CS Paper Radar

B-Spline Embedded Structure Learning for 3D Tooth Segmentation

Xianghan Wei, Jianwen Lou, Zhiguo Lu, Hairong Jin, Haihua Zhu

cs.CV ·submitted 2026-08-18 02:43 UTC · v1
benchmark

Abstract

Accurate 3D tooth segmentation forms the cornerstone of digital dentistry, yet it remains a formidable challenge due to the inherent intricacy of real-world dentitions, such as crowding, misaligned teeth and high morphological similarity between adjacent teeth. To resolve this, we present B-Spline Embedded Structure Learning, a novel framework that distills the inherent sequential arrangement of teeth into a continuous structural constraint to regularize representation space. Our approach parameterizes the global dental topology by fitting a parametric B-spline trajectory to tooth centers, assigning each point a continuous structural embedding that forces the shared backbone to capture global arch organization. To fully exploit these embedded priors, we introduce a Structure-Aware Dynamic Classifier (SADC) to substitute rigid static templates with adaptive, case-calibrated decision boundaries. SADC regularizes dynamic prototype pooling via a localized Gaussian proximity gate and contextually co-evolves them through an attention block modeling spatial relations and bilateral symmetries across teeth. Extensive evaluations on the 3DTeethSeg22 benchmark demonstrate that our method establishes a new state-of-the-art accuracy with exceptional structural robustness and efficiency in computational overhead, markedly enhancing the model's capacity to handle complex dental configurations.

Closest papers

Nearest neighbours by meaning across the whole index.

OcTreeMamba: Topology-Aware Mamba for 3D Medical Segmentation via Octree Sparsification

cs.CV ·2026-11-05 ·Kaixiang Mai, Jiaqi Yu, Yuzhu Ji, Yiqun Zhang, Zhijie Wang +2 more
publishedbenchmarkcode/data similarity 0.63
Abstract · 8 pages, 5 figures, accepted by IEEE BIBM 2026

Accurate segmentation of 3D anatomical structures is crucial to medical image analysis. Recently, Mamba-based approaches have achieved promising segmentation performance in capturing long-range dependencies with linear-time computational complexity. However, heuristic selective scanning strategies inherently disrupt the intrinsic spatial hierarchy and increase computational redundancy, ignoring the inherent sparsity of 3D anatomical structures. To this end, we propose OcTreeMamba, a hierarchical framework that incorporates Octree structures into SSM, achieving 3D topology-aware long-range context feature propagation and integration. Specifically, a Structure Learner performs anatomy-adaptive structured sparsification through hierarchical gating and Gumbel-Softmax sampling, enabling differentiable selection of anatomical regions. The selected regions are subsequently organized by a Dynamic Octree Builder into a multi-level topology that preserves their hierarchical connectivity. Based on the constructed Octree, a bidirectional Tree-SSM propagates and integrates contextual features along connectivity-aware leaf--parent--root and root--parent--leaf trajectories. Extensive experiments on four benchmark datasets show that our proposed OcTreeMamba achieves competitive performance \wrt topological continuity and computational efficiency, particularly for recovering the complex structure on vascular datasets. The code is available at https://github.com/MikeMak123/OcTreeMamba.

0.47

Teeth2Point: A Two-Stage Dental CBCT ROI-to-Point Segmentation Framework

cs.CV ·2026-08-19 ·Qi Ma, Shipra Jain, Niko Benjamin Huber, Ender Konukoglu
similarity 0.61
Abstract

Modern deep learning architectures have demonstrated strong performance in dental CBCT segmentation. One remaining crucial challenge is accurate tooth labeling in cases with missing or malpositioned teeth, which are highly relevant for dental practice. Transformer-based architectures should in theory be able to resolve such ambiguities using global anatomical context. However, due to the high resolution of CBCT volumes and the wide spatial distribution of teeth within volumes, dense patch-based volumetric processing faces an inherent trade-off. Computational costs limit the number of patches that can be used in self-attention and thus, one can either increase the extent of the context captured in self-attention or capture fine-grained structural details by using small patches, but not both. In this work, we present Teeth2Point, an efficient point-based transformer framework for dental CBCT semantic segmentation that can avoid this trade-off. Teeth2Point first localizes volumetric regions of interest (ROIs) surrounding teeth using a convolutional model, then converts ROIs into point tokens using adaptive sampling. A transformer model predicts accurate segmentations using the point tokens, which allow capturing global context while retaining high resolution. The transformer is first pretrained using self-supervised learning (SSL), in the style of DINO but using domain-specific augmentation strategies, followed by supervised finetuning. The SSL pretraining, which includes random token masking, provides robustness to complex anatomical variations. Compared with the strongest two-stage baseline, Teeth2Point improves abnormal-case performance by 1.44 DSC points on average across four datasets; relative to the first-stage nnU-Net, the gain is 1.9 points.

0.32

Topology of a Smile: Persistent Homology in Dental Imaging

cs.CV math.AT ·2026-08-14 ·Leon Dahlmeier, Sara Kališnik, Albert Mehl, Bastian Rieck
similarity 0.61
Abstract

CBCT (Cone Beam Computed Tomography) scans provide detailed three-dimensional images, widely used in dentistry for diagnostic and treatment planning tasks. While invaluable, analyzing and documenting these scans is labor-intensive, prompting efforts to automate key steps like the classification and segmentation of anatomical structures to identify tooth types and associated pathologies. In this article, we propose an approach to automation that leverages persistent homology, a framework from topological data analysis that studies the shape of data by identifying features like connected components, holes, and voids across multiple scales. Persistent homology, together with a support vector machine, allows us to classify teeth in a CBCT scan and to perform diagnostics. Our method advances the state of the art, reaching average accuracy scores of 97.67% for tooth-labeling and 96.77% for diagnostic tasks, outperforming a CNN trained on the same data with accuracy of 70.27% and 86.67%, respectively.

0.04

Flow Matching Meets 3D Curvilinear Structure Segmentation in Medical Imaging

cs.CV cs.LGq-bio.QM ·2026-08-20 ·Sidi Mohamed Sid'El Moctar, Nicolas Vitry, Hélène Bouvrais
published similarity 0.59
Abstract · International Workshop on Machine Learning in Medical Imaging (MLMI 2026) @ MICCAI

Segmentation of curvilinear anatomical structures in 3D medical images remains challenging due to complex topology, severe class imbalance, weak contrast, and large variations in structure morphology. While deep learning approaches for 3D curvilinear segmentation have been proposed, they are often tailored to specific anatomies or modalities, limiting generalization across clinical settings and leaving room for improvement. Recent generative models have shown the benefits of iterative prediction for structured segmentation tasks, yet diffusion-based methods suffer from computationally expensive sampling, hindering their use on high-resolution 3D volumes. We present 3D-CurvSegFlow, a flow matching-based model for 3D curvilinear structure segmentation. The model learns a continuous transformation from a simple source distribution to the target vascular representation, enabling progressive refinement of complex curvilinear geometries with efficient inference. We evaluate our method on Three public challenging datasets covering distinct anatomies and modalities: portal vein, cerebral vessel, and coronary arteries. Using a common architecture and training strategy across all tasks, our method outperforms general-purpose and vessel-specific approaches, with strong preservation of thin branches and vascular continuity. This work not only advances the state-of-the-art in 3D curvilinear segmentation but also opens new avenues for efficient, generalizable, and clinically applicable methods in medical image analysis.

0.23

Structure-aware Keypoint Localization for Videofluoroscopic Swallowing Study

cs.CV ·2026-10-06 ·Kai Zhou, Chuanshen Chen, Runhao Zeng, Meng Dai, Yifan Yang +4 more
publisheddatasetcode/data similarity 0.59
Abstract · Accepted by ICME 2026 Oral

Videofluoroscopic Swallowing Study (VFSS) is one of the gold standard for diagnosing swallowing disorders, providing dynamic X-ray imaging of the swallowing process. Automated kinematic analysis in VFSS relies fundamentally on precise anatomical keypoint localization. However, existing studies focus on limited keypoints (e.g., cervical vertebrae or the hyoid) and overlook critical regions such as the soft palate, while annotating only active swallowing segments and ignoring abundant non-swallowing data, resulting in poor data efficiency. Moreover, leveraging this unlabeled data via standard semi-supervised learning is suboptimal, as generic methods are prone to spatial bias. In medical X-rays with fixed layouts, models tend to memorize absolute coordinates rather than understanding anatomical structures. To tackle these challenges, we introduce VFSSKep, a novel dataset that extends annotations to the soft palate and incorporates large-scale unlabeled data. We further propose S$^3$KL, a Structure-aware Semi-Supervised Keypoint Localization framework designed to overcome spatial bias. It integrates a Structure-Aware Learning strategy to extract high-resolution structural cues for structure-aware representation learning, and a Structural Representation Consistency Learning strategy with block shuffling to enforce invariant structural recognition. Experiments show our method achieves state-of-the-art semi-supervised performance, even with unlabeled and 25% labeled data surpassing fully supervised learning with 100% labeled data. Code and data will be made publicly available at: https://github.com/kaai520/S3KL.

0.42

Morphological Decoupling-Based Skeletal Classification for Clinical Assessment of Malocclusion

eess.IV cs.CV ·2026-09-09 ·Zhichun Jin, Zhicheng He, Hao Xu, Dongyang Li, Lin Wang +2 more
published similarity 0.58
Abstract · Accepted by Biocybernetics and Biomedical Engineering

Malocclusion skeletal grading is a fundamental task in orthodontics, critical for diagnosis and treatment planning. Traditionally, cone-beam computed tomography (CBCT) is used for visual measurement, and the reconstructed lateral cephalograms are handed over to expert dentists for diagnosis. However, manual review is time-consuming, labor-intensive, and subject to inter-operator variability. Therefore, an automatic CBCT-based system is needed for reliable malocclusion skeletal grading. In this case, we develop TeethGNN, a novel graph-based framework designed to combine CBCT image features with morphological information for accurate and efficient malocclusion grading. TeethGNN utilizes a decoupled learnable decoder to directly predict key morphological indicators from CBCT images, eliminating the need for manual measurements. These morphological features are then fused with image features using a graph neural network (GNN), which effectively models the relationships between the modalities. To further enhance robustness and calibration, we introduce a collaborative calibration strategy. This strategy combines multi-scale graph adversarial perturbation for explicit calibration and nonlinear topological graph calibration for implicit confidence adjustment. Extensive experiments and ablation studies on our collected clinical dataset demonstrate that our malocclusion measurement system achieves 77.08\% in accuracy and 89.61\% in AUC, outperforming the compared state-of-the-art methods. These results validate the effectiveness of graph-based multimodal fusion and collaborative calibration in improving malocclusion grading performance. Our system shows strong potential for advancing computer-aided orthodontic diagnosis, providing an accurate and reliable solution for vision-based clinical measurement and diagnosis.

0.36

TMAL: Topology-preserving Multi-offset Affinity Learning for Curvilinear Structure Segmentation

cs.CV physics.med-ph ·2026-11-10 ·Suho Han, Soungsill Park, Kanghyun Ryu, Yoseob Han
code/datahot direction similarity 0.58
Abstract · 15 pages, 11 figures, submitted to WACV 2027

Curvilinear structures such as retinal vessels and surface cracks need both pixel-level accuracy and structural continuity. Pixel-wise supervision does not model the connections between pixels, and topology-based losses still produce ordinary masks. Connectivity-based methods predict these connections directly, but they use binary connectivity targets over a fixed local range. Such labels give the same value to thin segments and to thick regions, and they cannot describe connections at larger offsets. To address these limitations, we propose Topology-preserving Multi-offset Affinity Learning (TMAL). TMAL uses soft affinities that emphasize thin regions near the boundary, and it predicts directional affinities at several offsets to reach further. It then combines these affinities with weights that come from the decoder features, so local continuity and wider context are used together. An auxiliary segmentation branch adds region-level supervision and keeps the overlap accuracy high. On the retinal vessel dataset DRIVE and the crack inspection dataset DeepCrack, TMAL reaches the highest Dice, IoU, and clDice scores, and it greatly reduces the connected-component error $Δβ_0$. Code is available at https://github.com/suho-han/TMAL.

0.43

A Real-World CAD Segmentation Benchmark: Comparing Rule-Based and Learning-Based Approaches through Hole Detection

cs.CV ·2026-10-09 ·Kai Schütte, Edgar Heinert, Matthias Rottmann
benchmark similarity 0.56
Abstract

CAD segmentation datasets are predominantly synthetic or automatically labelled, leaving it unclear how well existing methods transfer to real-world engineering tasks. Fastener-relevant hole detection represents one such task, requiring human annotation and exhibiting greater geometric complexity than commonly used benchmarks. We address this gap through three main contributions. First, we develop two task-specific rule-based methods, one graph-wire-search and one multi-view based, and complement them with a human-annotated benchmark dataset derived from engineering CAD data that also enables training of UV-Net and AAGNet, representative learning-based approaches for B-Rep segmentation. Second, we conduct an extensive experimental study including parameter optimisation, evaluation on our benchmark dataset, cross-domain generalisation on a synthetic dataset, and an assessment of the feasibility of the approaches at varying dataset sizes and IoU thresholds. Third, we provide evidence-based insights into the strengths and limitations of different approaches: rule-based methods generalise well without training data, with the graph-wire-search method favouring recall and the multi-view method favouring precision, whereas learning-based methods achieve strong performance with sufficient annotations but exhibit reduced robustness under domain shift. These findings highlight trade-offs between data requirements, and robustness, and provide guidance not only for hole detection, but more broadly for real-world CAD segmentation tasks.

0.14