CS Paper Radar

Efficient MPC for LC-Filtered Three-Level NPC Inverters in Vehicle-to-Load Applications

Rock Agon, Dieudonne Iradukunda

eess.SY ·submitted 2026-10-28 20:17 UTC · v1

Abstract

Finite control-set model predictive control (FCS-MPC) offers fast, modulator-free voltage regulation but is sensitive to the fidelity of its internal model. This sensitivity is usually countered by algorithmic augmentation, disturbance observers, adaptive weighting, or learning-based estimators, at the cost of extra tuning and computation. This paper instead improves fidelity at the source. For a three-level neutral-point-clamped (3L-NPC) inverter with an LC output filter in vehicle-to-load operation, a coupled alpha-beta-frame predictive model carries the capacitor voltage and filter current jointly through the state vector, so that the second-order LC coupling is retained without enlarging the 27-candidate search. The cost function additionally regulates dc-link neutral-point balance and switching effort. One-step prediction accuracy, parametric sensitivity, and computational cost are bounded in closed form. Simulation of a V2L system yields a voltage total harmonic distortion of 0.72%, a steady-state tracking error of 1.6%, and transient recovery within one fundamental cycle, meeting the applicable IEEE power-quality limits with margin, without observers, parameter estimation, or learning-based augmentation.

Closest papers

Nearest neighbours by meaning across the whole index.

A Simple and Extremely Efficient Predictive Control for Power Converters

eess.SY ·2026-08-23 ·Guangze Chen, Zhenbin Zhang
similarity 0.63
Abstract

Classical finite control set based model predictive control (FCS-MPC) reduces the optimal problems to an enumerated searching algorithm, which is very simple and effective to control power converters. However, it requires a large amount of enumeration operations, increasing its computational load and hardware costs. In this work, we propose a new and simple predictive control technique with extreme efficiency. The proposal directly selects the optimal vector via determined visual maps, abstained solely requiring a rearrangement of the cost function and a simple fitting law, without any enumeration. It has been validated under a lab-constructed power converter and a set of commercialized low-cost digital controllers. Experimental data confirm that the proposal achieves the same control performance as classical MPC, with significant computational burden reduction (up to 88\% for one-step prediction of two-level converters)

0.26

Asynchronous Model Predictive Control Under Model Mismatch: Stability and Performance Guarantees

eess.SY ·2026-09-08 ·Changrui Liu, Anil Alan, Shengling Shi, Bart De Schutter
similarity 0.57
Abstract · This is the first work to characterize the joint effects of model mismatch, general asynchronous feedback, and prediction horizon on stabili…

Certainty-equivalence model predictive control (CE-MPC) is widely used for its simplicity and efficiency, but theoretical guarantees under asynchronous feedback remain limited. This paper establishes stability and performance guarantees for asynchronous CE-MPC of input-constrained nonlinear systems. We first derive a nominal stability condition and competitive-ratio bound that explicitly account for inter-execution intervals without prescribing a feedback mechanism. A value-function perturbation analysis for quadratic stage costs then accommodates additive, potentially non-smooth model mismatch without constraint qualification conditions. Combining these results yields stability criteria and competitive-ratio bounds for CE-MPC under general asynchronous feedback, including event/self-triggered and multi-step MPC. The guarantees explicitly relate prediction horizon, inter-execution time, and uncertainty magnitude, quantifying performance degradation relative to an ideal infinite-horizon controller. These results clarify tradeoffs between feedback frequency, model accuracy, and horizon length, guiding asynchronous MPC design using approximate or learned models.

0.30

Adaptive Model Predictive Control for Ground Vehicles: Review and Demonstrative Implementation

eess.SY ·2026-08-18 ·Chetana Gadgil, Mahendra Singh Tomar
similarity 0.56
Abstract · 16 pages, 4 figures, journal

This paper reviews Adaptive Model Predictive Control (AMPC) methods for Autonomous Vehicles (AVs), focusing on control strategies that dynamically adapt to uncertainties and changing conditions in real-time. The critical role of Adaptive Model Predictive Control (AMPC) in addressing the challenges of autonomous vehicle control are discussed. For the scope of this paper, AMPC is defined as a class of Model Predictive Control (MPC) techniques that modify the system model, cost function, constraints, or prediction horizon, based on real-time data. Traditional MPC, while effective for constrained optimization, struggles with model inaccuracies, computational demands, and dynamic environments, necessitating AMPC methods. The review covers existing literature on Gain scheduled MPC, Online Model Estimation MPC, Weight Adaptive MPC, Horizon Adaptive MPC, Learning Based MPC, and Hybrid MPC that combines MPC with other control methods. In addition to the survey, a demonstrative simulation of an adaptive MPC controller is presented that illustrates practical aspects of weight and speed adaptation in trajectory tracking.

0.29

Data-driven current control of modular multilevel converter-based HVDC transmission system

eess.SY ·2026-11-05 ·Victor D. Reyes Dreke, Rahul Rane, Aleksandra Lekić
similarity 0.55
Abstract · 8 pages, submitted to IET AC and DC Power Transmission (ACDC)

Model-based design (MBD) is a mature framework for designing the current controllers of modular multilevel converters (MMCs) in high-voltage direct current (HVDC) transmission systems. In MBD, linear state-space models are preferred for their good trade-off between accurate dynamics prediction and simplicity. However, first-principle derivations often neglect relevant MMC dynamics, which can hinder controller performance. Data-driven (DD) methods can deliver less biased models that capture parameter uncertainties, control-loop interactions, and grid dynamics, yet they remain under-exploited for controlling MMC currents. This paper studies DD current control method based on integral Subspace Predictive Control (iSPC), synthesized directly from input--output data measured in a high fidelity real-time digital simulator (RTDS), and proposes an initial guideline outlining the main steps for its systematic application to MMC current control. The proposed iSPC is compared against state-of-the-art DD solution, and the findings are validated through simulation studies in MATLAB/Simulink.

0.32

Grid-Mode-Aware Model Predictive Control of Hybrid Energy Storage Systems for AI Data Center Power Smoothing

eess.SY ·2026-09-03 ·Xin Chen
similarity 0.54
Abstract

To facilitate the grid-friendly integration of highly variable AI data center loads, this paper proposes a grid-mode-aware model predictive control (G-MPC) framework for managing a hybrid energy storage system (HESS) to smooth grid-side power demand. The framework optimally coordinates a battery energy storage system (BESS) and a supercapacitor (SC) by solving a multi-step optimization problem in a receding-horizon manner. In particular, band-pass filter dynamics are directly embedded in the G-MPC formulation to extract and suppress grid-side power components associated with vulnerable grid oscillatory modes, thus mitigating load-induced grid oscillations. The resulting G-MPC optimization jointly minimizes violations of grid-side power-envelope, ramp-rate, and modal-power requirements and the degradation and power-ramping costs of the BESS and SC, while satisfying power limits, state-of-charge limits, and other operational constraints. To enable real-time implementation, a fix-and-re-optimize algorithm is developed to solve each G-MPC problem efficiently while preventing simultaneous charging and discharging. Extensive simulations demonstrate the effectiveness, flexibility, and computational efficiency of the proposed framework. The results also highlight the importance of explicitly suppressing power components associated with vulnerable grid modes, rather than merely reducing overall load variations, to effectively mitigate grid oscillations.

0.40

Battery-Aware Predictive Trajectory Planning and Control for Multirotors Under Disturbances

cs.RO eess.SY ·2026-09-10 ·Krishna Bhavithavya Kidambi
similarity 0.53
Abstract

This paper presents a battery-aware predictive trajectory-planning and control framework for multirotors operating under spatially localized disturbances. Candidate trajectories are evaluated through closed-loop vehicle--motor--battery propagation, allowing disturbance-induced control demand, electrical energy, battery evolution, and terminal-voltage-dependent actuator capability to enter the planning process. % A reduced-order battery model is numerically benchmarked against an independently implemented Simscape equivalent-circuit reference, with a power NRMSE of $0.64\%$ and a cumulative-energy discrepancy below $0.7\%$. % In a $150$-s, $640$-m mission containing three disturbance regions, the selected trajectory reduces electrical energy consumption by $7.46\%$ and position-tracking RMSE by approximately $72\%$ relative to the disturbance-aware fixed-reference baseline. % Planner ablations show that battery-dependent terms are nonbinding at nominal SOC but alter the selected trajectory under a depleted-battery stress condition. % Execution with multiple feedback controllers further demonstrates that controller selection changes the tradeoff among tracking accuracy, energy consumption, and actuator utilization. % The results demonstrate the benefit of accounting for predicted closed-loop energetic and battery--actuator consequences during trajectory selection.

0.26

Koopman-Based Model Predictive Control for Simultaneous State of Charge and Temperature Balancing of Lithium-Ion Cells

eess.SY ·2026-09-07 ·Jihoon Moon
similarity 0.52
Abstract

Cell-to-cell electrical and thermal variations produce nonuniform state of charge (SoC) and temperature distributions in lithium-ion battery packs. This paper proposes a Koopman-operator-based framework for simultaneous SoC and temperature balancing of series-connected cells. Cell-specific Koopman predictors identified using extended dynamic mode decomposition are assembled into neighboring-cell error dynamics that retain heterogeneity and thermal-disturbance effects. A Tikhonov-regularized feedforward controller provides numerically robust compensation without excessive current amplification, while constrained Koopman-based model predictive control (KMPC) regulates the residual errors through a convex quadratic program. Three-cell simulations validate the controller under two consecutive Urban Dynamometer Driving Schedule cycles. KMPC achieves balancing performance comparable to nonlinear model predictive control (NMPC). Relative to the uncontrolled case, KMPC reduces the RMSEs of the neighboring-cell SoC and core temperature differences by 66-81% and 57-76%, respectively, while reducing the computation time per optimization from 0.0259s for NMPC to 0.0028s for KMPC.

0.31

Optimal Coordination of Heat Pump Demand Flexibility and Battery Energy Storage Considering the Operation of Distribution Networks

eess.SY ·2026-10-06 ·Gustavo L. Aschidamini, Guilherme S. Castiglio, Mariana Resener
similarity 0.51
Abstract

Electrifying space heating with heat pumps (HP) and backup electric-resistance heaters (ERH) is incentivized to support decarbonization but increases voltage and thermal issues in distribution networks. Direct load control (DLC) of smart thermostats (ST) provide grid support, yet, to the best of our knowledge, existing methods do not co-optimize this flexibility with grid-scale battery energy storage systems (BESS) and voltage-regulation devices, and do not use ERH for preheating, limiting peak demand reduction and undervoltage mitigation. We propose a mixed-integer linear programming (MILP)-based model predictive control (MPC) framework that coordinates ST setpoints for preheating and setback, grid-scale BESS, on-load tap changers, switched capacitor banks, and step voltage regulators. The framework is evaluated on 23-node and 733-node distribution networks, including a real-data-based feeder, across multiple realized days. On the 23-node feeder with 50% HP penetration and 50% DLC participation, the proposed framework reduces the feeder peak by 23.1%, and by 27.1% with the co-optimized BESS. Rolling-horizon setpoint optimization contributes 6.5 percentage points beyond a day-ahead ST schedule (16.6%), and dispatching the ERH for preheating adds 2.7 percentage points beyond backup-only operation (20.4%). On the 733-node feeder, where thermal congestion is the binding constraint, the framework reduces overloaded branches by 94% and overloaded transformers by 47%. These results demonstrate the potential of coordinated demand flexibility and voltage regulation to accommodate heating electrification.

0.12