CS Paper Radar

Reliability-Aware Scheduling for Digital Twin Maintenance

Milica Jankov, Carlo Fischione

cs.NI ·submitted 2026-08-22 09:22 UTC · v1
published

Abstract

In Industrial Internet of Things systems, learning-enabled Digital Twins (DTs) support remote monitoring by using data reported by distributed devices to maintain digital representations of physical processes. When uplink resources are limited, a base station cannot collect new observations from every device at every communication slot and must decide which devices should transmit. This decision becomes challenging when the physical process changes after the DT models have already been trained. In such cases, recent observations alone may not keep the DT accurate, because the learned model may no longer match the underlying process. This paper studies how to schedule observation requests so that the DT maintained at the base station remains close to the true physical process. We define the Ensemble Disagreement Indicator (EDI) as an uncertainty measure computed at the base station from the spread among estimates produced by independently trained DT predictors. Building on EDI, we propose R-VoU, a reliability-aware value-of-update scheduler that prioritizes the observations expected to most improve the DT by reducing a cost based on uncertainty and predicted DT error. The DT is further adjusted online using the difference between received observations and current predictions. Experiments on process manufacturing data show that, under limited communication budgets, R-VoU achieves the lowest combined cost and DT estimation error among the compared schedulers that use only information available before each scheduling decision.

Comment
accepted to IEEE GLOBECOM 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Sylvas: Synergistic Learning Value based Device Scheduling in Federated Continual Learning

cs.LG cs.AI ·2026-09-14 ·Yuxuan Sun, Yuxuan Bai, Tan Chen, Sheng Zhou, Zhisheng Niu
similarity 0.65
Abstract · This work has been submitted to the IEEE for possible publication

Federated continual learning (FCL) enables shared global models to continuously adapt to distributed and non-stationary data streams, making it important for Internet of Things applications such as intelligent transportation, industrial monitoring, and unmanned systems. Under spatio-temporal data distribution dynamics and label scarcity, a key challenge is how to quantify the contribution of each edge device to global learning performance and schedule the most valuable devices under resource constraints for timely model updating. This article presents Sylvas, a synergistic learning value based device scheduling framework for FCL at the wireless edge. Sylvas evaluates the learning value of distributed data from two perspectives: distributional value, which characterizes the contribution of device data to global model learning from a spatio-temporal distribution perspective, and label value, which captures the quantity and reliability tradeoff of pseudo-labeled data. By integrating these factors into a synergistic learning value metric, Sylvas schedules devices with high learning value while satisfying communication and computation resource constraints. Case studies demonstrate that Sylvas supports timely model adaptation under spatio-temporal distribution dynamics and effectively exploits unlabeled data.

0.10

Integrating Machine Learning and Uncertainty Quantification for Real-Time Decision-Making in Digital Twins: A System-Centric Review and Perspective

cs.LG stat.AP ·2026-11-03 ·Yi-Ping Chen, Ying-Kuan Tsai, Seul Lee, Vispi Karkaria, Dex Doksoo Lee +1 more
similarity 0.63
Abstract

Digital Twins are evolving from passive virtual representations into closed-loop systems that continuously synchronize with physical assets and drive real-time decisions. Yet predictive modeling, machine learning (ML), uncertainty quantification (UQ), and decision-making have been studied as separate capabilities, leaving limited understanding of their integration and maintenance during online operation. This narrative review, scoped by the functional requirements of real-time decision-making rather than by Digital Twin terminology alone, examines how such decisions are generated and sustained in engineering Digital Twins. We first examine foundational decision-making architectures and representative engineering applications, followed by methods that address their limitations across the decision loop. We identify optimization-based, policy-based, and knowledge-based approaches as the major pathways from virtual representation to action. Across them, ML plays three roles in decision-making: enabling efficient surrogate modeling, transforming heterogeneous physical feedback into decision-relevant information, and accelerating or directly generating decisions. UQ supports uncertainty-aware decisions and model adaptation, while continual validation, drift detection, and adaptation help maintain reliable operation as the physical system evolves. Together, these findings underscore the need for a shift from a model-centric to a system-centric perspective on Digital Twins, where its performance depends on the interactions with sensing, state estimation, computation, decision-making, and adaptation rather than on their standalone performance. Therefore, future research should shift from isolated algorithm development toward system-level co-design, scalable decision-making, and approaches to design, and data-efficient continual adaptation and validation for AI-enabled autonomous systems.

0.15

Decision-Making in Digital Twins: Optimization, Control, and Learning

eess.SY math.OC ·2026-10-12 ·Enlu Zhou
similarity 0.60
Abstract

A digital twin is a virtual representation of a physical system, continuously updated with data from the physical system, enabling dynamic information exchange and decision-making. This bidirectional interaction, which distinguishes digital twins from conventional simulation models, introduces new challenges to simulation-based optimization, control, and learning. This paper reviews recent developments in decision-making methodologies motivated by digital twins. We focus on three interconnected areas: simulation optimization, sequential decision making, and risk-aware decision making. For simulation optimization, we discuss data-driven simulation optimization under input uncertainty, streaming input data, decision-dependent observations, and limited computational and data-collection resources. For sequential decision making, we review the connections among digital twins, stochastic optimal control, and reinforcement learning, with emphasis on Bayesian approaches that update models and policies as new information becomes available. For risk-aware decision making, we discuss distributionally robust and Bayesian risk formulations as alternative approaches for addressing model uncertainty. Throughout the paper, we emphasize the common problem of making decisions while the underlying model is being updated. We conclude by identifying research challenges and opportunities.

0.27

Digital Twin Degradation: Detecting Cyber Physical Attacks via Temporal Inconsistencies

cs.CR cs.AIcs.LG ·2026-08-17 ·Konstantinos E. Kampourakis, Vasileios Gkioulos, Sokratis Katsikas
similarity 0.59
Abstract · 18 pages, 2 figures

Digital Twins (DTs) are increasingly used to monitor and analyze Cyber Physical Systems (CPS). However, in adversarial environments, the fidelity of a DT cannot be assumed. Communication delays, data manipulation, sensor degradation, or partial information loss may cause the DT state to diverge from the physical process it represents. Such divergence creates temporal inconsistencies that may reveal cyber physical attacks. This paper proposes a detection framework that monitors temporal consistency between the physical system and a potentially degraded DT view. A DT predictor is trained exclusively on normal system behavior to model short-term system dynamics. During operation, discrepancies between predicted and observed states are transformed into multi-horizon temporal features capturing the magnitude, persistence, and evolution of prediction residuals. An unsupervised density model characterizes normal consistency patterns, while a sequential change detection mechanism identifies sustained deviations indicative of attacks. The approach is evaluated on three widely used Industrial Control System (ICS) datasets, SWaT, HAI, and BATADAL, under multiple DT degradation scenarios, including time desynchronization and partial observability loss. Results show that temporal inconsistency patterns enable reliable event-level attack detection with bounded false alarm rates and low detection latency. The proposed method achieves up to 98% detection reliability on SWaT and false alarm rates below 2%. Unlike conventional anomaly detection methods, the proposed framework does not require attack signatures or labeled attack data and remains effective even when the DT view is degraded. These results suggest that DT degradation, often treated as a limitation, can instead serve as a useful signal for cyber physical security monitoring.

0.50

Distributed Linear Bandits for Freshness-Aware Preprocessing in MEC-Enabled Digital Twin Networks

cs.DC cs.LG ·2026-11-03 ·Mariam Yahya, Setareh Maghsudi
similarity 0.58
Abstract

Digital twins (DTs) require timely updates from Internet of Things (IoT) devices to accurately represent the state of the corresponding physical systems, but transmitting large data volumes can compromise freshness. Moreover, different task classes have distinct computational demands and freshness requirements, while stochastic task generation and sizes complicate resource allocation. In this paper, we propose a freshness-aware framework in which multi-access edge computing (MEC) servers preprocess IoT data, reducing transmission volume and DT-server processing load. The framework establishes mutual support between DT and MEC servers. The DTs determine feasible CPU-allocation strategies guaranteeing class-specific age-of-information (AoI) requirements under specified workload, delay, and update-generation bounds. MEC servers collaboratively identify the feasible strategy minimizing expected freshness-normalized preprocessing delay. We formulate CPU-strategy selection as a fixed-confidence distributed best-arm identification problem in linear bandits, with MEC servers as agents and CPU allocations across task classes as arms. We employ DistLinGapE, a distributed collaborative learning method, to coordinate exploration and share observations. Numerical results show that the method identifies the optimal feasible strategy and reduces preprocessing delay when deployed under stationary task-class assignments and workload statistics. Collaboration yields an identification speedup nearly proportional to the number of participating MEC servers in the evaluated settings.

0.26

A Human-Centric Adaptive Multi-Fidelity Digital Twin Framework for Cyber-Physical Systems

cs.HC eess.SY ·2026-11-18 ·Clarisa Grijalva-Lugo, Yu-Zheng Lin, Shalaka Satam, Sicong Shao, Jesus Pacheco +2 more
similarity 0.58
Abstract · 20 pages, 3 figures, 11 tables; submitted to Advanced Engineering Informatics

Digital twins of cyber-physical systems must operate with scarce data, on assets that change after deployment, and for humans whose needs differ, yet existing implementations fix fidelity at design time and do not match the representation to the human or the task. This paper proposes a human-centric adaptive multi-fidelity digital twin framework that models the evolving human, the physical twin, and the digital twin core, and adds a human inference and adaptation function that estimates the human state, predicts the response, and adapts the representation. The framework defines low-, medium-, and high-fidelity tiers distinguished by adaptivity and by coupling, quantified as the ratio of the digital twin latency to the duration of the process step it follows. Three proof-of-concept instantiations are evaluated: a virtual reality tutor, a computer numerical control milling model, and an industrial training station. The low tier estimated learner sentiment with an accuracy of 0.86. The forecasters of the milling model and the training station, both medium-tier, showed a normalized error decline of 0.39 to 0.89 and a human adaptation gain of 1.16 to 1.51, but their latency exceeded the physical process step by 25 to 87 times. Only the station's vision model met the physical step. The tiers are separated by which functions adapt and where the latency constraint lies, not by a monotone increase in gain or coupling.

0.22

Assessing Fixed-Batch Reporting for Deadline-constrained Inference in Intermittently Powered IoT

eess.SY cs.PF ·2026-09-06 ·Onel L. A. López
theory similarity 0.57
Abstract · Submitted to Transactions on Mobile Computing

Energy-harvesting Internet of Things (IoT) devices must decide whether to transmit each observation immediately or accumulate several observations before reporting to the edge. Early reports make information from initial observations available sooner at the edge but require more transmission actions, whereas larger batches save reports while delaying that information and retaining more state. We develop a unified analytical framework to compare this fixed-batching choice in scenarios with repeated, deadline-constrained inference cycles. Every configuration processes the same ordered observations and yields the same final posterior if all reports arrive, enabling a controlled comparison of the persistent state, actions, and energy costs induced by batching. Using reductions in Bayesian risk under the continuous ranked probability score (CRPS), we express long-run timely value exactly as a statistical-value-weighted sum of expected decision-weighted report availabilities. This separates the inferential value of observations from their availability at application-relevant decision times. We construct exact Markov-reward models accounting jointly for intermittent harvesting, finite storage, energy carry-over, unreliable delivery, retransmissions, and deadlines. We prove that the long-run regime is well defined and derive exact batch-size comparisons, timing benchmarks, and a decomposition of harvesting-law effects into within-cycle and carry-over contributions. Directly evaluable Gaussian and Gaussian-mixture belief specializations show that the preferred batch size can change with the prior, the decision-time profile, link reliability, harvested-energy statistics, and accumulation cost.

0.17

Tutorial on Closed-Loop and Application-Aware Digital Twins for Future Wireless Networks

cs.NI ·2026-10-10 ·Yuchen Liu, Sara Garcia Sanchez, Mingzhe Chen, Xingqin Lin, Berk Canberk +1 more
surveyhot direction similarity 0.56
Abstract

To support emerging applications such as extended reality, autonomous systems, and large-scale cyber-physical infrastructures, next-generation wireless networks must evolve beyond traditional communication paradigms toward tightly integrated and closed-loop systems. Digital Twin Networks (DTNs) have recently emerged as a key enabler of this transformation by bridging the physical and digital worlds through real-time, bidirectional interactions and adaptive control mechanisms. In this tutorial, we provide a comprehensive overview of DTN design and optimization across multiple system dimensions. Specifically, we first introduce the fundamental design principles of DTN creation, including high-fidelity twin modeling, telemetry integration, and cyber-physical synchronization. We then present resource optimization and semantic-driven DTNs, where application-aware objectives and semantic abstractions guide efficient data processing, communication, and decision-making. Subsequently, we explore physical-layer optimization techniques for DTNs, emphasizing joint sensing, communication, and adaptive wireless resource control. Furthermore, we examine DTN-guided network management and feedback optimization, focusing on closed-loop learning, real-time control, and reinforcement-driven adaptation between digital twins and physical networks. Finally, we review ongoing standardization efforts and enabling tools that support the practical deployment of DTNs in real-world systems. This tutorial aims to provide a unified perspective on DTNs as an emerging paradigm for application-aware, AI-native, and closed-loop wireless systems, and to highlight key challenges and future research directions in this rapidly evolving field.

0.24