CS Paper Radar

SLIC: Reinforcement Fine-Tuning Small LMs for Multi-Turn Analog Circuit Optimization

Yan Xu, Zhengqi Gao, Ching-Yun Ko, Zhang-Wei Hong, Wenjie Lu, Tao Yu, Xin Zhang, Duane S. Boning, Ruonan Han

cs.LG ·submitted 2026-11-10 01:54 UTC · v1
top venuebenchmarkcode/data

Abstract

Analog integrated circuit (IC) design is a multi-turn, simulator-grounded engineering task that demands iterative reasoning over coupled performance tradeoffs, yet proprietary process design kits (PDKs) make hosted large language model workflows difficult to deploy in practical design settings. We present SLIC (Small LM Iterating on Circuits), a reinforcement fine-tuning framework that trains a 4B-scale, locally deployable language model for closed-loop analog circuit optimization. SLIC pairs structured circuit representations with discretized relative-update actions, domain- and success-gated multiobjective rewards, and Reward-Guided Rollout Steering (RGRS), which turns per-step simulator feedback into signals for both policy learning and online rollout construction in this sparse, highly constrained domain. We further release an open, goal-conditioned benchmark of 41 amplifier topologies with standardized protocols for in-distribution validation, held-out topology evaluation, and cross-technology-node transfer. Trained solely with open source 65 nm CMOS predictive technology models (PTM), SLIC-Random achieves 87.1% in-distribution four-specification Pass@1 within eight turns, surpassing the 763B DeepSeek-V4.1-Flash Think by 48.5 percentage points. Beyond the training distribution, SLIC-Softmax reaches 72.6% Pass@1 on held-out topologies, and the trained policies consistently transfer across five unseen technology nodes without additional fine-tuning. This transfer extends to a commercial TSMC 65 nm CMOS PDK, where SLIC-Random achieves 49.9% held-out-topology Pass@1, demonstrating practical deployment through local inference without transmitting proprietary data to external LLM services. Performance further scales with test-time simulator interactions, reaching up to 83.2% held-out-topology Pass@1 at a 32-turn budget.

Comment
Accepted at NeurIPS 2026. 43 pages, 12 figures. Project page: https://hangroup.mit.edu/slic/

Closest papers

Nearest neighbours by meaning across the whole index.

SAFTAC: Simulation-Augmented Fine-Tuning of Open-Source LLMs for Analog Circuit Design

cs.AR cs.AI ·2026-11-05 ·Junsheng Huang, Yifan Sun, Zhuoer Zhang, Ning Wei, Yening Liu +5 more
top venue similarity 0.79
Abstract · Accepted to NeurIPS 2026

Circuit design for analog integrated circuits (ICs) is challenging because circuit topology, device sizing, and circuit performance are tightly coupled. Existing large language model (LLM)-based methods either rely on inference-time correction around frozen models or train on limited circuit types without directly using simulation outcomes as training signals. A key bottleneck is that existing datasets do not provide sufficient task information for training LLMs on end-to-end specification-conditioned design. To fill this gap, we first construct a large-scale simulation-grounded dataset with 8,626 design tasks across 10 different types of analog circuits, where each task includes a textual description, labeled I/O ports, loading condition, target specifications, a testbench, and a reference netlist. Using this dataset, we present SAFTAC, a simulation-augmented fine-tuning framework that trains LLMs to generate and revise analog circuit design. SAFTAC combines three-stage supervised fine-tuning, which progressively builds the capabilities required for analog circuit design and feedback-guided correction, with simulation feedback-augmented reinforcement fine-tuning, which further optimizes models using simulation-grounded rewards. We evaluate SAFTAC under single-pass generation and two-pass generation with simulation feedback, showing improvements over the strongest closed-source LLM by 15.9% and 7.8%, respectively.

0.39

CRAFT: Analog Circuit Design by Reasoning LLM Agents from Pre-Computed Lookup Tables

cs.AR ·2026-11-19 ·Hyunjun Park, Seungyub Han, Jason Jaesung Lee, Kahyun Kim, Soohyun Kim +4 more
similarity 0.69
Abstract · 7 pages, 9 figures, 2 tables

Automated analog circuit sizing methods, from black-box optimizers to recent large language model (LLM) agents, typically search the design space with a SPICE simulator in the loop, whereas an experienced designer works out a design by hand analysis. This paper presents CRAFT, a flow in which an LLM agent designs a given topology by calculation, as a designer does, and without an initial sizing. The agent works only through DeX, a service that uses pre-computed lookup tables to provide device characteristics and to solve the whole netlist for its operating point and small-signal response. It thus designs without SPICE, and every final design is verified independently in HSPICE. We test CRAFT on four circuits in a commercial 28 nm process; the largest is a 37-transistor three-stage amplifier with 53 design variables, 20 specifications and 74 saturation constraints. With Claude Opus 5.5, CRAFT meets every specification and constraint in all 20 runs, five per circuit. On that amplifier, with DeX in place of HSPICE and an identical request for both, the same agent passes in 10 of 10 runs instead of 6 of 10 within an hour and is 2.0x faster at the median.

0.24

AgenticSizing: A Large Language Model-based Multi-Agent Framework for Analog Circuit Sizing

cs.AI cs.AR ·2026-09-22 ·Yijia Hao, Pratibha Verma, Dongxu Guo, Cristian Sestito, Michael O'Boyle +2 more
benchmarkcode/data similarity 0.67
Abstract

Analog circuit sizing remains a challenging and time-consuming task due to the large design space, strong performance trade-offs, and increasing circuit complexity in scaled technologies. Although recent large language model (LLM)-based methods show promise in improving sample efficiency and interpretability, existing approaches often lack explicit circuit-topology understanding and are mainly evaluated on relatively simple analog building blocks. This paper presents a multi-agent LLM-based framework for complex analog circuit sizing. The proposed framework first analyzes the circuit topology and decomposes the netlist into functional blocks and substructures. It also extracts lightweight design knowledge for reuse. Based on the extracted topology and knowledge, a planner coordinates multiple role-specialized sizing agents to update design variables and achieve global performance specifications. This workflow mimics the collaborative process of an expert analog design team and provides a structured, interpretable, and simulation-driven optimization procedure. The framework was validated on eight circuits, with the largest design containing up to 55 transistors and 60 sizing variables. Notably, for the LDO benchmark, the proposed method achieved a 60\% success rate with an average of 83 iterations, where classical optimizers failed to find feasible solutions. Further, ablation studies demonstrate that topology understanding, design-knowledge infusion, and agent specialization provide complementary benefits. The source code is available to support reproducibility.

0.39

AnalogPortBench: Benchmarking LLMs on Analog Circuit Porting

cs.AR cs.AI ·2026-10-21 ·Saeid Rajabi, Aly Moussa, Vishal Saxena, Chengmo Yang, Satwik Patnaik
benchmarkcode/data similarity 0.67
Abstract · 5 pages, 3 figures, 4 tables Code and data: https://github.com/saeidrajabii/AnalogPortBench

Analog circuit design still relies heavily on expert knowledge, and porting proven designs to new process nodes is a recurring bottleneck. As a lower supply reduces available voltage headroom, a working topology may require redesign or fail to meet specifications. While large language models (LLMs) have begun to generate and optimize analog circuits, existing benchmarks focus on one process node and assume feasible specifications. To bridge this gap, we introduce AnalogPortBench, a benchmark of 54 tasks for porting ten circuits, from current mirrors to telescopic amplifiers, from a 0.18 $μ$m process to the open-source SKY130 PDK. Tasks range from a direct port through a reduced supply and harder specifications to infeasible ones, and every feasible task has a reference design verified at five process corners. Evaluating six frontier LLMs at two reasoning levels, with and without simulation feedback, we find that models port simple circuits but rarely re-design headroom-sensitive amplifiers, seldom recognize infeasible specifications, and gain more from simulation feedback than from more samples or reasoning. Code and data are available at https://github.com/saeidrajabii/AnalogPortBench.

0.34

Simulation-Efficient Analog Circuit Yield Optimization via Monte Carlo Zeroth-Order Gradient Estimation

cs.CE ·2026-09-25 ·Liyan Tan, Yequan Zhao, Ben F. Jamroz, Ari Feldman, Zheng Zhang
theory similarity 0.66
Abstract

Yield optimization under process variation is expensive because each candidate design must be evaluated across many Monte Carlo SPICE samples. The resulting finite-sample yield is also piecewise constant in the design parameters, providing little local information for optimization. We introduce zeroth-order Monte Carlo stochastic gradient descent (ZO-MC-SGD), a black-box method that converts continuous specification margins into stochastic descent directions. Each update evaluates opposite design perturbations under shared process samples, allowing a small simulation batch to estimate a local direction without differentiating SPICE or fitting a global surrogate model. A Spearman rank-correlation test checks that the margin-based loss orders designs consistently with empirical yield. We prove that the estimator is unbiased for a Gaussian-smoothed surrogate and derive variance and sample-complexity bounds with no explicit dependence on process dimension. Across five analog circuit benchmarks with up to 30 design variables and 42 process variables, ZO-MC-SGD reaches a mean yield of 0.95 on four circuits within 50--200 simulations and the empirical yield ceiling on the fifth. Relative to the best of five black-box and learning-based baselines, it reduces the required simulation budget by up to a factor of eight.

0.34

AnalogScout: Simulation-Efficient PVT-Aware Analog Sizing with LLM Agents

cs.AR cs.AIcs.LG ·2026-10-27 ·Yichen Long, Keren Zhu
similarity 0.65
Abstract · 5 pages, 5 figures, 1 table. Submitted to IEEE ISCAS 2027

Analog device sizing must satisfy all specifications across process, voltage, and temperature (PVT) corners to ensure tape-out success, but simulating every candidate at all corners dominates the sizing time and slows design iteration. Conventional surrogate-based optimizers search the sizing space directly, while recent large language model (LLM) agents add circuit knowledge to designs but still delegate the sizes to global optimizers. Both learn the circuit response from repeated multi-corner SPICE simulations and optimize on top of it, which becomes expensive under a limited simulation budget. Providing an agent with reusable verified designs and sizing sub-blocks analytically could save most of this budget. We propose AnalogScout, a simulation-efficient PVT-aware sizing framework driven by an LLM agent. Combining elite-design reuse, analytic gm/Id local sizing and global refinement under full-corner verification, AnalogScout reduces power by 43.3% relative to the evolution strategy CMA-ES at an equal budget of 16k simulations on three SKY130 OTAs of increasing complexity, and reaches the final CMA-ES power after 7.0% of that budget. It also attains lower power than Bayesian optimization on all three OTAs and than two re-implemented LLM-driven flows on the two OTAs where they were tested.

0.21

PVTSizing 2.0: A Fast and Reliable Analog Circuit Sizing Operator for Agentic EDA Workflows

cs.AR cs.LG ·2026-11-17 ·Zichen Kong, Minghuan Song, Xiyuan Tang, Ziming Wei, Yi Zhong +1 more
similarity 0.65
Abstract · 10 pages, 4 figures, 5 tables

Analog circuit design automation requires both coordinated tool execution and efficient numerical search. Large language models (LLMs) offer new ways to organize tool execution, but finding one sizing that satisfies specifications across process, voltage, and temperature (PVT) corners remains costly. PVTSizing 2.0 addresses these needs through a human-agent workflow built around an independently usable numerical optimizer. An agent carries the designer's approved task through execution and result review. The optimizer reduces unnecessary training through loss-guided updates and uses critic-guided local refinement to explore additional candidates while accounting for cross-corner conflicts. An optional LLM adviser supplies parameter relationships to focus numerical search on circuit-informed directions, while the optimizer selects adjustment amplitudes and verifies their effects through simulation. Across four circuit benchmarks, the standalone optimizer completes all 40 runs and achieves a 7.3x speedup in overall mean runtime over the original PVTSizing, with a comparable mean sample count. In a separate study, the best tested knowledge-injection configuration further reduces mean runtime by 39.9% and simulation samples by 35.4% relative to the standalone optimizer.

0.21

Simulation-Aware In-Context Policy Improvement for LLM-Aided Analog Layout Refinement

cs.AI cs.RO ·2026-08-13 ·Bingyang Liu, Ziming Wei, Xiaohan Gao, David Z. Pan
publishedhighly cited similarity 0.65
Abstract · 7 pages, 3 figures. To appear in the Proceedings of the 2026 International Conference on LLM-Aided Design (ICLAD 2026)

Analog IC layout design remains a labor-intensive iterative process dominated by simulation-driven refinement. Although end-to-end layout generators accelerate initial placement and routing, they still require experts to manually tune layout optimization parameters with repeated post-layout simulations for stringent design specifications. While Bayesian Optimization (BO) is widely adopted for parameter tuning in analog IC design, at the layout level it typically requires hundreds to thousands of evaluations, each involving costly parasitic extraction and post-layout simulation, which makes it impractical. Recently, Large Language Models (LLMs) have demonstrated potential in improving the sample efficiency of such simulation-driven tuning. However, their restricted access to geometric layout context and design-specific heuristics limits their ability to manipulate the layout optimization process. In this paper, we propose a simulation-aware LLM multi-agent framework that performs in-context policy improvement (ICPI) by iteratively updating layout optimization parameters exposed by an analog layout generator through an act-observe-reflect loop on compact structured layout representations. Experiments on real-world analog circuits show that, with only tens of post-layout simulations, our approach improves post-layout performance over the generator's built-in heuristics and BO-based tuning method.

0.61