CS Paper Radar

An Energy-Proportional Multimodal and Context-Aware Vision IoT Node

Julian Moosmann, Philipp Mayer, Luca Benini, Michele Magno

eess.IV ·submitted 2026-08-24 12:42 UTC · v1
published

Abstract

While recent advancements in TinyML have significantly reduced the computational complexity of on-device vision pipelines, image acquisition remains a dominant contributor to system-level energy consumption and memory footprint. In vision-enabled IoT platforms, the image sensor consumes energy comparable to the inference engine, thereby offsetting algorithmic efficiency gains. Consequently, current designs face a fundamental trade-off: continuous and always-on sensing incurs prohibitive energy consumption, whereas aggressive duty cycling increases latency and risks missing transient events. This work presents an energy-proportional, context-aware vision IoT node that addresses this challenge through a heterogeneous multimodal dual-camera architecture. Detection and recognition are decoupled by combining an event-based imager operating asynchronously in an energy-efficient always-on wake-on-motion mode together with an RGB imager. Deployed on a low-power microcontroller, a novel TinyissimoYOLOv12 is introduced for efficient and accurate object detection. By activating the high-power image acquisition and processing stages only upon sparse visual triggers, the proposed architecture improves efficiency and latency, eliminating redundant sensing while maintaining continuous monitoring coverage. Experimental results demonstrate an energy consumption of only 222$μ$Wh. Upon a motion trigger, the system completes a full sense-to-report cycle-RGB acquisition, object detection across 80 classes, and LoRa telemetry-with a total energy consumption of 28.7mJ. The network achieves up to 32.3% mAP with a model size of 1 million parameters. At a 1% daily activity ratio, the platform achieves a three-month operational lifetime with a 1.85Wh battery, enabling always-on visual monitoring in a place-and-forget scenario through autonomous edge intelligence.

Closest papers

Nearest neighbours by meaning across the whole index.

Edge AI on Constrained Devices for Binary Sleep-Wake Classification in Dynamic Environments

cs.LG ·2026-09-24 ·Stefan Reitmann, Lena Oden
similarity 0.63
Abstract

This paper presents an Edge AI-based system for detecting sleep and wake states in non-stationary mobile environments using resource-constrained embedded hardware. Conventional approaches relying on accelerometer-based activity metrics are highly susceptible to motion and vibration artifacts and are limited by strict compute and energy budgets of wearable and IoT devices. To address these challenges, a multimodal pipeline is designed and implemented on an ESP32-S3 microcontroller. The system combines inertial sensing for head movement analysis and visual pose classification. A dual-core architecture with FreeRTOS enables parallel execution of real-time data acquisition and on-device inference. Sleep detection follows a two-stage strategy: low-movement detection over a temporal window, followed by visual validation of poses. Experimental results show accuracies of 96.5% for motion-based detection and 89% for pose classification, yielding robust binary sleep-wake classification. Field tests confirmed feasibility in representative mobile scenarios. The results demonstrate that privacy-preserving, local sleep detection is achievable on edge hardware through careful co-design, while highlighting limitations in sensing intrusiveness, dataset scale, and system integration.

0.26

LiteEvent-AE: Lightweight Autoencoder for Event-Based Vision on Low-Latency Energy-Constrained Edge Devices

cs.CV cs.AIeess.IV ·2026-08-22 ·Riadul Islam, Joey Mule, Dhandeep Challagundla, Shahmir Rizvi, Sean Carson +1 more
similarity 0.62
Abstract

Event-based vision has emerged as a promising paradigm for energy-aware artificial intelligence (AI), offering sparse, low-latency visual signals that reduce redundant data processing and support sustainable edge computing. However, the asynchronous and noise-prone nature of event streams creates challenges for conventional deep learning models, which are often too computationally intensive for low-power embedded platforms. This work presents a compact and configurable event-driven autoencoder that efficiently compresses neuromorphic data while preserving essential spatiotemporal structure for downstream inference. The architecture integrates lightweight convolutional encoding with robust performance under adaptive event thresholding and a minimal classifier head, enabling substantial reductions in computational cost without degrading recognition fidelity. Extensive evaluations on the Smart Event Face Dataset (SEFD) and Event-Based Crossing Dataset (EBCD) show that the proposed framework achieves competitive or superior accuracy compared to YOLOv9 while requiring up to 35.6$\times$ fewer parameters. To assess real-world sustainability, the model is deployed on resource-constrained hardware: a Raspberry Pi 4B and a NVIDIA Jetson Nano. On NVIDIA Jetson Nano, it delivers real-time throughput of 44.8 FPS. On a Raspberry Pi 4B CPU, the 50\% autoencoder classifier consumes 16.19 J for the evaluated inference workload, corresponding to approximately 726.3$\times$ lower energy consumption than YOLOv9 under the same evaluation protocol. These results demonstrate the potential of compact event-driven models to advance environmentally conscious, low-power AI systems for high-speed perception in autonomous, mobile, and embedded computing environments.

0.24

A Hardware-Aware Comprehensive Study of Edge Vision Deployment with A Unified Hardware-Model-Runtime Mapping Framework

cs.CV ·2026-11-18 ·Le Duc An, Le Duc Thanh, Vo Hoai Viet
surveybenchmark similarity 0.61
Abstract

The rapid growth of deep learning has driven the deployment of computer vision directly on resource-constrained edge devices. However, the extreme heterogeneity of edge hardware architectures poses major challenges in selecting and designing suitable vision models. This survey bridges the gap between edge hardware constraints, model architectures, and deployment software toolchains. We establish a comprehensive taxonomy classifying edge hardware into three distinct tiers: mid-range devices (GPUs and dedicated NPUs or TPUs), dedicated embedded MPU or SoC processors, and microcontrollers (MCUs). We aggregate and analyze multi-source benchmark results for image classification and object detection across the computing spectrum, spanning from tens of watts down to milliwatt-scale bare-metal MCUs. Based on these empirical findings, we propose a two-tiered hardware-to-model mapping framework that provides concrete model selection matrices across performance priorities (Speed, Balanced, Accuracy) and actionable architectural design principles (peak SRAM budgeting, resolution-first scaling, and algorithm-compiler co-design). Finally, we highlight critical deployment challenges including toolchain fragmentation, operator incompatibility, and Vision Transformer feasibility, and outline promising future research directions in on-device adaptation and sustainable Edge AI.

0.14

Event-Frame Fusion for Inter-Frame Segmentation via Event-Guided Motion

cs.CV ·2026-09-18 ·Dalia Hareb, Jean Martinet, Benoit Miramond, Elisabetta Chicca
published similarity 0.61
Abstract

Autonomous navigation requires precise and efficient semantic segmentation, yet existing frame-based approaches remain limited by motion blur, glare, latency, and the low temporal resolution (20-30 FPS) of conventional cameras, which leads to information loss between frames. Event cameras have emerged as an alternative sensing modality, capturing intensity changes asynchronously with high temporal resolution, high dynamic range, and sparse outputs. However, event-based algorithms still fall short of frame-based ones in accuracy, as most segmentation methods are designed for dense frame data. To overcome these limitations, we propose a hybrid vision architecture that combines conventional frame-based and event-based cameras. The system integrates two complementary components: (1) a compact Spiking Neural Network (SNN) with 42k parameters for motion estimation, and (2) a lightweight event-driven SNN with 0.84M parameters for frame-based semantic segmentation, which interpolates motion between frames to refine segmentation results. By predicting inter-frame segmentations, the framework achieves segmentation rates of up to 500 Hz with an energy consumption below 1.87 mJ per inference, while maintaining real-time GPU execution at frequencies up to 200 Hz. Additionally, our approach compensates for information loss in frames affected by blur or overexposure, enabling more robust perception in challenging conditions.

0.44

Parameter Efficient Continual Learning for Sparse Event-Based Transformers

cs.CV ·2026-08-27 ·Vaishnavi Nagabhushana, Kartikay Agrawal, Ayon Borthakur
similarity 0.60
Abstract

Robotic and edge intelligence systems operate in dynamic environments where data arrives continuously, requiring models to adapt while preserving previously learned knowledge under strict memory and energy constraints. While parameter-efficient fine-tuning has shown promise for continual learning with vision transformers, conventional architectures rely on dense computation and remain costly for real-world deployment. Sparse event-based vision transformers provide energy-efficient event-driven computation, yet their continual learning capabilities remain largely unexplored. We here introduce sLoTh, a parameter-efficient continual learning framework for pretrained sparse event-based (spiking) vision transformers. sLoTh freezes the backbone and restricts plasticity to scalable-efficient low-rank attention updates (seLoRA) and shared neuronal threshold modulation, enabling adaptation without replay buffers by updating less than 1% of model parameters. Experiments across CIFAR-100, Tiny-ImageNet, ImageNet-100, and ImageNet-R with up to 100 tasks demonstrate competitive rehearsal-free performance in class-incremental learning and online continual learning, while enabling approximately 6.5x lower energy consumption than conventional dense vision transformers.

0.19

Hardware-Aware Learned Representation Compression for Distributed In-Sensor Vision

cs.LG cs.AIcs.AR ·2026-09-12 ·Chengwei Zhou, Abu Masum, Xuming Chen, Mehran Moghadam, Sreetama Sarkar +5 more
published similarity 0.60
Abstract · Under submission at IEEE Transactions on Emerging Topics in Computing

In-sensor computing reduces the cost of transmitting high-resolution image data by performing early-stage processing near the sensor. However, the logic chip integrated with a CMOS image sensor (CIS) is tightly constrained in compute and memory, limiting conventional deep neural network partitioning. We present OASIS, a distributed in-sensor vision framework that uses a lightweight encoder to generate compact, task-relevant representations before off-chip transmission. The encoder is trained end-to-end using task, entropy, and reconstruction objectives, while the decoder is used only during training. OASIS supports two complementary deployment paths. The first applies 4-bit quantization and Huffman coding while preserving the spatial structure required by classification and dense-prediction tasks. The second uses Sobol-based hyperdimensional computing (HDC) to transform the encoder latent into a fixed-dimensional binary hypervector for associative-memory classification. For the SwinViT-based VWW model, mapping a $3\times3\times8$ latent to a 64-dimensional hypervector provides an additional $1.77\times$ communication reduction with less than one percentage point of accuracy loss relative to the 128-dimensional configuration, yielding an overall $18{,}816\times$ reduction compared with raw 8-bit image transmission. We implement the digital near-sensor pipeline on an AMD Xilinx Zynq UltraScale+ FPGA and characterize it using direct board-level power measurements and Vivado post-implementation analysis, together with circuit-simulated CIS models and a 7-nm ASIC projection. Across visual wake-word classification, hand tracking, and eye tracking, OASIS reduces total system energy by approximately $2\times$-$4.5\times$ while maintaining competitive accuracy, demonstrating a practical hardware-algorithm co-design path for communication-efficient in-sensor vision.

0.21

EcoVLA: Energy-Efficient Device-Edge Co-Inference for Vision-Language-Action Models under Real-Time Constraints

cs.AI cs.RO ·2026-08-16 ·Ao Zhou, Bo Dai, Le Yu, Xingyu Liu, Zeyu Hao +3 more
published similarity 0.60
Abstract · Accepted by APPT 2026

Vision-Language-Action (VLA) models have emerged as a promising foundation for Embodied AI, but their high inference cost poses significant challenges for deployment in robotic systems. In practice, on-device inference is constrained by limited compute capacity and energy budgets, struggling to simultaneously satisfy real-time control and energy efficiency requirements. Alternatively, offloading the inference workload to an edge server is susceptible to fluctuations in system conditions, introducing unpredictable latency risks. Device-edge co-inference offers a promising solution, but systematic research tailored to VLA models remains scarce, particularly a unified co-inference framework that jointly addresses real-time constraints and system-level energy efficiency. Thus, we propose EcoVLA, an adaptive device-edge co-inference framework for VLA models that maximizes system energy efficiency under real-time constraints. EcoVLA first introduces a unified stage-level abstraction over different VLA paradigms, establishing an architecture-agnostic co-inference design space. It then formulates a joint device-edge-network latency and energy prediction model to enable rapid runtime evaluation of candidate co-inference schemes. Building on this, EcoVLA continuously selects the energy-optimal scheme satisfying real-time constraints with millisecond-level overhead, adapting to runtime variations in network and system states. Furthermore, EcoVLA incorporates a lightweight transmission mechanism for inter-stage intermediate tensors to reduce the communication overhead incurred by cross-device collaboration. Experimental results across VLA models show that EcoVLA improves system energy efficiency by up to 236% over existing co-inference approaches under a 20 Hz action output frequency constraint, while consistently maintaining SLO satisfaction under dynamic network and edge workload conditions.

0.56

StickFigure: Enabling Pose-Only IoT Cameras for Privacy-Preserving Edge Vision

cs.CV ·2026-10-25 ·Aveline Xiaoyuan Han, Chenshu Wu
similarity 0.59
Abstract · 14 pages, 9 figures

Indoor IoT cameras can support assisted living and activity-aware spaces, but exporting raw RGB frames raises privacy concerns by exposing facial, clothing, and household details that body-motion tasks often do not require. We present StickFigure, a pose-only IoT camera system that, during real-time monitoring, keeps raw frames local and ephemeral while exporting only compact skeleton streams sufficient for downstream human activity recognition (HAR). While pose estimation has matured on GPUs, extracting accurate pose streams on resource-constrained IoT cameras remains difficult. To overcome these challenges and enable on-device pose streams on (almost) any IoT camera, we present two core designs in StickFigure: an activation-aware pose backbone that allocates channel capacity after spatial downsampling and a lightweight hierarchical MLP refiner that selectively corrects elbow and wrist coordinates using intermediate visual features and kinematic context. We fully implement StickFigure and evaluate it on public benchmarks and real-world deployment. Compared with state-of-the-art MCU pose models, StickFigure achieves the highest pose accuracy and downstream HAR utility on both NTU RGB+D and Penn Action, while using 96.5% fewer parameters and 99.3% fewer MACs per frame than RTMPose-S-based baselines, achieving 0.107 s p95 latency on a representative STM32H753 MCU. We believe StickFigure establishes a new operating point for privacy-aware edge vision on massive IoT cameras.

0.19