rely on rasterization for efficiency, recent work explores ray tracing to enable secondary lighting, highly distorted cameras, and depth-of-field effects. However, compared with rasterization, ray-traced 3DGS introduces three major challenges: (1) the highly non-uniform spatial distribution of massive numbers of Gaussian primitives creates severe load imbalance; (2) neighboring pixels often generate rays with highly similar traversal paths, leading to substantial redundant traversal overhead; and (3) supporting both Gaussian and triangle primitives yields heterogeneous intersection workloads that are not well matched to existing GPU architectures. We present H2-Ray, a hybrid and hierarchical ray tracing architecture for efficient 3D Gaussian rendering. H2-Ray introduces three techniques. Load-Balanced Spatial BVH (LB-SBVH) partitions the scene into uniform grids and uses density-aware representations to convert an imbalanced global workload into balanced local traversal units. Ray-Cluster Path Reuse (RCPR) lets a proxy ray share traversal state with neighboring rays to amortize redundant traversal. The Unified Intersection Engine (UIE) supports mixed Gaussian and triangle intersections through a mode-multiplexed datapath that shares 40% of its floating-point units across both primitive types. Across 8 scenes, H2-Ray achieves a geometric-mean speedup of 3.77x and a maximum speedup of 9.26x over RaySplats on the NVIDIA RTX A5000, combining a cycle-accurate model of the modified RT Core with measured CUDA timings.

0.04

HyperDrone: Simulation-to-Reality Transfer at Millions of Frames per Second

cs.RO cs.AIcs.LGeess.SY ·2026-10-20 ·Jonas Eschmann, Giuseppe Loianno
publishedhot direction similarity 0.68
Abstract · Accepted at Conference on Robot Learning (CoRL 2026)

We present HyperDrone, an extremely fast quadrotor simulator focused on high-performance batch rendering that is more than 20x faster than existing state-of-the-art batch quadrotor simulators. HyperDrone combines highly optimized multirotor dynamics with HyperLux, a new ray-tracing engine that supports Nvidia OptiX, Vulkan, Apple Metal and WebGPU backends that takes full advantage of modern ray-tracing hardware, capable of running both components entirely on the GPU. HyperLux renders RGB, depth, semantic/instance segmentation, surface normals and optical flow observations at configurable levels of fidelity, including reflections, realistic lighting, motion blur, anti-aliasing, and Physically Based Rendering (PBR). Even in the highest-fidelity settings, HyperLux achieves millions of Frames Per Second (FPS) on consumer-grade GPUs while rendering realistic 3D scenes. We demonstrate the merits of HyperDrone by training a vision-based yaw-control policy purely in simulation and transferring it to a real small-scale quadrotor (Crazyflie) with a camera, running completely onboard.

0.44

From Splats to Silicon: Rethinking Computational Efficiency of 3DGS

cs.AR cs.AIcs.GR ·2026-09-05 ·Minnan Pei, Qiwei Dong, Yihan Zhou, Gang Li, Yuchen Zhu +5 more
similarity 0.66
Abstract

3D Gaussian splatting (3DGS) represents scenes with explicit primitives and supports real-time novel-view synthesis, yet its system efficiency varies substantially across scenes, viewpoints, rendering paths, and platform constraints. Existing studies pursue efficiency through representation and algorithm design, GPU runtime optimization, and architectural support, but their reported gains correspond to different points along the rendering and update paths. Connecting these indicators to end-to-end system benefit requires tracing how each optimization changes Gaussian selection, screen-space work, data movement, and stage or frame time. We therefore use a workload-centric framework to connect representation and algorithm research, GPU runtimes, and hardware architectures and to identify recurring workload patterns. We complement literature analysis with reproduced measurements and controlled GPU profiling of selected implementations, relating workload counts to stage time and memory traffic. Together, these comparisons show that system gains depend on workload reductions reaching downstream execution, granularity matching each stage, and the cost of data transfers, synchronization, and cached results, gradients, and optimizer data. Building on these findings, we discuss more consistent evaluation under rendering-quality constraints and identify key directions for future system design.

0.14

Mitigating SM-Level Load Imbalance in 3D Gaussian Splatting on GPUs

cs.DC cs.CVcs.GRcs.LG ·2026-11-09 ·Junha Ryu, Hoi-Jun Yoo
similarity 0.66
Abstract

3D Gaussian Splatting (3DGS) enables photorealistic, real-time rendering on commodity GPUs and is increasingly adopted in generative world models and autonomous driving simulators. However, existing optimizations rely on algorithmic changes that often require retraining, or on specialized accelerators that lack flexibility across evolving 3DGS variants. In this paper, we identify a fundamental inefficiency in GPU-based 3DGS rendering: severe SM-level load imbalance caused by uneven workloads across screen tiles. This imbalance creates a long execution tail, leaving most SMs idle while a few process computationally intensive tiles, particularly in large-scale urban scenes. To address this, we present a software-defined GPU scheduling approach that mitigates the execution tail. Our approach uses a persistent kernel to schedule heavy tiles first and selectively chunks outlier tiles across multiple CTAs. A lightweight per-frame policy determines when and how much to chunk using tile statistics already available in the rendering pipeline. Our approach requires neither retraining nor specialized hardware and can be applied orthogonally to existing optimizations across diverse 3DGS variants. Averaged per scene, it accelerates alpha blending by up to 2.93x on a large-scale urban scene, and by up to 5.6x on its most imbalanced frames, while retaining the original alpha blending formulation.

0.14

RT-HiSS: Ray Tracing Accelerated High Dimensional Vector Similarity Searches

cs.DC cs.DB ·2026-09-02 ·Revanth Reddy Munugala, Michael Gowanlock
publishedtheory similarity 0.65
Abstract · To appear in the Proceedings of the 2026 International Conference for High Performance Computing, Networking, Storage and Analysis (SC'26)

Recent GPU generations include special-purpose ray tracing (RT) cores for graphics applications. While RT cores are primarily used for rendering, recent works show they can be leveraged for general-purpose tasks, including similarity searches. However, existing approaches do not support datasets exceeding three dimensions. In this work, we propose RT-HiSS, the first exact GPU RT-core-based similarity search algorithm for high-dimensional datasets. GPU similarity search often scales poorly for large datasets with substantial search distances. To address this, RT-HiSS uses RT cores for fast index construction and searches, followed by candidate refinement on CUDA cores. We introduce a two-pass approach to estimate an upper bound on result size, enabling efficient batching under GPU memory constraints with near-perfect load balancing. Additionally, we examine shared memory tiling and compressed result masks to improve GPU resource utilization. RT-HiSS yields speedups up to 8.37$\times$ over competitive state-of-the-art GPU algorithms across six real-world datasets.

0.31