CS Paper Radar

Delta-Seeker: Closed-Loop Generative Search for Novel Circuit Design Discovery

Dinithi Jayasuriya, Devangshu Dutta, Aravind Saravanan, Nilesh Ahuja, Amanda Rios, Amit Trivedi

eess.SY ·submitted 2026-10-30 04:04 UTC · v1

Abstract

Generative models are increasingly used for circuit synthesis and optimization by proposing topologies, sizing devices, and exploring large design spaces. We investigate whether they can instead support design discovery, where generated structures must depart from known designs while producing reproducible electrical behavior. We propose Delta-Seeker, a closed-loop circuit search framework that combines discrete diffusion for topology generation and mutation with structural checking, SPICE-in-the-loop sizing, Pareto selection, and feedback from prior search outcomes. The search controller uses progress and recurring structural failures to allocate evaluation effort and steer subsequent topology generation, while independent re-sizing and operating-corner analysis are performed only after search. In generator-only experiments, cross-generation feedback increases structurally valid children from 143 to 945 and reduces the faulty-candidate fraction from 0.925 to 0.761. In op-amp topology discovery at matched sizing cost, Delta-Seeker yields 54 designs that remain feasible in at least three of four independent re-sizings and 18 that additionally pass device-level checks and supply-temperature corner analysis, compared with 38 and 10 under fixed control. Removing cross-generation memory reduces independently robust discoveries from 54 to 43 and seven-corner robust discoveries from 40 to 27. In DC-DC converter search, nearest-parent analysis identifies a corpus-absent topology whose generated switching current path changes its nearest training-corpus parent from infeasible at all four operating corners to feasible at all four, while increasing median efficiency from 31.2% to 98.96%. These results show that closed-loop generative search can support circuit discovery beyond structural novelty by identifying new topologies with independently verified changes in circuit operation.

Closest papers

Nearest neighbours by meaning across the whole index.

From Generation to Discovery: Diffusion Mutation Kernels for Circuit and Physical Design

eess.SY ·2026-08-27 ·Dinithi Jayasuriya, Aravind Saravanan, Nilesh Ahuja, Amanda Rios, Amit Trivedi
similarity 0.64
Abstract

Generation and discovery are different problems. A generative model trained on valid artifacts reproduces a distribution, whereas discovery must produce artifacts that lie outside the observed corpus, satisfy hard structural constraints, and improve on established designs under evaluation that the model cannot influence. We introduce a diffusion-based discovery framework. Unlike conventional generative models that sample from learned distributions, it learns transition operators that transform existing artifacts into new candidates. Controlled partial re-noising followed by denoising defines a diffusion mutation kernel, a learned transition distribution that preserves the structural regularities of feasible designs while moving between regions of the design space. The learned model supplies feasibility structure only, and all correctness and performance judgments remain with external engineering tools. Intermediate diffusion trajectories are additionally monitored under a conformal risk budget so that unpromising candidates are discarded before expensive evaluation. We evaluate the framework on three electronic design spaces, an environment that supplies rigorous non-differentiable evaluators in the form of simulation, formal equivalence checking, and industrial physical implementation. The framework discovers 32-bit prefix adders that are formally verified equivalent to addition over all 2^64 input pairs and reduce delay by 17% and area by 18% relative to Kogge-Stone under a placed-and-timed flow; seven independently re-simulated amplifier topologies absent from the training corpus, spanning gains of 21.9-66.1 dB and bandwidths of 72.9 kHz-207 MHz; and macro placements on held-out netlists reaching 0.68x wirelength of an industrial placer.

0.45

Spicing up Genetic Netlist Generation with LLMs

cs.NE cs.ARcs.LG ·2026-08-24 ·Stefan Uhlich, Yağız Gençer, Andrea Bonetti, Arun Venkitaraman, Chia-Yu Hsieh +2 more
publishedbenchmark similarity 0.63
Abstract · Accepted for MLCAD 2026, Extended Version

Analog circuit topology synthesis remains challenging because useful designs occupy a tiny fraction of a combinatorial search space, and small structural changes can induce highly nonlinear changes in behavior. Evolutionary algorithms are attractive because they can optimize over discrete circuit topologies using only black-box evaluations, but they often require many SPICE simulations and may converge prematurely. We introduce LLM-SPICEMixer, a hybrid synthesis framework that augments genetic netlist generation with IGEL (Inspiration-Guided Evolution with LLMs), an LLM-based proposal operator. During search, IGEL prompts an LLM with high-performing circuits from the elite set and instructs it to generate a new SPICE netlist, which is then evaluated by SPICE and selected using the same reward mechanism as conventional genetic operators. Thus, the LLM contributes structured topology proposals while simulation remains the source of truth. We evaluate LLM-SPICEMixer on a challenging benchmark task: synthesizing transistor-level circuits that implement a discriminant function for Iris classification. Compared with the genetic framework without LLM guidance, LLM-SPICEMixer improves the median final training reward by 8.4% and the median validation-selected test reward by 8.8%. The best validation-selected circuit achieves 93.3% test accuracy at the nominal tt corner and 85.9% average test accuracy across 17 process, voltage, and temperature corners.

0.38

AnalogScout: Simulation-Efficient PVT-Aware Analog Sizing with LLM Agents

cs.AR cs.AIcs.LG ·2026-10-27 ·Yichen Long, Keren Zhu
similarity 0.62
Abstract · 5 pages, 5 figures, 1 table. Submitted to IEEE ISCAS 2027

Analog device sizing must satisfy all specifications across process, voltage, and temperature (PVT) corners to ensure tape-out success, but simulating every candidate at all corners dominates the sizing time and slows design iteration. Conventional surrogate-based optimizers search the sizing space directly, while recent large language model (LLM) agents add circuit knowledge to designs but still delegate the sizes to global optimizers. Both learn the circuit response from repeated multi-corner SPICE simulations and optimize on top of it, which becomes expensive under a limited simulation budget. Providing an agent with reusable verified designs and sizing sub-blocks analytically could save most of this budget. We propose AnalogScout, a simulation-efficient PVT-aware sizing framework driven by an LLM agent. Combining elite-design reuse, analytic gm/Id local sizing and global refinement under full-corner verification, AnalogScout reduces power by 43.3% relative to the evolution strategy CMA-ES at an equal budget of 16k simulations on three SKY130 OTAs of increasing complexity, and reaches the final CMA-ES power after 7.0% of that budget. It also attains lower power than Bayesian optimization on all three OTAs and than two re-implemented LLM-driven flows on the two OTAs where they were tested.

0.21

K-TRAIL: Simulator-Guided Generative Design of EM/RF Circuits

cs.LG ·2026-09-19 ·Piyush Saha, Evan Newell, Hanna O'Leary, Arun Natarajan, Alireza Aghasi
similarity 0.60
Abstract

Inverse design of RF and electromagnetic (EM) circuits is challenging because the relationship between circuit layout and electrical response is non-unique, and full-wave simulation is computationally expensive. This paper presents K-TRAIL, a simulator-guided generative framework for automated EM/RF circuit synthesis. K-TRAIL combines diffusion-based layout generation with derivative-free ensemble Kalman guidance, allowing feedback from a black-box EM simulator to refine candidate layouts during generation without requiring adjoint sensitivities or differentiable solver models. The framework supports both synthesis from prescribed S-parameter responses and synthesis directly from RF performance constraints. Experiments on multi-layer RFIC structures show that simulator-guided generation improves agreement with target responses and can identify structurally distinct layouts that satisfy circuit-level design requirements. The proposed approach provides a practical path toward generative, verification-aware RF circuit design while retaining the flexibility to explore diverse layout topologies.

0.52

SLIC: Reinforcement Fine-Tuning Small LMs for Multi-Turn Analog Circuit Optimization

cs.LG ·2026-11-10 ·Yan Xu, Zhengqi Gao, Ching-Yun Ko, Zhang-Wei Hong, Wenjie Lu +4 more
top venuebenchmarkcode/datahot direction similarity 0.60
Abstract · Accepted at NeurIPS 2026. 43 pages, 12 figures. Project page: https://hangroup.mit.edu/slic/

Analog integrated circuit (IC) design is a multi-turn, simulator-grounded engineering task that demands iterative reasoning over coupled performance tradeoffs, yet proprietary process design kits (PDKs) make hosted large language model workflows difficult to deploy in practical design settings. We present SLIC (Small LM Iterating on Circuits), a reinforcement fine-tuning framework that trains a 4B-scale, locally deployable language model for closed-loop analog circuit optimization. SLIC pairs structured circuit representations with discretized relative-update actions, domain- and success-gated multiobjective rewards, and Reward-Guided Rollout Steering (RGRS), which turns per-step simulator feedback into signals for both policy learning and online rollout construction in this sparse, highly constrained domain. We further release an open, goal-conditioned benchmark of 41 amplifier topologies with standardized protocols for in-distribution validation, held-out topology evaluation, and cross-technology-node transfer. Trained solely with open source 65 nm CMOS predictive technology models (PTM), SLIC-Random achieves 87.1% in-distribution four-specification Pass@1 within eight turns, surpassing the 763B DeepSeek-V4.1-Flash Think by 48.5 percentage points. Beyond the training distribution, SLIC-Softmax reaches 72.6% Pass@1 on held-out topologies, and the trained policies consistently transfer across five unseen technology nodes without additional fine-tuning. This transfer extends to a commercial TSMC 65 nm CMOS PDK, where SLIC-Random achieves 49.9% held-out-topology Pass@1, demonstrating practical deployment through local inference without transmitting proprietary data to external LLM services. Performance further scales with test-time simulator interactions, reaching up to 83.2% held-out-topology Pass@1 at a 32-turn budget.

0.52

NEMESIS2.0: LLM-Aided Netlist-Driven Performance Equation Modeling for Accelerated Analog Circuit Sizing

cs.AR ·2026-11-13 ·Subhadip Ghosh, Ramesh Harjani, Sachin S. Sapatnekar
code/data similarity 0.59
Abstract · This paper is under review in the IEEE Transactions on Computer-Aided Design of Integrated Circuits & Systems (TCAD) : 14 pages

This work presents NEMESIS2.0, an open-source LLM-aided framework that automatically derives equation-based performance models for analog circuits. The resulting equations provide fast, accurate surrogates for SPICE evaluation. To validate the method, equation-based models are developed for seven circuit test cases in a commercial 65nm CMOS technology, covering 15 metrics on five operational transconductance amplifier topologies, and six metrics on two dynamic comparator topologies. When tested on 1000 unseen variants of these seven designs, each corresponding to a different set of independently sampled transistor sizes, the accuracy is found to be within 5% of SPICE. To demonstrate use cases for NEMESIS2.0, the generated models are used as performance evaluators in multiple transistor sizers based on different population-based stochastic search optimizers. For each of the seven test cases, transistor sizing is performed for 100 different sets of performance specifications, with final SPICE simulation confirming that 83.3% of the resulting designs meet all specifications after a single sizing run. The rest fail to meet the specifications due to discrepancies between the model and SPICE, and require iterative resizing under tightened specifications; all such scenarios meet specifications within five iterations. Within the transistor sizers, this equation-based performance analysis evaluates ~400 design candidates per second, versus 0.14 candidates per second for SPICE-based evaluation, achieving 196-238x sizing runtime speedup, including final SPICE verification.

0.26

ATLAS: Adaptive TDA-guided Landscape-Aware Transistor Sizing

cs.AR ·2026-10-07 ·Youngmin Oh, Jihwan Won, Yuntae Park, Bosun Hwang, Suwan Kim
code/data similarity 0.58
Abstract

Analog transistor sizing, finding design parameters that simultaneously satisfy multiple performance specifications, is a labor-intensive bottleneck in circuit design. To support analog circuit experts, various automation methods have been proposed, including Bayesian optimization (BO), reinforcement learning (RL), and others. Yet existing methods are oblivious to the topological structure of a feasible design space, which can fragment into disconnected regions due to operating-regime transitions, conflicting specification trade-offs, and nonconvex device physics. This topological blindness causes the optimizer to converge within a single feasible region while missing others that may contain superior designs. To address this limitation, we propose ATLAS. a BO framework utilizing Topological Data Analysis (TDA). At each iteration, a Mapper graph is constructed over a surrogate-predicted feasible region to estimate connected regions, enabling topology-aware exploration from the very first iteration without any observed feasible points. A topological sensitivity score classifies candidates as bridge, frontier, or interior points, injecting a targeted exploration bonus into the acquisition function. Experiments on four analog circuit benchmarks in the GF180 and SKY130 processes demonstrate that \coin finds feasible designs with significantly fewer simulations than baselines, including RL and BO methods. To the best of our knowledge, this is the first work to apply topological data analysis to analog circuit design automation. The official implementation is publicly available on https://github.com/youngmin0oh/atlas.

0.44

Topology as a Design Variable: Joint Architecture-Sizing Optimization for SRAM

cs.LG ·2026-11-06 ·Can Wang, Junhao Ma, Yikai Wang, Shan Shen, Wei W. Xing
publishedcode/data similarity 0.57
Abstract · Accepted by ASPDAC2027

SRAM's power-performance-area-stability trade-off depends on bitcell topology, a discrete architectural choice that interacts non-separably with continuous transistor sizing. However, no open-source SRAM tool treats topology as an optimizable variable. OpenRAM generates SRAM layouts but performs no optimization, while OpenYield supports high-fidelity evaluation but restricts optimization to scalar sizing of a fixed 6T cell. OpenYieldV2 closes this gap through three integrated contributions. First, a fully parameterized compiler generates complete 6T and 10T SRAM macros with peripheral circuits and replica-bitline self-timing, enabling topology comparison under identical simulation conditions. Second, a few-shot TabPFN surrogate learns topology-dependent PPA responses with limited full-macro SPICE samples. Third, a coarse-to-refined multi-objective optimizer combines global exploration of discrete architectural choices with local refinement of continuous transistor sizes. Experiments across varying design conditions reveal a topology decision boundary that shifts with operating constraints rather than following a fixed design rule. Jointly optimizing across this boundary improves hypervolume by up to 17.3\% over the strongest single-topology baseline. OpenYieldV2 is open-source to support reproducible SRAM design research.

0.39