CS Paper Radar

DexFLEX: Contact-Aware Foundation Controller for Command-Guided Dexterity

Weikang Wan, Zeyu Lai, Jianyu Hou, Yuchen Zhou, Jiawei Fu, Henrik I Christensen, Hao Su

cs.RO cs.AIcs.LG ·submitted 2026-10-09 22:47 UTC · v1

Abstract

Dexterous robot hands can receive useful motion intent from teleoperation or learned policies, but successful execution also depends on contact decisions that these commands rarely specify. We introduce DexFLEX, a contact-aware foundation controller that turns upstream fingertip-motion drafts into contact-consistent joint commands. Instead of treating a draft as a trajectory to copy, DexFLEX treats it as evidence about intent: from the current tactile-proprioceptive state, it proposes feasible short-horizon motion chunks, predicts their contact consequences, and selects the candidate that best follows the command while preserving future contact stability. At inference time, a simple Draft-Dream-Select procedure combines pure-prior proposals for recovery with draft-seeded proposals for responsiveness, then decodes the selected motion into executable joint-space targets. Across degraded-command simulation, real-world shared control, and visuomotor policy learning, the same trained controller improves robustness without retraining, increasing real-world teleoperation success from 29.2% to 78.3% and reaching 46.7% policy-learning success, 3.5 times direct joint-action prediction, and 1.56 times prior-only correction. Videos are available at dex-flex.github.io.

Closest papers

Nearest neighbours by meaning across the whole index.

DexTaG: Tactile-as-Guidance in Reinforcement Learning for Dexterous Manipulation

cs.RO ·2026-09-27 ·Han Yang, Yian Wang, Yunlong Song, Zhenjia Xu, Chuang Gan
similarity 0.80
Abstract

Glove-based motion capture is emerging as a scalable approach to collecting dexterous-hand demonstration data. However, due to the kinematic gap between the human and robot hand, the recorded human motions cannot be executed directly on the robot, especially for contact-rich tool-use tasks involving in-hand reorientation. Prior work bridges this gap in simulation through reinforcement learning (RL) or trajectory optimization, but the human contact pattern is hard to preserve under such formulations, often producing unnatural manipulation and unstable functional grasps. These methods also train a separate policy or solve a separate optimization for each reference trajectory, which is inefficient. To solve these problems, we propose DexTaG, a tactile-guided RL framework for dexterous manipulation. During training, tactile signals captured by the glove guide policy search toward the measured human contact pattern, reducing reliance on precise reference geometry for contact supervision. To improve efficiency, we train a single generalizable retargeter jointly on all training trajectories of the same object. The retargeter is further distilled into a tactile-free student controller conditioned on the target object trajectory for real-world deployment. On marker-pen and hammer manipulation tasks, DexTaG learns natural, contact-rich behaviors that baselines with distance-based contact heuristics fail to learn, generalizes to held-out trajectories of the same object and task, and outperforms single-trajectory baselines on OakInk2.

0.19

Dex-X: Learning Visual-Tactile Dexterous Manipulation From Human Videos with Simulated Interaction

cs.RO ·2026-09-07 ·Ruoqu Chen, Feixiang Ruan, Liu Cao, Zihao Wang, Botian Xu +7 more
highly cited similarity 0.80
Abstract · Project website: https://dexx-code.github.io/dexx-code/

Human videos are an abundant source of dexterous manipulation behaviors, but they lack tactile information that is crucial for contact-rich interaction. This raises a fundamental question: can robots learn deployable visual-tactile dexterous manipulation policies from human video demonstrations without robot-side data collection? We present DEX-X, a framework for learning visual-tactile dexterous manipulation from human videos through simulation. Our key insight is that simulation can serve as a tactile completion engine. Given monocular human demonstrations, DEX-X reconstructs hand-object interactions in simulation, where physically grounded contact dynamics provide tactile supervision unavailable in the original videos. Leveraging this recovered tactile information, we train visual-tactile dexterous manipulation policies and distill them into deployable policies operating on point-cloud observations and tactile sensing. We demonstrate zero-shot sim-to-real transfer on a dexterous hand-arm platform across diverse grasping and contact-rich tool-use tasks. The teacher policy achieves 65.9% average success across six task categories in simulation, while the distilled visual-tactile policy achieves 93% success on real-world cube picking and 53% on the challenging table-cleaning task. Zero-shot generalization to unseen object geometries is also observed on object-picking tasks. Our results suggest that simulated interaction is a key bridge between human videos and deployable dexterous manipulation policies, providing the missing physical supervision needed for scalable robot skill learning from Internet-scale human video data.

0.50

DexPort: A Hand-Held Skill Interface for Dexterous Hand Data Collection

cs.RO cs.AIcs.LG ·2026-10-23 ·Amber Xie, Jiawei Fu, Xiaofeng Guo, Carmelo Sferrazza, Guanya Shi +1 more
similarity 0.79
Abstract · Website: https://amberxie88.github.io/dexport/

Collecting high-quality demonstrations remains a central bottleneck for learning dexterous manipulation. Teleoperation records executable robot actions, but it requires a complete robot setup and places the burden of coordinating many finger joints on the operator. Human demonstrations are easier to collect, but their motions must be estimated and retargeted to the robot, and they do not directly provide robot actions. In this paper, we introduce DexPort, a portable data-collection interface for high-DoF robot hands. It uses the same hand hardware for collection and deployment, avoiding a hand embodiment gap, and records both commanded joint targets and measured joint states. Our key observation is that a small set of skills can support a wide range of dexterous tasks. During collection, the operator moves the hand-held interface to specify the robot wrist motion and selects or adjusts skills that coordinate the finger motion. This removes the need to control each joint independently while retaining behaviors such as precise grasping and in-hand manipulation. We collect demonstrations across several real-world tasks and in unstructured environments without a robot arm. We then use behavior cloning to train visuomotor policies directly on the recorded wrist motions and hand commands, without skill labels. We evaluate across 4 tasks: pick-and-place with diverse objects, screwing with in-hand tool use, drawer stowage which requires simultaneous grasp and pulling, and a bimanual scanning task. We collect over 2,500 demonstrations with our portable device, in both laboratory and in-the-wild settings. Across our tasks, we see an improvement from 11% to 64% when using recorded robot commands instead of states, and an improvement from 36% to 78% for task success when using in-the-wild data.

0.40

UniDex-ViTac: Learning Unified Visuo-Tactile Dexterous Manipulation Policy from Human Video Data

cs.RO ·2026-09-15 ·Hyesung Lee, Si-Hwan Heo, Sungwook Yang
code/data similarity 0.79
Abstract · 8 pages, 7 figures, 2 tables. Project page: https://unidex-vitac.github.io/

Human videos provide demonstrations of dexterous manipulation but lack robot-executable actions and tactile measurements. We present UniDex-ViTac, a framework that uses human-video-guided simulation to generate robot demonstrations paired with fingertip contact observations for training a deployable visuo-tactile policy. Object-specific residual reinforcement learning specialists adapt annotated human-object interaction references to a robotic arm-hand system. Their successful rollouts pair final robot action targets with robot-side fingertip contact observations. From 50 human demonstrations across ten objects, we collect 10,000 simulated trajectories to train a single Action Chunking with Transformers (ACT) based generalist. The policy combines point clouds, proprioception, and four binary contact signals encoded through fingertip labels and a separate token, without requiring human references or privileged object identity and pose at deployment. The contact-augmented configuration achieves 68.3% macro-average success in simulation, compared with 55.5% for the point-cloud-only baseline. Without real-robot demonstrations or policy fine-tuning, it succeeds in 73/110 physical trials (66.4%) across six seen and five unseen objects, compared with 60/110 (54.5%) for the baseline, an increase of 11.8 percentage points. These results support the feasibility of learning a unified visuo-tactile dexterous manipulation policy from video-guided simulated interactions. Project page: https://unidex-vitac.github.io/

0.33

DexSuite: An All-in-One Framework for Dexterous Manipulation Across Arms, Hands, and Tasks

cs.RO ·2026-10-27 ·Anas Houssaini, Hugo He, Junming Shi, Amin Abyaneh, Ricardo Chahine +17 more
benchmarkcode/data similarity 0.78
Abstract · 7 pages, 7 figures, 2 tables. Project page: https://dexsuiteorg.github.io

Human-level dexterity remains a central open problem in robotics, yet few simulation frameworks cover the full workflow of dexterous manipulation, from setting up a robot to collecting dexterous demonstrations and evaluating policies. We present DexSuite, an all-in-one simulation framework for dexterous manipulation built on the Genesis simulator. DexSuite provides 30 tasks and assembles its 10 arms and 12 end-effectors, from parallel-jaw grippers to dexterous hands, into more than 100 single-arm robots and thousands of bimanual pairs. It also ships a standardized environment API, integrated teleoperation, and simulated tactile sensing. Moreover, we define a benchmark of 16 task-embodiment pairs spanning diverse contact complexities and horizons, and release a dataset of 4,700 successful episodes in simulation from human teleoperation, scripted experts, and learned policies. We release DexSuite as open source and hope others will build on it. Videos and datasets are available at https://dexsuiteorg.github.io

0.27

ReDex: Repairing Sim-to-Real Dexterous Policies by Finger-Level Compliant Interaction

cs.RO ·2026-10-05 ·Jinzhou Li, Hadi Tabatabaee, Kelin Yu, Yuyin Sun, Cheng-Hao Kuo +4 more
similarity 0.78
Abstract

Dexterous manipulation policies trained in simulation often fail to transfer to the real world because of errors in contact timing and force regulation. Yet these policies can retain useful multi-finger coordination for task progression. We propose ReDex, a framework for adapting a simulation-trained base policy to the real world by correcting local contact failures and incorporating tactile feedback. Starting from a proprioception-only base policy, ReDex allows a human operator to physically correct contact failures at selected fingers under compliant control during real-world rollouts, while the frozen base policy continues to control the remaining fingers. These rollouts combine base policy execution, human-corrected finger motion, and fingertip force observations. We reconstruct force-informed targets from these rollouts to train a standalone force-conditioned policy via behavior cloning. This design reduces human correction effort, enables learning of contact regulation from real-world interaction, and introduces force feedback into a proprioception-only policy without tactile simulation or complex full-hand teleoperation. We evaluate ReDex on two challenging, contact-rich dexterous manipulation tasks on real hardware. Compared with sim-to-real transferred base policies, ReDex increases Object Flipping success rate from 14\% to 86\% across two objects and average Screwdriver Rotation progress from 26.0% to 95.3% across three objects.

0.13

Touch Where It Matters: Learning Local Tactile Policies for Fine-Grained Gripper Control

cs.RO ·2026-10-17 ·Mingyuan Ba, Yanan Zhou, James Zhao, Weiming Zhi
similarity 0.78
Abstract · 9 pages, 11 figures, 3 tables

Visual imitation policies can organise task motion, yet contact-rich object use demands gripper adjustments beyond coarse opening and closing. We study fine-grained gripper control as a local feedback problem within ongoing task execution. Our approach assigns tactile feedback a dedicated control role during contact-rich task stages. We introduce ContactPolicy, a learned local controller that takes over the gripper while a visual base policy continues to control the arm. ContactPolicy combines tactile and force histories with current robot state to jointly predict gripper increments and their modulation, updating the gripper target from each new observation. An Intent policy manages control handover between the visual base policy and ContactPolicy. Real-world experiments on container opening, object handling, and tool operation show improved task success over both the Visuomotor Policy and Tactile-Force Policy baselines. Execution analysis illustrates how the gripper adjusts contact within an ongoing task, including periods of target retention and fine-grained changes as interaction conditions evolve. Arm-state ablations and failure analysis further examine how execution context supports local regulation. These results support task-local tactile policies for fine-grained gripper control within visual manipulation.

0.16

ForeTac: Predictive Contact Guidance for Generative Robot Policies

cs.RO ·2026-10-13 ·Zhiyuan Chen, Shuai Chen, Haoran Zhou, Yizhe Zhao, Kaiyuan Yang +5 more
code/data similarity 0.77
Abstract

In contact-rich manipulation, actions that appear equally plausible from vision can produce different contact outcomes, while reactive control based on current tactile feedback may respond too late to prevent failure. We present ForeTac, a predictive contact-guidance framework organized as a represent-predict-evaluate-guide loop. ForeTac encodes the current tactile state, predicts future tactile latent trajectories conditioned on candidate action sequences, and evaluates each predicted trajectory with a contact-quality objective learned from successful and failed physical interactions. At inference, gradients of this objective are backpropagated through the tactile predictor to guide action generation before execution while keeping all model parameters frozen. We evaluate ForeTac on four real-robot tasks (planar and curved-surface wiping, card swiping, and fragile-object grasping) with diffusion and flow-matching policies. Compared with vision-only Diffusion Policy, ForeTac improves the average task success rate (SR) from 36.3% to 71.3% and the average contact success rate (CSR) from 20.0% to 66.3% across these tasks, and yields gains in both metrics with a flow-matching policy. Component analyses support the learned tactile representation, action-conditioned foresight, and generation-time gradient guidance, while predicted tactile latent trajectories preserve contact-quality ordering. Project page: https://foretac.github.io/.

0.22