CS Paper Radar

Simulation-Efficient Analog Circuit Yield Optimization via Monte Carlo Zeroth-Order Gradient Estimation

Liyan Tan, Yequan Zhao, Ben F. Jamroz, Ari Feldman, Zheng Zhang

cs.CE ·submitted 2026-09-25 01:32 UTC · v1
theory

Abstract

Yield optimization under process variation is expensive because each candidate design must be evaluated across many Monte Carlo SPICE samples. The resulting finite-sample yield is also piecewise constant in the design parameters, providing little local information for optimization. We introduce zeroth-order Monte Carlo stochastic gradient descent (ZO-MC-SGD), a black-box method that converts continuous specification margins into stochastic descent directions. Each update evaluates opposite design perturbations under shared process samples, allowing a small simulation batch to estimate a local direction without differentiating SPICE or fitting a global surrogate model. A Spearman rank-correlation test checks that the margin-based loss orders designs consistently with empirical yield. We prove that the estimator is unbiased for a Gaussian-smoothed surrogate and derive variance and sample-complexity bounds with no explicit dependence on process dimension. Across five analog circuit benchmarks with up to 30 design variables and 42 process variables, ZO-MC-SGD reaches a mean yield of 0.95 on four circuits within 50--200 simulations and the empirical yield ceiling on the fifth. Relative to the best of five black-box and learning-based baselines, it reduces the required simulation budget by up to a factor of eight.

Closest papers

Nearest neighbours by meaning across the whole index.

AnalogScout: Simulation-Efficient PVT-Aware Analog Sizing with LLM Agents

cs.AR cs.AIcs.LG ·2026-10-27 ·Yichen Long, Keren Zhu
similarity 0.69
Abstract · 5 pages, 5 figures, 1 table. Submitted to IEEE ISCAS 2027

Analog device sizing must satisfy all specifications across process, voltage, and temperature (PVT) corners to ensure tape-out success, but simulating every candidate at all corners dominates the sizing time and slows design iteration. Conventional surrogate-based optimizers search the sizing space directly, while recent large language model (LLM) agents add circuit knowledge to designs but still delegate the sizes to global optimizers. Both learn the circuit response from repeated multi-corner SPICE simulations and optimize on top of it, which becomes expensive under a limited simulation budget. Providing an agent with reusable verified designs and sizing sub-blocks analytically could save most of this budget. We propose AnalogScout, a simulation-efficient PVT-aware sizing framework driven by an LLM agent. Combining elite-design reuse, analytic gm/Id local sizing and global refinement under full-corner verification, AnalogScout reduces power by 43.3% relative to the evolution strategy CMA-ES at an equal budget of 16k simulations on three SKY130 OTAs of increasing complexity, and reaches the final CMA-ES power after 7.0% of that budget. It also attains lower power than Bayesian optimization on all three OTAs and than two re-implemented LLM-driven flows on the two OTAs where they were tested.

0.21

NEMESIS2.0: LLM-Aided Netlist-Driven Performance Equation Modeling for Accelerated Analog Circuit Sizing

cs.AR ·2026-11-13 ·Subhadip Ghosh, Ramesh Harjani, Sachin S. Sapatnekar
code/data similarity 0.68
Abstract · This paper is under review in the IEEE Transactions on Computer-Aided Design of Integrated Circuits & Systems (TCAD) : 14 pages

This work presents NEMESIS2.0, an open-source LLM-aided framework that automatically derives equation-based performance models for analog circuits. The resulting equations provide fast, accurate surrogates for SPICE evaluation. To validate the method, equation-based models are developed for seven circuit test cases in a commercial 65nm CMOS technology, covering 15 metrics on five operational transconductance amplifier topologies, and six metrics on two dynamic comparator topologies. When tested on 1000 unseen variants of these seven designs, each corresponding to a different set of independently sampled transistor sizes, the accuracy is found to be within 5% of SPICE. To demonstrate use cases for NEMESIS2.0, the generated models are used as performance evaluators in multiple transistor sizers based on different population-based stochastic search optimizers. For each of the seven test cases, transistor sizing is performed for 100 different sets of performance specifications, with final SPICE simulation confirming that 83.3% of the resulting designs meet all specifications after a single sizing run. The rest fail to meet the specifications due to discrepancies between the model and SPICE, and require iterative resizing under tightened specifications; all such scenarios meet specifications within five iterations. Within the transistor sizers, this equation-based performance analysis evaluates ~400 design candidates per second, versus 0.14 candidates per second for SPICE-based evaluation, achieving 196-238x sizing runtime speedup, including final SPICE verification.

0.23

SLIC: Reinforcement Fine-Tuning Small LMs for Multi-Turn Analog Circuit Optimization

cs.LG ·2026-11-10 ·Yan Xu, Zhengqi Gao, Ching-Yun Ko, Zhang-Wei Hong, Wenjie Lu +4 more
top venuebenchmarkcode/data similarity 0.66
Abstract · Accepted at NeurIPS 2026. 43 pages, 12 figures. Project page: https://hangroup.mit.edu/slic/

Analog integrated circuit (IC) design is a multi-turn, simulator-grounded engineering task that demands iterative reasoning over coupled performance tradeoffs, yet proprietary process design kits (PDKs) make hosted large language model workflows difficult to deploy in practical design settings. We present SLIC (Small LM Iterating on Circuits), a reinforcement fine-tuning framework that trains a 4B-scale, locally deployable language model for closed-loop analog circuit optimization. SLIC pairs structured circuit representations with discretized relative-update actions, domain- and success-gated multiobjective rewards, and Reward-Guided Rollout Steering (RGRS), which turns per-step simulator feedback into signals for both policy learning and online rollout construction in this sparse, highly constrained domain. We further release an open, goal-conditioned benchmark of 41 amplifier topologies with standardized protocols for in-distribution validation, held-out topology evaluation, and cross-technology-node transfer. Trained solely with open source 65 nm CMOS predictive technology models (PTM), SLIC-Random achieves 87.1% in-distribution four-specification Pass@1 within eight turns, surpassing the 763B DeepSeek-V4.1-Flash Think by 48.5 percentage points. Beyond the training distribution, SLIC-Softmax reaches 72.6% Pass@1 on held-out topologies, and the trained policies consistently transfer across five unseen technology nodes without additional fine-tuning. This transfer extends to a commercial TSMC 65 nm CMOS PDK, where SLIC-Random achieves 49.9% held-out-topology Pass@1, demonstrating practical deployment through local inference without transmitting proprietary data to external LLM services. Performance further scales with test-time simulator interactions, reaching up to 83.2% held-out-topology Pass@1 at a 32-turn budget.

0.41

SAFTAC: Simulation-Augmented Fine-Tuning of Open-Source LLMs for Analog Circuit Design

cs.AR cs.AI ·2026-11-05 ·Junsheng Huang, Yifan Sun, Zhuoer Zhang, Ning Wei, Yening Liu +5 more
top venue similarity 0.64
Abstract · Accepted to NeurIPS 2026

Circuit design for analog integrated circuits (ICs) is challenging because circuit topology, device sizing, and circuit performance are tightly coupled. Existing large language model (LLM)-based methods either rely on inference-time correction around frozen models or train on limited circuit types without directly using simulation outcomes as training signals. A key bottleneck is that existing datasets do not provide sufficient task information for training LLMs on end-to-end specification-conditioned design. To fill this gap, we first construct a large-scale simulation-grounded dataset with 8,626 design tasks across 10 different types of analog circuits, where each task includes a textual description, labeled I/O ports, loading condition, target specifications, a testbench, and a reference netlist. Using this dataset, we present SAFTAC, a simulation-augmented fine-tuning framework that trains LLMs to generate and revise analog circuit design. SAFTAC combines three-stage supervised fine-tuning, which progressively builds the capabilities required for analog circuit design and feedback-guided correction, with simulation feedback-augmented reinforcement fine-tuning, which further optimizes models using simulation-grounded rewards. We evaluate SAFTAC under single-pass generation and two-pass generation with simulation feedback, showing improvements over the strongest closed-source LLM by 15.9% and 7.8%, respectively.

0.39

CRAFT: Analog Circuit Design by Reasoning LLM Agents from Pre-Computed Lookup Tables

cs.AR ·2026-11-19 ·Hyunjun Park, Seungyub Han, Jason Jaesung Lee, Kahyun Kim, Soohyun Kim +4 more
similarity 0.62
Abstract · 7 pages, 9 figures, 2 tables

Automated analog circuit sizing methods, from black-box optimizers to recent large language model (LLM) agents, typically search the design space with a SPICE simulator in the loop, whereas an experienced designer works out a design by hand analysis. This paper presents CRAFT, a flow in which an LLM agent designs a given topology by calculation, as a designer does, and without an initial sizing. The agent works only through DeX, a service that uses pre-computed lookup tables to provide device characteristics and to solve the whole netlist for its operating point and small-signal response. It thus designs without SPICE, and every final design is verified independently in HSPICE. We test CRAFT on four circuits in a commercial 28 nm process; the largest is a 37-transistor three-stage amplifier with 53 design variables, 20 specifications and 74 saturation constraints. With Claude Opus 5.5, CRAFT meets every specification and constraint in all 20 runs, five per circuit. On that amplifier, with DeX in place of HSPICE and an identical request for both, the same agent passes in 10 of 10 runs instead of 6 of 10 within an hour and is 2.0x faster at the median.

0.24

ADSPICE: A Method of Automatic Differentiation for Gradient-Based Lumped Circuit Optimization with Native SPICE

eess.SY ·2026-11-17 ·Marcus W. Wolff, Alan Brannon
similarity 0.61
Abstract · 12 pages, 14 figures

This work presents a novel computer-aided design (CAD) tool for gradient-based circuit optimization using SPICE and automatic differentiation, which we term ADSPICE. Automatic differentiation (AD) is a technique for evaluating a derivative by breaking it into its elementary differentiation operations and repeatedly applying the chain rule, in contrast with a finite-difference-based derivative computed from a small perturbation. Native SPICE (realized with ngspice) is equipped with automatic differentiation toward gradient-based optimization, particularly adjoint-mode optimization. This is implemented with custom C code and shared library control, allowing easy integration with existing SPICE infrastructure. We show a computational performance analysis, demonstrating faster optimization vs. an existing finite-difference method, SPICE OPUS, the closest competitor in SPICE optimization tools. The result is a speedup factor of 383x for the largest circuit compared within the state-of-the-art, SPICE OPUS. For circuit sizes above approximately 3,500 nodes, the time taken by ADSPICE optimization decreases with increasing problem size, as a proportion of total computational time. The speed bottleneck is shown to be SPICE solves rather than ADSPICE enhancements. Voltage gradients needed for forward-mode AD are benchmarked against Xyce, another state-of-the-art simulator, using an integrated CMOS operational amplifier test circuit. The results match with a maximum error of 0.203%, further validating the accuracy of our method. ADSPICE is shown to enable SPICE, and SPICE-based simulators, with automatic differentiation for gradient optimization, without requiring creation of a new circuit simulator.

0.39

Principled Design of Expected Improvement for Continuous Simulation Optimization

cs.LG stat.ML ·2026-10-13 ·Songhao Wang, Jianglin Xia, Haowei Wang, Szu Hui Ng
theory similarity 0.59
Abstract

Expected improvement based on stochastic kriging (SK) surrogate is widely used in continuous simulation optimization, but unknown heteroscedastic noise makes three basic design choices consequential: the incumbent to define improvement, replication allocation, and final recommendation. Existing methods typically either assume the noise levels are known or choose these components separately through heuristic rules or empirical calibration. We instead derive a high-probability upper bound on the simple regret and systematically choose the three components within general rule classes to tighten this bound. We first establish a finite-sample confidence bound for the SK predictor as a foundation for the three design choices. Within general posterior-quantile rule classes, tightening the regret certificate selects a lower-quantile incumbent and an upper-quantile recommendation among sampled designs. The opposing quantiles reflect the different roles of exploratory experiments and the final implemented decision. Under mild conditions satisfied by common kernels, minimizing a tractable kernel-specific bound yields a logarithmic replication order. Based on these design choices, the resulting simple regret matches the existing results under known homoscedastic noise up to logarithmic factors. To our knowledge, this is the first simple-regret guarantee of this form for a continuous-domain EI-type simulation optimization method that learns unknown heteroscedastic variances through replications.

0.27

Exploiting Gradients in Bayesian Inference of Expensive Simulators

cs.LG stat.ML ·2026-10-08 ·Šimon Soldát, Václav Šmídl
top venuecode/data similarity 0.59
Abstract · 8 pages, 4 figures. Code: https://github.com/soldasim/BOSIP.jl

Simulators based on differential equations are ubiquitous in science and engineering. They are often used in simulation-based inference to evaluate the posterior distribution of the input parameters based on real-world observations of the simulator outputs. However, inference becomes challenging when individual simulator evaluations are computationally expensive. In such cases, a Bayesian optimization-based active learning approach with Gaussian process surrogate models has been used to maximize the information obtained from a limited simulation budget. Recently, gradients of simulator outputs with respect to input parameters have become increasingly available, yet they are rarely exploited for inference. Even though we only need to learn the simulator input-output relationship, gradient information can provide an additional valuable signal to guide the active learning procedure. This is of particular interest in the case of expensive simulators, when sample efficiency is crucial. In this paper, we demonstrate how incorporating gradient information into the Gaussian process surrogate accelerates Bayesian optimization-based inference under a limited simulation budget. Our results show significant improvement in convergence speed from using gradient information. For reverse-mode differentiation, the inference efficiency gains are maintained when accounting for the additional computational cost. In contrast, for forward-mode differentiation, the inference speed-up does not outweigh the computational costs. These results indicate that gradient-enhanced surrogates are beneficial primarily in problems where the number of parameters exceeds the output dimensionality, where reverse-mode differentiation is efficient.

0.61