CS Paper Radar

The Setting of IMU Parameters in Kalman Filtering-based Information Fusion

Qiang Hu, Yanhua Zou, Shuaiyi Huo, Haibo Ge, Wei Ouyang

cs.RO eess.SY ·submitted 2026-08-17 15:13 UTC · v2

Abstract

The setting or tuning of specifications for the inertial measurement unit (IMU) is tricky in sensor fusion. The underneath conundrum is caused by the fact that the working condition of IMU is more complex than the stationary calibration scenario. Since the noises and biases instabilities calibrated under static condition cannot accommodate other cases, the effective tuning of IMU parameters largely hinges on the experience or profound understanding of the system. In the current work, the setting method of IMU parameters based on Allan variance calibration is delved into within the Kalman filtering framework. Specifically, the relationship between the power sepctral density and Allan variance is leveraged in formulating the process uncertainty in continuous-time filtering. Three typical IMU-based sensor fusion systems, including INS/GNSS integration, LiDAR-inertial odometry, and visual-inertial odometry are considered to show the feasibility and effectiveness of this parameter setting process.

Comment
2026 International Conference on Guidance, Navigation and Control

Closest papers

Nearest neighbours by meaning across the whole index.

Accuracy Evaluation of INS/ZUPT Filtering Methods Based on Different Geometric Error Definitions

cs.RO ·2026-09-25 ·Wei Ouyang, Jiale Han, Yarong Luo, Maoran Zhu
similarity 0.65
Abstract

Geometric filters have recently been introduced to improve the accuracy and consistency of inertial-based integrated navigation systems. Error states were defined through specific group operations, introducing state correlations in error definition, which were lacked in the additive error used by a conventional indirect Kalman filter. The desirable consistent filtering models can be obtained based on specific geometric errors. For zero-velocity measurements expressed in the reference frame, this paper derives left-error process and measurement models from invariant filtering, two-frame-group filtering, and equivariant filtering. Importantly, a new group operation is introduced for the left tangent-group equivariant error. The analysis shows that the two-frame-group invariant extended Kalman filter (TFG-IEKF) and the tangent-group equivariant filter (TG-EqF) do not offer a significant consistency advantage over the invariant extended Kalman filter (IEKF). Experiments with an INS/ZUPT measurement system show that, under small initial attitude errors, the conventional indirect extended Kalman filter (EKF) achieves loop-closure position errors below $0.1\%$ of the traveled distance, while the three geometric filters achieve comparable positioning accuracy.

0.13

Reliable Doppler Estimation in Asynchronous Moving ISAC Devices via IMU Integration

eess.SP ·2026-09-30 ·Zaman Bhalli, Jacopo Pegoraro, Gianmaria Ventura, Paolo Casari, Michele Rossi
similarity 0.61
Abstract · 6 pages, 5 figures. Submitted to IEEE VTC2027-Spring

We present an Integrated Sensing And Communication (ISAC) framework for the joint estimation of the Doppler frequency of a passive mobile target in a bistatic scenario with clock-asynchronous nodes and where the Receiver (RX) is static but the Transmitter (TX) is mobile. In such a setup, previous geometric solutions are integrated with an Inertial Measurement Unit (IMU) device at the TX, coming up with a truly joint data fusion and estimation algorithm based on extended Kalman filtering. The approach jointly estimates the target Doppler frequency, along with the speed and direction of motion of the TX and it is robust to the unavailability of static paths between the TX and RX pair, a condition that makes previous solutions ineffective. The developed extended Kalman filter strikes a balance between the accuracy of ISAC and the IMU reliability. The proposed solution is validated via numerical simulations, obtaining a median Doppler error of 1.2% with a smartphone-grade IMU under realistic operating conditions.

0.36

Design and Implementation of a Kalman Filter-Infused Algorithm for Tilt Estimation

cs.CV cs.ROeess.SPeess.SY ·2026-09-01 ·Yuehan Ma, Hongji Dai
similarity 0.60
Abstract · 12 pages, 24 figures, 10 references

Accurate tilt angle estimation is important in many engineering applications, such as robotics, motion tracking, and embedded control systems. However, measurements from low-cost inertial sensors are often degraded by noise and drift. This paper presents a single-axis tilt angle estimation system based on the MPU6050 inertial measurement unit, implemented on an RP2040 microcontroller platform, with sensor fusion achieved through a Kalman filter. The accelerometer provides a direct estimate of tilt angle from gravity but is sensitive to noise and short-term fluctuations. The gyroscope provides smooth angular rate measurements, but integration over time introduces drift. To overcome these limitations, a Kalman filter is used to combine measurements from both sensors, leveraging the long-term stability of the accelerometer and the short-term smoothness of the gyroscope. Both simulation and hardware experiments are performed. In simulation, sensor noise and drift are modeled to evaluate the filter performance under control conditions. In the hardware implementation, real-time MPU6050 data is acquired and processed by the RP2040 platform, and the estimated tilt angle is compared with accelerometer-only and gyroscope-only outputs. The results show that the proposed method effectively reduces noise measurements and suppresses long-term drift while preserving good dynamic response. Overall, the system provides more stable and accurate tilt estimation than either sensor alone, demonstrating a practical and accessible approach for Kalman filter based sensor fusion in embedded application. This manuscript is a preprint version of the work. Keywords: Kalman Filter, Accelerometer, Gyroscope, Noise Reduction, Angle Tracking

0.27

Pressure Drop: Gravity Vector Estimation from a Distributed Barometric Pressure Sensor Array

cs.RO ·2026-11-17 ·William Dubois, Nicolas Lauzon, Johann Laconte, François Pomerleau
similarity 0.59
Abstract · 8 pages, 6 figures, submitted to IEEE ICRA 2027

While gravity is often used in mobile robotics as a global constraint for Simultaneous Localization and Mapping (SLAM) algorithms, most estimation methods rely on indirect observation of the gravity vector. In this paper, we propose the use of altimeter measurements to directly observe the direction of the gravity vector. We provide a theoretical evaluation of the estimation noise and validate it through extensive experimental data, along with an evaluation of the impact of intersensor distance on our gravity vector estimates. Experimental results demonstrate that a median error of $0.87^\circ$ on the tilt estimation can be achieved with our system in semi-static scenarios. Furthermore, we demonstrate the potential of this approach by comparing it with state-of-the-art methods based on Inertial Measurement Units (IMUs). We highlight that we achieve similar performance to that of IMU-based systems in highly dynamic scenarios and even outperform in specific cases of accelerometer measurement saturation. Finally, an additional experiment shows the potential use within a robotic system through the integration into an Iterative Closest Point (ICP) algorithm.

0.25

Efficient Sensor Fusion Through Covariance-Constrained Observation Decimation (CCOD)

eess.SY ·2026-09-02 ·Andres Enriquez Fernandez, Erik Blasch, Angel Flores-Abad, John J. Bird
similarity 0.59
Abstract

Observation decimation is frequently employed in state estimation to reduce sensing, communication, and computational requirements, but decreasing the measurement assimilation frequency increases estimation uncertainty. Selecting an appropriate observation decimation factor therefore requires accurately predicting the resulting estimator performance. While the discrete algebraic Riccati equation (DARE) provides the steady-state estimation-error covariance for standard linear time-invariant Kalman filters, it is not directly applicable to estimators employing decimated measurement updates. Existing approaches address this limitation through lifted system representations or periodic Riccati equation formulations, both of which incur additional computational complexity. This paper presents a covariance-constrained observation decimation (CCOD) framework that reformulates the DARE inputs using equivalent decimated system and process-noise matrices that capture covariance growth between measurement updates. The proposed reformulation enables direct prediction of the steady-state estimation-error covariance through a single DARE evaluation without increasing the system dimension or solving coupled periodic Riccati equations. The resulting covariance prediction is used to determine the maximum observation decimation factor that satisfies a prescribed estimation uncertainty bound. Validation using a high dimensional linear time-invariant system and a space object tracking application demonstrates that the proposed approach accurately predicts steady-state estimator performance while reducing the measurement assimilation frequency required to satisfy specified covariance constraints.

0.21

Consensus-Based Distributed Filtering for Angles-Only Tracking in Cislunar Space

eess.SY cs.MA ·2026-10-22 ·Giovanni Romagnoli, Fabrizio Pilone, Giordana Bucchioni
publishedbenchmark similarity 0.58
Abstract · Accepted for presentation at IEEE NAVICON 2026

This paper investigates consensus-based distributed filtering strategies for multi-observer angles-only navigation in the cislunar space. The objective is to estimate the inertial state of a target spacecraft using only line-of-sight measurements collected by a network of observer spacecraft. This problem is particularly relevant for autonomous cislunar navigation, where ground support may be limited, and centralized fusion architectures may be problematic due to communication and computational constraints, and single-point failure risks. Three distributed filtering approaches are considered: the Distributed Extended Kalman Filter, the Information-Weighted Consensus Filter, and the Kalman Consensus Filter. All methods share the same local prediction and measurement-processing steps, but differ in the way information is exchanged and fused across the network. Their performance is evaluated and compared to a centralized Extended Kalman Filter, adopted as benchmark, and independent local filters in a high-fidelity cislunar scenario. Numerical simulations show that the distributed approaches significantly improve estimation accuracy with respect to independent filters. Monte Carlo sensitivity analyses are then conducted to characterize the robustness of the considered methods to finite consensus iterations and prior misalignment among the agents.

0.21

A Tightly Coupled Magnetic-Inertial SLAM System for Field Robots

cs.RO eess.SP ·2026-11-02 ·Chuan Huang, Tongxing Peng
similarity 0.58
Abstract

Field robots operating in mines, tunnels, and disaster areas require reliable localization despite GNSS denial and degraded camera and LiDAR measurements caused by dust, smoke, or poor illumination. Missions involving both ground and aerial robots further motivate complementary sensing modalities that do not depend on visibility, preinstalled infrastructure, or wheel contact. This letter presents MISLAM, a tightly coupled magnetic-inertial simultaneous localization and mapping system using an IMU and a nine-magnetometer array, without relying on external odometry or platform-specific motion assumptions. The system combines the inertial navigation model with local polynomial magnetic-field models for short-term motion estimation and a global Gaussian process model for drift correction using an error-state Kalman filter. Offline evaluation on three indoor datasets collected with a handheld rig shows reductions in total endpoint closure error of 45.7% - 78.0% relative to magnetic-inertial odometry. Under poor illumination, MISLAM maintains tracking after visual-inertial odometry fails, achieving a horizontal closure error of 0.332 m, although vertical drift remains a limitation. These results support magnetic-inertial SLAM as a complementary localization modality for robotic sensor suites operating under degraded visual conditions.

0.16

Belief-Adaptive Online Autonomy for Quadrotor UAV Navigation under GNSS Degradation in Urban Environments

cs.RO eess.SY ·2026-09-13 ·Deepak Kumar Panda, Weisi Guo
similarity 0.58
Abstract

Reliable online autonomy is critical for quadrotor operation in urban airspaces, where global navigation satellite systems (GNSS) measurements suffer from multipath, blockage, and latency issues, introducing non-stationary, temporally correlated errors that degrade conventional GNSS-IMU fusion. This paper presents a belief-adaptive online autonomy framework that augments an extended Kalman filter (EKF) with explicit GNSS trust modelling, second-order online belief adaptation, and latency-aware out-of-sequence measurement handling. GNSS trust is represented as a latent belief state that modulates measurement weighting and multipath bias uncertainty, and is updated online using EKF consistency signals. Unlike reactive covariance tuning, the proposed approach enables proactive and stable sensor trust adaptation without prior environmental knowledge or offline training. Evaluation in simulated urban air mobility scenarios with correlated multipath, stochastic latency, and obstacle constraints demonstrates improved belief convergence, smoother trajectories, and reduced estimation and tracking errors compared to naive, adaptive, and first-order baselines. The framework preserves classical GNSS-IMU fusion structure and can be integrated directly into existing flight control pipelines, supporting robust online autonomy in GNSS degraded environments.

0.16