CS Paper Radar

ServeTwin: A Benchmark-Validated Simulator for Distributed LLM Architecture Exploration

Sungjoon Park, Changue Jung, Kyungno Joo, Mincheol Kang, Jaehyung Ahn, Sehwan Lee, Sangjoon Kim

cs.PF cs.DC ·submitted 2026-10-02 03:06 UTC · v1
benchmark

Abstract

Evaluating distributed LLM serving designs on physical clusters is costly. Yet existing simulators provide only subsets of the capabilities needed for realistic design exploration: stateful closed-loop execution, timing prediction without profiling target hardware, and direct execution of unmodified serving benchmarks. We present ServeTwin, a closed-loop simulator that couples specification-driven analytical timing with a stateful serving loop. This coupling captures feedback among request completion, scheduling, queue state, and KV-cache evolution, including prefill-decode disaggregation and multi-turn agent workloads. ServeTwin avoids target-hardware operator profiling through iSTAGE, an analytical trace generator that derives per-iteration traces from model and engine specifications while representing ragged batches and discrete engine mechanisms such as CUDA-graph batch padding. It further decomposes execution time into component-owned throughput, scheduler, and runtime costs. This ownership lets unaffected parameters transfer across platforms and confines recalibration to changed hardware or software components. ServeTwin implements a vLLM-compatible interface and runs unmodified serving benchmarks. Against real deployments, it reproduces InferenceX's steady-state throughput-interactivity frontier with a 3.6% mean error and predicts LMBenchmark's multi-turn performance with a 9.9% error while tracking KV-cache evolution. Pre-silicon sweeps reveal that the preferred HBM bandwidth-capacity tradeoff reverses across workload states and that increasing concurrency shifts the bottleneck from memory bandwidth to scheduler and runtime overheads. Together, these capabilities enable practical exploration of distributed LLM serving systems before target hardware is available.

Closest papers

Nearest neighbours by meaning across the whole index.

MAServeBench: Benchmarking Multi-Agent LLM Serving Systems with Hierarchical Collaboration Workloads

cs.MA ·2026-10-29 ·Shengxuan Qiu, Haochen Huang, Shuzhang Zhong, Zizhuo Fu, Zebin Yang +1 more
benchmarkcode/data similarity 0.74
Abstract

Large language model (LLM)-based multi-agent systems (MAS) coordinate specialized agents to solve complex tasks, turning each user request into interdependent model and tool operations. Unlike independent requests, these operations become ready at different times and consume evolving context as agents coordinate and exchange results. This creates changing patterns of concurrency, computation, and memory demand that can expose different bottlenecks in LLM serving hardware. Yet benchmarking these effects requires capturing the collaboration rules that generate serving workloads, beyond the requests observed during execution. We present MAServeBench, a benchmark that treats multi-agent collaboration as a configurable dimension of serving workloads for LLM serving and hardware evaluation. Its composable stages capture how agents coordinate and exchange context in documented MAS workflows, enabling native executions to generate different workloads even when task inputs and tools remain unchanged. Hierarchical Semantic Traces preserve realized operations and dependencies for reproducible fixed-work replay and as inputs to architecture simulators. Task-linked measurements connect these workloads to serving execution and GPU/NPU hardware behavior, revealing why serving efficiency does not always translate into timely task completion. The benchmark code is available at https://github.com/ShengxuanQiu/MAServeBench.

0.35

From LLM Inference to Agentic Workloads: Characterization and Implications for Serving Systems

cs.OS cs.AIcs.DCcs.MA ·2026-08-15 ·Chaokun Chang, Yukun Zhou, Kaihua Fu, Dakai An, Tianyu Feng +8 more
benchmarkhighly cited similarity 0.74
Abstract

Agentic applications are shifting AI serving from isolated model inference to long-running workloads in which LLMs coordinate tools, environments, and persistent state. However, the system behavior of these workloads---where latency, cost, and bottlenecks arise---remains poorly characterized, leaving serving systems to rely on assumptions built for conventional inference. We present AgentSysBench, a benchmark suite and measurement toolkit with ten representative agentic applications and unified systems-level instrumentation. Across controlled deployments and production traces, we identify six properties that distinguish agentic workloads from conventional LLM serving: (1) execution is heavyweight and stateful, with non-LLM components dominating latency in 5 of 10 applications and sandbox working-set memory peaking at 28 GB per session; (2) applications compose components with heterogeneous resource affinity---GPU-bound inference, memory-bound retrieval, CPU-bound sandboxes---whose task latencies diverge by up to 32x; (3) bottlenecks shift across requests, models, and deployments; (4) production sessions hold state idle for minutes to hours between active steps; (5) a control-plane tax---auxiliary LLM calls and context overhead from tool schemas and observations---crowds out productive compute and context; and (6) production traces from three applications reveal heavy cross-request redundancy in search queries and web fetches, exposing a large caching opportunity. Four design explorations demonstrate that these findings are actionable: task-aware serving reduces latency by 29--40%, communication-aware placement by up to 4.5x, state offloading reduces memory usage by 4.6x, and tool-result caching removes 35.2% of redundant search calls and saves 19.3% of aggregate search latency.

0.44

Simulate Before You Scale: High-Fidelity LLM Inference Planning Without GPUs

cs.PF ·2026-10-09 ·Dipanwita Guhathakurta, Mert Toslali, Srinivasan Parthasarathy, Jing Chen, Michael Kalantar +4 more
top venuecode/data similarity 0.74
Abstract · This paper is accepted at ACM SIGMETRICS 2027

Deploying large language model (LLM) inference at scale requires jointly selecting hardware layout, parallelism strategy, scheduling policy, admission control, and request routing to meet latency and throughput targets. These choices interact: a routing decision that improves cache locality can concentrate load, and an admission threshold that triggers only at saturation allows queues to grow deep enough to degrade critical-tier traffic. Evaluating candidates on GPU clusters is too expensive for iterative exploration, yet existing predictive tools either ignore batching and queueing dynamics or model only fragments of the pipeline. In this paper, we present BLIS, a deterministic, CPU-only discrete-event simulator that models the full inference serving pipeline (admission, routing, scheduling, prefill/decode execution, KV-cache management, and preemption). BLIS pairs analytical basis functions with learned scaling coefficients and overhead terms, fit once globally, to predict step latency without per-model or per-GPU profiling. Across 36 experiments spanning six models and three GPU types, BLIS achieves 6.7% median end-to-end error while running around 200 times faster than real execution. In a configuration search over 420 serving configurations for Llama-2-70B, BLIS identifies a 4-GPU deployment that meets a 300ms mean TTFT service-level objective (SLO), whereas competing tools either require double the GPUs or recommend configurations that fail under load. Two policies evolved entirely in simulation were validated on real hardware and merged into llm-d, a widely adopted open-source platform for distributed LLM serving: an admission policy that reduces critical-tier TTFT P90 by up to 82%, and a flow-control policy that reduces E2E P50 latency by 32-48% on overloaded workloads.

0.40

VIPER: Architecture-Aware Performance Modeling for Processing-in-Memory Design-Space Exploration

cs.AR ·2026-08-24 ·Haoran Geng, Tomas Sousa Pereira, Xiaoyang Lu, Xian-He Sun, Michael Niemier +1 more
code/data similarity 0.73
Abstract · 14 pages, 12 figures. Source code available at https://github.com/Notre-Dame-HW-SW-Codesign-Lab/VIPER

Processing-in-Memory (PIM) promises to reduce data movement overhead by executing computation in or near memory, but its realized application speedup remains highly design-dependent. Non-offloadable host execution, host-PIM transfers, limited PIM capacity, and device programming latency can limit end-to-end speedup, making fast early-stage design-space exploration (DSE) essential. However, existing PIM evaluation methods remain limited: circuit- and device-level tools cannot capture these end-to-end PIM performance factors, while cycle-accurate simulation is too slow for iterative DSE. To address this gap, we present VIPER, a unified, lightweight, and architecture-aware performance evaluation framework for PIM DSE. VIPER profiles host execution once and combines the measured host behavior with a PIM-aware analytical engine that sweeps PIM-side parameters across candidate designs. It supports both Processing Near Memory (PNM) and Processing Using Memory (PUM) under task-offloading and data-triggered execution by capturing host-PIM transfer, array access, in-memory computation, device programming latency, and capacity-induced partitioning, providing rapid architecture-aware performance estimates for iterative DSE without repeated cycle-accurate simulation. We validate VIPER against a commercial UPMEM system and more than 400 cycle-accurate gem5 configurations. VIPER predicts the UPMEM offloading decision and break-even region a priori, and, with a refined transfer model, captures the measured peak-and-rolloff behavior with 12\% mean speedup error across the DPU sweep (6\% up to the 256-DPU peak). Against gem5, VIPER achieves less than 10\% error while reducing evaluation time from hours to under one minute. Case studies of UPMEM, ReRAM/FeFET crossbars, and IMCRYPTO show that architecture-aware DSE reveals key performance trade-offs that device-level evaluation misses.

0.24

LLMRunner: Closed Workload Model Performance Testing Framework for LLM Servings

cs.PF ·2026-11-11 ·Arush Upadhyaya, Debadatta Mishra
similarity 0.73
Abstract · Closed-loop performance benchmarking of LLM systems

Performance testing large language model (LLM) serving engines is a crucial requirement considering the criticality of the infrastructure for deploying conversational AI at scale. Most of the benchmarking tools used to carryout performance evaluation of LLM serving do not capture realistic workload orchestration unlike closed workload performance testing infrastructure used in other domains such as web and database engines. For example, state-of-the-art LLM benchmarks for performance testing model traffic as streams of independent single-turn and stand-alone requests omitting the end-user behavior such as think-time between conversational turns. We present LLMRunner, a performance tester for LLM serving that addresses this gap by providing a framework to generate realistic load consisting of multi-turn conversations with configurable end-user parameters such as number of users in the workload loop, think-time distributions etc. Moreover, LLMRunner provides declarative matrix-sweep experiment plans, integrated GPU and KV-cache monitoring, and an automated artifact collection and plotting subsystem. We use LLMRunner to comparatively analyze the performance of LLM serving when NVIDIA CUDA Unified Virtual Memory (UVM) is used as a drop-in replacement memory allocator for the Key-Value cache (KV-Cache). Our test demonstrates that UVM incurs no measurable throughput or latency penalty compared to the baseline memory allocation technique for non-oversubscription scenarios.

0.15

Tool Waiting and Re-arrival in Compile-Time-Static LLM Serving: Cost Mechanisms and Configuration Selection

cs.PF ·2026-09-28 ·Dongkyeom Jang, In-Nea Wang, Junho Jeong
similarity 0.72
Abstract · 24 pages, including 7 pages of supplementary material

In agentic LLM services, a session calls an external tool, waits for it, and re-arrives to continue inference. Statically compiled NPU serving can fix the batch bucket set, the maximum batch size, and the number of KV cache slots at compile time. We define such an environment as a compile-time-static serving substrate and analyze the execution-time cost that tool waiting and re-arrival incur in it. On a single LLM instance, we run synthetic workloads following a measured tool waiting time distribution and compare, on the same inputs, a baseline configuration with settings {1, 2, 4, 8}, 8, and 8 against configurations that change some of them. Because re-arrival times differ across configurations, we build a simulator that replays request processing in time order, select the candidate with the lowest predicted cost among 2,077 configurations, and validate it on new inputs. We identify three mechanisms: discrete batch alignment, KV cache survival, and prefill interference. At a concurrency of 6, absent from the bucket set, tool waiting lowered the padding ratio (0.235 to 0.120) yet increased decode execution time 1.51-fold, so padding alone did not indicate cost. On new inputs at a concurrency of 8, where the baseline reused KV in 9 of 24 re-arrivals, enlarging the maximum batch size alone cut execution cost by 8.25%, and the selected configuration, which also adjusted the bucket set, by 9.72%. Where 17 of 18 re-arrivals were already reused, the effect was 0.59%. Compile-time configurations should thus be selected by diagnosing KV reuse loss and the resulting change in execution.

0.27

Compositional Performance Modeling of LLM Inference Clusters with Hierarchical KV Caching

cs.PF cs.DC ·2026-10-11 ·Ruiyang Ma, Sheng Qi, DaiKang Kuang, Teng Ma, Guojie Luo
similarity 0.71
Abstract

Design-space exploration of LLM inference clusters requires predicting how hardware and serving policies interact with hierarchical key-value (KV) caching. Isolated operation profiles alone do not determine cluster latency: reuse changes computational demand, while KV location, capacity, and contention govern execution order. We present a compositional discrete-event simulator based on separating local service costs from shared resource and KV availability. Compute and transfer models calibrated on one-prefill/one-decode (1P-1D) deployments are reused across compatible workers, enabling policy and topology comparisons without per-configuration latency fitting. Validation against SGLang covers Qwen3-8B and Qwen3-32B on 1P-1D and 3P-1D clusters. Mean request end-to-end latency error is 1.34% for question answering and 6.36% for captured coding sessions, measured as mean absolute percentage error. CPU simulation reduces replay turnaround by 15.33 times on average; real replay includes prescribed arrival gaps. Measured session-affinity and simulated retention studies demonstrate how the framework guides policy selection by predicting the joint effects on computation, latency, and KV occupancy.

0.14

A Controlled Experimental Evaluation of Configuration and Cache Architecture in LLM Serving Engines

cs.DC cs.LGcs.PF ·2026-11-04 ·Muhammad Faizan Anwar, Sina Keshvadi
benchmarkcode/data similarity 0.71
Abstract · 29 pages, 14 figures, 7 tables. Artifact: https://github.com/FaizanAnwar01/llm-serving-config-eval

Multi-agent LLM applications repeat most of their prompt tokens across requests, and serving engines reuse the cached state of shared prefixes. vLLM and SGLang reuse it at different granularities, and benchmarks of their default deployments report large performance gaps, usually credited to the cache. Such comparisons rarely control for other configuration differences. One of them, whether a long prompt is prefilled in chunks, is set by each engine's defaults from the hardware and the release, and it confounds the comparison. We built a reproducible testbed on Kubernetes and a seeded multi-agent workload generator, and compared the two engines under vendor defaults and with chunked prefill matched. SGLang's configuration is the same in both arms, which makes it an internal control across independently provisioned deployments. Under defaults, vLLM's median time to first token is up to 64x SGLang's. Matching one setting removes 78% of the capacity gap where that gap is largest and 30 to 67% of the latency gap. Near saturation the remaining latency gap reflects queue growth. A fluid queue model driven only by a 4.4% throughput shortfall reproduces it, and shows that such a gap scales with the length of the benchmark run. What survives matching is a tail-latency advantage of 2.4 to 6.4x at equal throughput, consistent with cache-aware ordering of waiting requests. We derive six recommendations for comparing serving engines.

0.32