CS Paper Radar

Event-Driven Simulation of Power Electronics Rich Grid Models

Ajay Pratap Yadav, James Nutaro

eess.SY ·submitted 2026-08-23 05:40 UTC · v1

Abstract

Power-electronics systems should be treated according to their natural mathematical structure---inherent switching and discontinuities with piecewise continuous states. Therefore, the simulator should be organized around events, switching topologies, and topology intervals, rather than only around a continuous-time solver that later corrects or smooths discontinuities. This paper presents a simple, event-driven EMT architecture using native C kernels with Python orchestration. With this method, we distill the essential elements of discrete-event simulation applied to power electronics problems and thereby point toward a broad research thrust wherein mature ideas from discrete-event simulation are adapted for use in simulating power electronics circuits.

Closest papers

Nearest neighbours by meaning across the whole index.

Numerical Stability Issues and a Mitigation Method in Switching Events Calculation Considering State Variable Discontinuities for EMT Simulation

eess.SY ·2026-11-08 ·Sheng Lei
similarity 0.67
Abstract · Copyright may be transferred without notice, after which this version may no longer be accessible

Some existing methods for switching events calculation considering state variable discontinuities for EMT simulation can encounter numerical stability issues, either over-stabilizing or destabilizing the studied power systems. This paper documents these issues in detail with a concrete example. The underlying mechanism of the issues are revealed via systematic analysis. A mitigation method for the issues is proposed. The convergence behavior of the method is analyzed. Numerical examples demonstrate the effectiveness of the method. It is observed that the method also helps to improve the accuracy of the simulation results.

0.29

Unifying Power Flow and Electromagnetic Transient Modeling

eess.SY ·2026-09-08 ·Tina Gao, Aayushya Agarwala, Timothy McNamara, Lawrence Pileggi
similarity 0.61
Abstract

Grid tools are separated by timescales: steady-state analysis is performed by power flow (PF), whereas the fastest dynamics are captured by electromagnetic transient (EMT) simulation. Although operating at varying timescales, different tools should produce consistent results when analyzing the same grid conditions. However, the PF steady-state solution does not match the time-to-infinity EMT response. This mismatch exists because simplified device models in PF are inconsistent with the "ground truth" EMT models derived from first principles. As inverter-based resources (IBRs) and data centers strip away inertia and operating reserves, approximations used in PF risk grid security by missing violations. To address this, we introduce a steady-state framework that uses full-physics EMT models for high-fidelity steady-state grid analysis. The challenge lies in systematically formulating algebraic frequency-domain representations of dynamic power devices that are naturally described in state-space form. Our tool, SALT (Steady-state After Last Transients), constructs steady-state representations that exactly capture grid device physics when embedded into transmission networks. The approach exploits the structural properties of power device models and the single-harmonic, balanced nature of the transmission system. Results demonstrate SALT achieves EMT steady-state accuracy while delivering a 1x10^6 times speedup. We demonstrate that SALT can capture security threats in contingency scenarios without exception --- whereas PF-based analyses reported 75% fewer rated line violations, 18% fewer Q-limit violations, and 7% fewer voltage violations.

0.20

Open-Source Multi-Fidelity EMT Modeling of Data Center Loads for Power System Studies

eess.SY ·2026-11-06 ·Xingyu Zhao, Yingyi Tang, Junbo Zhao
code/data similarity 0.58
Abstract

Characterizing data center-grid interactions under rapid load fluctuations requires electromagnetic transient (EMT) models that capture fast converter and control dynamics. This paper develops a modular multi-fidelity EMT model of data center loads in PSCAD. The modular design supports flexible assembly of subsystem models for different power supply configurations. The multi-fidelity design incorporates switching models, average-converter models, and reduced-order models to balance simulation accuracy and computational efficiency according to analysis needs. The model also provides a systematic controller tuning procedure and supports control mode switching. Comparative simulations demonstrate how this data center load model responds to both grid-side and load-side disturbances and assess the accuracy and computational efficiency of models with three fidelity levels. The model is publicly available on GitHub.

0.34

A Nested Heterogeneous Multiscale Framework for Power System Dynamic Simulation

eess.SY ·2026-11-07 ·Kaiyang Huang, Min Xiong, Yang Liu, Kai Sun
similarity 0.57
Abstract · This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may…

Power system dynamics involve multiple timescales, from electromagnetic transients of the network and inverter-based resources to electromechanical oscillations of synchronous generators and quasi-steady-state evolution of the operating point. Simulating these dynamics with a detailed electromagnetic transient model is computationally prohibitive, whereas existing methods reduce the model to focus on a single timescale and lose accuracy when dynamics of different timescales interact. This paper proposes a nested heterogeneous multiscale framework for highly efficient multi-timescale simulation of a power system represented by one unified detailed model. Rather than varying only the integration step, the framework adaptively shifts the simulation resolution among three nested levels so that the dynamics of interest at each stage are always captured, with the slower dynamics estimated on the fly from short detailed simulations at controlled accuracy. Theoretical analysis proves the stability of long steps during quasi-steady-state evolution and quantifies the attainable speedup. On a modified IEEE 39-bus system with frequency regulation and load restoration, the framework accurately reproduces the dynamics of all timescales and runs 15 to 18 times faster than conventional simulation of the detailed model. The accuracy and speedup of the proposed method are further verified on a 390-bus system, demonstrating its scalability to large power systems.

0.31

Efficient Co-simulator Integration with Application to Smart Grids

cs.NI ·2026-09-02 ·Talha Ibn Aziz, Jihoon Og, Ioanis Nikolaidis, Omid Ardakanian
benchmark similarity 0.56
Abstract · 12 pages

The evolution of the electric power grid towards a ``smart grid'' is an example of an emerging large-scale cyber-physical system. To study the potential of cyberattacks or other sources of extreme events, high-fidelity co-simulation is one of the few realistic strategies. In this work, we demonstrate a practical and high-performance co-simulation strategy for smart grids, which provides lessons about co-simulation integration that can be carried over to other cyber-physical systems. Specifically, we present a co-simulation platform based on the Mosaik framework that integrates several federates including OpenDSS for power flow, a refined NS-3 for communication networks, and custom Python-based simulators for on-load tap changer control, distributed state estimation, and data collection. We compare synchronization strategies -- exhaustive lock-step time advancement versus an optimized event-driven approach that exploits lower-bound time stamps (LBTS) and next-event prediction -- and introduce targeted refinements to NS-3 event handling and relevance filtering of internal events. Performance is evaluated on two standard IEEE benchmark systems: the 13-node test feeder with tap-changer voltage regulation and a large-scale 33-bus system augmented with 32 European low-voltage feeders (1,793 nodes total) performing distributed state estimation with thousands of phasors and smart meters. Experimental results demonstrate that the refined event-based synchronization that uses LBTS-based NS-3 event filtering reduces execution time by up to 50\% over non-filtered LBTS, and more than 4$\times$ in the tap control scenario compared to naïve lock-step methods, while strictly preserving temporal correctness and simulation accuracy.

0.27

Comparison of Open-Source PSCAD EMT Models for Large-Scale AI Data Centers in Smart Grids

eess.SY ·2026-11-17 ·Alex Chen, Ahmad Mohammad Saber, Deepa Kundur
similarity 0.54
Abstract · 5 pages, 2 figures, submitted to PESGM 2027

The rapid deployment of artificial intelligence data centers (AIDCs) introduces gigawatt-scale, highly nonlinear, and fast-varying electronic loads that challenge grid voltage regulation, frequency stability, and disturbance ride-through. Capturing their transient behavior during grid faults and rapid computational workload swings requires high-fidelity electromagnetic transient (EMT) simulations rather than root mean square models. However, limited methodologies exist to audit the component-level adequacy of EMT AIDC models. This paper proposes a software-agnostic, 41-point fidelity framework spanning 11 categories that synthesizes 37 criteria from an existing modeling guideline with four novel requirements: frequency ride-through compliance, disaggregated fan and chiller cooling loads, temperature-dependent thermal response, and DC information technology (IT) load representations. Applying this framework to the four publicly available AIDC models in PSCAD/EMTDC reveals varying degrees of completeness: while the models capture IT load transitions, uninterruptible power supplies, and transfer switches for bulk stability studies, critical gaps remain in electro-thermal cooling coupling, internal protective relaying, and site-level controls. Addressing these gaps will enable comprehensive protection coordination and ride-through compliance studies.

0.22

Limitations of RMS-based Stability Assessment of Converter-based Grids: A Case Study

eess.SY ·2026-08-19 ·Pol Jane-Soneira, Ognjen Stanojev, Francisco Canales Perez, Qian Long, Mario Schweizer +1 more
similarity 0.53
Abstract

The increasing penetration of power electronic converters in industrial grids introduces stability challenges at frequencies well above the electromechanical range of traditional power systems. Commercial software tools typically perform eigenvalue-based stability analysis using root-mean-square (RMS) models that assume a quasi-stationary network, thereby neglecting electromagnetic dynamics of assets --- which is standard practice in power system analysis. This paper presents a case study of an industrial grid where the conventional RMS-based eigenvalue analysis predicts stable operation, while a detailed electromagnetic transient (EMT) simulation reveals growing oscillations, indicating instability. To bridge this gap, we introduce an alternative modeling approach that formulates the network dynamics in the rotating $dq$ reference frame, retaining the differential equations of electromagnetic dynamics. The resulting model enables eigenvalue analysis that correctly identifies the unstable modes, consistent with the EMT simulation results. Our findings highlight a fundamental limitation of RMS-based stability assessment for converter-dominated grids and demonstrate that dynamic impedance models in the dq frame provide a viable path toward accurate small-signal analysis encompassing high-frequency converter-network interactions.

0.32

An Integrated EMT Small-Signal Stability Analysis Tool for Power Systems with High Inverter-Based Resource Penetration

eess.SY ·2026-09-14 ·Zihao Qin, Xiaonan Lu, Shuan Dong, Jin Tan
published similarity 0.52
Abstract · 6 pages, 4 figures, 2 tables. Accepted for presentation at the 2026 IEEE Industry Applications Society (IAS) Annual Meeting

The ongoing replacement of synchronous generation by inverter-based resources (IBRs) introduces fast converter control dynamics whose characteristic frequencies extend beyond the classical electromechanical band. Conventional small-signal stability tools are commonly formulated in the phasor domain, representing electrical quantities as slowly varying phasors at the fundamental frequency, and therefore cannot resolve the sub-synchronous and converter-driven dynamics that increasingly arise in operation. Electromagnetic Transient (EMT) modeling captures these dynamics, but established EMT simulators produce time-domain waveforms rather than the modal indicators (eigenvalues, damping ratios, and participation factors) needed to assess stability risk. This paper presents EMT-SSA, an integrated tool suite for EMT-level small-signal analysis of IBR-rich power systems. From a standard PSS/E system snapshot (.raw/.dyr), it converts the model into an EMT representation with enhanced fidelity, solves an extended power flow for the steady-state equilibrium points of both the network and the device controllers, and linearizes a full-order EMT model to form the system state matrix, from which it produces eigenvalues, oscillation modes, and participation factor analysis results over a device library spanning synchronous generators, grid-following and grid-forming inverters, transmission lines, and loads. The EMT-SSA tool suite identifies poorly damped or unstable modes and attributes them to specific devices. The tool is demonstrated on the Kundur two-area system, with its modal results benchmarked against PSS/E NEVA.

0.16