CS Paper Radar

Tool Waiting and Re-arrival in Compile-Time-Static LLM Serving: Cost Mechanisms and Configuration Selection

Dongkyeom Jang, In-Nea Wang, Junho Jeong

cs.PF ·submitted 2026-09-28 09:02 UTC · v1

Abstract

In agentic LLM services, a session calls an external tool, waits for it, and re-arrives to continue inference. Statically compiled NPU serving can fix the batch bucket set, the maximum batch size, and the number of KV cache slots at compile time. We define such an environment as a compile-time-static serving substrate and analyze the execution-time cost that tool waiting and re-arrival incur in it. On a single LLM instance, we run synthetic workloads following a measured tool waiting time distribution and compare, on the same inputs, a baseline configuration with settings {1, 2, 4, 8}, 8, and 8 against configurations that change some of them. Because re-arrival times differ across configurations, we build a simulator that replays request processing in time order, select the candidate with the lowest predicted cost among 2,077 configurations, and validate it on new inputs. We identify three mechanisms: discrete batch alignment, KV cache survival, and prefill interference. At a concurrency of 6, absent from the bucket set, tool waiting lowered the padding ratio (0.235 to 0.120) yet increased decode execution time 1.51-fold, so padding alone did not indicate cost. On new inputs at a concurrency of 8, where the baseline reused KV in 9 of 24 re-arrivals, enlarging the maximum batch size alone cut execution cost by 8.25%, and the selected configuration, which also adjusted the bucket set, by 9.72%. Where 17 of 18 re-arrivals were already reused, the effect was 0.59%. Compile-time configurations should thus be selected by diagnosing KV reuse loss and the resulting change in execution.

Comment
24 pages, including 7 pages of supplementary material

Closest papers

Nearest neighbours by meaning across the whole index.

A Controlled Experimental Evaluation of Configuration and Cache Architecture in LLM Serving Engines

cs.DC cs.LGcs.PF ·2026-11-04 ·Muhammad Faizan Anwar, Sina Keshvadi
benchmarkcode/data similarity 0.73
Abstract · 29 pages, 14 figures, 7 tables. Artifact: https://github.com/FaizanAnwar01/llm-serving-config-eval

Multi-agent LLM applications repeat most of their prompt tokens across requests, and serving engines reuse the cached state of shared prefixes. vLLM and SGLang reuse it at different granularities, and benchmarks of their default deployments report large performance gaps, usually credited to the cache. Such comparisons rarely control for other configuration differences. One of them, whether a long prompt is prefilled in chunks, is set by each engine's defaults from the hardware and the release, and it confounds the comparison. We built a reproducible testbed on Kubernetes and a seeded multi-agent workload generator, and compared the two engines under vendor defaults and with chunked prefill matched. SGLang's configuration is the same in both arms, which makes it an internal control across independently provisioned deployments. Under defaults, vLLM's median time to first token is up to 64x SGLang's. Matching one setting removes 78% of the capacity gap where that gap is largest and 30 to 67% of the latency gap. Near saturation the remaining latency gap reflects queue growth. A fluid queue model driven only by a 4.4% throughput shortfall reproduces it, and shows that such a gap scales with the length of the benchmark run. What survives matching is a tail-latency advantage of 2.4 to 6.4x at equal throughput, consistent with cache-aware ordering of waiting requests. We derive six recommendations for comparing serving engines.

0.32

TAO: Tool-Aware Joint Scheduling for LLM-Based Agentic Serving

cs.DC ·2026-10-27 ·Shuhuai Li, Shengdong Ye, Dongdong Ge, Yinyu Ye, Jianghao Lin
community pick similarity 0.73
Abstract · 26 pages, 11 figures

Agentic services alternate between model inference on clustered GPUs and external tools on distributed CPUs. In this scenario, existing systems (1) overlook tool-return readiness in service evaluation, wasting limited resources, and (2) use heuristic strategies to decide admission and placement on GPUs, resulting in suboptimal scheduling decisions. To bridge this gap, we present TAO, a tool-aware joint scheduling framework for LLM-based agentic serving. Its value interface combines near-term tool readiness, node-specific cache credit with time-aware decay, and token footprint; a dynamic program jointly selects and places waiting sessions under capacity constraints. Across the 12 reported model-workload-concurrency settings, TAO reduces latency by up to 26.8%, reduces mean time to first token (TTFT) by up to 36.3%, and increases decode throughput by up to 29.5% relative to the best evaluated state-of-the-art baseline for each metric.

0.47

ServeTwin: A Benchmark-Validated Simulator for Distributed LLM Architecture Exploration

cs.PF cs.DC ·2026-10-02 ·Sungjoon Park, Changue Jung, Kyungno Joo, Mincheol Kang, Jaehyung Ahn +2 more
benchmark similarity 0.72
Abstract

Evaluating distributed LLM serving designs on physical clusters is costly. Yet existing simulators provide only subsets of the capabilities needed for realistic design exploration: stateful closed-loop execution, timing prediction without profiling target hardware, and direct execution of unmodified serving benchmarks. We present ServeTwin, a closed-loop simulator that couples specification-driven analytical timing with a stateful serving loop. This coupling captures feedback among request completion, scheduling, queue state, and KV-cache evolution, including prefill-decode disaggregation and multi-turn agent workloads. ServeTwin avoids target-hardware operator profiling through iSTAGE, an analytical trace generator that derives per-iteration traces from model and engine specifications while representing ragged batches and discrete engine mechanisms such as CUDA-graph batch padding. It further decomposes execution time into component-owned throughput, scheduler, and runtime costs. This ownership lets unaffected parameters transfer across platforms and confines recalibration to changed hardware or software components. ServeTwin implements a vLLM-compatible interface and runs unmodified serving benchmarks. Against real deployments, it reproduces InferenceX's steady-state throughput-interactivity frontier with a 3.6% mean error and predicts LMBenchmark's multi-turn performance with a 9.9% error while tracking KV-cache evolution. Pre-silicon sweeps reveal that the preferred HBM bandwidth-capacity tradeoff reverses across workload states and that increasing concurrency shifts the bottleneck from memory bandwidth to scheduler and runtime overheads. Together, these capabilities enable practical exploration of distributed LLM serving systems before target hardware is available.

0.19

Ready Cohorts: Bounding GPU Opportunity and Avoiding Host Round Trips in LLM-Agent Control

cs.DC cs.AIcs.OS ·2026-08-12 ·Josef Liyanjun Chen
benchmarktheorycode/data similarity 0.71
Abstract · 14 pages, 4 figures. Includes formal proofs, trace provenance, and a reproducibility appendix. Code and artifacts: https://github.com/josefc…

We introduce a mechanism that improves LLM-agent execution: keeping four-byte, GPU-computed control-path routing decisions on-device, avoiding a round-trip to host memory for redispatch. It is faster than host-dispatch in all 36 placements x mechanisms settings in our benchmark across four named GPUs with row-median speedup of 1.19x-2.39x, and outputs are correct, matching an independent host implementation, for all 14,557,440 calls in all configurations, in both tested mechanisms. Agent control paths can be deterministic. Their transitions between LLM calls and external tool calls can be GPU-accelerated by batching across agents and time. We define a cohort of transitions with launch times in a window, and study four shares of GPU-active time: a fixed-partition baseline F, an optimal P*, an upper bound U, and an online result A. Under assumptions of uniform relative launch deadlines, infinite capacity, and zero service times, we compute P* with a custom dynamic program and validate our simulator against it. We replay an anonymized 851-session trace, shown in full as a panel, stationary-ized with a Poisson process. With 100,000 target active agents and a launch deadline of 50 ms, where the headline results have K=256, we find F=30.19%, P*=43.00%, U=45.85%; our method for computing P* reveals that 81.83% of this opportunity is recoverable from cohort packing at fixed window ends. Our method for U relies on a novel notion of route-key, used only as a proxy (via conditional statistics) and does not purport to establish route-equivalence. We find a nested graph that retains some host-side decisions slower in all 60 configurations (five placements).

0.30

TripleKV: Predict, Prefetch, Protect -- KV Cache Management for AI Agents

cs.DC cs.ARcs.OS ·2026-11-18 ·Shashwat Jaiswal, Chloe Alverti, Mengmei Ye, Chen Wang, Hubertus Franke +3 more
similarity 0.71
Abstract · 13 pages, 23 figures

LLM agents alternate between inference and tool execution, repeatedly reusing their growing context across calls. Under high concurrency, their combined key-value (KV) cache working set can reach hundreds of GiB, far exceeding GPU memory capacity. As idle KV cache blocks are evicted to slower storage tiers, returning agents incur expensive retrievals that stall inference. To address this problem, we present \emph{TripleKV}, a three-tier KV cache management system that hides the delays of these retrievals. %exploits tool execution to hide these delays. In agentic workloads, the KV blocks needed by the next inference request are known in advance; only the time of their reuse is uncertain. TripleKV uses a tool-aware latency predictor to estimate when each tool call will complete and prefetches the required KV blocks from SSD into host DRAM ahead of time. Unlike GPU prefetching, this avoids reserving scarce GPU memory and interfering with concurrent inference requests. To further improve DRAM utilization, TripleKV eliminates duplication of GPU-resident blocks in DRAM, and introduces a victim-cache mechanism that refills blocks from SSD upon their eviction from GPU memory. Across data, web, and coding agents, TripleKV reduces the fraction of requests requiring critical-path SSD reads from 45--76\% to under 10\%. It also reduces P95 time to first token (TTFT) by up to 49\% compared with vLLM extended with DRAM and SSD KV-cache tiers, and achieves 1.5-7$\times$ lower P95 TTFT than recent agent-aware systems.

0.21

VelServe: Taming Decode Jitters in LLM Inference with Tail-Calibrated Scheduling

cs.AI ·2026-11-13 ·Ishaan Datta, Alind Khare, Koushik Kumar Dey, Ratnesh Jamidar, Anand Kumar Singh
similarity 0.71
Abstract

Interactive LLM services must meet latency service-level objectives (SLOs) for the time to first token (TTFT) and the time between tokens (TBT), as streaming and soft real-time applications require predictable token delivery. We identify decode jitters in both aggregated and disaggregated serving. A jitter delays every request in the batch, and long responses span hundreds of steps, so even rare overruns cause many SLO violations. In aggregated serving, SLO-aware schedulers set each step's prefill budget until its predicted latency just meets the TBT target, leaving no room for mispredictions or host stalls. Disaggregation meets average TBT targets at a cost in capacity, yet the steps that admit new requests still run late. We present \sysname, a scheduler that calibrates how much prefill work each decode step carries using the measured tail of its own iteration latency. The SLO determines how rare a late step must be, and \sysname leaves enough headroom in each iteration to prevent overruns and meet the target decode latency. This headroom slows prefill, so \sysname serves the shortest waiting prompt first. When TTFT deadlines grow with prompt length, the long prompts it delays have the most time to spare. Under disaggregation, it spaces admissions so that no request waits on more slow admission steps than its P99 target allows. On three attention families and varying workloads, \sysname sustains 2.4--2.9$\times$ the SLO goodput of the strongest baseline on Qwen3-8B and DeepSeek-V4-Flash, and at least 4.4$\times$ on DeepSeek-V2-Lite. With prefill and decode disaggregated on eight GPUs, \sysname meets the SLO for more than twice as many requests as state-of-the-art baselines.

0.19

TomasuLLM: Out-of-Order Speculative Execution for LLM Agents

cs.CL cs.OScs.SE ·2026-09-22 ·Jiangnan Yu, Ceyu Xu, Mengming Li, Shiyu Huang, Yiran Xia +4 more
benchmark similarity 0.70
Abstract

Long-running tools can dominate coding-agent latency: compilers, test suites, and repository commands take seconds to minutes while the agent idles. This observation stall presents the same tension that drove out-of-order processors -- asequential interface hides work that can be predicted and started early, but a speculative result may become visible only after it and every earlier step have been validated. We present TomasuLLM, a runtime that executes agent tool calls out of trajectory order while preserving task-execution correctness. It drafts future actions, runs them in isolated copy-on-write sandboxes, traces their dependencies and effects, and commits results in trajectory order only after validation against committed state. Across three benchmarks spanning sub-second to minutes-long tool calls, TomasuLLM improves the reported benchmark means and scales with tool latency: 1.31x on 100 SWE-bench Verified tasks, 1.35x on 28 Terminal-Bench 2.0 tasks, and 1.27x matched progress on 18 SWE-Marathon sessions. Across 4,010 audited commit-validation records, it produces zero false accepts.

0.17

Vesta: Queueing-Aware LLM Scheduling for Real-World Workloads

cs.DC ·2026-10-10 ·Lancheng Zou, Bowen Li, Wei Mao, Wenbin Ye, Lecheng Li +4 more
similarity 0.70
Abstract

Agentic applications generate multi-turn sequences of LLM requests, with each new turn extending the context accumulated from prior interactions and tool calls. Prefix caching reuses the KV cache of earlier turns and avoids redundant prefill, but routing every turn to its cache-affine instance can create severe local queues while capacity remains idle elsewhere. Remote KV cache access relaxes this tension, yet migrating execution adds transfer work and is harmful when the cluster is already congested. Thus, deciding where to execute a request requires reasoning jointly about cache locality, queueing, and the current operating point of the cluster. We present Vesta, a queueing-aware scheduler for distributed agentic LLM serving. Vesta assigns each session a stable holder for its authoritative KV cache while independently selecting an executor for every request. Grounded in classical queueing theory, its objective accounts for backlog, reusable prefixes, KV cache transfer, and the queueing externality of additional service demand; it migrates execution to recover idle capacity when beneficial and favors placements that add the least prefill and transfer work as congestion rises. Vesta also migrates reusable prefixes across length buckets to avoid cold starts. On real-world agentic workloads, Vesta improves throughput by 14.0\% and reduces mean TTFT by 57.8\% over the state-of-the-art scheduler in a PD-colocated deployment. In PD-disaggregated deployments, it reduces mean TTFT by up to 18.1\% and P99 TTFT by up to 29.0\% at matched throughput.

0.15