CS Paper Radar

Topology of a Smile: Persistent Homology in Dental Imaging

Leon Dahlmeier, Sara Kališnik, Albert Mehl, Bastian Rieck

cs.CV math.AT ·submitted 2026-08-14 18:22 UTC · v1

Abstract

CBCT (Cone Beam Computed Tomography) scans provide detailed three-dimensional images, widely used in dentistry for diagnostic and treatment planning tasks. While invaluable, analyzing and documenting these scans is labor-intensive, prompting efforts to automate key steps like the classification and segmentation of anatomical structures to identify tooth types and associated pathologies. In this article, we propose an approach to automation that leverages persistent homology, a framework from topological data analysis that studies the shape of data by identifying features like connected components, holes, and voids across multiple scales. Persistent homology, together with a support vector machine, allows us to classify teeth in a CBCT scan and to perform diagnostics. Our method advances the state of the art, reaching average accuracy scores of 97.67% for tooth-labeling and 96.77% for diagnostic tasks, outperforming a CNN trained on the same data with accuracy of 70.27% and 86.67%, respectively.

Closest papers

Nearest neighbours by meaning across the whole index.

Morphological Decoupling-Based Skeletal Classification for Clinical Assessment of Malocclusion

eess.IV cs.CV ·2026-09-09 ·Zhichun Jin, Zhicheng He, Hao Xu, Dongyang Li, Lin Wang +2 more
published similarity 0.68
Abstract · Accepted by Biocybernetics and Biomedical Engineering

Malocclusion skeletal grading is a fundamental task in orthodontics, critical for diagnosis and treatment planning. Traditionally, cone-beam computed tomography (CBCT) is used for visual measurement, and the reconstructed lateral cephalograms are handed over to expert dentists for diagnosis. However, manual review is time-consuming, labor-intensive, and subject to inter-operator variability. Therefore, an automatic CBCT-based system is needed for reliable malocclusion skeletal grading. In this case, we develop TeethGNN, a novel graph-based framework designed to combine CBCT image features with morphological information for accurate and efficient malocclusion grading. TeethGNN utilizes a decoupled learnable decoder to directly predict key morphological indicators from CBCT images, eliminating the need for manual measurements. These morphological features are then fused with image features using a graph neural network (GNN), which effectively models the relationships between the modalities. To further enhance robustness and calibration, we introduce a collaborative calibration strategy. This strategy combines multi-scale graph adversarial perturbation for explicit calibration and nonlinear topological graph calibration for implicit confidence adjustment. Extensive experiments and ablation studies on our collected clinical dataset demonstrate that our malocclusion measurement system achieves 77.08\% in accuracy and 89.61\% in AUC, outperforming the compared state-of-the-art methods. These results validate the effectiveness of graph-based multimodal fusion and collaborative calibration in improving malocclusion grading performance. Our system shows strong potential for advancing computer-aided orthodontic diagnosis, providing an accurate and reliable solution for vision-based clinical measurement and diagnosis.

0.36

CarDiff: Anatomically Aware Dental Caries Synthesis using Diffusion

cs.CV cs.LG ·2026-10-13 ·Sanyam Jain, Bruna Neves de Freitas, Alexandros Iosifidis, Ruben Pauwels
code/data similarity 0.62
Abstract

Synthetic medical image generation can help address limited annotated data in dental imaging, particularly for under-represented caries classes. In this work, we present CarDiff, a semi-supervised framework for dental caries synthesis in panoramic radiographs. The method combines paired mask-image learning with self-supervised generation from augmented masks, while incorporating anatomy-aware conditioning between lesion regions and surrounding structures. Semantic consistency is enforced through segmentation-guided supervision and adversarial anatomical alignment. Experiments on the MLUA-DC1000 dataset show that CarDiff achieves improved synthesis quality compared with existing semantic synthesis baselines, obtaining the best Fréchet Inception Distance (FID) (90.76) and Learned Perceptual Image Patch Similarity (LPIPS) (0.48) scores among evaluated methods. We further assess the generated radiographs for downstream segmentation augmentation across seven architectures. Using a 5x augmented training set improves average Dice score by up to 6.5%, with larger gains observed for medium and combined lesion classes. These results suggest that anatomically consistent diffusion synthesis may be useful for dental radiograph augmentation under limited supervision. The code is available at https://github.com/s4nyam/CarDiff.

0.32

Detection is solved, delineation is not: what governs tooth segmentation on panoramic radiographs

cs.CV cs.LG ·2026-09-18 ·Muhammad Rehan, Moaz Amjad, Syed Danial Ahmed, Mariam Adnan, Haider Ali
code/data similarity 0.62
Abstract · 15 pages, 6 figures, 5 tables. Code: https://github.com/Rehan000/opg-tooth-segmentation

Automatic tooth segmentation and FDI numbering on panoramic radiographs underpins computer-assisted dental diagnosis, yet which factors govern performance remains unclear. We assemble a corpus of 1,422 panoramic radiographs containing 42,142 expert-delineated tooth polygons across the 32-class FDI taxonomy, annotated by 30 dental practitioners and independently reviewed by two others, and use it to isolate input resolution, architecture and anatomical priors under a single evaluation protocol. First, resolution dominates: across a controlled 640/1024/1280 ablation, mask mAP50-95 rises 0.656 -> 0.710 -> 0.717 while mAP50 stays flat at ~0.982. Both gains are significant under a paired bootstrap over images (p < 0.001, p = 0.024); neither mAP50 change is distinguishable from zero. Added resolution buys boundary precision, not detection. Second, architecture is nearly irrelevant in-domain: a query-based transformer with 2.1x the parameters is statistically equivalent to a one-stage detector (95% CI [-0.0064, +0.0064]), only marginally better under domain shift, 5.5x slower on CPU and not executable under standard ONNX runtimes. Third, three targeted interventions fail: a LoRA-adapted self-supervised encoder underperforms, a promptable foundation segmenter degrades masks by 39%, and globally optimal anatomical label assignment yields +0.0007 despite correcting a constraint violated in 40% of out-of-domain predictions. Zero-shot transfer to an independent multi-centre cohort, verified overlap-free, costs 62% of mask mAP50-95 but only 18% of mAP50, reproducing the dissociation. Decomposing masks along the tooth axis localises the residual error to the apical third. Boundary precision is therefore the binding constraint, and effort is better directed at resolution and acquisition diversity than at architectural novelty.

0.36

B-Spline Embedded Structure Learning for 3D Tooth Segmentation

cs.CV ·2026-08-18 ·Xianghan Wei, Jianwen Lou, Zhiguo Lu, Hairong Jin, Haihua Zhu
benchmark similarity 0.61
Abstract

Accurate 3D tooth segmentation forms the cornerstone of digital dentistry, yet it remains a formidable challenge due to the inherent intricacy of real-world dentitions, such as crowding, misaligned teeth and high morphological similarity between adjacent teeth. To resolve this, we present B-Spline Embedded Structure Learning, a novel framework that distills the inherent sequential arrangement of teeth into a continuous structural constraint to regularize representation space. Our approach parameterizes the global dental topology by fitting a parametric B-spline trajectory to tooth centers, assigning each point a continuous structural embedding that forces the shared backbone to capture global arch organization. To fully exploit these embedded priors, we introduce a Structure-Aware Dynamic Classifier (SADC) to substitute rigid static templates with adaptive, case-calibrated decision boundaries. SADC regularizes dynamic prototype pooling via a localized Gaussian proximity gate and contextually co-evolves them through an attention block modeling spatial relations and bilateral symmetries across teeth. Extensive evaluations on the 3DTeethSeg22 benchmark demonstrate that our method establishes a new state-of-the-art accuracy with exceptional structural robustness and efficiency in computational overhead, markedly enhancing the model's capacity to handle complex dental configurations.

0.40

Sparse cubical complexes for efficient topology-preservation in image data

cs.CV cs.CGcs.LG ·2026-09-29 ·Alexander H. Berger, Marco Fontana, Daniel Rueckert, Johannes C. Paetzold, Laurin Lux +1 more
positionhot direction similarity 0.61
Abstract

Persistent homology (PH) is a frequently used tool for extracting and preserving topological information from image data, particularly in image segmentation, where preservation of topological structures is important. However, despite its general applicability across dimensionality, domains, and target structures, the runtime cost of PH-based methods often makes their practical use infeasible. In this work, we argue that this runtime cost is largely driven by processing information that is unimportant for downstream application (e.g. as optimization objective). We propose sparse cubical filtrations as an alternative foundation for PH computation, reducing subsequent computational costs by factors of up to 100 on real datasets. We show close agreement with the optimization signal of the dense counterpart and empirically evaluate our solution's effectiveness as an optimization objective in realistic training regimes where other PH-based objectives can practically not operate (i.e., 3D data with large patch sizes). We show how our solution improves topological accuracy by up to 80\% across six diverse datasets while maintaining pixel- and region-based accuracy.

0.38

Teeth2Point: A Two-Stage Dental CBCT ROI-to-Point Segmentation Framework

cs.CV ·2026-08-19 ·Qi Ma, Shipra Jain, Niko Benjamin Huber, Ender Konukoglu
similarity 0.60
Abstract

Modern deep learning architectures have demonstrated strong performance in dental CBCT segmentation. One remaining crucial challenge is accurate tooth labeling in cases with missing or malpositioned teeth, which are highly relevant for dental practice. Transformer-based architectures should in theory be able to resolve such ambiguities using global anatomical context. However, due to the high resolution of CBCT volumes and the wide spatial distribution of teeth within volumes, dense patch-based volumetric processing faces an inherent trade-off. Computational costs limit the number of patches that can be used in self-attention and thus, one can either increase the extent of the context captured in self-attention or capture fine-grained structural details by using small patches, but not both. In this work, we present Teeth2Point, an efficient point-based transformer framework for dental CBCT semantic segmentation that can avoid this trade-off. Teeth2Point first localizes volumetric regions of interest (ROIs) surrounding teeth using a convolutional model, then converts ROIs into point tokens using adaptive sampling. A transformer model predicts accurate segmentations using the point tokens, which allow capturing global context while retaining high resolution. The transformer is first pretrained using self-supervised learning (SSL), in the style of DINO but using domain-specific augmentation strategies, followed by supervised finetuning. The SSL pretraining, which includes random token masking, provides robustness to complex anatomical variations. Compared with the strongest two-stage baseline, Teeth2Point improves abnormal-case performance by 1.44 DSC points on average across four datasets; relative to the first-stage nnU-Net, the gain is 1.9 points.

0.32

OcTreeMamba: Topology-Aware Mamba for 3D Medical Segmentation via Octree Sparsification

cs.CV ·2026-11-05 ·Kaixiang Mai, Jiaqi Yu, Yuzhu Ji, Yiqun Zhang, Zhijie Wang +2 more
publishedbenchmarkcode/data similarity 0.57
Abstract · 8 pages, 5 figures, accepted by IEEE BIBM 2026

Accurate segmentation of 3D anatomical structures is crucial to medical image analysis. Recently, Mamba-based approaches have achieved promising segmentation performance in capturing long-range dependencies with linear-time computational complexity. However, heuristic selective scanning strategies inherently disrupt the intrinsic spatial hierarchy and increase computational redundancy, ignoring the inherent sparsity of 3D anatomical structures. To this end, we propose OcTreeMamba, a hierarchical framework that incorporates Octree structures into SSM, achieving 3D topology-aware long-range context feature propagation and integration. Specifically, a Structure Learner performs anatomy-adaptive structured sparsification through hierarchical gating and Gumbel-Softmax sampling, enabling differentiable selection of anatomical regions. The selected regions are subsequently organized by a Dynamic Octree Builder into a multi-level topology that preserves their hierarchical connectivity. Based on the constructed Octree, a bidirectional Tree-SSM propagates and integrates contextual features along connectivity-aware leaf--parent--root and root--parent--leaf trajectories. Extensive experiments on four benchmark datasets show that our proposed OcTreeMamba achieves competitive performance \wrt topological continuity and computational efficiency, particularly for recovering the complex structure on vascular datasets. The code is available at https://github.com/MikeMak123/OcTreeMamba.

0.47

Patient-Level, Leakage-Aware Deep Learning for Cross-Center Periapical Radiograph Classification

cs.CV ·2026-09-13 ·Md Jubaer Rahman, Ulas Bagci
benchmark similarity 0.57
Abstract · Submitted to the 9th International Conference on Signal Processing and Information Security (ICSPIS 2026)

Dental caries and endodontic disease are among the most common health conditions worldwide, and intraoral periapical radiographs are central to their detection, treatment planning, and follow-up. Automated tooth-level classification of these images, however, lacks reproducible benchmarks, is often evaluated with image-level splits that leak patients between training and test, and is rarely validated across clinics. This paper presents the first patient-level, leakage-aware classification benchmark for single-tooth intraoral periapical radiographs on the DentIRO dataset, which comprises 5,300 images from 3,243 patients across two clinics and four classes: Healthy, Caries, Crowned, and Root Canal. Five transfer-learning models are compared with patient-grouped stratified cross-validation, so that every patient remains within a single fold. DenseNet121 gave the strongest and most stable result at a mean macro-F1 of 0.9787, while the four ImageNet-initialized backbones performed comparably. A controlled comparison on a fixed architecture showed that chest-radiograph pretraining transferred less effectively than ImageNet initialization. Bidirectional cross-center validation produced a small average generalization gap of 0.0077, and Grad-CAM confirmed that predictions rely on clinically meaningful tooth regions rather than acquisition artifacts. The benchmark offers a rigorous and reproducible baseline for intraoral radiograph classification.

0.29