CS Paper Radar

Building A CSFQ-Inspired Transport for Switched CXL Memory Pooling

Zerui Guo, Emily Shriver, Ming Liu

cs.NI ·submitted 2026-08-22 02:27 UTC · v1
published

Abstract

Emerging switched CXL memory pooling systems, albeit promising, suffer from significant performance interference due to the shared but performance-uncontrolled data path among concurrent memory streams between a host core and a remote DIMM. We systematically characterize a memory pooling appliance based on XConn's Apollo CXL switch and identify three issues: intra-host contention, in-fabric congestion, and unmanaged host-remote DIMM interaction. This paper presents a new transport layer, MemChannel, which provides the mchannel abstraction to manage end-to-end fabric bandwidth among competing memory flows and enable application-specific traffic for switched CXL memory pooling. Our key idea is to build a sender-driven, fabric-informed transport protocol, inspired by Core-Stateless Fair Queueing (CSFQ), that admits just the right amount of CXL requests to each mchannel based on the estimated core-to-CXL-DIMM bandwidth availability. To address CXL-induced idiosyncrasies, MemChannel introduces time-based rate control, host-side admission control, cross-host bookkeeping, new congestion signals, rate estimation based on the fluid model, and delay-based link-capacity adjustment. We build MemChannel from scratch and support unmodified applications. Evaluations over switched memory pooling demonstrate its effectiveness from performance-isolation, scalability, and multi-tenancy perspectives.

Closest papers

Nearest neighbours by meaning across the whole index.

CMM-MP: A Novel Memory Pooling Architecture using Purpose-built Memory Device with CXL and Ethernet

cs.AR ·2026-10-15 ·Michael Wasef, Gongjin Sun, Edmund Au, Ranjitha Gopalakrishna, Elham Movahedian +13 more
similarity 0.69
Abstract · 12 pages. Submitted to IEEE Transactions on Computers. CMM-MP is also evaluated in "LLM KV Cache Storage using CXL Memory," IEEE Computer Ar…

CXL Memory Module - Memory Pooling (CMM-MP) introduces a novel memory pooling architecture to meet the unique requirements of emerging memory-intensive workloads. This industry-first, purpose-built memory-pooling device combines the benefits of Compute Express Link (CXL) with the scalability and cost advantages of Ethernet. Multiple CMM-MP devices together provide a flexible, composable, and disaggregated memory expansion solution. The CMM-MP enables 100s of TB capacity for GPU/CPU applications without modifications. The memory pool is exposed as a large-capacity logical aggregate memory, with all pool discovery, composition, and backend network datapath tasks fully offloaded to the device. CMM-MP supports both memory pooling and sharing usage modes. It provides an application latency of 2.7 us and up to 23 GB/s of memory throughput. Our evaluations demonstrate that CMM-MP significantly outperforms RDMA-based solutions in latency and throughput. We also evaluated real-world use cases of Valkey+YCSB and DiskANN using CMM-MP.

0.39

PCM: Programmable Congestion Management for Terabit RDMA NICs

cs.NI ·2026-10-09 ·Mikhail Khalilov, Timo Schneider, Tommaso Bonato, Siyuan Shen, Marcin Chrapek +8 more
similarity 0.64
Abstract

Datacenter congestion control (CC) and load balancing (LB) evolve rapidly as workload demands change, but deployment depends on RDMA hardware and transport interfaces. Emerging programmable RDMA engines tie policy code to vendor APIs. Operators must therefore port each policy for every platform they deploy. We address this with PCM, a programming model that separates portable congestion management from platform integration on datacenter NICs. Developers write event-driven handlers that they can debug in simulation and reuse on real hardware. PCM exposes flow telemetry as signals and uses triggers to support per-event reactions and coarser responses to accumulated feedback. Vendors provide optimized backends that map signals and output controls to native NIC mechanisms with defined feedback and control semantics. We demonstrate PCM's expressivity by implementing eleven well-known datacenter CC and LB algorithms. We deploy PCM across four distinct datapaths: an Ultra Ethernet simulator, CPU-based UCCL, and on-NIC offloads on NVIDIA ConnectX-8 and Microsoft 1P. On CX-8, PCM-Swift achieves processing capacity equivalent to one reaction per three 4 KiB packets at 800 Gbit/s, using one-fifth of the NIC's hardware threads. In UCCL, it matches native Swift's 1.56 Tbit/s goodput with 64 KiB chunk-level control. PCM's design informed ongoing Ultra Ethernet work toward a portable congestion management interface.

0.30

SURMA: Efficient Fine-Grained Communication Offload for SuperPOD

cs.AR ·2026-11-16 ·Haoran Shang, Weifeng Zhang, Mengzhu Li, Huizheng Wang, Sihan Guan +12 more
similarity 0.64
Abstract

GPU SuperPODs underpin large language model (LLM) serving, but growing bandwidth and round-trip times make inter-GPU communication consume increasing compute resources. SM-driven remote memory access occupies shared memory or registers for in-flight data and competes for SM-to-NoC bandwidth. Dedicated engines can free these resources, but must handle fine-grained transfers, down to a 576\,B KV-cache entry. NVIDIA's CopyEngine uses less than 1\% of NVLink bandwidth at 7\,KB granularity. We present SURMA, an on-die Scale-Up Remote Memory Access engine. Adapting RDMA requires overcoming slow doorbell submission, excessive per-application connection state, head-of-line blocking of completion notifications on shared connections, and costly ordering for multipath transfers. SURMA uses a credit-based shared send queue to reduce submission latency from 1.2\,$μ$s to 400\,ns; fused write-with-atomic semantics to share connections while independently notifying each transaction; and Network Per Path Ordering to ensure data arrives before the completion flag without Sender or Receiver Ordering. We implement SURMA in RTL on a two-FPGA prototype and evaluate it with two 8-GPU NVLink servers. At 512\,B granularity, SURMA saturates attainable bandwidth with a single SM, whereas NVLink needs over 14\% of the SMs. SURMA occupies under 0.5\% of GPU area and accelerates inference on four models by 1.05--1.26$\times$ over NVLink.

0.19

Composable CXL Memory as a Kubernetes-Native Shared Memory for LLM Serving

cs.DC cs.LG ·2026-09-09 ·Hongjian Fan, Kevin Zhang, David Habinsky, Sean Dykstra
similarity 0.63
Abstract · 23 pages, 9 figures, 9 tables

We present a Kubernetes Dynamic Resource Allocation (DRA) driver that makes composable CXL memory a schedulable cluster resource, and evaluate the resulting shared-memory tier for cross-node KV-cache reuse in LLM serving. The driver composes CXL regions on demand, materializes them as DAX devices on each participating host, and injects them into pods under a single Container Device Interface (CDI) name so that pods on different nodes access the same physical region. A shared-memory connector for vLLM/llm-d uses that region as a KV-cache tier with a slot directory embedded inside the shared medium, which eliminates the need for an external metadata service. On a two-node cluster with a 512\,GiB CXL appliance and Qwen2.5-7B-Instruct, cross-node prefix reuse reduces TTFT by 5.5$\times$--36.6$\times$ at an external hit rate of 95.4--99.5\,\%, while node-local tiers (GPU prefix caching, CPU-DRAM offload) fall back to full recompute. The sharing gap, defined as the latency ratio between cross-node and same-node reuse, is 1--4\%, indicating that cross-node reuse incurs little additional latency relative to same-node reuse on our testbed. Both replicas run full engines; the study demonstrates memory disaggregation rather than prefill/decode disaggregation. We report this as a feasibility study rather than a performance evaluation.

0.34

Completion-Path Credits: Multi-Resource Control for Scale-Up Fabrics

cs.NI ·2026-08-18 ·Fan Yang, Jiaqi Liu, Tao Jiang, Zhan Wang
similarity 0.63
Abstract · 10 pages, 5 figures

Scale-up fabrics connecting GPUs and AI accelerators carry tensor transfers together with remote reads, writes, atomics, and notifications over shared target-side receiver resources. Byte-denominated credits protect link buffers and streaming HBM traffic, but poorly represent small operations dominated by Atomic execution or response injection. This paper presents SemaCredit, a receiver controller that admits each remote-memory operation against a vector of target-resource demands and returns each component when its corresponding HBM, Atomic, or response stage completes. In a deterministic event simulator with multipath queues, eight HBM partitions, a serialized Atomic engine, and a response engine, SemaCredit matches a strong per-resource byte baseline on HBM-hotspot traffic while reducing small-operation P99 latency by 52.4% under Atomic contention and 10.2% under response incast. Application-shaped mixes show 57.7% and 14.5% P99 latency improvements for AllReduce-shaped and remote-read-shaped traffic while matching byte credits on HBM-dominated MoE traffic.

0.12

PANEM: A Heuristic Latency Model

cs.AR cs.PF ·2026-08-28 ·Lucas Crowthers, Mahesh Madhav
published similarity 0.63
Abstract · 12 pages, 23 figures, Presented at the 2026 IEEE International Symposium on Workload Characterization (IISWC 2026), Boulder, Colorado

Accurate pre-silicon memory modeling is essential for achieving meaningful representation of workloads on cloud-class many-core processors. Existing options force a poor tradeoff between fidelity and speed: fixed-latency models are fast but misleading, while cycle-accurate DRAM models are costly and difficult to scale across large study spaces or onto single-core environments. This paper presents PANEM, a lightweight event-driven heuristic model that has guided four generations of commercial server-core development at Ampere Computing. PANEM converts bandwidth-latency characterization data into a dynamic request-bytes/latency response, allowing miss latency to adapt to transient demand, queuing pressure, and read/write mix during simulation. Integrated into a single-core flow with configurable system-loading assumptions, PANEM enables realistic bandwidth constraints and contention-aware latency behavior without sacrificing throughput. Across a broad cloud workload trace suite, PANEM avoids the optimistic and pessimistic biases of fixed-latency baselines, yields more reliable conclusions for prefetching and dynamic throttling studies, and materially improves core-resource sizing decisions. These results show that a calibrated, contention-aware abstraction can deliver practical predictive value for industrial design-space exploration at simulation costs similar to fixed-latency models.

0.46

A New Lens on Multi-GPU Communication: API-Level Memory Models for Portable Optimization

cs.DC ·2026-10-12 ·Johnathan Alsop, Bradford Beckmann, Brandon Potter, Jiakun Yan, Aurelien Bouteiller +3 more
similarity 0.63
Abstract

As network communication increasingly becomes a performance bottleneck for ML and HPC workloads, it is more important than ever to optimize multi-GPU data transfers. Recently, low-level device APIs have emerged that allow programmers to perform fine-grain optimizations via one-sided put/get operations triggered directly from the device. However, the communication libraries providing these device APIs (e.g., rocSHMEM, MSCCL++, and NCCL/RCCL GIN) currently lack a rigorous memory model defining how their primitives interact with the underlying memory systems. Without this, emerging HPC and ML workloads aggressively optimizing network communication via device APIs can be brittle, error-prone, and face compatibility and inter-operability challenges. This paper proposes the use of API-level memory models for these emerging device communication APIs. An API-level memory model defines the memory semantics of communication API calls in a way that abstracts lower-level details from the API user and simplifies development. This work defines one such model for device-side communication (implemented in AMD's recently open sourced rocSHMEM library) and demonstrates how formal relaxations to such a model can enable low-level LLM performance optimizations while retaining a well-defined standardized interface. Specifically, we describe how updating the SHMEM API implemented by rocSHMEM can properly support cache bypassing for network data, improving performance of a collective communication workload by up to 2.48x, a fused compute+communication workload by up to 1.77x, and a state-of-the-art expert-parallel communication workload by up to 1.18x.

0.28

xTier: Intelligent Tiering for CXL-Enabled Memory

cs.OS ·2026-09-23 ·Sriranga Ramaswamy, Yueqi Chen
similarity 0.62
Abstract

CXL-enabled memory expands server memory capacity, but introduces a page-placement problem: the operating system must decide which pages should reside in DRAM and which should reside on slower CXL memory. Existing systems make this tradeoff in one of two ways. Userspace controllers support flexible policies, but expose placement decisions to scheduler jitter and kernel-userspace crossing overhead. Kernel-space systems avoid this latency, but rely on fixed heuristics that must generalize across workloads. We present xTier, a kernel-resident learned memory-tiering system. xTier attaches eBPF programs to PEBS events and uses a compact quantized MLP to score sampled pages inside the kernel at microsecond-scale latency. Rather than reacting to every candidate, xTier converges to a low-churn placement for the current workload phase, reduces sampling cost after convergence, and returns to a higher sampling cadence when the workload shifts. We evaluate xTier on six memory-bound workloads at DRAM:CXL ratios from 1:5 to 1:25. The advantage grows as the DRAM budget tightens. At 1:15 and beyond, xTier is the fastest system in 14 of 18 configurations. Where it is not fastest, it trails the best baseline by 3.9% on average. It reaches this performance while moving 13% fewer pages in geometric mean, and 22% fewer at the tighter ratios. When a workload changes phase, xTier rebuilds its hot set in DRAM faster and more completely than any baseline.

0.23