CS Paper Radar

CacheRoute: Planned Prefix-Affinity Routing for Large-Scale LLM Serving

Huang Cheng

cs.DC cs.LG ·submitted 2026-08-20 06:12 UTC · v1

Abstract

Prefix caching avoids prefill only when a repeated request returns to a server that still holds the prefix KV. Cache-blind balancing disperses that reuse; fixed affinity preserves it but can overload a server. CacheRoute resolves this tradeoff with a periodic routing plan. It admits high-rate keys to a stable warm set and places their assignments by expected load. Hot keys may use more than one destination, although every key in our primary semi-synthetic aggregate uses exactly one. On Llama-3.3-70B in fp8 across 60 H100 GPUs, CacheRoute sustains 176+/-11 QPS at a 3.5-s p99 SLO, 2.3x the strongest of five baselines. Served KV-cache hit rate rises from 64.1+/-1.3% under cache-blind balancing to 93.2+/-0.5%. A second semi-synthetic aggregate and controlled 8B and burst experiments separate the effects of affinity and placement. Two 32B workloads provide the counterexamples: when affinity recovers too little KV work, its residual load skew reduces or erases the improvement. We therefore recommend gating any deployment with a shadow replay rather than enabling affinity from workload statistics alone.

Closest papers

Nearest neighbours by meaning across the whole index.

Cacheable by Design? Training Mixture-of-Experts Routers for Locality Against the Edge Memory-Bandwidth Wall: A Pre-Registered Negative Result with a Systems Measurement Study

cs.AI cs.LG ·2026-08-18 ·Shriniwas Ramesh Suram
code/datahighly cited similarity 0.68
Abstract · Pre-registered negative result plus a systems measurement study. Code, router-telemetry tool (llama-moe-trace), traces, data manifests, and …

Serving a 235B-parameter Mixture-of-Experts (MoE) model on a single 8 GB GPU is bottlenecked not by compute but by memory bandwidth: decode must stream each token's active experts from whichever tier holds them, and on consumer hardware most experts sit on an SSD far slower than RAM. We quantify this bandwidth wall on Qwen3-235B (Q4_K_M, 134 GB): measured decode is 0.44 tok/s warm, matching a bytes-per-token / bandwidth model, while a batching scheme that should amortize one disk sweep instead collapses at batch 32 from paging thrash. We build llama-moe-trace, a zero-surgery router-telemetry tool, and measure routing on Qwen3-30B: adjacent-token expert reuse is 2.0x chance, 95% of traffic uses 52.5% of experts, and an LRU cache of 13.4% of experts serves 66% of requests. We then ask whether cacheability is trainable: we pre-register training of 137M MoE language models with auxiliary locality and domain router losses, under joint criteria on cache-miss reduction and perplexity. The mechanism works (misses down up to 60%; a 99% static-pin hit rate) but every configuration fails the pre-registered <=1% perplexity gate -- miss reduction and quality are tightly coupled. Concurrent StickyMoE reports the same loss as near-free on single-domain sub-25M models; on multi-domain 137M we find the tax real. Our contribution is this pre-registered, stricter-criterion, multi-domain evaluation plus edge-serving measurements. A 340M rung shows the tax does not shrink with scale (it rises slightly). We further show training-free cache-aware rerouting stacks with trained locality -- together ~80% miss reduction at <=3.4% perplexity at both sizes, far cheaper than either alone -- while domain-primed prefetching does not help. All code, traces, and the pre-registration are released.

0.41

Bursts That Outlast Themselves: Persistent Degradation in Prefix-Cached Agent Serving

cs.DC cs.AIcs.LG ·2026-11-10 ·Wen Huang, Jack Liu
similarity 0.68
Abstract · 12 pages, 8 figures

LLM agents drive inference engines with closed-loop sessions whose context grows every turn, and serving them economically depends on prefix caching: a hit costs an incremental prefill of about a thousand tokens, a miss recomputes a 10--40K-token context. We show that this makes prefix-cached agent serving metastable. With an identical base workload, a few minutes of extra arrivals leaves a vLLM server in a degraded regime--a ~10% hit ratio, about half the throughput, and a backlog that grows for the remaining 70 minutes--while its no-burst twin stays healthy (9 of 12 pairs; none in the reverse direction). The regime appears at loads the cache-warm server sustains, is absent without prefix caching, and also appears with Qwen3-32B on SWE-bench agent trace shapes and on SGLang, which tolerates larger triggers. Slower service keeps more sessions in the system, their working set outgrows the KV pool, and every turn becomes a recomputation; a first-order workload-balance condition, calibrated independently, brackets when the regime can drain. Getting out is the harder problem: throttling new admissions recovered 1 of 7 matched collapsed runs, while suspending admitted sessions against a capacity-based limit recovered all of them within minutes. A CPU offload tier delays the collapse but does not prevent it. A budgeter that bounds the resident KV demand of active sessions to the pool, with thresholds that need no per-workload tuning, prevented the failure in every run we tested.

0.15

Range: Decoupling KV-Cache Reuse Granularity from Storage Work

cs.OS ·2026-10-15 ·Dingsen Shi, Jiahao Zhang, Liqiang Lv, Boming Huang, Yanbo Dai +5 more
similarity 0.68
Abstract · 14 pages, 10 figures, 3 tables

LLM serving reuses cached key-value (KV) state to skip prefill, and growing contexts push that state past GPU HBM and CPU DRAM onto NVMe SSDs, placing prefix restore on the critical path of time-to-first-token (TTFT). We find that on a well-configured host-issued path the SSD is not the bottleneck: restoring the same 6 GiB of KV takes 2.1 s as 192 objects but 3.0 s as 6,144 objects, and more under layerwise loading, because every layer of the storage stack - lookup, allocation, I/O submission, GPU delivery, store, index - charges per logical object while the bytes stay the same. This cost grows with the KV footprint: longer contexts, deeper models under layerwise loading, and tensor parallelism each multiply the object count. Prior systems move this per-object work from the CPU to the GPU; the work remains per object. This paper presents Range, a KV-cache storage engine for vLLM and LMCache built on one principle: every cost on the storage path scales with bytes or physical batches, never with logical objects. Range tickets replace per-key lookup and ownership with token metadata and physical leases; byte stripes make the on-media layout independent of reuse granularity; completion-owned GPU transfer banks batch delivery and extraction and release each layer to attention as it lands. Range keeps the kernel cuFile path and changes four lines of vLLM. On a fixed 6 GiB restore, Range's median TTFT stays at 1.79-1.80 s across a 32x range of object counts and under layerwise delivery, within 70 ms of the prefix already being resident in GPU memory, while tuned in-process LMCache rises from 2.12 s to 3.01 s. Range improves on the fastest multiprocess DRAM-bounced path by 0.44 s at coarse granularity while moving no payload through host memory, and holds layerwise reuse at the cost of coarse-grained reuse, where the best stock path takes 2.24 s.

0.21

Placing LLM Lookup Tables by Per-Layer Prefetch Deadlines

cs.DC cs.AIcs.LG ·2026-11-10 ·Wen Huang, Jack Liu
similarity 0.67
Abstract · 15 pages, 5 figures, 10 tables

DeepSeek-V4.1's 203 GB of Engram n-gram tables sit in host DRAM today, taking 190 of the 223 GiB a 4-GPU serving process uses. Row indices depend only on input tokens, so reads can start with each step and overlap earlier layers. V4.1's two Engram layers have windows that differ by 30x (0.3 vs. 9.3 ms). We show that this deadline, together with session reuse and contention on a shared device, decides which tier each table can use and which layers need cache, and we give a model that predicts the resulting slowdown from measured read times. Agent and chat traffic reuse rows within sessions, and static hot sets transfer poorly. We build SlackTier, a table tier for SGLang that issues all lookups at step start. It reads the short-window layer first and splits a small GPU row cache across layers. The path runs inside the decode CUDA graph and is bit-exact with the original gather. Layer 14's table can go to NVMe uncached with no measurable decode cost. With both tables on four NVMe disks, mean time per output token on agent and chat replays rises at most 1.4% over unmodified SGLang, and host memory falls from 212 to 34 GiB. Both tables need no cache when read over RDMA (remote direct memory access) from another node's memory; one copy serves two instances. On a KV-constrained agent workload, using the freed memory as host KV cache at the same memory budget raises median throughput by 36% and cuts median p90 time to first token from 38 to 24 s.

0.25

Calibrate, Then Route: A Measured Study of Learned Request Routing for Disaggregated LLM Serving

cs.AI ·2026-09-14 ·Srikanta Datta Tumkur, Jay Iyer, Mehar Simhadri, Sai Pavan Kumar, Sai Kapil Kumar +1 more
similarity 0.67
Abstract

Disaggregated LLM serving places compute heavy prefill and memory heavy decode on separate GPU pools. Systems such as DistServe, Splitwise, and Mooncake make this separation fast, but routing still determines which instances handle each request. We study a router that estimates the additional completion time on each instance using exact prompt length, predicted output length, post admission KV cache pressure, and SLO class. We develop the policy in a discrete event simulator and validate it on eight NVIDIA A40 GPUs, each running a vLLM engine, with NIXL transferring KV caches between pools. All workloads run at measured saturation. Across three mixed, bursty arrival traces, the calibrated router achieves the highest mean goodput at 0.864, compared with 0.835 to 0.847 for round robin, least loaded, and a length heuristic. It also shows the lowest variance across traces. It beats round robin and the length heuristic on all three traces and least loaded on two. On the third, it trails by 0.003, within run to run noise. Hardware calibration matters: simulator derived constants cost 4.5 goodput points and roughly 40 percent of the tail latency advantage, reducing the scorer to little more than queue counting. Benefits grow with decode pool size and traffic heterogeneity but disappear in pools with three instances, where queue counts are often enough. Under extreme scarcity, greedy cost minimization concentrates requests on the cheapest scored instance, and blind spreading performs better. With calibrated costs, the learned router matches the goodput of round robin using six GPUs instead of seven.

0.44

Building py-kvcache: A Performance Characterization of External KV Caching for vLLM with NVMe SSDs

cs.DC cs.LG ·2026-09-10 ·Joseph Kanichai, Tiziano De Matteis, Animesh Trivedi
code/data similarity 0.66
Abstract

Prefix caching can reduce the time to first token (TTFT) of long-context LLM requests by reusing previously computed key-value (KV) states, but for short prefixes or fast GPUs, recomputation can be faster than loading from an external cache. We characterize this tradeoff in vLLM across GPU, CPU, and NVMe tiers using synthetic workloads, long-context benchmarks, production traces, and find that cache performance depends on transfer granularity, intermediate memory use, and when transfers enter the request schedule, not only on device bandwidth. These findings motivate py-kvcache, a vLLM KV Offload connector with asynchronous direct I/O, bounded shared staging, and scheduler-aware preloading, which starts disk reads while requests are still waiting, overlapping with compute. At 80k tokens, py-kvcache loading from disk is 2.0x faster than LMCache, with preloading contributing 1.34x. With GPU, CPU, and disk caching enabled, it is 1.23x faster than LMCache and within approximately 4% of the native vLLM KV Offload implementation. LongBench and SCBench show that these benefits extend to irregular prefix chains and multi-turn workloads. Bailian trace replays improve TTFT on a weaker GPU, but on an H100 the average request falls below the break-even point and GPU memory alone retains enough prefixes. External KV caching should therefore be treated as a setup specific admission decision. The py-kvcacheimplementation is available at: https://github.com/atlarge-research/py-kvcache.

0.54

When the KV Cache Is Slower Than the GPU: Scaling Remote KV Tiers for Context-Parallel Prefill

cs.DC cs.LG ·2026-10-15 ·Muhammad Ibrahim
similarity 0.66
Abstract · 9 pages, 8 figures, 3 tables

Reusing the attention KV cache across requests is a standard way to cut prefill cost in long-context LLM serving, and production systems increasingly back the per-engine cache with a remote tier shared by every engine. We study such a tier in a disaggregated deployment of GLM-5.3, an FP8 mixture-of-experts model with multi-head latent attention (MLA), on 8xB300 nodes running prefill context parallelism (PCP8). Enabling the remote tier (LMCache with a Valkey store) left median time-to-first-token unchanged but raised the 16k-token p99 from 3.96 s to 17.3 s. Replaying a production request stream on an isolated engine, we find that a remote hit took 0.88 s against 0.31 s to recompute the prompt, and that synchronous loading turned a hit-heavy stream into an unstable queue: p99 83.32 s with the GPUs 7% busy. A two-term cost model explains both: a hit pays off only if the tier delivers more than B* = sR (2.53 GB/s for this model and GPU), and a fixed per-hit engine cost (T0 ~ 0.33 s) means that hits on prompts shorter than about 17k tokens cannot beat recompute at any bandwidth. Guided by the model, we (i) shard the MLA KV store across PCP ranks, with a proof that the existing minimum-over-ranks lookup returns the longest cached prefix and a load protocol that can never desynchronize collectives; (ii) partition the remote tier by rank, one server instance per rank with no coordination, which raises GET bandwidth 6.3x to 10.76 GB/s; (iii) add asynchronous loading to the sharded store; and (iv) fix three client bugs that caused unbounded stalls. On the hit-heavy stream, with 98.5% of prompt tokens served from the remote tier, p99 falls from 83.32 s to 0.67 s. The sharded store raises prefill throughput by 14%, and by 34% together with an upstream kernel fix. All changes are submitted upstream to LMCache.

0.28

Characterizing Predictability-Latency Trade-offs of KV-Cache SSD Offloading in LMCache for LLM Serving Systems

cs.OS ·2026-10-15 ·Ying He, Dingsen Shi, Yanbo Dai, Donger Chen, Harry Fu +3 more
published similarity 0.66
Abstract · 6 pages, 3 figures, 3 tables

KV-cache offload is widely used to stretch GPU memory for LLM serving, but its storage behavior has not been characterized at the block-device level. In this paper, we study LMCache through realworld multi-session workloads that span same/different context x same/different prompt, using over 100 stateless requests per workload. Our comparison is observational rather than factorial: it contrasts two realizable deployment snapshots -- LMCache 0.3.0 with buffered I/O and the kernel page cache, and LMCache 0.3.16 with prefix-aware deduplication and O_DIRECT. Key findings define the paper. First, the legacy stack appears almost read-free at the SSD layer in all four workloads, but a flush_ram experiment shows that this is conditional on page-cache warmth: once the cache is evicted, the same path issues about 1 GB of sequential reads in 683 ms. Second, deduplication delivers a dramatic write reduction only for the exact-repeat workload: one set collapses from 1.62 GB to 11.75 MB of writes, while the other three sets remain in the 2-5 GB range. Third, O_DIRECT converts a hidden and bimodal read cost into an explicit and stable one: on one set, warm TTFT rises from 27 ms to 93 ms because each of the 99 warm requests re-reads the same ~12 MB partial chunk from SSD. The main conclusion is therefore not "newer is better," but a system trade-off: predictability versus average-case latency.

0.18