CS Paper Radar

NEMESIS2.0: LLM-Aided Netlist-Driven Performance Equation Modeling for Accelerated Analog Circuit Sizing

Subhadip Ghosh, Ramesh Harjani, Sachin S. Sapatnekar

cs.AR ·submitted 2026-11-13 22:49 UTC · v1
code/data

Abstract

This work presents NEMESIS2.0, an open-source LLM-aided framework that automatically derives equation-based performance models for analog circuits. The resulting equations provide fast, accurate surrogates for SPICE evaluation. To validate the method, equation-based models are developed for seven circuit test cases in a commercial 65nm CMOS technology, covering 15 metrics on five operational transconductance amplifier topologies, and six metrics on two dynamic comparator topologies. When tested on 1000 unseen variants of these seven designs, each corresponding to a different set of independently sampled transistor sizes, the accuracy is found to be within 5% of SPICE. To demonstrate use cases for NEMESIS2.0, the generated models are used as performance evaluators in multiple transistor sizers based on different population-based stochastic search optimizers. For each of the seven test cases, transistor sizing is performed for 100 different sets of performance specifications, with final SPICE simulation confirming that 83.3% of the resulting designs meet all specifications after a single sizing run. The rest fail to meet the specifications due to discrepancies between the model and SPICE, and require iterative resizing under tightened specifications; all such scenarios meet specifications within five iterations. Within the transistor sizers, this equation-based performance analysis evaluates ~400 design candidates per second, versus 0.14 candidates per second for SPICE-based evaluation, achieving 196-238x sizing runtime speedup, including final SPICE verification.

Comment
This paper is under review in the IEEE Transactions on Computer-Aided Design of Integrated Circuits & Systems (TCAD) : 14 pages

Closest papers

Nearest neighbours by meaning across the whole index.

AnalogScout: Simulation-Efficient PVT-Aware Analog Sizing with LLM Agents

cs.AR cs.AIcs.LG ·2026-10-27 ·Yichen Long, Keren Zhu
similarity 0.72
Abstract · 5 pages, 5 figures, 1 table. Submitted to IEEE ISCAS 2027

Analog device sizing must satisfy all specifications across process, voltage, and temperature (PVT) corners to ensure tape-out success, but simulating every candidate at all corners dominates the sizing time and slows design iteration. Conventional surrogate-based optimizers search the sizing space directly, while recent large language model (LLM) agents add circuit knowledge to designs but still delegate the sizes to global optimizers. Both learn the circuit response from repeated multi-corner SPICE simulations and optimize on top of it, which becomes expensive under a limited simulation budget. Providing an agent with reusable verified designs and sizing sub-blocks analytically could save most of this budget. We propose AnalogScout, a simulation-efficient PVT-aware sizing framework driven by an LLM agent. Combining elite-design reuse, analytic gm/Id local sizing and global refinement under full-corner verification, AnalogScout reduces power by 43.3% relative to the evolution strategy CMA-ES at an equal budget of 16k simulations on three SKY130 OTAs of increasing complexity, and reaches the final CMA-ES power after 7.0% of that budget. It also attains lower power than Bayesian optimization on all three OTAs and than two re-implemented LLM-driven flows on the two OTAs where they were tested.

0.21

Simulation-Efficient Analog Circuit Yield Optimization via Monte Carlo Zeroth-Order Gradient Estimation

cs.CE ·2026-09-25 ·Liyan Tan, Yequan Zhao, Ben F. Jamroz, Ari Feldman, Zheng Zhang
theory similarity 0.68
Abstract

Yield optimization under process variation is expensive because each candidate design must be evaluated across many Monte Carlo SPICE samples. The resulting finite-sample yield is also piecewise constant in the design parameters, providing little local information for optimization. We introduce zeroth-order Monte Carlo stochastic gradient descent (ZO-MC-SGD), a black-box method that converts continuous specification margins into stochastic descent directions. Each update evaluates opposite design perturbations under shared process samples, allowing a small simulation batch to estimate a local direction without differentiating SPICE or fitting a global surrogate model. A Spearman rank-correlation test checks that the margin-based loss orders designs consistently with empirical yield. We prove that the estimator is unbiased for a Gaussian-smoothed surrogate and derive variance and sample-complexity bounds with no explicit dependence on process dimension. Across five analog circuit benchmarks with up to 30 design variables and 42 process variables, ZO-MC-SGD reaches a mean yield of 0.95 on four circuits within 50--200 simulations and the empirical yield ceiling on the fifth. Relative to the best of five black-box and learning-based baselines, it reduces the required simulation budget by up to a factor of eight.

0.34

PVTSizing 2.0: A Fast and Reliable Analog Circuit Sizing Operator for Agentic EDA Workflows

cs.AR cs.LG ·2026-11-17 ·Zichen Kong, Minghuan Song, Xiyuan Tang, Ziming Wei, Yi Zhong +1 more
similarity 0.68
Abstract · 10 pages, 4 figures, 5 tables

Analog circuit design automation requires both coordinated tool execution and efficient numerical search. Large language models (LLMs) offer new ways to organize tool execution, but finding one sizing that satisfies specifications across process, voltage, and temperature (PVT) corners remains costly. PVTSizing 2.0 addresses these needs through a human-agent workflow built around an independently usable numerical optimizer. An agent carries the designer's approved task through execution and result review. The optimizer reduces unnecessary training through loss-guided updates and uses critic-guided local refinement to explore additional candidates while accounting for cross-corner conflicts. An optional LLM adviser supplies parameter relationships to focus numerical search on circuit-informed directions, while the optimizer selects adjustment amplitudes and verifies their effects through simulation. Across four circuit benchmarks, the standalone optimizer completes all 40 runs and achieves a 7.3x speedup in overall mean runtime over the original PVTSizing, with a comparable mean sample count. In a separate study, the best tested knowledge-injection configuration further reduces mean runtime by 39.9% and simulation samples by 35.4% relative to the standalone optimizer.

0.21

Topology as a Design Variable: Joint Architecture-Sizing Optimization for SRAM

cs.LG ·2026-11-06 ·Can Wang, Junhao Ma, Yikai Wang, Shan Shen, Wei W. Xing
publishedcode/data similarity 0.63
Abstract · Accepted by ASPDAC2027

SRAM's power-performance-area-stability trade-off depends on bitcell topology, a discrete architectural choice that interacts non-separably with continuous transistor sizing. However, no open-source SRAM tool treats topology as an optimizable variable. OpenRAM generates SRAM layouts but performs no optimization, while OpenYield supports high-fidelity evaluation but restricts optimization to scalar sizing of a fixed 6T cell. OpenYieldV2 closes this gap through three integrated contributions. First, a fully parameterized compiler generates complete 6T and 10T SRAM macros with peripheral circuits and replica-bitline self-timing, enabling topology comparison under identical simulation conditions. Second, a few-shot TabPFN surrogate learns topology-dependent PPA responses with limited full-macro SPICE samples. Third, a coarse-to-refined multi-objective optimizer combines global exploration of discrete architectural choices with local refinement of continuous transistor sizes. Experiments across varying design conditions reveal a topology decision boundary that shifts with operating constraints rather than following a fixed design rule. Jointly optimizing across this boundary improves hypervolume by up to 17.3\% over the strongest single-topology baseline. OpenYieldV2 is open-source to support reproducible SRAM design research.

0.39

ADSPICE: A Method of Automatic Differentiation for Gradient-Based Lumped Circuit Optimization with Native SPICE

eess.SY ·2026-11-17 ·Marcus W. Wolff, Alan Brannon
similarity 0.60
Abstract · 12 pages, 14 figures

This work presents a novel computer-aided design (CAD) tool for gradient-based circuit optimization using SPICE and automatic differentiation, which we term ADSPICE. Automatic differentiation (AD) is a technique for evaluating a derivative by breaking it into its elementary differentiation operations and repeatedly applying the chain rule, in contrast with a finite-difference-based derivative computed from a small perturbation. Native SPICE (realized with ngspice) is equipped with automatic differentiation toward gradient-based optimization, particularly adjoint-mode optimization. This is implemented with custom C code and shared library control, allowing easy integration with existing SPICE infrastructure. We show a computational performance analysis, demonstrating faster optimization vs. an existing finite-difference method, SPICE OPUS, the closest competitor in SPICE optimization tools. The result is a speedup factor of 383x for the largest circuit compared within the state-of-the-art, SPICE OPUS. For circuit sizes above approximately 3,500 nodes, the time taken by ADSPICE optimization decreases with increasing problem size, as a proportion of total computational time. The speed bottleneck is shown to be SPICE solves rather than ADSPICE enhancements. Voltage gradients needed for forward-mode AD are benchmarked against Xyce, another state-of-the-art simulator, using an integrated CMOS operational amplifier test circuit. The results match with a maximum error of 0.203%, further validating the accuracy of our method. ADSPICE is shown to enable SPICE, and SPICE-based simulators, with automatic differentiation for gradient optimization, without requiring creation of a new circuit simulator.

0.33

SAFTAC: Simulation-Augmented Fine-Tuning of Open-Source LLMs for Analog Circuit Design

cs.AR cs.AI ·2026-11-05 ·Junsheng Huang, Yifan Sun, Zhuoer Zhang, Ning Wei, Yening Liu +5 more
top venue similarity 0.60
Abstract · Accepted to NeurIPS 2026

Circuit design for analog integrated circuits (ICs) is challenging because circuit topology, device sizing, and circuit performance are tightly coupled. Existing large language model (LLM)-based methods either rely on inference-time correction around frozen models or train on limited circuit types without directly using simulation outcomes as training signals. A key bottleneck is that existing datasets do not provide sufficient task information for training LLMs on end-to-end specification-conditioned design. To fill this gap, we first construct a large-scale simulation-grounded dataset with 8,626 design tasks across 10 different types of analog circuits, where each task includes a textual description, labeled I/O ports, loading condition, target specifications, a testbench, and a reference netlist. Using this dataset, we present SAFTAC, a simulation-augmented fine-tuning framework that trains LLMs to generate and revise analog circuit design. SAFTAC combines three-stage supervised fine-tuning, which progressively builds the capabilities required for analog circuit design and feedback-guided correction, with simulation feedback-augmented reinforcement fine-tuning, which further optimizes models using simulation-grounded rewards. We evaluate SAFTAC under single-pass generation and two-pass generation with simulation feedback, showing improvements over the strongest closed-source LLM by 15.9% and 7.8%, respectively.

0.39

AgenticSizing: A Large Language Model-based Multi-Agent Framework for Analog Circuit Sizing

cs.AI cs.AR ·2026-09-22 ·Yijia Hao, Pratibha Verma, Dongxu Guo, Cristian Sestito, Michael O'Boyle +2 more
benchmarkcode/data similarity 0.60
Abstract

Analog circuit sizing remains a challenging and time-consuming task due to the large design space, strong performance trade-offs, and increasing circuit complexity in scaled technologies. Although recent large language model (LLM)-based methods show promise in improving sample efficiency and interpretability, existing approaches often lack explicit circuit-topology understanding and are mainly evaluated on relatively simple analog building blocks. This paper presents a multi-agent LLM-based framework for complex analog circuit sizing. The proposed framework first analyzes the circuit topology and decomposes the netlist into functional blocks and substructures. It also extracts lightweight design knowledge for reuse. Based on the extracted topology and knowledge, a planner coordinates multiple role-specialized sizing agents to update design variables and achieve global performance specifications. This workflow mimics the collaborative process of an expert analog design team and provides a structured, interpretable, and simulation-driven optimization procedure. The framework was validated on eight circuits, with the largest design containing up to 55 transistors and 60 sizing variables. Notably, for the LDO benchmark, the proposed method achieved a 60\% success rate with an average of 83 iterations, where classical optimizers failed to find feasible solutions. Further, ablation studies demonstrate that topology understanding, design-knowledge infusion, and agent specialization provide complementary benefits. The source code is available to support reproducibility.

0.16

NN-Based Transistor Modeling for Ultra-Fast SPICE Simulation and Standard Cell Library Characterization

cs.ET cs.LG ·2026-10-22 ·Rodion Novkin, Hussam Amrouch
benchmark similarity 0.59
Abstract · 11 pages

Neural network (NN)-based transistor models have proven to be a promising solution to accelerate device modeling. Although these models demonstrated remarkable speedup in circuit simulations, they were not rigorously tested in complex tasks within standard EDA tool flows for chip design, which require very high transistor model precision to provide accurate results and converge properly. To investigate their full potential and promise, we develop NN-based transistor models that accurately predict the drain current and various charges for a 3nm nanosheet, and employ the models for a standard cell library characterization. This enables us to evaluate the accuracy and speedup under a very wide range of SPICE simulations, benchmarking our models against an industry-standard implementation. Since standard cell library characterization involves thousands of SPICE simulations, it serves as a great benchmark for transistor model quality and consistency. To further evaluate model accuracy, we also perform analog- and digital-level simulations for various complex circuits. Our experiments reveal that NN-based models are a valid alternative to existing transistor compact models, capable of producing accurate delay and power estimates with a much higher speed and convergence time compared to the conventional Verilog-A-based industry-standard (BSIM-CMG) transistor compact model. Our NNs achieve sub-0.11% and 0.76% errors for delay and total power evaluation on a wide range of circuits, while taking up to 8 times less time during the standard cell library characterization. Additionally, we provide comprehensive information and guidance on NN accuracy, unveiling the relationship between NN size and its effect on circuit simulation precision.

0.35