CS Paper Radar

Spicing up Genetic Netlist Generation with LLMs

Stefan Uhlich, Yağız Gençer, Andrea Bonetti, Arun Venkitaraman, Chia-Yu Hsieh, Eisaku Ohbuchi, Lorenzo Servadei

cs.NE cs.ARcs.LG ·submitted 2026-08-24 14:34 UTC · v1
publishedbenchmark

Abstract

Analog circuit topology synthesis remains challenging because useful designs occupy a tiny fraction of a combinatorial search space, and small structural changes can induce highly nonlinear changes in behavior. Evolutionary algorithms are attractive because they can optimize over discrete circuit topologies using only black-box evaluations, but they often require many SPICE simulations and may converge prematurely. We introduce LLM-SPICEMixer, a hybrid synthesis framework that augments genetic netlist generation with IGEL (Inspiration-Guided Evolution with LLMs), an LLM-based proposal operator. During search, IGEL prompts an LLM with high-performing circuits from the elite set and instructs it to generate a new SPICE netlist, which is then evaluated by SPICE and selected using the same reward mechanism as conventional genetic operators. Thus, the LLM contributes structured topology proposals while simulation remains the source of truth. We evaluate LLM-SPICEMixer on a challenging benchmark task: synthesizing transistor-level circuits that implement a discriminant function for Iris classification. Compared with the genetic framework without LLM guidance, LLM-SPICEMixer improves the median final training reward by 8.4% and the median validation-selected test reward by 8.8%. The best validation-selected circuit achieves 93.3% test accuracy at the nominal tt corner and 85.9% average test accuracy across 17 process, voltage, and temperature corners.

Comment
Accepted for MLCAD 2026, Extended Version
DOI
10.1145/3831599.3840324

Closest papers

Nearest neighbours by meaning across the whole index.

Delta-Seeker: Closed-Loop Generative Search for Novel Circuit Design Discovery

eess.SY ·2026-10-30 ·Dinithi Jayasuriya, Devangshu Dutta, Aravind Saravanan, Nilesh Ahuja, Amanda Rios +1 more
similarity 0.63
Abstract

Generative models are increasingly used for circuit synthesis and optimization by proposing topologies, sizing devices, and exploring large design spaces. We investigate whether they can instead support design discovery, where generated structures must depart from known designs while producing reproducible electrical behavior. We propose Delta-Seeker, a closed-loop circuit search framework that combines discrete diffusion for topology generation and mutation with structural checking, SPICE-in-the-loop sizing, Pareto selection, and feedback from prior search outcomes. The search controller uses progress and recurring structural failures to allocate evaluation effort and steer subsequent topology generation, while independent re-sizing and operating-corner analysis are performed only after search. In generator-only experiments, cross-generation feedback increases structurally valid children from 143 to 945 and reduces the faulty-candidate fraction from 0.925 to 0.761. In op-amp topology discovery at matched sizing cost, Delta-Seeker yields 54 designs that remain feasible in at least three of four independent re-sizings and 18 that additionally pass device-level checks and supply-temperature corner analysis, compared with 38 and 10 under fixed control. Removing cross-generation memory reduces independently robust discoveries from 54 to 43 and seven-corner robust discoveries from 40 to 27. In DC-DC converter search, nearest-parent analysis identifies a corpus-absent topology whose generated switching current path changes its nearest training-corpus parent from infeasible at all four operating corners to feasible at all four, while increasing median efficiency from 31.2% to 98.96%. These results show that closed-loop generative search can support circuit discovery beyond structural novelty by identifying new topologies with independently verified changes in circuit operation.

0.33

CircuitsDNA: Discovering Unconventional Multi-Accuracy Arithmetic Circuits via Evolutionary Synthesis

cs.NE ·2026-09-01 ·Ruichen Qi, Junyi Luo, Xinting Jiang, Quan Cheng, Gregory Kielian +3 more
similarity 0.62
Abstract

Emerging edge AI workloads increasingly require arithmetic units that can trade computational accuracy for efficiency on demand. However, existing approximate arithmetic circuits are typically fixed-accuracy or rely on predefined structures for runtime configurability. This work introduces CircuitsDNA, an evolutionary framework that automatically evolves accuracy-configurable arithmetic circuits supporting multiple accuracy modes within a single circuit. It integrates three key features: 1) multi-threshold verifiability miter to enforce mode-specific accuracy requirements, 2) resource-limited verifiability-driven search to reduce verification overhead without sacrificing correctness, enabling efficient exploration of large circuit design, and 3) feedback-driven adaptive mutation to prioritize effective structural modifications and accelerate search convergence. Experimental results show that the 8-bit multiplier variants synthesized in 28-nm CMOS reduce the area-power product by up to 56% on INT8 DNN workload and 93% under exhaustive activity, compared with an exact 8-bit multiplier. Across CNNs and DeiTs, the accuracy loss relative to FP32 remains below 2% after fine-tuning under worst-case error (WCE) budgets of at most 1%. CircuitsDNA eliminates all search stalls observed in conventional methods across 8/12/16-bit multipliers, while adaptive mutation provides up to 1.33 times faster convergence than its non-adaptive counterpart.

0.25

AnalogScout: Simulation-Efficient PVT-Aware Analog Sizing with LLM Agents

cs.AR cs.AIcs.LG ·2026-10-27 ·Yichen Long, Keren Zhu
similarity 0.61
Abstract · 5 pages, 5 figures, 1 table. Submitted to IEEE ISCAS 2027

Analog device sizing must satisfy all specifications across process, voltage, and temperature (PVT) corners to ensure tape-out success, but simulating every candidate at all corners dominates the sizing time and slows design iteration. Conventional surrogate-based optimizers search the sizing space directly, while recent large language model (LLM) agents add circuit knowledge to designs but still delegate the sizes to global optimizers. Both learn the circuit response from repeated multi-corner SPICE simulations and optimize on top of it, which becomes expensive under a limited simulation budget. Providing an agent with reusable verified designs and sizing sub-blocks analytically could save most of this budget. We propose AnalogScout, a simulation-efficient PVT-aware sizing framework driven by an LLM agent. Combining elite-design reuse, analytic gm/Id local sizing and global refinement under full-corner verification, AnalogScout reduces power by 43.3% relative to the evolution strategy CMA-ES at an equal budget of 16k simulations on three SKY130 OTAs of increasing complexity, and reaches the final CMA-ES power after 7.0% of that budget. It also attains lower power than Bayesian optimization on all three OTAs and than two re-implemented LLM-driven flows on the two OTAs where they were tested.

0.21

SAFTAC: Simulation-Augmented Fine-Tuning of Open-Source LLMs for Analog Circuit Design

cs.AR cs.AI ·2026-11-05 ·Junsheng Huang, Yifan Sun, Zhuoer Zhang, Ning Wei, Yening Liu +5 more
top venue similarity 0.61
Abstract · Accepted to NeurIPS 2026

Circuit design for analog integrated circuits (ICs) is challenging because circuit topology, device sizing, and circuit performance are tightly coupled. Existing large language model (LLM)-based methods either rely on inference-time correction around frozen models or train on limited circuit types without directly using simulation outcomes as training signals. A key bottleneck is that existing datasets do not provide sufficient task information for training LLMs on end-to-end specification-conditioned design. To fill this gap, we first construct a large-scale simulation-grounded dataset with 8,626 design tasks across 10 different types of analog circuits, where each task includes a textual description, labeled I/O ports, loading condition, target specifications, a testbench, and a reference netlist. Using this dataset, we present SAFTAC, a simulation-augmented fine-tuning framework that trains LLMs to generate and revise analog circuit design. SAFTAC combines three-stage supervised fine-tuning, which progressively builds the capabilities required for analog circuit design and feedback-guided correction, with simulation feedback-augmented reinforcement fine-tuning, which further optimizes models using simulation-grounded rewards. We evaluate SAFTAC under single-pass generation and two-pass generation with simulation feedback, showing improvements over the strongest closed-source LLM by 15.9% and 7.8%, respectively.

0.39

From Generation to Discovery: Diffusion Mutation Kernels for Circuit and Physical Design

eess.SY ·2026-08-27 ·Dinithi Jayasuriya, Aravind Saravanan, Nilesh Ahuja, Amanda Rios, Amit Trivedi
similarity 0.60
Abstract

Generation and discovery are different problems. A generative model trained on valid artifacts reproduces a distribution, whereas discovery must produce artifacts that lie outside the observed corpus, satisfy hard structural constraints, and improve on established designs under evaluation that the model cannot influence. We introduce a diffusion-based discovery framework. Unlike conventional generative models that sample from learned distributions, it learns transition operators that transform existing artifacts into new candidates. Controlled partial re-noising followed by denoising defines a diffusion mutation kernel, a learned transition distribution that preserves the structural regularities of feasible designs while moving between regions of the design space. The learned model supplies feasibility structure only, and all correctness and performance judgments remain with external engineering tools. Intermediate diffusion trajectories are additionally monitored under a conformal risk budget so that unpromising candidates are discarded before expensive evaluation. We evaluate the framework on three electronic design spaces, an environment that supplies rigorous non-differentiable evaluators in the form of simulation, formal equivalence checking, and industrial physical implementation. The framework discovers 32-bit prefix adders that are formally verified equivalent to addition over all 2^64 input pairs and reduce delay by 17% and area by 18% relative to Kogge-Stone under a placed-and-timed flow; seven independently re-simulated amplifier topologies absent from the training corpus, spanning gains of 21.9-66.1 dB and bandwidths of 72.9 kHz-207 MHz; and macro placements on held-out netlists reaching 0.68x wirelength of an industrial placer.

0.45

Evolutionary One-Step Generators: Fast and Diverse Sampling for Discrete Design

cs.LG cs.NE ·2026-10-06 ·Marcus Vukojevic, Erik Nielsen, Veronica Lachi, Andrea Passerini, Giovanni Iacca
similarity 0.60
Abstract

Several discrete design tasks, such as molecular discovery, require diverse collections of useful candidates at low computational cost. High validity alone does not guarantee a useful candidate library: repeatedly generating the same valid structures leaves few distinct alternatives. Training for both feasibility and diversity is challenging because many relevant criteria can only be evaluated after hard decoding. To address this challenge, we propose EGO (Evolutionary Generators with One-step inference), a framework for training compact generators directly on discrete outputs. The method combines distribution matching with structural constraints and optional diversity or history-dependent rewards, using antithetic low-rank evolution strategies without requiring criterion-specific differentiable surrogates. Once trained, the generator produces the entire graph in a single neural-network evaluation. On molecular generation benchmarks, our compact generator achieves over $50\times$ the valid-and-unique yield per estimated dense operation compared to recent one-step flow-map baselines while retaining high chemical validity. In scaffold completion, EGO achieves an observed $44.3\times$ speedup over MoLeR in generation to SMILES and produces approximately $10\times$ as many filter-passing proposals within matched time budgets for generation and screening. Beyond chemistry, EGO produces $1.54\times$ as many distinct held-out elite architectures as relaxed gradient training on NAS-Bench-101. The low generation cost may enable real-time candidate generation across discrete design tasks, supporting interactive exploration of constrained design spaces and rapid construction of candidate sets for downstream evaluation.

0.22

PINNForge: Execution-Grounded Evolutionary Design of Physics-Informed Neural Networks

cs.AI ·2026-09-19 ·Mingyang Yu, Xu Yang, Jun Zhang, Jing Xu, Keqian Li
similarity 0.59
Abstract

Physics-informed neural networks (PINNs) require coordinated choices across representation, architecture, sampling, constraints, loss construction, and optimization, yet effective configurations can vary substantially across partial differential equations (PDEs). Existing automated design methods search over these choices, but training outcomes are still used primarily to rank candidates rather than to inform subsequent designs. We develop PINNForge, an execution-grounded large language model (LLM)-driven evolutionary framework that treats observed PINN training behavior as a cross-generation design signal. PINNForge initializes diverse configurations from PDE-related prior knowledge, executes them, retains globally strong configurations, and feeds their execution evidence and accumulated run-level experience back to the LLM. The LLM then revises and recombines coupled design components or explores new combinations within a generate--execute--evaluate--evolve loop. Across 25 PDE benchmarks, PINNForge achieves the lowest mean MSE on 24 tasks among RoPINN, PINNsFormer, PINNsAgent, and PINNForge. Removing knowledge guidance, execution feedback, or evolutionary search increases the median task-wise MSE ratio to 3.74$\times$, 12.10$\times$, and 10.10$\times$, respectively, relative to full PINNForge.

0.14

EvoTreeNAD: Genealogy-Guided Evolution for LLM-Driven Neural Architecture Discovery

cs.NE cs.LG ·2026-09-24 ·Lishan Yu, Derek Jiu, Qizhen Lan, Xiaoqian Jiang
similarity 0.59
Abstract · 31 pages, 5 figures, including appendices

AI-driven scientific discovery accelerates research by autonomously developing solutions and designs. Large language model (LLM) agents support this process through iterative generation and evaluation. Yet these iterations alone do not ensure cumulative progress or establish which directions to pursue next. Costly evaluation further constrains the scope of exploration. Neural architecture discovery brings these challenges together, coupling open-ended design with resource-intensive experimentation. We introduce EvoTreeNAD, a genealogy-guided evolutionary algorithm that constructs trainable architectures without a supplied seed or a hand-specified search space. Starting from an empty root, it grows a persistent genealogy in which each new node represents a complete architecture. Top-percentile values computed from each node and its descendants guide lineage selection. Using the selected design history, an Idea Agent proposes a variant and a Code Agent implements it. Each evaluated variant becomes a child node, expanding the genealogy while providing evidence for subsequent lineage selection. Our theoretical analysis establishes the existence of stationary variation regimes as the genealogy grows. Under specified variation assumptions, sustained top-percentile family values quantify the probability of generating high-reward architectures in these regimes. EvoTreeNAD discovers architectures that outperform the compared NAS and NAD baselines, achieving CIFAR-10/100 test errors of $2.05{\pm}0.06\%$ and $15.09{\pm}0.22\%$. On all six MedMNIST-v2 tasks, the discovered architectures surpass the strongest listed baselines. A controlled CIFAR-10 study further shows that EvoTreeNAD outperforms direct generation, best-of-$N$ greedy continuation, and full-family-mean routing.

0.47