CS Paper Radar

Koopman-Based Model Predictive Control for Simultaneous State of Charge and Temperature Balancing of Lithium-Ion Cells

Jihoon Moon

eess.SY ·submitted 2026-09-07 21:44 UTC · v1

Abstract

Cell-to-cell electrical and thermal variations produce nonuniform state of charge (SoC) and temperature distributions in lithium-ion battery packs. This paper proposes a Koopman-operator-based framework for simultaneous SoC and temperature balancing of series-connected cells. Cell-specific Koopman predictors identified using extended dynamic mode decomposition are assembled into neighboring-cell error dynamics that retain heterogeneity and thermal-disturbance effects. A Tikhonov-regularized feedforward controller provides numerically robust compensation without excessive current amplification, while constrained Koopman-based model predictive control (KMPC) regulates the residual errors through a convex quadratic program. Three-cell simulations validate the controller under two consecutive Urban Dynamometer Driving Schedule cycles. KMPC achieves balancing performance comparable to nonlinear model predictive control (NMPC). Relative to the uncontrolled case, KMPC reduces the RMSEs of the neighboring-cell SoC and core temperature differences by 66-81% and 57-76%, respectively, while reducing the computation time per optimization from 0.0259s for NMPC to 0.0028s for KMPC.

Closest papers

Nearest neighbours by meaning across the whole index.

Building Seasonal Highways for Residential Energy Hubs: Sizing, planning and operating thermal energy storage

eess.SY math.OC ·2026-10-01 ·Dario Slaifstein, Mohammad Khosravi, Gautham Ram Chandra Mouli, Laura Ramirez-Elizondo, Pavol Bauer
similarity 0.67
Abstract

The operation of residential energy hubs with multiple energy carriers (electricity, heat, mobility) poses a significant challenge due to the energy storage differences in time-constants, round-trip efficiencies and self-discharge rates. Usually, thermal storage exhibits flexibility in yearly planning optimizations or long-term scenarios. However, as optimization horizons shrink (1-48hs) so does their supplied value due to the lower round-trip efficiencies. To avoid this early depletion during operation this paper proposes a data-driven highway to steer the short-term daily control towards long-term optimality. The proposed methodology also presents how to optimally size the thermal storage and avoid yearly simulations and how all of this is related to nonlinearities in the daily operation. The presented framework links seasonal and daily optimizations through dynamic terminal sets and value functions. The seasonally-aware nonlinear economic model predictive controller achieves the most balanced performance, with the second best mean grid cost of all MPCs at -\texteuro 209. It also achieves better battery degradation control than its linear counterparts (between 26-34%) and the best thermal comfort of the nonlinear benchmarks. Nevertheless, the data-driven seasonal highway restrains the ability to control battery degradation and slightly increases computational time.

0.14

Optimal Coordination of Heat Pump Demand Flexibility and Battery Energy Storage Considering the Operation of Distribution Networks

eess.SY ·2026-10-06 ·Gustavo L. Aschidamini, Guilherme S. Castiglio, Mariana Resener
similarity 0.67
Abstract

Electrifying space heating with heat pumps (HP) and backup electric-resistance heaters (ERH) is incentivized to support decarbonization but increases voltage and thermal issues in distribution networks. Direct load control (DLC) of smart thermostats (ST) provide grid support, yet, to the best of our knowledge, existing methods do not co-optimize this flexibility with grid-scale battery energy storage systems (BESS) and voltage-regulation devices, and do not use ERH for preheating, limiting peak demand reduction and undervoltage mitigation. We propose a mixed-integer linear programming (MILP)-based model predictive control (MPC) framework that coordinates ST setpoints for preheating and setback, grid-scale BESS, on-load tap changers, switched capacitor banks, and step voltage regulators. The framework is evaluated on 23-node and 733-node distribution networks, including a real-data-based feeder, across multiple realized days. On the 23-node feeder with 50% HP penetration and 50% DLC participation, the proposed framework reduces the feeder peak by 23.1%, and by 27.1% with the co-optimized BESS. Rolling-horizon setpoint optimization contributes 6.5 percentage points beyond a day-ahead ST schedule (16.6%), and dispatching the ERH for preheating adds 2.7 percentage points beyond backup-only operation (20.4%). On the 733-node feeder, where thermal congestion is the binding constraint, the framework reduces overloaded branches by 94% and overloaded transformers by 47%. These results demonstrate the potential of coordinated demand flexibility and voltage regulation to accommodate heating electrification.

0.12

Improving Fast Charging Safety With Core Temperature Estimation Via Kolmogorov-Arnold Network

eess.SY ·2026-08-12 ·Faysal Ahamed, Tanushree Roy
similarity 0.64
Abstract · 14 pages, 3 figures

Fast charging of Lithium-ion batteries can lead to a significant temperature rise, which can cause serious risks to battery safety and lifetime. To ensure safe battery operation, thermal constraints must be enforced during the fast charging process. However, the core temperature of the battery cannot be directly measured in practice, which makes real-time safety enforcement challenging. This paper proposes a framework that incorporates core temperature estimates from Kolmogorov-Arnold Network within robust control barrier function (KAN-rCBF) constraints for battery fast-charging. The algorithm utilizes measurements from battery surface temperature, coolant temperature, coolant power, and charging current to solve a quadratic programming problem under safety constraints. We prescribe analytical safety guarantees for this optimal charging policy under KAN estimation errors and model uncertainty. Simulation results show that the proposed method maintains a safe battery temperature while achieving charging times comparable to the state-of-the-art method, where the latter fails to guarantee the same level of thermal safety.

0.10

Grid-Mode-Aware Model Predictive Control of Hybrid Energy Storage Systems for AI Data Center Power Smoothing

eess.SY ·2026-09-03 ·Xin Chen
similarity 0.63
Abstract

To facilitate the grid-friendly integration of highly variable AI data center loads, this paper proposes a grid-mode-aware model predictive control (G-MPC) framework for managing a hybrid energy storage system (HESS) to smooth grid-side power demand. The framework optimally coordinates a battery energy storage system (BESS) and a supercapacitor (SC) by solving a multi-step optimization problem in a receding-horizon manner. In particular, band-pass filter dynamics are directly embedded in the G-MPC formulation to extract and suppress grid-side power components associated with vulnerable grid oscillatory modes, thus mitigating load-induced grid oscillations. The resulting G-MPC optimization jointly minimizes violations of grid-side power-envelope, ramp-rate, and modal-power requirements and the degradation and power-ramping costs of the BESS and SC, while satisfying power limits, state-of-charge limits, and other operational constraints. To enable real-time implementation, a fix-and-re-optimize algorithm is developed to solve each G-MPC problem efficiently while preventing simultaneous charging and discharging. Extensive simulations demonstrate the effectiveness, flexibility, and computational efficiency of the proposed framework. The results also highlight the importance of explicitly suppressing power components associated with vulnerable grid modes, rather than merely reducing overall load variations, to effectively mitigate grid oscillations.

0.40

Hierarchical Control via MPC-RL for Multi-Timescale Battery Systems

eess.SY ·2026-10-02 ·Rasa Pourjam, Ehecatl Antonio del Río Chanona, Paulina Quintanilla
similarity 0.62
Abstract

Multi-timescale systems present a fundamental challenge, where fast operational decisions must coexist with long-horizon sustainability targets. In this work, we propose a new hierarchical control framework via Model Predictive Control (MPC) and Reinforcement Learning (RL) to separate decision-making on two distinct timescales. The high-level MPC optimizes long-horizon setpoints at the slow dynamic and on a fast timescale, a low-level pretrained RL agent tracks these setpoints in real time to maximize short-term objectives. RL is introduced to learn nonlinear control policies, without relying on model linearizations or requiring the heavy online computation from solving repeated optimal control problems. The framework is applied to a Battery Energy Storage System (BESS) operating in frequency regulation markets to balance fast profit opportunities (seconds) and slow battery degradation (weeks to months). The design employs a degradation-aware RL agent trained offline to generate safe long-horizon setpoints, and a degradation-unaware agent fine-tuned from it for fast runtime setpoint tracking. Compared to MPC baselines, the proposed approach successfully extends battery lifetime by 84% and increases operational profit by 34%.

0.17

Battery-Aware Predictive Trajectory Planning and Control for Multirotors Under Disturbances

cs.RO eess.SY ·2026-09-10 ·Krishna Bhavithavya Kidambi
similarity 0.62
Abstract

This paper presents a battery-aware predictive trajectory-planning and control framework for multirotors operating under spatially localized disturbances. Candidate trajectories are evaluated through closed-loop vehicle--motor--battery propagation, allowing disturbance-induced control demand, electrical energy, battery evolution, and terminal-voltage-dependent actuator capability to enter the planning process. % A reduced-order battery model is numerically benchmarked against an independently implemented Simscape equivalent-circuit reference, with a power NRMSE of $0.64\%$ and a cumulative-energy discrepancy below $0.7\%$. % In a $150$-s, $640$-m mission containing three disturbance regions, the selected trajectory reduces electrical energy consumption by $7.46\%$ and position-tracking RMSE by approximately $72\%$ relative to the disturbance-aware fixed-reference baseline. % Planner ablations show that battery-dependent terms are nonbinding at nominal SOC but alter the selected trajectory under a depleted-battery stress condition. % Execution with multiple feedback controllers further demonstrates that controller selection changes the tradeoff among tracking accuracy, energy consumption, and actuator utilization. % The results demonstrate the benefit of accounting for predicted closed-loop energetic and battery--actuator consequences during trajectory selection.

0.26

Robust Scenario-Based Data-Enabled Predictive Control of a Battery Energy Storage System: An Experimental Study

eess.SY math.OC ·2026-10-06 ·Sebastian Zieglmeier, Nikolas Recke, Mathias Hudoba de Badyn
similarity 0.61
Abstract · 8 pages, 5 figures

Battery energy storage systems must respect strict state-of-charge (SOC) limits to prevent overcharge and deep discharge, a task complicated by measurement noise and costly-to-model nonlinear dynamics. Data-enabled predictive control (DeePC) resolves the costly modeling issue by predicting future behavior directly from data. However, its regularization robustifies only the prediction and not the constraints. Scenario-based DeePC (Scenario-DeePC) extends DeePC with the scenario approach, building constraint robustness fully data-driven from observed prediction errors rather than an assumed disturbance distribution. This paper presents the first real-world deployment of Scenario-DeePC, on a grid-connected battery system at the NEST research facility, whose SOC estimate exhibits abrupt, irregular recalibration jumps in addition to ordinary noise. Compared to standard DeePC, Scenario-DeePC achieves comparable tracking performance with substantially fewer constraint violations. Its adaptive scenario buffer further tightens constraint handling automatically, improving robustness to unpredictable recalibration events.

0.17

Safe Receding Horizon Mixed-Integer Differentiable Predictive Control for Degradation-Aware Battery Dispatch

eess.SY ·2026-09-23 ·Eshagh Safarzadeh Ravajiri, Jan Drgona, Benjamin F. Hobbs
publishedbenchmark similarity 0.61
Abstract · 6 pages, accepted to the 65th IEEE Conference on Decision and Control (CDC 2026)

We present a safe receding-horizon mixed-integer differentiable predictive control methodology for residential battery energy storage dispatch that combines neural-network speed with recursive feasibility guarantees. Unlike open-loop learning-to-optimize methods, it incorporates real-time state-of-charge feedback and sinusoidal time-of-day conditioning, enabling closed-loop re-planning at every timestep without re-solving a mixed-integer program. A differentiable rainflow cycle-counting layer enables self-supervised training of the mixed-integer policy on exact degradation physics. The controller is a hybrid closed-loop system pairing a neural mode-selection and continuous-action policy with a quadratic-programming safety filter that guarantees recursive feasibility independent of network weights or mode optimality. We establish mode-conditioned Lipschitz continuity and a conditional regret decomposition into training-quality, mode-mismatch, and forecast-error terms. On a 7-day net-metering evaluation, the method attains a 6.9% cost gap versus the closed-loop mixed-integer MPC benchmark with a 25x speedup (0.11 s vs 2.7 s per step), while average regret rises by under 4% across 0-30% forecast noise. The learned and benchmark modes agree at every step, so the bound reduces to its training-quality and forecast-error terms, both empirically validated.

0.19