CS Paper Radar

Low-Power, Neuromorphic, Acoustic Anomaly Detection for Persistent Machine Monitoring

Steven C. Nesbit, Victor M. Vergara, Michael A. Felix, Evan T. Kain, Luis R. García Carrillo, Gerd J. Kunde, Andrew T. Sornborger

cs.NE cs.AIcs.ETcs.LGcs.SDeess.AS ·submitted 2026-08-18 21:46 UTC · v1
benchmark

Abstract

Persistent acoustic monitoring can detect machine faults without physical contact, but always-on inference is constrained by power, latency, and deployment complexity. We demonstrate autoencoder-based acoustic anomaly detection on an Intel Loihi 2 neuromorphic processor under clean and noisy conditions. Log-mel features are computed off chip; normalization, autoencoder inference, L1 reconstruction scoring, and thresholding run on chip. In a clean, microphone-position-invariant ToyADMOS ToyCar benchmark, the on-chip model achieves 0.9959 AUC and 0.9785 standardized pAUC at maximum false-positive rate 0.1. In the DCASE 2026 Task 2 ToyCar noisy benchmark, the model achieves source AUC 0.7990, target AUC 0.6466, and pAUC 0.6426, exceeding reported baseline metrics. Power profiling on a 16-chip Loihi 2 VPX system shows real-time throughput with 0.0406$\unicode{x2013}$0.0426 mJ dynamic energy per sample, two orders of magnitude lower than both a CPU and GPU. These results support neuromorphic acoustic anomaly detection as a practical candidate for low-power, persistent machine monitoring.

Comment
5 pages, 2 figures, 2 tables

Closest papers

Nearest neighbours by meaning across the whole index.

On-Edge Acoustic Continual Anomaly Detection: A Cross-Platform Comparative Study

cs.SD cs.LG ·2026-11-11 ·Rami Zewail, Yehia Ehab, Karim Ali, Ahmed Mahrous, Mohamed Awad +1 more
published similarity 0.67
Abstract · Accepted to the 14th International Japan-Africa Conference on Electronics, Communications and Computations (JAC-ECC 2026). 6 pages, 4 figure…

Acoustic Anomaly Detection (AAD) serves as a non-contact approach for machine condition monitoring, yet much of the existing research is evaluated offline and rarely addresses embedded hardware constraints or microphone variations under operational drift. This paper presents a comparative evaluation of on-edge continual AAD across two embedded platforms the ESP32-S3 (with an external I2S digital microphone) and the Arduino Nicla Vision (with an onboard Pulse Density Modulation (PDM) microphone) using a shared detection model. The model utilizes a lightweight ShallowNet encoder and contrastive prototype learning to map spectrograms into a 32-dimensional embedding space. Both boards run an identical TensorFlow Lite for Microcontrollers (TFLM) encoder, performing on-device prototype learning updated via an exponential moving average. A cloud pipeline orchestrated through Firebase and MQTT enables remote data collection and retraining. Evaluated via a controlled speaker-replay protocol using standardized Detection and Classification of Acoustic Scenes and Events (DCASE) Challenge Task 2 machine sounds, the ESP32-S3 achieved 82.35% to 95.00% accuracy across five machine types, while the Nicla Vision achieved 79.41% to 95.00%. The two platforms demonstrated comparable performance, confirming that the lightweight prototypical architecture transfers reliably across distinct hardware and sensor tiers.

0.27

Few-Shot Adaptation for Anomalous Sound Detection at Low False-Positive Rate

cs.SD cs.LGeess.AS ·2026-10-14 ·Simone Lugani, Christof Pichler, Hannes Wegleiter, Christoph Feilmayr, Rodolfo Zunino +1 more
published similarity 0.61
Abstract

Reliable fault detection is crucial for industrial machinery in large-scale facilities, where unexpected failures can cause costly downtime and production interruptions. Although acoustic monitoring provides a scalable solution for machine condition monitoring, its deployment is often constrained by high false-positive rates. We propose a two-step approach to automatic anomalous sound detection: first, when only normal operating audio samples are available, a regularized unsupervised model is deployed; then, after the first machine fault, a few-shot adaptation strategy exploits the anomalous samples acquired during the fault to improve the system. This adaptation increases the area under the precision-recall curve (AUPR) from 23.0 to 64.0 and improves detection in the low false-positive-rate region, with the partial area under the receiver operating characteristic curve (pAUROC) increasing from 39.6 to 72.8. We also show that covariance regularization improves both prediction accuracy and training stability in the unsupervised model. These results provide a practical strategy for acoustic anomaly detection systems, enabling improved accuracy and reduced false alarms.

0.47

Bad: Taming the Bioacoustic Data Deluge with a Bat Activity Detector

cs.SD ·2026-09-29 ·Stefano Ciapponi, Santiago Martinez Balvanera, Andrea Cesaretti, Elisabetta Farella, Kate E. Jones
similarity 0.60
Abstract

Passive Acoustic Monitoring of bats generates massive ultrasonic datasets (>27 GB/night per node), straining edge storage and battery life. Legacy triggers fail against acoustic confusers, while deep models exceed microcontroller limits. We present a hardware-aware Bat Activity Detector (BAD) specifically designed to discriminate bat calls from hard biological and environmental confusers across variable sampling rates (192-384 kHz). Tailored for the Silicon Labs EFM32PG26 (MVP) in 8-bit integer precision, our model achieves 100 percent hardware offload across all 14 layers (17.2 KB Flash, 73.1 KB RAM). End-to-end preprocessing (74.00 ms for 76 frames) and inference (30.00 ms) of 100 ms clips at 192 kHz require 104.00 ms per clip. On spatially out-of-domain recordings under a realistic low-prevalence regime (r_pos = 0.05), BAD achieves an AUC-ROC of 0.9748 and suppresses 99.4% of non-target noise frames while retaining 65.3% of bat calls - delivering a >33x precision gain over classical Goertzel baselines.

0.25

Conjoint Audio-to-Spikes Encoding and Processing for Efficient Neuromorphic Speech Recognition

cs.NE cs.AIcs.LGeess.AS ·2026-08-31 ·Valentin M. Meunier, Amélie Gruel, Pierre Lewden, Adrien F. Vincent, Sylvain Saïghi
benchmark similarity 0.59
Abstract · Under review. 15 pages, 9 figures and 4 tables. This work is supported by a public grant overseen by the French ANR as part of the "Chaires …

Obtaining data from neuromorphic sensors and processing it with Spiking Neural Networks is a promising solution to lower the energy cost of artificial intelligence. The current rarity of natively neuromorphic datasets promotes the development of software tools to translate input sensory data into spikes. However, highly bio-mimetic simulators can be challenging to implement on digital hardware. In this work, we evaluate the neuromorphic encoding and subsequent classification of audio into spikes using a non-learnable, high-level, programmable encoder targeting hardware implementation on FPGA. We quantify the pipeline's efficiency with hardware-agnostic metrics based on the quantitative spiking activity. Our study focuses on the simultaneous optimisation of encoder and classifier: the first provides efficient and informative data so that the latter achieves a better performance with an overall lower energy cost at learning and inference. This work introduces the first end-to-end neuromorphic spike-encoding and evaluation of the TIMIT dataset. Our simple feedforward network reaches a classification accuracy of 99.77% on a spike-encoded Heidelberg Digits, overcoming the neuromorphic state of the art on this benchmark dataset.

0.21

What Do Deepfake Audio Detectors Hear? From Self-Supervised Models to Audio LLMs

cs.SD ·2026-10-13 ·Wanying Ge, Xin Wang, Junichi Yamagishi
publishedcode/data similarity 0.59
Abstract · Accepted to SLT 2026

Real-world audio recordings for deepfake detection rarely consist solely of speech; they often are mixtures of speech and background events that themselves may also be synthetic. When processing these mixtures, it remains unclear whether detectors attend to the speech or the background event, and where their spectral evidence lies. We study this on the CompSpoof V2 database, whose mixtures pair independently real-or-fake speech and event components. Our results show that all systems detect fake events more accurately than fake speech. However, this performance gap is largely driven by poor generalization to an unseen fake speech domain, rather than a true difference in difficulty. Furthermore, sub-band probing reveals that the front-end encoder dictates where a countermeasure focuses its frequency evidence. To enable reliable deployment in real-world scenarios, future countermeasures should address out-of-domain generalization failures and carefully select front-end encoders aligned with their target acoustic evidence. Our source code and checkpoints are released at https://github.com/nii-yamagishilab/AntiDeepfake-AudioLLM.

0.25

Window Size Matters: Benchmarking Voice Activity Detectors in Noise

cs.SD ·2026-10-10 ·Alok Kumar, Mohit Srivastava, Anupam Purwar, Kuldeep Kumar Nigam, Yash Anchaliya +2 more
benchmark similarity 0.58
Abstract · Offline frame-level benchmark of TEN VAD, Silero VAD and an RMS energy baseline on LibriVAD

Voice activity detection (VAD) sits in front of almost every streaming speech recognizer, yet the choice of detector is often made by feel rather than by measurement. We report a frame-level offline benchmark of three detectors on the test-clean split of LibriVAD-small: the neural TEN VAD, the neural Silero VAD and a simple RMS energy baseline. The evaluation covers 2,214 noisy utterances (about 7.1 hours) built from LibriSpeech, nine noise families and six SNR levels from -5 to 20 dB. At a 16 ms hop, TEN VAD reaches a ROC AUC of 0.917, an average precision of 0.968 and an F1 of 0.913. A sweep over 20, 30, 40 and 50 ms windows shows TEN to be almost insensitive to frame length (AUC 0.916 to 0.919), while RMS stays near 0.75 to 0.77. Silero matches TEN only near its native 32 ms input size and drops to 0.63 at 20 ms. We hypothesize that this is likely caused by our fixed-frame protocol rather than by the model itself. Zero padding, sub-chunk averaging and unreset model state are the likely factors, but we have not ablated them. In a per-condition breakdown of TEN, babble noise at low SNR stays close to chance. We also show that F1 at a fixed 0.5 threshold is a weak metric on this data, because a trivial all-speech detector already scores 0.854. All settings needed to reproduce the results are given in the paper.

0.19

PolyChirp: Multi-Species Birdsong Classification Using TinyML on Low-Power Acoustic Sensors

cs.LG cs.AI ·2026-08-24 ·Nathan Duboisset, Zhaolan Huang, Felix Bießmann, Roudy Dagher, Antoine Lavandier +1 more
published similarity 0.58
Abstract

Recent progress in the field of TinyML has demonstrated that low-power hardware based on microcontrollers can achieve bird species monitoring in real time based on acoustic sensor data for an entire breeding period on a single battery charge. However, the state of the art on low-power microcontrollers was so far limited to binary classification of a single species. In contrast, real fauna monitoring deployments often target multiple species simultaneously. To address this challenge we develop PolyChirp, an approach combining biological domain expertise, automated dataset curation, neural architecture optimization and novel hardware to achieve multiclass bird species detection in the wild. PolyChirp is based on newly designed tiny multiclass models that leverage recent microcontrollers and hardware acceleration with a neural processing unit (NPU). We evaluate the predictive performance of these models, and we measure their computational performance -- flash footprint, latency, energy consumption -- on common microcontroller hardware. Our results demonstrate that PolyChirp matches or exceeds the TinyChirp architectures retrained under our protocol on single-species detection, and further achieves robust classification of up to 10 species simultaneously (macro F2 up to 0.97), while still fitting the flash, latency and energy budget of a low-power microcontroller sensor. A data-driven front-end redesign additionally makes on-device mel feature extraction 7x to 11x cheaper.

0.38

Acoustic Anomaly Detection for Early Identification of Drill Jamming

cs.LG ·2026-11-05 ·Maria Beatriz Silva, Lucas Edson Silva de Araújo, Sergio F. Chevtchenko, Ermeson Andrade, Danilo Araujo +1 more
publishedbenchmarkdataset similarity 0.58
Abstract · Accepted for publication at IEEE INDIN 2026. 8 pages, 6 figures. (c) 2026 IEEE. Personal use of this material is permitted

In the context of Industry 4.0, predictive maintenance is essential to minimize unplanned downtime and ensure operational safety. In machining processes, drill jamming is a critical failure that compromises both workpiece quality and tool integrity. This work proposes an acoustic anomaly detection system using ultrasonic sensors to identify pre-failure patterns in Computer Numerical Control (CNC) machining. We release a public dataset of time- and frequency-domain acoustic features from 17 drills, and benchmark semi-supervised autoencoder-based normality modelling against supervised XGBoost classification using Leave-One-Drill-Out validation. The results demonstrate that the Autoencoder is highly effective for industrial safety, achieving a Recall of 1.00 and a consolidated F1-score of 0.81. Furthermore, the threshold-independent analysis shows that the Autoencoder better separates normal and pre-failure acoustic patterns, achieving a consolidated AUC of 0.8294, compared with 0.7559 for the supervised model under inter-tool covariate shift. In contrast, the supervised XGBoost achieved an average F1-score of 0.55 and failed to detect failures in some of the evaluated drills. The findings highlight that the ultrasonic spectrum provides a reliable window for identifying incipient mechanical instabilities, and the AE model offers a robust safety envelope by anticipating all jamming events across the tested drill bits.

0.34