CS Paper Radar

DexPort: A Hand-Held Skill Interface for Dexterous Hand Data Collection

Amber Xie, Jiawei Fu, Xiaofeng Guo, Carmelo Sferrazza, Guanya Shi, Haozhi Qi

cs.RO cs.AIcs.LG ·submitted 2026-10-23 17:56 UTC · v1

Abstract

Collecting high-quality demonstrations remains a central bottleneck for learning dexterous manipulation. Teleoperation records executable robot actions, but it requires a complete robot setup and places the burden of coordinating many finger joints on the operator. Human demonstrations are easier to collect, but their motions must be estimated and retargeted to the robot, and they do not directly provide robot actions. In this paper, we introduce DexPort, a portable data-collection interface for high-DoF robot hands. It uses the same hand hardware for collection and deployment, avoiding a hand embodiment gap, and records both commanded joint targets and measured joint states. Our key observation is that a small set of skills can support a wide range of dexterous tasks. During collection, the operator moves the hand-held interface to specify the robot wrist motion and selects or adjusts skills that coordinate the finger motion. This removes the need to control each joint independently while retaining behaviors such as precise grasping and in-hand manipulation. We collect demonstrations across several real-world tasks and in unstructured environments without a robot arm. We then use behavior cloning to train visuomotor policies directly on the recorded wrist motions and hand commands, without skill labels. We evaluate across 4 tasks: pick-and-place with diverse objects, screwing with in-hand tool use, drawer stowage which requires simultaneous grasp and pulling, and a bimanual scanning task. We collect over 2,500 demonstrations with our portable device, in both laboratory and in-the-wild settings. Across our tasks, we see an improvement from 11% to 64% when using recorded robot commands instead of states, and an improvement from 36% to 78% for task success when using in-the-wild data.

Comment
Website: https://amberxie88.github.io/dexport/

Closest papers

Nearest neighbours by meaning across the whole index.

DEX-PHD: A Dexterous Portable Handheld Device for Multimodal Data Collection

cs.RO ·2026-10-26 ·Jooyoung Hong, Noboru Myers, Obin Kwon, Yixian Yang, Joohyung Kim
similarity 0.87
Abstract

Existing manipulation data collection methods typically offer either accurate robot-state acquisition through kinematic-chain-based teleoperation or convenient, portable operation through vision-based approaches. We present DEX-PHD, a portable handheld device that combines these advantages for dexterous manipulation by integrating a dexterous robot hand, continuous per-finger control, and multimodal logging. The system records proprioceptive information, fingertip contact data, and wrist-camera video, while the operator directly controls the robot hand through joint-level mapping. Its untethered design enables data collection across diverse environments. We demonstrate DEX-PHD on contact-rich tasks requiring coordinated multi-finger manipulation and deploy the collected demonstrations through open-loop replay on a physical humanoid robot. The results show that open-loop replay preserves the main temporal patterns of finger motion and task-relevant contact. Therefore, DEX-PHD provides a practical platform for portable, multimodal dexterous manipulation data collection.

0.39

DexSeed: Expanding Human Hand-Object Interactions into Robot Demonstrations for Dexterous Policy Learning

cs.RO ·2026-11-10 ·Huaijin Pi, Zehong Shen, Yong Wang, Kechun Xu, Changpeng Wang +6 more
code/data similarity 0.84
Abstract · Project page: https://robbyant-research.github.io/DexSeed/

We study how to generate diverse, physically executable robot demonstrations for dexterous vision-language-action (VLA) learning. Existing demonstration-generation methods typically rely on costly teleoperated examples. Meanwhile, human hand--object datasets provide a reusable source, but existing transfer methods mainly reproduce given interactions. Turning these interactions into VLA training data further requires coverage of different objects and manipulation locations, together with executable arm and finger actions, and visual observations. To achieve this, we present DexSeed, a framework for low-cost generation of dexterous robot data from human hand--object interactions. Our key idea is to expand human sequences while preserving their grasps and realizing the resulting motions under arm-tracking dynamics in physics simulation. Specifically, we organize source sequences by grasp mode with shared language descriptions. InteractionMesh-based retargeting and arm trajectory augmentation adapt these sequences to the robot hand, different object geometries, and pick-and-place locations while preserving local hand--object relationships. An RL finger-control policy produces executable rollouts, while the arm tracks precomputed trajectories. Rendered observations and recorded actions from successful rollouts are paired with grasp descriptions to fine-tune a VLA. Experiments show improved contact fidelity in retargeting and more reliable whole-arm execution than the evaluated baselines. Simulation evaluation and real-world deployment further demonstrate that a VLA fine-tuned solely on the generated demonstrations can execute language-specified grasps. Project page: https://robbyant-research.github.io/DexSeed/.

0.20

Dex-X: Learning Visual-Tactile Dexterous Manipulation From Human Videos with Simulated Interaction

cs.RO ·2026-09-07 ·Ruoqu Chen, Feixiang Ruan, Liu Cao, Zihao Wang, Botian Xu +7 more
highly cited similarity 0.84
Abstract · Project website: https://dexx-code.github.io/dexx-code/

Human videos are an abundant source of dexterous manipulation behaviors, but they lack tactile information that is crucial for contact-rich interaction. This raises a fundamental question: can robots learn deployable visual-tactile dexterous manipulation policies from human video demonstrations without robot-side data collection? We present DEX-X, a framework for learning visual-tactile dexterous manipulation from human videos through simulation. Our key insight is that simulation can serve as a tactile completion engine. Given monocular human demonstrations, DEX-X reconstructs hand-object interactions in simulation, where physically grounded contact dynamics provide tactile supervision unavailable in the original videos. Leveraging this recovered tactile information, we train visual-tactile dexterous manipulation policies and distill them into deployable policies operating on point-cloud observations and tactile sensing. We demonstrate zero-shot sim-to-real transfer on a dexterous hand-arm platform across diverse grasping and contact-rich tool-use tasks. The teacher policy achieves 65.9% average success across six task categories in simulation, while the distilled visual-tactile policy achieves 93% success on real-world cube picking and 53% on the challenging table-cleaning task. Zero-shot generalization to unseen object geometries is also observed on object-picking tasks. Our results suggest that simulated interaction is a key bridge between human videos and deployable dexterous manipulation policies, providing the missing physical supervision needed for scalable robot skill learning from Internet-scale human video data.

0.50

DexJoCo-X: Benchmarking Action Representations for Multi-Hand Dexterous Manipulation

cs.RO ·2026-10-02 ·Xiangwei Jiang, Yao Mu, Lixin Duan, Wen Li
benchmark similarity 0.83
Abstract · 8 pages, 5 figures. Updated photography illustrations in Fig. 2; text and results unchanged. Project website: https://jxw-wei.github.io/DexJ…

As dexterous hands proliferate, collecting data and training policies separately for every morphology becomes increasingly impractical. Scalable cross-embodiment learning therefore requires a unified representation that captures shared manipulation structure while preserving morphology-specific control. Differences in hands, tasks, datasets, and control interfaces prevent existing studies from isolating the effects of representation, pretraining, and architecture. We introduce DexJoCo-X, a benchmark and toolkit for controlled comparison across seven representative dexterous hands, six single-arm and bimanual tasks, and 2,100 balanced demonstrations. DexJoCo-X provides a matched multi-hand, multi-task protocol with common scenes, success criteria, and execution interfaces, redesigned glove-to-hand mappings, and an automated pipeline that expands reviewed demonstrations across randomized scenes. Using $π_{0.5}$, Ego-Pi, and Being-H0.5, we examine whether a shared action interface is sufficient for multi-hand learning. Expanding $π_{0.5}$ to an 80-dimensional bimanual output yields near-zero success. Ego-Pi preserves the pretrained action head through interleaved prediction and supports per-hand multi-task learning, but remains ineffective for seven-hand joint training. By contrast, Being-H0.5 combines cross-embodiment pretraining, a unified action space, and embodiment-aware experts, enabling one policy to control all seven hands. Within this architecture, function-aligned action slots achieve 47.7% mean success, compared with 47.0% for native coordinates and 33.1% for DexLatent. These results show that cross-embodiment representation depends on the entire learning system: action coordinates, pretraining, and architecture must jointly separate shared manipulation structure from embodiment-specific control.

0.28

DexHOT: Learning Hand-Object Configuration Transfer for Dexterous Manipulation

cs.RO ·2026-11-03 ·Zhewei Gui, Anthony Bolton, Jiyao Zhang, Zeyuan Chen, Qiyang Yan +2 more
similarity 0.81
Abstract · 9 pages, 4 figures

Dexterous manipulation involves not only moving objects, but also arranging the hand around them to maintain useful contacts and enable subsequent actions. Yet many learning-based systems specify goals primarily through object poses or trajectories, leaving hand-object configurations to emerge implicitly. We introduce DexHOT, which formulates dexterous manipulation as hand-object configuration transfer: moving between feasible configurations that jointly specify hand articulation and object pose relative to the wrist. DexHOT learns a reusable relation-conditioned transfer primitive from synthetic feasible configuration pairs, without human reference motions, and composes long-horizon behaviors through closed-loop tracking of configuration subgoals. On DexHOTBench with 120 objects, a single policy achieves 80.5% transfer success on seen objects and 69.4% on unseen objects; on a real dexterous hand, it achieves 61.5% success over 200 real-robot transfers and 90% task success across six demonstration-guided tasks. These results show that explicit hand-object goals provide an expressive and composable interface for dexterous manipulation. More details and videos are available at https://dex-hot.github.io/.

0.27

FOMI: A Force-Feedback Manipulation Interface for Teaching Contact-Rich Manipulation

cs.RO ·2026-10-14 ·Yishu Shen, Yiming Luo, Ruilin Wang, Bowen Yang, Shuai Yang +5 more
similarity 0.80
Abstract

Robot-free collection with handheld interfaces enables scalable acquisition of human demonstrations for policy learning. However, existing handheld interfaces often provide limited intuitive force feedback, making contact-rich demonstration collection challenging for human operators. To address this, we present FOMI, a force-feedback manipulation interface with a scissor-shaped mechanism, which transmits object interaction forces directly to the operator's hands through actuation links without force sensors. This intuitive force feedback supports real-time action adjustment during robot-free collection of contact-rich demonstrations. Around FOMI, we build a demonstration collection system that integrates sensor calibration, data acquisition, and synchronization for robot-free collection. By further mapping pose changes and gripper opening of FOMI to robot end-effector poses and gripper commands, the system also supports teleoperation. Across four contact-rich tasks, FOMI improves collection efficiency by approximately 29% and 18% over the best baselines in robot-free collection and teleoperation, respectively. Demonstrations collected with FOMI in both modes enable policies to perform challenging contact-rich manipulation tasks with high success rates.

0.13

DexSuite: An All-in-One Framework for Dexterous Manipulation Across Arms, Hands, and Tasks

cs.RO ·2026-10-27 ·Anas Houssaini, Hugo He, Junming Shi, Amin Abyaneh, Ricardo Chahine +17 more
benchmarkcode/data similarity 0.80
Abstract · 7 pages, 7 figures, 2 tables. Project page: https://dexsuiteorg.github.io

Human-level dexterity remains a central open problem in robotics, yet few simulation frameworks cover the full workflow of dexterous manipulation, from setting up a robot to collecting dexterous demonstrations and evaluating policies. We present DexSuite, an all-in-one simulation framework for dexterous manipulation built on the Genesis simulator. DexSuite provides 30 tasks and assembles its 10 arms and 12 end-effectors, from parallel-jaw grippers to dexterous hands, into more than 100 single-arm robots and thousands of bimanual pairs. It also ships a standardized environment API, integrated teleoperation, and simulated tactile sensing. Moreover, we define a benchmark of 16 task-embodiment pairs spanning diverse contact complexities and horizons, and release a dataset of 4,700 successful episodes in simulation from human teleoperation, scripted experts, and learned policies. We release DexSuite as open source and hope others will build on it. Videos and datasets are available at https://dexsuiteorg.github.io

0.27

DexTaG: Tactile-as-Guidance in Reinforcement Learning for Dexterous Manipulation

cs.RO ·2026-09-27 ·Han Yang, Yian Wang, Yunlong Song, Zhenjia Xu, Chuang Gan
similarity 0.80
Abstract

Glove-based motion capture is emerging as a scalable approach to collecting dexterous-hand demonstration data. However, due to the kinematic gap between the human and robot hand, the recorded human motions cannot be executed directly on the robot, especially for contact-rich tool-use tasks involving in-hand reorientation. Prior work bridges this gap in simulation through reinforcement learning (RL) or trajectory optimization, but the human contact pattern is hard to preserve under such formulations, often producing unnatural manipulation and unstable functional grasps. These methods also train a separate policy or solve a separate optimization for each reference trajectory, which is inefficient. To solve these problems, we propose DexTaG, a tactile-guided RL framework for dexterous manipulation. During training, tactile signals captured by the glove guide policy search toward the measured human contact pattern, reducing reliance on precise reference geometry for contact supervision. To improve efficiency, we train a single generalizable retargeter jointly on all training trajectories of the same object. The retargeter is further distilled into a tactile-free student controller conditioned on the target object trajectory for real-world deployment. On marker-pen and hammer manipulation tasks, DexTaG learns natural, contact-rich behaviors that baselines with distance-based contact heuristics fail to learn, generalizes to held-out trajectories of the same object and task, and outperforms single-trajectory baselines on OakInk2.

0.19