CS Paper Radar

DEX-PHD: A Dexterous Portable Handheld Device for Multimodal Data Collection

Jooyoung Hong, Noboru Myers, Obin Kwon, Yixian Yang, Joohyung Kim

cs.RO ·submitted 2026-10-26 13:57 UTC · v1

Abstract

Existing manipulation data collection methods typically offer either accurate robot-state acquisition through kinematic-chain-based teleoperation or convenient, portable operation through vision-based approaches. We present DEX-PHD, a portable handheld device that combines these advantages for dexterous manipulation by integrating a dexterous robot hand, continuous per-finger control, and multimodal logging. The system records proprioceptive information, fingertip contact data, and wrist-camera video, while the operator directly controls the robot hand through joint-level mapping. Its untethered design enables data collection across diverse environments. We demonstrate DEX-PHD on contact-rich tasks requiring coordinated multi-finger manipulation and deploy the collected demonstrations through open-loop replay on a physical humanoid robot. The results show that open-loop replay preserves the main temporal patterns of finger motion and task-relevant contact. Therefore, DEX-PHD provides a practical platform for portable, multimodal dexterous manipulation data collection.

Closest papers

Nearest neighbours by meaning across the whole index.

DexPort: A Hand-Held Skill Interface for Dexterous Hand Data Collection

cs.RO cs.AIcs.LG ·2026-10-23 ·Amber Xie, Jiawei Fu, Xiaofeng Guo, Carmelo Sferrazza, Guanya Shi +1 more
similarity 0.87
Abstract · Website: https://amberxie88.github.io/dexport/

Collecting high-quality demonstrations remains a central bottleneck for learning dexterous manipulation. Teleoperation records executable robot actions, but it requires a complete robot setup and places the burden of coordinating many finger joints on the operator. Human demonstrations are easier to collect, but their motions must be estimated and retargeted to the robot, and they do not directly provide robot actions. In this paper, we introduce DexPort, a portable data-collection interface for high-DoF robot hands. It uses the same hand hardware for collection and deployment, avoiding a hand embodiment gap, and records both commanded joint targets and measured joint states. Our key observation is that a small set of skills can support a wide range of dexterous tasks. During collection, the operator moves the hand-held interface to specify the robot wrist motion and selects or adjusts skills that coordinate the finger motion. This removes the need to control each joint independently while retaining behaviors such as precise grasping and in-hand manipulation. We collect demonstrations across several real-world tasks and in unstructured environments without a robot arm. We then use behavior cloning to train visuomotor policies directly on the recorded wrist motions and hand commands, without skill labels. We evaluate across 4 tasks: pick-and-place with diverse objects, screwing with in-hand tool use, drawer stowage which requires simultaneous grasp and pulling, and a bimanual scanning task. We collect over 2,500 demonstrations with our portable device, in both laboratory and in-the-wild settings. Across our tasks, we see an improvement from 11% to 64% when using recorded robot commands instead of states, and an improvement from 36% to 78% for task success when using in-the-wild data.

0.40

Dex-X: Learning Visual-Tactile Dexterous Manipulation From Human Videos with Simulated Interaction

cs.RO ·2026-09-07 ·Ruoqu Chen, Feixiang Ruan, Liu Cao, Zihao Wang, Botian Xu +7 more
highly cited similarity 0.79
Abstract · Project website: https://dexx-code.github.io/dexx-code/

Human videos are an abundant source of dexterous manipulation behaviors, but they lack tactile information that is crucial for contact-rich interaction. This raises a fundamental question: can robots learn deployable visual-tactile dexterous manipulation policies from human video demonstrations without robot-side data collection? We present DEX-X, a framework for learning visual-tactile dexterous manipulation from human videos through simulation. Our key insight is that simulation can serve as a tactile completion engine. Given monocular human demonstrations, DEX-X reconstructs hand-object interactions in simulation, where physically grounded contact dynamics provide tactile supervision unavailable in the original videos. Leveraging this recovered tactile information, we train visual-tactile dexterous manipulation policies and distill them into deployable policies operating on point-cloud observations and tactile sensing. We demonstrate zero-shot sim-to-real transfer on a dexterous hand-arm platform across diverse grasping and contact-rich tool-use tasks. The teacher policy achieves 65.9% average success across six task categories in simulation, while the distilled visual-tactile policy achieves 93% success on real-world cube picking and 53% on the challenging table-cleaning task. Zero-shot generalization to unseen object geometries is also observed on object-picking tasks. Our results suggest that simulated interaction is a key bridge between human videos and deployable dexterous manipulation policies, providing the missing physical supervision needed for scalable robot skill learning from Internet-scale human video data.

0.50

DexSeed: Expanding Human Hand-Object Interactions into Robot Demonstrations for Dexterous Policy Learning

cs.RO ·2026-11-10 ·Huaijin Pi, Zehong Shen, Yong Wang, Kechun Xu, Changpeng Wang +6 more
code/data similarity 0.78
Abstract · Project page: https://robbyant-research.github.io/DexSeed/

We study how to generate diverse, physically executable robot demonstrations for dexterous vision-language-action (VLA) learning. Existing demonstration-generation methods typically rely on costly teleoperated examples. Meanwhile, human hand--object datasets provide a reusable source, but existing transfer methods mainly reproduce given interactions. Turning these interactions into VLA training data further requires coverage of different objects and manipulation locations, together with executable arm and finger actions, and visual observations. To achieve this, we present DexSeed, a framework for low-cost generation of dexterous robot data from human hand--object interactions. Our key idea is to expand human sequences while preserving their grasps and realizing the resulting motions under arm-tracking dynamics in physics simulation. Specifically, we organize source sequences by grasp mode with shared language descriptions. InteractionMesh-based retargeting and arm trajectory augmentation adapt these sequences to the robot hand, different object geometries, and pick-and-place locations while preserving local hand--object relationships. An RL finger-control policy produces executable rollouts, while the arm tracks precomputed trajectories. Rendered observations and recorded actions from successful rollouts are paired with grasp descriptions to fine-tune a VLA. Experiments show improved contact fidelity in retargeting and more reliable whole-arm execution than the evaluated baselines. Simulation evaluation and real-world deployment further demonstrate that a VLA fine-tuned solely on the generated demonstrations can execute language-specified grasps. Project page: https://robbyant-research.github.io/DexSeed/.

0.20

FOMI: A Force-Feedback Manipulation Interface for Teaching Contact-Rich Manipulation

cs.RO ·2026-10-14 ·Yishu Shen, Yiming Luo, Ruilin Wang, Bowen Yang, Shuai Yang +5 more
similarity 0.77
Abstract

Robot-free collection with handheld interfaces enables scalable acquisition of human demonstrations for policy learning. However, existing handheld interfaces often provide limited intuitive force feedback, making contact-rich demonstration collection challenging for human operators. To address this, we present FOMI, a force-feedback manipulation interface with a scissor-shaped mechanism, which transmits object interaction forces directly to the operator's hands through actuation links without force sensors. This intuitive force feedback supports real-time action adjustment during robot-free collection of contact-rich demonstrations. Around FOMI, we build a demonstration collection system that integrates sensor calibration, data acquisition, and synchronization for robot-free collection. By further mapping pose changes and gripper opening of FOMI to robot end-effector poses and gripper commands, the system also supports teleoperation. Across four contact-rich tasks, FOMI improves collection efficiency by approximately 29% and 18% over the best baselines in robot-free collection and teleoperation, respectively. Demonstrations collected with FOMI in both modes enable policies to perform challenging contact-rich manipulation tasks with high success rates.

0.13

DexRoam: Learning Mobile Bimanual Dexterous Manipulation from Egocentric Whole-Body Human Demonstrations

cs.RO ·2026-09-28 ·Rui Zhou, Yibo Yuan, Junkai Zhao, Fangyuan Zhao, Xiaoguang Zhao +2 more
code/data similarity 0.77
Abstract · Project page: https://dexroam.github.io/

Mobile bimanual dexterous manipulation requires continuous coordination of locomotion, whole-body motion, and finger-level dexterity within a single trajectory, creating a severe robot demonstration bottleneck. Egocentric human demonstrations offer a scalable alternative, but prior approaches ease the transfer by simplifying human motion, discarding exactly the fine-grained, coupled structure such tasks depend on. We present DexRoam, a complete system for learning mobile bimanual dexterous manipulation from human demonstrations, in which whole-body motion remains continuous and coupled throughout the human-to-robot transfer process. To enable scalable collection of whole-body human manipulation demonstrations, we develop a tracker-free capture system using only a consumer VR headset and a head-mounted stereo camera, without external cameras or motion trackers. We then perform three explicit alignment stages---embodiment, action-semantic, and temporal---to map captured motion into the robot action space, preserving fine-grained whole-body motion and allowing human and robot demonstrations to be jointly learned by standard VLA policies. Real-world experiments with different VLA backbones show that human demonstrations consistently improve policy learning across training paradigms, raising average success from 29% to 56% on GR00T N1.7 and from 32% to 57% on pi0.5, while matching robot-only training with half the robot demonstrations. Ablations confirm that each alignment stage is necessary. These results highlight the potential of human demonstrations for scalable whole-body mobile manipulation with preserved fine-grained motion structure.

0.48

DexSuite: An All-in-One Framework for Dexterous Manipulation Across Arms, Hands, and Tasks

cs.RO ·2026-10-27 ·Anas Houssaini, Hugo He, Junming Shi, Amin Abyaneh, Ricardo Chahine +17 more
benchmarkcode/data similarity 0.77
Abstract · 7 pages, 7 figures, 2 tables. Project page: https://dexsuiteorg.github.io

Human-level dexterity remains a central open problem in robotics, yet few simulation frameworks cover the full workflow of dexterous manipulation, from setting up a robot to collecting dexterous demonstrations and evaluating policies. We present DexSuite, an all-in-one simulation framework for dexterous manipulation built on the Genesis simulator. DexSuite provides 30 tasks and assembles its 10 arms and 12 end-effectors, from parallel-jaw grippers to dexterous hands, into more than 100 single-arm robots and thousands of bimanual pairs. It also ships a standardized environment API, integrated teleoperation, and simulated tactile sensing. Moreover, we define a benchmark of 16 task-embodiment pairs spanning diverse contact complexities and horizons, and release a dataset of 4,700 successful episodes in simulation from human teleoperation, scripted experts, and learned policies. We release DexSuite as open source and hope others will build on it. Videos and datasets are available at https://dexsuiteorg.github.io

0.27

High Fidelity Capture, Reconstruction, and Transfer of Human Demonstrations for Robot-Assisted Bathing

cs.RO cs.GR ·2026-08-10 ·Arjun S. Lakshmipathy, Jonathan P. King, Ethan Zuo, Rohit Satishkumar, Hongyi Chen +4 more
published similarity 0.75
Abstract · Accepted to Robotics: Science and Systems (RSS) 2026. Official conference page: https://www.roboticsproceedings.org/rss22/p094.pdf

Despite the demand for robots in high-value clinical tasks like bathing, contemporary systems still lack the safety and reliability required for complex, sustained physical interaction with humans. A key challenge hindering the development of such systems is that collecting, understanding, and effectively transferring highly dynamic, contact-rich human bathing demonstrations is difficult, even with modern motion and tactile sensing equipment. We present a straightforward, but effective framework for doing so with high fidelity by utilizing contact regions as a key processing primitive. We use our framework to build a dataset of bathing demonstrations performed by trained clinicians on human subjects. We then use this dataset to design and control an arm-mounted dexterous soft hand to perform bathing tasks on a mannequin using open- and closed-loop strategies. Our dataset is the first to provide high quality synchronized motion, shape, contact, and force during sustained, contact-rich human-human interaction, and our transfer strategies demonstrate effective use of these data across multiple levels of the robotics stack. All relevant materials will be publicly released to enable further advancements in physical human-robot interaction (pHRI) research.

0.38

Touch2Robot: Robot Touch in the Human Demonstration Loop

cs.RO cs.AI ·2026-09-21 ·Shengcheng Luo, Xiaoyang Cheng, Hong Ying, Xiaoying Zhou, Jiaming Jiang +4 more
similarity 0.75
Abstract · 12 pages, 13 figures

Human demonstrations offer a scalable way to collect manipulation data, but their contacts may be unstable or infeasible when transferred to a robot hand. Collecting demonstrations directly on the target robot avoids this mismatch but substantially increases the cost of data collection. To address this trade-off, we present Touch2Robot, a framework that lets humans collect demonstrations while seeing how the target robot hand would contact the object. We capture human hand motion, tactile-glove measurements, and object motion during human manipulation. These recordings guide object-specific RL policies to reproduce the demonstrated object motion while favoring contacts consistent with the recorded human touch. We distill the learned behaviors into a unified real-time retargeter that maps incoming human observations and object geometry to robot hand configurations. During collection, the predicted robot configuration is synchronized with the tracked object pose in simulation to reconstruct robot-object contacts, which are visualized to help the demonstrator adapt subsequent interactions to the target hand. Across four real-world tasks, Touch2Robot improves average real-robot replay completion from 37.9% to 72.1% over visual-only feedback, while reducing the collection time per replay-successful demonstration from 58.6s to 18.2s. Reconstructed target-hand contacts achieve 44.2% F1 against real-robot tactile measurements, and policies trained on Touch2Robot demonstrations improve downstream Diffusion Policy performance by 29.1 percentage points over visual-only feedback. These results show that bringing robot touch into the human demonstration loop improves both the quality and efficiency of scalable dexterous data collection. Project webpage: https://Touch2Robot.github.io/.

0.52