CS Paper Radar

RD-Gen: Random DAG Generator Considering Multi-rate Applications for Reproducible Scheduling Evaluation

Atsushi Yano, Takuya Azumi

cs.SE ·submitted 2026-08-19 21:30 UTC · v2
publishedhighly cited

Abstract

Real-time systems have various requirements such as the deadline and resource constraints. In addition, real-time systems are becoming larger and more complex, and studies on performance analysis and efficient scheduling algorithms are becoming increasingly important. Directed acyclic graph (DAG) models, which can express task dependencies and parallelism, are used for such studies. Random DAG sets are used to demonstrate the effectiveness and objectivity of methods proposed for real-time systems. However, there is no random DAG generation tool available that can generate a DAG set that considers the latest multi-rate applications. Therefore, researchers need to generate random DAG sets on their own, leading to additional effort and reduced reliability and reproducibility. To solve this problem, we propose a random DAG generator considering multi-rate applications for reproducible scheduling evaluation (RD-Gen). RD-Gen also enables batch generation of random DAG sets with different parameters. Case studies are used to demonstrate that RD-Gen can manage various problem settings and DAG study requirements.

DOI
10.1109/ISORC58943.2023.00015

Closest papers

Nearest neighbours by meaning across the whole index.

Awkernel: RTOS Bridging DAG Scheduling Theory and Component-Oriented Real-Time Systems Practice

cs.OS ·2026-10-04 ·Atsushi Yano, Ryo Nishimura, Yutaro Kobayashi, Yuuki Takano, Takahiro Ishikawa-Aso +1 more
code/data similarity 0.71
Abstract

Real-time directed acyclic graph (DAG) scheduling provides a rigorous basis for timing analysis and efficiency in component-oriented real-time systems (CORTS) such as autonomous driving systems, yet challenges remain from the perspectives of both theorists and practitioners. For theorists, no OS natively supports the DAG task model; algorithms are therefore evaluated only analytically or in simulation, ignoring real-hardware overheads. For practitioners, today's CORTS platforms (ROS~2 and AUTOSAR Adaptive Platform) are designed for service composition rather than timing analyzability; adopting DAG scheduling research therefore demands substantial code changes and developer discipline. This paper proposes Awkernel, the first open-source real-time operating system (RTOS) that natively supports real-time DAG scheduling research, bridging DAG scheduling theory and CORTS practice. For theorists, Awkernel is a real-hardware testbed: it exposes a modular OS-native DAG scheduler for easy algorithm implementation, plus a random workload generator and built-in metrics for evaluation. For practitioners, Awkernel is not a full replacement for today's platforms but a CORTS platform maximizing timing analyzability: its familiar publish/subscribe model keeps porting mechanical, mapping each callback to one subtask. Moreover, its function-as-subtask (FasS) API enforces DAG semantics (precedence constraints) without programmer discipline, yielding applications that match the theoretical DAG model and directly inherit its efficiency and safety guarantees. On a Raspberry Pi~4, microbenchmarks confirm microsecond-level scheduling overheads; a global earliest deadline first (GEDF) scheduler fits in 226~lines; and a practitioner ports part of an autonomous driving system using only the FasS API, without reasoning about DAG semantics.

0.41

Equal-Budget Monte Carlo Tree Search versus Randomized-Restart List Scheduling for DAG Workflows: A Controlled Equal-Budget Computational Study

cs.AI cs.DCcs.LG ·2026-10-08 ·Yuyu Zhang
similarity 0.61
Abstract · 19 pages, 4 figures. Preregistered negative result with an open evaluation protocol; companion artifacts archived at 10.5281/zenodo.22929494…

Monte Carlo Tree Search (MCTS) is often proposed for scheduling directed-acyclic-graph (DAG) workflows, yet most studies never run the comparison that could refute it - giving a much simpler method the same search effort. We run that comparison under a controlled protocol. All arms receive an identical budget - the same number of candidate schedules built and evaluated: an MCTS scheduling method, preregistered as the main arm; a randomized-restart list scheduler with no search tree as the control; and a textbook-UCT MCTS arm as a registered follow-up on the same domain. The analysis plan was locked before data collection; an independent checker confirmed all 768 confirmation-stage schedules valid with correct finish times. At the main budget of 2048 evaluated schedules, MCTS is 2.88% worse than the restarts (95% CI [-3.62%,-2.15%]; the 72 of 96 held-out instances with positive baseline-relative headroom). The deficit is not budget starvation: on the separate exploration pool restarts self-improve by 1.85% where MCTS gains 0.24%, and 700 of 720 of MCTS's first results are merely the warm start it was handed. The studied selection rule locks deterministically onto the first-expanded child, keeping its trials correlated while restarts draw gains from the tails; the causal link to makespan remains an inference. A structural map locates where the tree stops paying: restarts win on sparse irregular workflows, no difference is detectable on regular layered ones, and dense ones leave no room to improve. Swapping the rule for textbook UCT removes most of the deficit (-0.26%, 95% CI [-0.71%,+0.23%]) without reversing its sign. Results are confined to a controlled synthetic domain (N in {8,16,32} tasks, 2-8 processors, budgets up to 2048); we make no claim about larger budgets.

0.27

MoSAIC: Learning DAG Scheduling Heuristics from Optimal Schedules through Motif-Aware Recovery and LLM-Guided Reasoning

cs.AR cs.IRcs.LG ·2026-10-10 ·Shiva Ahir, Hashmath Shaik, Alex Doboli, Nadeem Yaseen, Simona Doboli
similarity 0.59
Abstract

Efficient task scheduling in heterogeneous computing systems remains a fundamental challenge in embedded and high-level synthesis flows. This paper presents MoSAIC (Motif-aware Scheduling with AI-driven Cognition), a learning-based framework that bridges the gap between exact and heuristic scheduling approaches for DAG-based applications. The system uses the reasoning capabilities of large language models (LLMs) to learn the relationships between DAG structures and scheduling priority functions. The framework first leverages the OR-Tools CP-SAT solver [4] to generate optimal schedules, which are then used to supervise the learning of compact priority-based scheduling functions through Bayesian Optimization. These learned heuristics capture relationships between scheduling decisions and structural graph features such as rank, depth, and fanout, enabling the construction of a reusable knowledge base across diverse DAG instances. Experimental results across synthetic graph families and real-world benchmarks, including PolyBench and MachSuite, show that the learned heuristics consistently improve over classical approaches such as HEFT [2], while maintaining low runtime overhead. The results indicate that combining optimal supervision with learning-based generalization provides a practical approach for scalable and adaptive task scheduling.

0.14

PeakBench: Benchmarking Resource-Aware Tool Invocation in LLM Agents

cs.AI cs.SE ·2026-08-25 ·Zhi-Kai Chen, Xu-Xiang Zhong, Song-Yan Li, De-Chuan Zhan, Han-Jia Ye
benchmarkcode/data similarity 0.57
Abstract

LLM agents increasingly solve tasks by invoking multiple tools, where parallel execution is essential for low latency but difficult to manage safely. Existing agent benchmarks primarily evaluate tool selection, argument generation, and end-to-end success under mostly serial execution, largely overlooking valid parallelization and resource-constrained scheduling. This missing scheduling dimension creates a practical failure mode: serial execution is safe but slow, while resource-agnostic parallel execution is fast but prone to avoidable resource overflows. To address this gap, we introduce PeakBench, a benchmark of executable multi-tool workflows with execution-grounded dependency annotations and measured resource profiles. A central challenge in evaluating such workflows is attribution: failures and inefficiencies may arise from incorrect dependency planning, poor resource-constrained scheduling, or both. PeakBench addresses this challenge with a two-part evaluation framework that disentangles logical planning from physical scheduling, with dedicated metrics for each dimension. Using this framework, we show that strong logical planning does not reliably translate into safe or efficient execution under resource constraints. We further show that exposing resource information can reduce avoidable overflows and improve resource utilization, making PeakBench a useful testbed for diagnosing resource-aware agent behavior. Code is available at https://github.com/Czzzk/Staggering-the-Peaks.

0.54

BOOSTEDSOSA: Accelerated Inferencing for Low Variance Stochastic Online Scheduling

cs.AR ·2026-08-26 ·Adam H. Ross, Riccardo Revalor, Aryan Singh, Ayush Jain, Debjit Pal
similarity 0.55
Abstract · 14 pages, 10 figures, 6 tables (Submitted to IEEE TCAD)

Heterogeneous scheduling in stochastic, online envi- ronments, such as high-performance computing (HPC) systems, presents a significant challenge. Stochastic Online Scheduling Accelerators (SOSAs) offer a promising solution, but their effectiveness is compromised by a reliance on runtime estimates provided by users. These estimates introduce substantial vari- ance into the scheduling process (mean MAE in hundreds of Core-Days), thereby weakening the competitiveness of Stochastic Online Scheduling algorithms as their competitive-ratio bound increases with runtime variability. To address this limitation, we introduce BOOSTEDSOSA, a dual-FPGA ML-assisted Scheduling architecture that integrates a Machine Learning predictor for expected processing times, with a novel temporal-aware training policy. The predictor estimates job runtimes using only scheduler parameters available at submission time, enabling its use in existing HPC systems. Using historical real-world HPC job data (from the Argonne Leadership Comput- ing Facility, MIT Supercloud and UIUC Blue Waters workload datasets), we show that the predictor reduces MAE by up to 63.85% compared to user runtime estimates, and the additive training policy reduces MAE by up to 71.88% compared to a static model. End-to-end, BOOSTEDSOSA achieves an average 17x speedup over an AVX-optimized software baseline and processes up to 1,711 jobs/seconds

0.26

Rolling Round-Robin Rate: Standard Heterogeneous Throughput for SPEC CPU

cs.PF cs.ARcs.DC ·2026-08-30 ·Mahesh Madhav, Christoph Müllner, Jiangning Liu, Philipp Tomsich, Jeff Baxter
publishedbenchmark similarity 0.55
Abstract · 6 pages, 1 figure, Presented at the 2026 IEEE International Symposium on Workload Characterization (IISWC 2026), Boulder, Colorado

SPEC CPU has long provided a common foundation for comparing processor, compiler, memory-system, and platform performance. Its multi-copy SPECrate mode measures homogeneous throughput by running many copies of the same benchmark at once. That mode remains valuable, but modern cloud and server systems commonly run heterogeneous collections of jobs whose interactions are shaped by shared caches, memory bandwidth, power management, operating-system scheduling, and noisy neighbors. SPEC CPU 2026 introduces Rolling Round-Robin Rate (RRR), an exhibition run style that uses the existing rate suites to generate deterministic heterogeneous multiprogrammed workloads. This paper describes RRR as a benchmark methodology and proposes a SPEC-like scoring model for future RRR reporting: compute per-benchmark average throughput and coefficient of variation from per-copy ratios, compute a SPEC-style geometric mean for each copy across the suite, and average that population of copy geomeans to form a suite score with its own coefficient of variation. RRR therefore preserves the familiar SPEC throughput tradition while exposing richer information about variability, interference, and heterogeneous-system behavior.

0.28

TAO: Tool-Aware Joint Scheduling for LLM-Based Agentic Serving

cs.DC ·2026-10-27 ·Shuhuai Li, Shengdong Ye, Dongdong Ge, Yinyu Ye, Jianghao Lin
community pick similarity 0.55
Abstract · 26 pages, 11 figures

Agentic services alternate between model inference on clustered GPUs and external tools on distributed CPUs. In this scenario, existing systems (1) overlook tool-return readiness in service evaluation, wasting limited resources, and (2) use heuristic strategies to decide admission and placement on GPUs, resulting in suboptimal scheduling decisions. To bridge this gap, we present TAO, a tool-aware joint scheduling framework for LLM-based agentic serving. Its value interface combines near-term tool readiness, node-specific cache credit with time-aware decay, and token footprint; a dynamic program jointly selects and places waiting sessions under capacity constraints. Across the 12 reported model-workload-concurrency settings, TAO reduces latency by up to 26.8%, reduces mean time to first token (TTFT) by up to 36.3%, and increases decode throughput by up to 29.5% relative to the best evaluated state-of-the-art baseline for each metric.

0.47

Tool Waiting and Re-arrival in Compile-Time-Static LLM Serving: Cost Mechanisms and Configuration Selection

cs.PF ·2026-09-28 ·Dongkyeom Jang, In-Nea Wang, Junho Jeong
similarity 0.54
Abstract · 24 pages, including 7 pages of supplementary material

In agentic LLM services, a session calls an external tool, waits for it, and re-arrives to continue inference. Statically compiled NPU serving can fix the batch bucket set, the maximum batch size, and the number of KV cache slots at compile time. We define such an environment as a compile-time-static serving substrate and analyze the execution-time cost that tool waiting and re-arrival incur in it. On a single LLM instance, we run synthetic workloads following a measured tool waiting time distribution and compare, on the same inputs, a baseline configuration with settings {1, 2, 4, 8}, 8, and 8 against configurations that change some of them. Because re-arrival times differ across configurations, we build a simulator that replays request processing in time order, select the candidate with the lowest predicted cost among 2,077 configurations, and validate it on new inputs. We identify three mechanisms: discrete batch alignment, KV cache survival, and prefill interference. At a concurrency of 6, absent from the bucket set, tool waiting lowered the padding ratio (0.235 to 0.120) yet increased decode execution time 1.51-fold, so padding alone did not indicate cost. On new inputs at a concurrency of 8, where the baseline reused KV in 9 of 24 re-arrivals, enlarging the maximum batch size alone cut execution cost by 8.25%, and the selected configuration, which also adjusted the bucket set, by 9.72%. Where 17 of 18 re-arrivals were already reused, the effect was 0.59%. Compile-time configurations should thus be selected by diagnosing KV reuse loss and the resulting change in execution.

0.27