CS Paper Radar

A Nested Heterogeneous Multiscale Framework for Power System Dynamic Simulation

Kaiyang Huang, Min Xiong, Yang Liu, Kai Sun

eess.SY ·submitted 2026-11-07 16:29 UTC · v2

Abstract

Power system dynamics involve multiple timescales, from electromagnetic transients of the network and inverter-based resources to electromechanical oscillations of synchronous generators and quasi-steady-state evolution of the operating point. Simulating these dynamics with a detailed electromagnetic transient model is computationally prohibitive, whereas existing methods reduce the model to focus on a single timescale and lose accuracy when dynamics of different timescales interact. This paper proposes a nested heterogeneous multiscale framework for highly efficient multi-timescale simulation of a power system represented by one unified detailed model. Rather than varying only the integration step, the framework adaptively shifts the simulation resolution among three nested levels so that the dynamics of interest at each stage are always captured, with the slower dynamics estimated on the fly from short detailed simulations at controlled accuracy. Theoretical analysis proves the stability of long steps during quasi-steady-state evolution and quantifies the attainable speedup. On a modified IEEE 39-bus system with frequency regulation and load restoration, the framework accurately reproduces the dynamics of all timescales and runs 15 to 18 times faster than conventional simulation of the detailed model. The accuracy and speedup of the proposed method are further verified on a 390-bus system, demonstrating its scalability to large power systems.

Comment
This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible

Closest papers

Nearest neighbours by meaning across the whole index.

Multi-time-scale Control of Power Systems

eess.SY math.OC ·2026-10-26 ·Emiliano Dall'Anese, John W. Simpson-Porco, Florian Dorfler, Saverio Bolognani, Sairaj Dhople
survey similarity 0.63
Abstract · Submitted for publication

The power grid has been dominated by large synchronous generators and clearly separated control layers. Today, power-electronics energy conversion interfaces are rapidly being deployed calling for another look at system-level control hierarchies. This article examines how multi-time-scale modeling, feedback control, and feedback optimization can help reinterpret the traditional organically grown hierarchy of primary control, automatic generation control, and economic dispatch, and enable new approaches for control of contemporary power systems. Beginning with an overview of power system models and conventional operational practices, the article develops connections to modern control architectures that can coordinate heterogeneous resources, account for operational constraints, and exploit faster actuation without overlooking first-principles physics.

0.28

Limitations of RMS-based Stability Assessment of Converter-based Grids: A Case Study

eess.SY ·2026-08-19 ·Pol Jane-Soneira, Ognjen Stanojev, Francisco Canales Perez, Qian Long, Mario Schweizer +1 more
similarity 0.62
Abstract

The increasing penetration of power electronic converters in industrial grids introduces stability challenges at frequencies well above the electromechanical range of traditional power systems. Commercial software tools typically perform eigenvalue-based stability analysis using root-mean-square (RMS) models that assume a quasi-stationary network, thereby neglecting electromagnetic dynamics of assets --- which is standard practice in power system analysis. This paper presents a case study of an industrial grid where the conventional RMS-based eigenvalue analysis predicts stable operation, while a detailed electromagnetic transient (EMT) simulation reveals growing oscillations, indicating instability. To bridge this gap, we introduce an alternative modeling approach that formulates the network dynamics in the rotating $dq$ reference frame, retaining the differential equations of electromagnetic dynamics. The resulting model enables eigenvalue analysis that correctly identifies the unstable modes, consistent with the EMT simulation results. Our findings highlight a fundamental limitation of RMS-based stability assessment for converter-dominated grids and demonstrate that dynamic impedance models in the dq frame provide a viable path toward accurate small-signal analysis encompassing high-frequency converter-network interactions.

0.32

An Integrated EMT Small-Signal Stability Analysis Tool for Power Systems with High Inverter-Based Resource Penetration

eess.SY ·2026-09-14 ·Zihao Qin, Xiaonan Lu, Shuan Dong, Jin Tan
published similarity 0.60
Abstract · 6 pages, 4 figures, 2 tables. Accepted for presentation at the 2026 IEEE Industry Applications Society (IAS) Annual Meeting

The ongoing replacement of synchronous generation by inverter-based resources (IBRs) introduces fast converter control dynamics whose characteristic frequencies extend beyond the classical electromechanical band. Conventional small-signal stability tools are commonly formulated in the phasor domain, representing electrical quantities as slowly varying phasors at the fundamental frequency, and therefore cannot resolve the sub-synchronous and converter-driven dynamics that increasingly arise in operation. Electromagnetic Transient (EMT) modeling captures these dynamics, but established EMT simulators produce time-domain waveforms rather than the modal indicators (eigenvalues, damping ratios, and participation factors) needed to assess stability risk. This paper presents EMT-SSA, an integrated tool suite for EMT-level small-signal analysis of IBR-rich power systems. From a standard PSS/E system snapshot (.raw/.dyr), it converts the model into an EMT representation with enhanced fidelity, solves an extended power flow for the steady-state equilibrium points of both the network and the device controllers, and linearizes a full-order EMT model to form the system state matrix, from which it produces eigenvalues, oscillation modes, and participation factor analysis results over a device library spanning synchronous generators, grid-following and grid-forming inverters, transmission lines, and loads. The EMT-SSA tool suite identifies poorly damped or unstable modes and attributes them to specific devices. The tool is demonstrated on the Kundur two-area system, with its modal results benchmarked against PSS/E NEVA.

0.16

Unifying Power Flow and Electromagnetic Transient Modeling

eess.SY ·2026-09-08 ·Tina Gao, Aayushya Agarwala, Timothy McNamara, Lawrence Pileggi
similarity 0.59
Abstract

Grid tools are separated by timescales: steady-state analysis is performed by power flow (PF), whereas the fastest dynamics are captured by electromagnetic transient (EMT) simulation. Although operating at varying timescales, different tools should produce consistent results when analyzing the same grid conditions. However, the PF steady-state solution does not match the time-to-infinity EMT response. This mismatch exists because simplified device models in PF are inconsistent with the "ground truth" EMT models derived from first principles. As inverter-based resources (IBRs) and data centers strip away inertia and operating reserves, approximations used in PF risk grid security by missing violations. To address this, we introduce a steady-state framework that uses full-physics EMT models for high-fidelity steady-state grid analysis. The challenge lies in systematically formulating algebraic frequency-domain representations of dynamic power devices that are naturally described in state-space form. Our tool, SALT (Steady-state After Last Transients), constructs steady-state representations that exactly capture grid device physics when embedded into transmission networks. The approach exploits the structural properties of power device models and the single-harmonic, balanced nature of the transmission system. Results demonstrate SALT achieves EMT steady-state accuracy while delivering a 1x10^6 times speedup. We demonstrate that SALT can capture security threats in contingency scenarios without exception --- whereas PF-based analyses reported 75% fewer rated line violations, 18% fewer Q-limit violations, and 7% fewer voltage violations.

0.20

RAPTOR: RAndom-projection Physics-informed Transient sOlveR

eess.SY cs.LGcs.MSmath.NA ·2026-08-31 ·Petros Ellinas, Benjamin Vilmann, Spyros Chatzivasileiadis, Johanna Vorwerk
similarity 0.57
Abstract

The complexity of time-domain simulation of modern power systems has increased significantly because converter-based resources introduce control dynamics that must be simulated alongside slower system-level and fast electromagnetic dynamics. The resulting wide range of timescales may force classical time-domain solvers to use small timesteps, complicate the solution of nonlinear equations at each timestep, and reduce solver reliability under strongly nonlinear and multi-timescale transient conditions. This paper introduces RAPTOR, a first-of-its-kind time-domain simulation framework for power system dynamic simulations. At its core, RAPTOR introduces a new integration technique that represents the unknown trajectory of hybrid differential-algebraic equations (DAEs) over a time interval using a physics-informed random-projection neural network (PIRPNN) built from fixed Gaussian radial basis functions (RBFs). A nonlinear solver, e.g., Newton-Raphson, determines how to combine the fixed RBFs so that the resulting trajectory satisfies the governing equations. By combining RBFs with broad and localized shapes, RAPTOR can represent complex multi-timescale behavior over comparatively long time intervals. This enables larger effective simulation advances, fewer overall nonlinear solver iterations, and faster integration over long time horizons. Numerical studies on stiff RMS models, IEEE 9-, 14-, 39-, 57-, and 118-bus RMS simulation benchmarks, and EMT test cases show that RAPTOR accurately finds solutions with substantially fewer sequential simulation advances while offering superior accuracy-runtime performance. With speedups of over 10x in certain cases, these results showcase RAPTOR's potential to outperform long-standing and widely used integration methods, such as the Radau method and the trapezoidal rule.

0.24

Open-Source Multi-Fidelity EMT Modeling of Data Center Loads for Power System Studies

eess.SY ·2026-11-06 ·Xingyu Zhao, Yingyi Tang, Junbo Zhao
code/data similarity 0.57
Abstract

Characterizing data center-grid interactions under rapid load fluctuations requires electromagnetic transient (EMT) models that capture fast converter and control dynamics. This paper develops a modular multi-fidelity EMT model of data center loads in PSCAD. The modular design supports flexible assembly of subsystem models for different power supply configurations. The multi-fidelity design incorporates switching models, average-converter models, and reduced-order models to balance simulation accuracy and computational efficiency according to analysis needs. The model also provides a systematic controller tuning procedure and supports control mode switching. Comparative simulations demonstrate how this data center load model responds to both grid-side and load-side disturbances and assess the accuracy and computational efficiency of models with three fidelity levels. The model is publicly available on GitHub.

0.34

Event-Driven Simulation of Power Electronics Rich Grid Models

eess.SY ·2026-08-23 ·Ajay Pratap Yadav, James Nutaro
similarity 0.57
Abstract

Power-electronics systems should be treated according to their natural mathematical structure---inherent switching and discontinuities with piecewise continuous states. Therefore, the simulator should be organized around events, switching topologies, and topology intervals, rather than only around a continuous-time solver that later corrects or smooths discontinuities. This paper presents a simple, event-driven EMT architecture using native C kernels with Python orchestration. With this method, we distill the essential elements of discrete-event simulation applied to power electronics problems and thereby point toward a broad research thrust wherein mature ideas from discrete-event simulation are adapted for use in simulating power electronics circuits.

0.24

Generalized and Unified Power Flow Framework for Converter-Dominated AC/DC Power Grids

eess.SY ·2026-10-18 ·Hamin Chang, Fei Teng, Gyu-Sub Lee, Jae-Won Chang
code/data similarity 0.56
Abstract · Submitted to IEEE Transactions on Power Systems. 10 pages + 10-page appendix (Appendices A-C included at the end). Code: https://github.com/…

Modern power grids increasingly rely on power electronic interfaces, requiring steady-state power flow analysis to accommodate diverse operating modes and network structures. Conventional approaches often rely on system-specific formulations and sequential approaches to handle such complexity. However, these approaches may limit applicability to diverse grid configurations and lead to convergence and computational issues. To address these limitations, this paper proposes a generalized and unified Newton-Raphson (NR) power flow framework for AC/DC hybrid grids. For generalized operational modeling, conventional and droop operating modes of generators and interlinking converters are represented through a common set of coefficients. For generalized structural modeling, models of AC transformers and DC/DC converters accommodate different transformer winding configurations and converter operating modes. For a unified solution, augmented variables are introduced to incorporate droop deadbands, output limits, and converter station losses into a single NR formulation, eliminating the need for sequential outer loops. To validate the effectiveness of the proposed framework, its results are compared with those obtained from existing power flow methods and electromagnetic transient simulations across transmission networks, distribution networks, and microgrids. The implementation is made publicly available to facilitate its use in analyzing AC/DC hybrid grids.

0.36