CS Paper Radar

The Missing Touch: Spatially Distributed Tactile Feedback Brings Teleoperation Closer to Human Dexterity

Rohan Kota, Gregory Reardon, J. Edward Colgate

cs.RO ·submitted 2026-08-19 18:41 UTC · v1

Abstract

A fundamental challenge in robotic teleoperation is enabling an operator to control a remote robot as effortlessly and intuitively as their own hands. Despite the growing use of teleoperation to collect demonstration data for training autonomous robot policies, teleoperated robot performance still falls significantly short of human dexterity, even for basic tasks. Here, we present evidence that a key factor contributing to this performance gap is the absence of spatially distributed tactile feedback. Using a two-degree-of-freedom (DoF) bilateral force-feedback telemanipulator paired with a 32-DoF tactile fingertip display, we show that operator performance improves significantly when localized deformations on the remote manipulator are faithfully reproduced on the operator's fingertip. In a series of teleoperation tasks, reproducing distributed contact information not only accelerated task performance but also brought teleoperated movements closer to natural human behavior by minimizing corrective actions and task completion steps, thereby reducing the deviation between teleoperated and natural trajectories by 29$\unicode{x2013}$79%. Furthermore, we found that increasing the resolution of the tactile feedback$\unicode{x2014}$by refining how finely the measured displacements were quantized for reproduction$\unicode{x2014}$compressed the state-space distribution of teleoperated motions, which has been associated with improved training outcomes for autonomous robot policies. Together, these results suggest that spatially distributed tactile feedback is essential for closing the gap between human and teleoperated dexterity and training the next generation of autonomous robots.

Closest papers

Nearest neighbours by meaning across the whole index.

Evaluating Lightweight Contact Feedback in Dual-Operator Collaborative Humanoid Teleoperation

cs.RO cs.HC ·2026-10-16 ·Austin Graves, Chuizheng Kong, Yunho Cho, Yuanshao Yang, Advaith Nidumukkala +2 more
similarity 0.78
Abstract · 8 pages, 4 figures, 2 tables. Project website: https://xrt-teleop.github.io

Dual-operator humanoid teleoperation enables collaborative manipulation through two separate robots, but operators lack direct awareness of robot-object contact that is normally available during physical interaction. To address this, we present eXtended Reality Teleoperation (XRT), an extended reality teleoperation framework that returns a robot's fingertip contact through lightweight vibrotactile and/or auditory feedback, and a synchronized dual-humanoid testbed built on it for two operators. Sixteen dyads performed a collaborative crate lift-and-flip under vision only and the three feedback conditions in a counterbalanced within-subject design with verified feedback-channel delivery. Three results follow. First, operators rated our finger-localized vibrotactile display as more effective than our open-ear sonification: all 32 ranked it above the sonification, 18 ranked it most effective, and its cues were rated far easier to perceive and interpret than the auditory cues. Second, completion time, failures, workload, discomfort, and partner awareness showed no detected condition differences, with wide completion-time intervals and smaller meaningful effects unresolved. Third, performance changed substantially with practice, especially on the harder flip-over task: completion time improved across blocks, and attempt-to-attempt variation within a dyad (SD x1.51) was larger than the largest condition contrast (x1.16). Exploratory analyses detected no difference in immediate grip or motion responses between feedback conditions. For novice collaborative teleoperation, our fingertip vibrotactile cues were rated more effective and easier to interpret than our auditory cues, while their effect on task performance remains unresolved.

0.15

M3-Tele: A Unified Multimodal Teleoperational Framework for Compliant Whole-Body Mobile Manipulation

cs.RO ·2026-09-07 ·Hengxiang Chen, Shenwen Deng, Yujian Ma, Gan Ma, Qiang Li +1 more
similarity 0.77
Abstract · 15 pages,12 figures,a under-review journal

Executing contact-rich tasks efficiently requires the seamless integration of whole-body coordination and physical compliance regulation. However, existing teleoperation and data-collection frameworks often overlook the joint consideration of multimodal perception and coordinated whole-body operation. This limitation can reduce the efficiency and quality of demonstration collection, thereby affecting the effectiveness of downstream policy learning. In this work, we present \textbf{M3-Tele}: A Unified \underline{M}ultimodal \underline{Tele}operational Framework for Compliant Whole-Body \underline{M}obile \underline{M}anipulation, enabling stable physical interaction and capturing aligned visual, tactile, force, and proprioceptive observations during task execution. Extensive experiments demonstrate that the proposed framework significantly improves contact-rich teleoperation performance. The proposed controller reduces the force tracking error from 4.132~N to 0.346~N, the contact loss from 2.46 to 0.02 events per trial and the tactile deformation error by 65\%. User studies across four mobile manipulation tasks also verify the reliability and usability of the proposed system. Furthermore, Diffusion Policy experiments highlight the value of joint tactile and force sensing.

0.22

Remote Surfaces at Your Fingertips: Electrovibration-Based Tactile Feedback for Robot Teleoperation via Touchscreen Interfaces

cs.RO cs.HC ·2026-08-22 ·Alperen Kenan, Juan José García Cárdenas, Adriana Tapus, Paul Bremner, Manuel Giuliani
published similarity 0.76
Abstract · 8 pages, 10 figures, accepted for presentation at the 2026 IEEE Conference on Telepresence in Bristol, United Kingdom, November 9-13, 2026

Enabling operators to perceive and interact with remote environments naturally is a fundamental challenge in robotic teleoperation. This is especially critical in tasks involving physical interaction, where real-time haptic awareness improves operational safety and effectiveness. Existing kinesthetic haptic feedback methods suffer from instability during rigid surface contacts and remain sensitive to communication delays, while visual cue-based force feedback imposes additional cognitive load and limits sustained situational awareness. This work presents a teleoperation interface that conveys remote surface interactions to the operator through electrovibration-based tactile feedback, enabling naturally mapped force reflection while avoiding the stability issues associated with kinesthetic feedback and the latency limitations of mechanical actuators. A user study (N=21) evaluated interface usability, sense of presence, and operator workload under two force reflection conditions: visual feedback and electrovibration-based tactile feedback. Characterisation experiments further assessed path-following accuracy and response time across both conditions. Results show that tactile feedback significantly reduced response time by 15.35% (p=0.002, d=0.96) and increased the sense of presence by 31% (p<0.001, d=0.90) compared to visual feedback, while imposing comparable workload and usability across both conditions. These findings demonstrate that electrovibration-based tactile feedback is a viable and effective modality for robot teleoperation, improving operator responsiveness and sense of presence in contact-rich manipulation tasks, with direct applicability to safety-critical domains such as nuclear maintenance.

0.20

Bench2Dex: Benchmarking Visuo-Tactile Bimanual Dexterous Manipulation Across Dexterous Hands

cs.RO cs.AIcs.CV ·2026-09-14 ·Zhenjie Yang, Yideng Zhang, Dongjie Zhang, Chenyu Jiang, Xianshuai Liu +19 more
benchmarkcode/datahighly cited similarity 0.76
Abstract · Technical Report. Project Page: https://bench2dex.github.io/

Tactile sensing provides contact information that can be difficult to infer from vision alone, but tactile hardware for dexterous hands has not converged to a common design. Dexterous hands differ in finger structure, contact surfaces, and sensor layouts, while simulated tactile signals still differ from measurements produced by physical sensors. These factors make it difficult to study visuo-tactile manipulation across diverse dexterous hands within a consistent experimental setting. We present Bench2Dex, a simulation benchmark for visuo-tactile bimanual manipulation across 12 dexterous hands. We adapt existing robot models with a shared simulated tactile interface that converts local contact geometry into image-like tactile observations. The interface provides a consistent observation format across different hand morphologies without attempting to reproduce the output of a specific physical tactile sensor. Bench2Dex includes 26 bimanual manipulation tasks that involve tool use, articulated-object interaction, and multi-stage manipulation, together with about 1.3K human-teleoperated demonstrations. The benchmark provides synchronized visual, tactile, proprioceptive, action, and object-state observations, together with executable task metrics. For robustness, we group seven perturbation types into invariance axis, where the correct action does not change, and equivariance axis, where the correct action changes together with the perturbation. We evaluate ACT, Diffusion Policy, pi0.5, and GR00T N1.5 on Bench2Dex and report their performance and failure modes. Bench2Dex is meant as a platform for studying visuo-tactile learning across dexterous hands. It does not assume that simulated tactile observations can replace real tactile sensing; it offers a shared setting for algorithm development while tactile hardware and simulation models are still evolving.

0.55

DexFLEX: Contact-Aware Foundation Controller for Command-Guided Dexterity

cs.RO cs.AIcs.LG ·2026-10-09 ·Weikang Wan, Zeyu Lai, Jianyu Hou, Yuchen Zhou, Jiawei Fu +2 more
similarity 0.75
Abstract

Dexterous robot hands can receive useful motion intent from teleoperation or learned policies, but successful execution also depends on contact decisions that these commands rarely specify. We introduce DexFLEX, a contact-aware foundation controller that turns upstream fingertip-motion drafts into contact-consistent joint commands. Instead of treating a draft as a trajectory to copy, DexFLEX treats it as evidence about intent: from the current tactile-proprioceptive state, it proposes feasible short-horizon motion chunks, predicts their contact consequences, and selects the candidate that best follows the command while preserving future contact stability. At inference time, a simple Draft-Dream-Select procedure combines pure-prior proposals for recovery with draft-seeded proposals for responsiveness, then decodes the selected motion into executable joint-space targets. Across degraded-command simulation, real-world shared control, and visuomotor policy learning, the same trained controller improves robustness without retraining, increasing real-world teleoperation success from 29.2% to 78.3% and reaching 46.7% policy-learning success, 3.5 times direct joint-action prediction, and 1.56 times prior-only correction. Videos are available at dex-flex.github.io.

0.14

Now You Feel It, Now You See Me: Digital-Twin-based Teleoperation Interface for Dexterous Manipulation

cs.RO ·2026-10-04 ·Youngchan Shim, Kyutae Lee, JooYun Kim, Jaeseong Hwang, Harim Ji +1 more
similarity 0.75
Abstract · 8 pages, 5 figures, 4 tables

Teleoperation is becoming increasingly important for collecting high-quality demonstrations to teach robots dexterous manipulation skills. For dexterous manipulation, bare-hand tracking provides a practical way to control robotic hands and demonstrate coordinated finger movements without gloves or exoskeletons. However, this type of teleoperation faces two key feedback limitations: a lack of force feedback and visual feedback of occluded region. The absence of force feedback hinders precise and safe manipulation, as operators must infer contact force visually rather than feel them directly. Occlusion by objects or other robot parts impairs the assessment of hand positions, approach distances, and pre-grasp configurations suited to the object's shape. To address these limitations, we propose a digital-twin-based augmented reality (AR) teleoperation interface that integrates bare-hand tracking, bimanual robotic hands, and virtual representations of the robot and task objects. The interface renders tactile measurements on robot hand meshes as visuo-force feedback. Furthermore, it offers a user-controlled virtual view panel or occlusion-aware transparency rendering to provide occlusion-mitigating visual feedback. We evaluated the interface through user studies involving Task 1 and Task 2, examining how force visualization and visual assistance support demonstration collection in tasks requiring careful force regulation and manipulation under occlusion.

0.12

Unified Visual-Tactile-Action Modeling from Human Demonstrations for Dexterous Manipulation

cs.RO cs.AI ·2026-09-28 ·Wenqiao Li, Qianyou Zhao, Jiawen Hao, Xuezhou Zhu, Tengyu Liu +3 more
datasetcode/data similarity 0.75
Abstract

Dexterous manipulation requires tactile feedback. However, robot tactile demonstrations are difficult to scale,because dexterous-hand teleoperation provides limited tactile feedback to the operator. In contrast, human demonstrations offer a substantially more scalable source of diverse tactile interactions. Motivated by a simple premise: hands can change, but the underlying physics of interaction does not. We leverage human tactile data to improve dexterous manipulation policies. Specifically, we first build a tactile motion-capture system that synchronously records images, tactile signals, and hand motions. Using this system, we construct the UVTA dataset spanning five contact-rich tasks, with 1,000 human demonstrations covering diverse interaction patterns and 150 robot demonstrations per task. To transfer the underlying physics of human interaction to robot control, we propose a Unified Visual-Tactile-Action Model that maps both embodiments into aligned tactile and action representations and jointly predicts future action and tactile trajectories. The joint objective enables human demonstrations to supervise contact-aware representation learning, while only robot actions are executed during deployment. In real-robot evaluations across five tasks, our method achieves an average success rate of 70%, outperforming the strongest visual-tactile baseline, which achieves 29%, and an architecture ablation, which achieves 42%. Performance improves consistently with additional human demonstrations and exhibits no saturation at 1,000 demonstrations per task, validating the effectiveness of scalable human tactile data for dexterous manipulation. Project page is available at https://uni-vta.github.io/.

0.46

DITTO-X: Forward and Reverse Teleoperation for Dexterous Manipulation and Human Intervention

cs.RO ·2026-09-30 ·Zhanpeng He, Joaquin Palacios, Zhangyu Wang, Chenhao Li, Katelyn Lee +3 more
similarity 0.74
Abstract

Teleoperated demonstrations are a primary source of data for robot manipulation, and teleoperated interventions are a primary mechanism for correcting policies at deployment. Yet most teleoperation systems close the loop through vision alone and are built around parallel-jaw grippers, limiting both what the robot can execute and what the operator can express through it. This is most damaging in shared autonomy, where the operator sees the scene only through occluded cameras and must take over a dexterous hand mid-task, often with an object already grasped. We present DITTO-X, a hand-agnostic dexterous teleoperation interface that renders joint-level force and fingertip contact events from sensing already on the robot hand, and drives three commercial dexterous hands (Sharpa, Wuji, and Inspire) without per-hand redesign. Because the exoskeleton is actuated, DITTO-X also supports reverse teleoperation, in which the robot back-drives the operator's fingers into its own configuration before control is transferred, so the human enters the loop already matched to the state they inherit. Our results show that DITTO-X improves demonstration quality and throughput over a commercial hand-tracking glove, both in regular data collection and in human intervention during policy deployment for contact-rich manipulation tasks. More information can be found from our website: https://tml.stanford.edu/ditto-x/.

0.41