CS Paper Radar

Automated Estimation of MBIST Area and Test Time in Heterogeneous Memory IPs via Stacked Ensemble Framework

Chee Jin Teoh, Ab Al-Hadi Ab Rahman, Johnny Kee Hui Wong, Premkumar A/L Kesavan Prabagaran, Muhammad Nadzir Marsono, Nuzhat Khan

cs.AR ·submitted 2026-08-20 07:06 UTC · v1

Abstract

Embedded memories occupy a large portion of modern System-on-Chip (SoC) designs, especially in high-performance applications such as artificial intelligence and edge computing. Memory Built-In Self-Test (MBIST) is commonly used to ensure memory reliability, but it introduces additional area and test time overhead. Accurate early estimation of these overheads is important during design planning, yet conventional methods rely on full Register Transfer Level (RTL) synthesis and test pattern generation, which are slow and resource-intensive. This study proposes a supervised learning framework that predicts MBIST area and test time directly from RTL-level design parameters without synthesis. A dataset of 4,470 samples for area and 624 for test time was generated using Synopsys Design Compiler and MINT, an Intel-enhanced MBIST tool. Input features include memory count, word width, address depth, port configuration, and clock domains. For area prediction, the features are processed through polynomial expansion, log transformation, and scaling, followed by a stacked ensemble model using XGBoost, LightGBM, and a Neural Network with Gradient Boosting as the meta-learner. For test time, XGBoost and LightGBM are combined using Ridge Regression, with hyperparameters tuned through a 100-trial Optuna search. The models achieved 90.68% accuracy for area and 96.80% for test time within a +/-10% margin, improving over baseline methods by 8.53% and 48.80% respectively. The results show that this approach enables faster estimation of MBIST costs and supports more efficient design decisions in memory IP development.

Closest papers

Nearest neighbours by meaning across the whole index.

Beacon: LLM Multi-Agent Driven Hardware Design Space Exploration for Heterogeneous Multi-Chiplet Deep Learning Accelerators

cs.AR ·2026-08-31 ·Boyu Li, Zongwei Zhu, Qianyue Cao, Xi Li, Xuehai Zhou
similarity 0.60
Abstract

Heterogeneous multi-chiplet accelerators allow chiplets to be configured independently to better match different operator characteristics and improve inference efficiency. However, heterogeneity makes simulator evaluation expensive, limiting the number of iterations affordable for hardware design space exploration (HW-DSE). Mainstream data-driven methods rely mainly on final metrics and a few predefined states, and require many search iterations to implicitly learn the relationships between input parameters and optimization objectives, making them less effective in this setting. In practice, evaluators also generate detailed reports on execution timelines, resource utilization, memory accesses, and communication behavior. Large language models (LLMs) can combine domain knowledge with these reports to explicitly identify bottleneck locations, degradation causes, and parameter adjustment directions, thereby improving each design decision under limited iteration budgets. Based on this observation, we propose Beacon, a report-driven LLM multi-agent framework for heterogeneous multi-chiplet HW-DSE. Beacon employs hierarchical agents for bottleneck localization, root-cause diagnosis, and hardware candidate generation, together with an Analysis Toolbox and RAG memory for closed-loop search. Under the same limited iteration budget, Beacon reduces the composite latency-energy-monetary-cost objective by 25.1\%--93.5\% compared with random search, Bayesian optimization, and reinforcement learning.

0.16

TADA: Technology Aware DNN Accelerator Performance and Energy Estimator

cs.AR cs.AI ·2026-10-30 ·Tanvi Sharma, Surya Selvam, Anand Raghunathan, Kaushik Roy
published similarity 0.58
Abstract · 7 pages, 7 figures. Accepted at the 32nd Asia and South Pacific Design Automation Conference (ASPDAC '27), Tokyo, Japan, 2027

Deep neural network (DNN) accelerators for edge inference must meet tight energy, latency, and area (EDP) constraints, and their optimal hardware architecture and dataflow configuration is typically identified through design space exploration (DSE). However, on-chip memory technology including cell type, bank organization, and process node, is rarely treated as a first-class citizen in DSE. For example, increasing memory capacity can reduce memory accesses through greater data reuse, but at the cost of higher area and access energy, thereby limiting the compute units budget. Consequently, memory technology can fundamentally shift the optimal accelerator architecture for a given area and EDP budget. Existing machine learning (ML)-based DSE methods require repeating simulation, data generation, and model training for each new memory technology. We present TADA, a memory technology-aware DNN accelerator performance and energy estimator that predicts system latency and energy for a given workload, hardware configuration, and memory technology. TADA is trained on a synthetic dataset that generalizes across memory technologies. The dataset spans current and future technology trends while enforcing physics-based guardrails to preserve realistic area-energy trade-offs. Each memory technology is represented by a technology signature, a vector of read energy, write energy, and storage capacity across a range of areas, provided as input alongside the workload and hardware configuration. Across 21 unseen technology curves spanning SRAM, STTRAM, ReRAM, PCM, FeFET, eDRAM, and CTT, TADA predicts system energy and latency with 1.5-4.4% and 0.7-1.2% mean absolute percentage error, respectively. In three pairwise case studies, it matches the simulator-selected memory technology at 98.7-100% of area budgets, with a mean EDP loss of at most 0.21%, while achieving over 10^4x higher evaluation throughput.

0.38

A Rapid Pipeline for Training and Deploying ML Models on WeBe Band

cs.AI cs.LGcs.PF ·2026-09-24 ·Ehsan Kourkchi, Asmita Asmita, Houman Homayoun, Mahdi Eslamimehr
publishedcode/data similarity 0.57
Abstract

Developing optimized machine-learning algorithms for edge devices with limited computational and memory resources is challenging, time-consuming, and highly dependent on device-specific constraints. In this work, we streamline an edge ML workflow to enable rapid development, optimization, and deployment of machine-learning (ML) models directly on the WeBe Band, a wrist-worn wearable device designed for multimodal physiological data monitoring. The proposed system automatically generates hardware-efficient ML models that can be easily integrated into the WeBe core firmware, supporting AutoML, hardware-aware quantization, and performance profiling to build models that meet desired latency targets while remaining compatible with device memory and power limitations. The proposed framework tightly integrates the open-source Piccolo AI ecosystem with an automated pipeline that generates deployable firmware artifacts, performs hardware-aware model compilation, and supports over-the-air (OTA) deployment. The system supports multiple lightweight model classes, including classical machine-learning algorithms and neural networks, and provides built-in on-device profiling tools to evaluate inference latency and memory footprint under realistic execution conditions. Experimental results demonstrate clear trade-offs between model complexity and deployability on a microcontroller, showing that classical models offer strong real-time performance while lightweight neural networks require careful resource management. Rather than proposing new learning architectures, the current work mainly focuses on system-level automation, deployability, and enabling researchers and developers to rapidly iterate on models and evaluate them directly on target hardware. Although demonstrated on the WeBe Band platform, the workflow is designed to be extensible to other ML-powered edge devices.

0.34

VIPER: Architecture-Aware Performance Modeling for Processing-in-Memory Design-Space Exploration

cs.AR ·2026-08-24 ·Haoran Geng, Tomas Sousa Pereira, Xiaoyang Lu, Xian-He Sun, Michael Niemier +1 more
code/data similarity 0.57
Abstract · 14 pages, 12 figures. Source code available at https://github.com/Notre-Dame-HW-SW-Codesign-Lab/VIPER

Processing-in-Memory (PIM) promises to reduce data movement overhead by executing computation in or near memory, but its realized application speedup remains highly design-dependent. Non-offloadable host execution, host-PIM transfers, limited PIM capacity, and device programming latency can limit end-to-end speedup, making fast early-stage design-space exploration (DSE) essential. However, existing PIM evaluation methods remain limited: circuit- and device-level tools cannot capture these end-to-end PIM performance factors, while cycle-accurate simulation is too slow for iterative DSE. To address this gap, we present VIPER, a unified, lightweight, and architecture-aware performance evaluation framework for PIM DSE. VIPER profiles host execution once and combines the measured host behavior with a PIM-aware analytical engine that sweeps PIM-side parameters across candidate designs. It supports both Processing Near Memory (PNM) and Processing Using Memory (PUM) under task-offloading and data-triggered execution by capturing host-PIM transfer, array access, in-memory computation, device programming latency, and capacity-induced partitioning, providing rapid architecture-aware performance estimates for iterative DSE without repeated cycle-accurate simulation. We validate VIPER against a commercial UPMEM system and more than 400 cycle-accurate gem5 configurations. VIPER predicts the UPMEM offloading decision and break-even region a priori, and, with a refined transfer model, captures the measured peak-and-rolloff behavior with 12\% mean speedup error across the DPU sweep (6\% up to the 256-DPU peak). Against gem5, VIPER achieves less than 10\% error while reducing evaluation time from hours to under one minute. Case studies of UPMEM, ReRAM/FeFET crossbars, and IMCRYPTO show that architecture-aware DSE reveals key performance trade-offs that device-level evaluation misses.

0.24

MemX: Memory-Aware Automatic Parallelism for Cross-Vendor Heterogeneous GPU Training

cs.DC ·2026-10-30 ·Lin Meng, Yuzhong Sun, Jie Zhu
similarity 0.57
Abstract · 18 pages, 10 figures

Cross-vendor heterogeneous GPU clusters are increasingly used for large-scale model training. However, their GPUs differ substantially in compute power, memory capacity, and interconnect characteristics. Existing automatic parallelism training systems usually minimize iteration time while treating memory as a hard constraint, almost failing in resolving the compute--memory asymmetry of cross-vendor clusters regardless correlation between memory and throughput. In this paper, we present MemX, a new memory-aware automatic parallelism system that jointly optimizes iteration time, peak memory usage, and cross-GPU memory balance. MemX consists of a weighted-product objective function, heterogeneous recomputation strategies, a minimal-set profiler, interpolation-based data augmentation, a dual-output XGBoost predictor, and a hash-signature prediction cache, in order to accelerate search of large-scale auto-parallel best configurations at lower cost. We implement MemX on Megatron-LM and evaluate it against four automatic parallelism baselines on two heterogeneous clusters. MemX achieves the lowest prediction Mean Absolute Percentage Error (MAPE) of 12.17% and is the only method that identifies the real Top-1 configuration under both time-based and memory-balance rankings. In terms of search cost and search space, MemX searches 31,240 configurations in 26.5 seconds, while an end-to-end profiling baseline is extrapolated to require about 17 days at the same scale. The simulation study that extends the measured 20-GPU data to 40-GPU and 60-GPU clusters further illustrates the effectiveness of MemX at larger scales.

0.22

IronLLM: Forging Compact Edge-Native Language Models for Real-Time Embodied Intelligence

cs.AI ·2026-09-29 ·Changdi Yang, Fengquan Jiao, Haochih Lin, Haoran Yang, Jing Xiao +12 more
similarity 0.56
Abstract · Technical report

We present IronLLM-0.6B, a 654M-parameter language model designed for efficient on-device inference. IronLLM-0.6B combines a hybrid attention architecture with X-MTP, a lightweight shared-KV multi-token prediction design that eliminates per-depth KV-cache replay and employs a lightweight verification head for rollback-free drafting, achieving a 1.48x decoding speedup. The model is pretrained on approximately 6.2 trillion tokens using a quality-oriented data pipeline and is further post-trained with Multi-Domain On-Policy Distillation to integrate capabilities from domain-specialized teachers. To better meet the low-latency requirements of on-device scenarios, IronLLM-0.6B adopts an Instruct-Only design. Evaluations show that IronLLM-0.6B achieves competitive performance relative to larger models such as Qwen3.5-0.8B and MiniCPM5-1B, while producing more concise responses on many tasks. We further present IronLLM-0.6B-Light, which replaces RMSNorm with Dynamic Tanh and simplifies several computationally expensive components to improve inference and quantization efficiency. Together, the IronLLM models provide an effective performance-efficiency trade-off for resource-constrained deployment.

0.17

Integration, Enhancements and Evaluation of Memory Simulators

cs.AR ·2026-10-11 ·Pouya Esmaili-Dokht, Arash Yadegari, Victor Xirau, Julian Pavon, Hamid Sarbazi-Azad +3 more
publishedcode/datahot direction similarity 0.56
Abstract · accepted to IISWC 2026

Currently, there is no common methodology or set of practices for evaluating memory-system performance in integrated simulation infrastructures. As a result, studies adopt different evaluation approaches, which can lead to conflicting conclusions even for the same simulation infrastructure. We propose a validation methodology that evaluates memory-system performance from three complementary views: the memory simulator, the CPU--memory interface and the simulated application. We use these views to detect, understand and correct memory-simulation inaccuracies arising from simulator integration and simplified modeling of microarchitectural features. The methodology reveals that the application's perception of memory performance can become effectively decoupled from the detailed memory simulation. Most importantly, we identify and correct a fundamental memory-model mismatch between delayed-response cycle-accurate memory simulators and ZSim, a representative parallel CPU simulator. We demonstrate the broader applicability of these enhancements by applying them to ZSim integrations with Ramulator 2, DRAMsim3 and DRAMSys 4, covering all major public cycle-accurate memory simulators. After the corrections and enhancements, all integrations reproduce the main bandwidth--latency trends and key characteristics of the actual system. Across the evaluated simulators, STREAM bandwidth differs from actual-hardware measurements by less than 5% in most experiments, while pointer-chase latency remains 15--18% lower than on actual hardware. All simulator enhancements are released as open source.

0.70

Automated Pre-Silicon Verification of High-Speed DDR5 and LPDDR5/6 Memory Controllers: Closed-Loop Timing, Mode Register, and PHY Synchronization in UVM

cs.AR ·2026-09-28 ·Manan Patel, Anirban Majumder
similarity 0.56
Abstract · 4 pages, 2 figures, 1 table, IEEE two-column format

External memory interfaces (such as LPDDR5/4 and DDR5) are essential components of modern mobile, cloud, and enterprise computing systems. While memory manufacturers focus on physical DRAM die development, the vast majority of semiconductor firms design custom application ASICs that require a dedicated Memory Controller to interface with these standardized external memories. Consequently, pre-silicon design verification of the Memory Controller RTL -- acting as the Device Under Test (DUT) against a third-party DRAM Verification IP (VIP) -- is a ubiquitous and critical challenge across the global semiconductor industry. This article presents an automated, pre-silicon configuration and closed-loop initialization framework for Memory Controller verification. The proposed solution parses JEDEC timing and configuration parameters directly from the DRAM VIP's database files (such as Denali SOMA files) to configure the Memory Controller DUT's registers, while a custom Mode Register Register Abstraction Layer (MR-RAL) tracks volatile DRAM VIP states in real-time. Furthermore, a dynamic, re-compilation-free PHY initialization flow randomizes interface parameters directly in the testbench, executes on-the-fly configuration generation via system calls, and parses the resulting register write sequences at runtime. By integrating these automated methodologies into pre-silicon verification flows, engineers can eliminate setup overhead, prevent false protocol violations, and enable comprehensive randomized testing of complex PHY and Memory Controller configurations.

0.24