CS Paper Radar

A Simple and Extremely Efficient Predictive Control for Power Converters

Guangze Chen, Zhenbin Zhang

eess.SY ·submitted 2026-08-23 13:40 UTC · v1

Abstract

Classical finite control set based model predictive control (FCS-MPC) reduces the optimal problems to an enumerated searching algorithm, which is very simple and effective to control power converters. However, it requires a large amount of enumeration operations, increasing its computational load and hardware costs. In this work, we propose a new and simple predictive control technique with extreme efficiency. The proposal directly selects the optimal vector via determined visual maps, abstained solely requiring a rearrangement of the cost function and a simple fitting law, without any enumeration. It has been validated under a lab-constructed power converter and a set of commercialized low-cost digital controllers. Experimental data confirm that the proposal achieves the same control performance as classical MPC, with significant computational burden reduction (up to 88\% for one-step prediction of two-level converters)

Closest papers

Nearest neighbours by meaning across the whole index.

Efficient MPC for LC-Filtered Three-Level NPC Inverters in Vehicle-to-Load Applications

eess.SY ·2026-10-28 ·Rock Agon, Dieudonne Iradukunda
similarity 0.63
Abstract

Finite control-set model predictive control (FCS-MPC) offers fast, modulator-free voltage regulation but is sensitive to the fidelity of its internal model. This sensitivity is usually countered by algorithmic augmentation, disturbance observers, adaptive weighting, or learning-based estimators, at the cost of extra tuning and computation. This paper instead improves fidelity at the source. For a three-level neutral-point-clamped (3L-NPC) inverter with an LC output filter in vehicle-to-load operation, a coupled alpha-beta-frame predictive model carries the capacitor voltage and filter current jointly through the state vector, so that the second-order LC coupling is retained without enlarging the 27-candidate search. The cost function additionally regulates dc-link neutral-point balance and switching effort. One-step prediction accuracy, parametric sensitivity, and computational cost are bounded in closed form. Simulation of a V2L system yields a voltage total harmonic distortion of 0.72%, a steady-state tracking error of 1.6%, and transient recovery within one fundamental cycle, meeting the applicable IEEE power-quality limits with margin, without observers, parameter estimation, or learning-based augmentation.

0.25

Formal Synthesis of Robust Koopman-Model Predictive Control: A Case Study in AC-DC Power Conversion

eess.SY ·2026-09-14 ·Shun Hirose, Shiu Mochiyama, Yoshihiko Susuki
similarity 0.58
Abstract · 6 pages, 3 figures, 1 table

This letter proposes a formal synthesis of Robust Koopman-Model Predictive Control (RK-MPC), a novel data-driven approach to formal synthesis of systems with nonlinear dynamics. We formulate a novel optimization problem for RK-MPC by incorporating specifications described by Signal Temporal Logic and prove its closed-loop performance. Effectiveness of the proposed RK-MPC is evaluated by applying it to the reliable design of an AC-DC power converter.

0.43

Fast-DeePC: Fast Data-Enabled Predictive Control using Soft-constrained Scheme

eess.SY ·2026-10-09 ·Terry Zhang, Jan Drgona, Malika Sader, Di Liu, Liang Wu
similarity 0.57
Abstract · 8 pages, submission to ACC 2027

Data-enabled predictive control (DeePC) replaces the explicit system model of model predictive control with a data-driven predictor built directly from recorded input-output trajectories, but the original hard-equality formulation keeps its coordinate vector as an online decision variable whose size grows with the offline data length, so the online problem grows more expensive as more data is used to enrich the behavioral representation. This article proposes Fast-DeePC, a framework which relaxes this consistency relation into the control objective with a quadratic ridge on the coordinate vector in place of the customary sparsity-promoting penalty, admitting a closed-form, offline elimination of the coordinate vector and reducing the online problem to a fixed-size box-constrained quadratic program solved by a structure-exploiting interior-point method. On identical soft quadratically regularized problems, the result matches a general-purpose solver's solution and is up to two orders of magnitude faster.

0.24

Online Optimization for Controlling HVAC Systems

eess.SY math.OC ·2026-11-05 ·Tong Wu, Dominik Baumann, Angela Fontan, Nicola Bastianello
similarity 0.55
Abstract

Heating, ventilation, and air-conditioning (HVAC) systems account for a significant portion of buildings' energy consumption, motivating the design of energy- and cost-efficient control strategies. However, conventional strategies employ simple, reactive control, without incorporating a model. Therefore, in this paper we adopt an economic model predictive control framework and focus on designing online algorithms to solve the control input design problems with a limited computational budget. In particular, we propose two tailored online algorithms based on projected gradient descent, with a custom projection routine, and the projected primal-dual method. We discuss the pros and cons of both algorithm designs, focusing in particular on computational efficiency. We further compare them through numerical experiments simulating the control of an HVAC system over the course of a day. The results show that computationally efficient online solvers for HVAC systems control are indeed possible. Moreover, the performance closely matches that of a baseline algorithm with unlimited computational budget, in terms of reference temperature tracking and comfort temperature range enforcement.

0.30

Economic Model Predictive Control with Policy-Guided Terminal Ingredients

eess.SY ·2026-09-02 ·Salim Msaad, Robert D. McAllister
similarity 0.55
Abstract

Conventional designs for model predictive control typically rely on terminal costs and constraints derived from a steady state to guarantee closed-loop stability and performance. However, this dependence on a steady-state assumption limits the applicability of this control method to systems in which such a fixed operating point is either not available or not desirable. This work introduces a novel framework, termed policy-guided MPC, to address this limitation. Our approach constructs terminal costs and constraints using a known sub-optimal control policy. Specifically, the terminal region is defined around a center determined by a rollout of the policy, and a penalty on deviation from this center is used to define the terminal cost. This method obviates the need for a steady state or reference trajectory. Closed-loop performance guarantees are established relative to the guiding policy, for both finite and infinite horizon problems. The effectiveness of the proposed framework is demonstrated through numerical simulations on an energy management example.

0.22

Enhanced Imitation Learning of Model Predictive Control through Importance Weighting

eess.SY ·2026-11-04 ·Pere Izquierdo Gómez, Miguel E. López Gajardo, Nenad Mijatovic, Tomislav Dragicevic
top venuehighly cited similarity 0.55
Abstract

The approximation of model predictive control (MPC) algorithms with neural network models has received significant attention in the power electronics research community, as a valuable tool to enable the real-time implementation of computationally expensive methods. Training machine learning models to imitate MPC algorithms typically follows a traditional supervised learning flow, with a static training data set generated through either uniform sampling or simulation. Training with uniformly distributed data allows models to maintain consistent performance throughout the entire operating space, but very small models may fail to achieve satisfactory results in the regions corresponding to expected operation. Conversely, simulation data can be used in training to obtain models that can accurately track certain trajectories but fail to achieve adequate performance in underrepresented regions. The present article proposes a method to combine the advantages of both methods, by training models on sampled data with importance weights obtained through the kernel density estimation of experimental data. This allows the training process to target specific regions of the operating space, and results in measurable performance improvements. The method is demonstrated through the imitation of a moving discretized control set MPC algorithm for a dual active bridge converter, and is validated through experimental results.

0.70

Towards Passivity-informed Data-driven Predictive Control

eess.SY ·2026-11-09 ·Guanru Pan, Oleksii Molodchyk, Mohammad Itani, Timm Faulwasser
similarity 0.52
Abstract

We propose a passivity-informed data-driven predictive control framework based on passivity-preserving sampling of unknown continuous-time linear systems. We incorporate the passive supply rate into the objective functional alongside an output-regulation cost, thereby explicitly accounting for energy extraction. Despite being practically motivated, the resulting objective is not always convex; its convexity depends on the collected input-output training data. We exploit passivity-induced positive semidefiniteness to derive an equivalent reformulation that remains a convex quadratic program independently of the data. Furthermore, we establish recursive feasibility and asymptotic output convergence using passivity and a terminal equality constraint. Numerical simulations illustrate the closed-loop performance and computational benefits of the proposed approach.

0.24

FAME-QP: A GPU-Accelerated Quadratic-Programming Solver for Real-Time Model Predictive Control

cs.RO cs.GReess.SY ·2026-11-10 ·Santosh Mohan Rajkumar, Debdipta Goswami, Stephanie Stockar
similarity 0.51
Abstract

We present FAME-QP, a GPU-accelerated solver for dense quadratic programs arising in linear model predictive control. FAME-QP combines constraint-dependent operator representations with fused single- and two-kernel iterations replayed through CUDA graphs, automatically selecting the execution configuration through device calibration and problem-specific timing. It probes a cached operator bank to select the initial penalty and updates operators lazily when problem matrices change. Numerical benchmarks and simulated humanoid and quadrotor control experiments demonstrate reduced latency relative to competing GPU solvers while maintaining solution accuracy and control performance.

0.31