CS Paper Radar

NN-Based Transistor Modeling for Ultra-Fast SPICE Simulation and Standard Cell Library Characterization

Rodion Novkin, Hussam Amrouch

cs.ET cs.LG ·submitted 2026-10-22 09:59 UTC · v1
benchmark

Abstract

Neural network (NN)-based transistor models have proven to be a promising solution to accelerate device modeling. Although these models demonstrated remarkable speedup in circuit simulations, they were not rigorously tested in complex tasks within standard EDA tool flows for chip design, which require very high transistor model precision to provide accurate results and converge properly. To investigate their full potential and promise, we develop NN-based transistor models that accurately predict the drain current and various charges for a 3nm nanosheet, and employ the models for a standard cell library characterization. This enables us to evaluate the accuracy and speedup under a very wide range of SPICE simulations, benchmarking our models against an industry-standard implementation. Since standard cell library characterization involves thousands of SPICE simulations, it serves as a great benchmark for transistor model quality and consistency. To further evaluate model accuracy, we also perform analog- and digital-level simulations for various complex circuits. Our experiments reveal that NN-based models are a valid alternative to existing transistor compact models, capable of producing accurate delay and power estimates with a much higher speed and convergence time compared to the conventional Verilog-A-based industry-standard (BSIM-CMG) transistor compact model. Our NNs achieve sub-0.11% and 0.76% errors for delay and total power evaluation on a wide range of circuits, while taking up to 8 times less time during the standard cell library characterization. Additionally, we provide comprehensive information and guidance on NN accuracy, unveiling the relationship between NN size and its effect on circuit simulation precision.

Comment
11 pages

Closest papers

Nearest neighbours by meaning across the whole index.

NN-Based FeFET Compact Modeling for SPICE Simulation

cs.ET ·2026-11-04 ·Rodion Novkin, Simon Thomann, Hussam Amrouch
similarity 0.76
Abstract · 7 pages

Prototyping and early-stage circuit evaluation for emerging transistor technologies require fast and accurate compact models for SPICE simulations. Standard physics-based compact models, such as BSIM, offer high fidelity but demand extensive domain expertise and time-consuming equation formulation for every new physical effect, significantly slowing technology development. Neural network (NN)-based models offer a scalable alternative approach, but they rely heavily on smooth numerical solver data with explicit high-order derivative information. However, measurement data suffers from complex noise patterns, making derivative extraction challenging and complicating NN-based transistor modeling. This work presents a derivative-free NN training framework employing spectral normalization to naturally smooth derivative behavior and filter measurement noise. Using drain current measurements from a fabricated 28 nm ferroelectric device, we design an NN-based compact model that captures the full spectrum of polarization amplitudes and supports dynamic polarization switching in transient simulations. To demonstrate its capability, we deploy the model in a commercial SPICE software to simulate write and read operations for large-scale memory arrays with up to 512x512 size, including parasitic effects. Our approach bridges raw measurements with NN-based SPICE-compatible transistor modeling, significantly reducing model development time and enabling rapid circuit-level prototyping for emerging devices.

0.11

PRISM-UDE: Physics-Regularized Iterative Symbolic Modeling of 3nm FinFETs via Universal Differential Equation

cs.ET cs.LG ·2026-08-14 ·Pranavanath Balamurali, Prathamesh Dinesh Joshi, Raj Abhijit Dandekar, Rajat Dandekar, Sreedath Panat
benchmark similarity 0.67
Abstract

Compact transistor models are the mathematical backbone of circuit simulation. However, at advanced nodes such as 3nm, transport physics becomes too complex for traditional hand-derived equations to capture accurately. Purely data-driven neural surrogates, on the other hand, are numerically unstable inside circuit solvers and offer no physical insight into their own predictions. We introduce PRISM-UDE (Physics-Regularized Iterative Symbolic Modeling via Universal Differential Equations), a framework that embeds a small neural network inside a physics-based transistor model, using the network only to learn the transport behavior that the analytical baseline misses, rather than replacing the physics altogether. Once trained, this neural correction is distilled into a single, interpretable closed-form expression via symbolic regression, making the final model fully analytical and simulator-ready. Applied to a 3nm FinFET benchmark dataset, PRISM-UDE reduces prediction error more than sixfold (70.33% to 11.01%) relative to the standard physics-only baseline. The distilled expression preserves this accuracy almost exactly while eliminating the neural network entirely. We further validate the extracted expression directly inside a SPICE circuit simulator, confirming stable, physically consistent behavior under both static bias sweeps and dynamic switching conditions.

0.04

CAFE: Conducting-Cell-Aware Adaptive Differential Encoding for Robust DNN Inference in FeFET-Based Compute-in-Memory

cs.AR ·2026-10-14 ·Wenshuai Yao, Wenyong Zhou, Hanyong Shao, Zhiyuan Ning, Ru Huang +1 more
published similarity 0.60
Abstract · Full version of the paper accepted to the 2026 IEEE International Conference on Computer Design (ICCD). 16 figures, 1 table

Ferroelectric field-effect transistor (FeFET)-based compute-in-memory (CIM) promises energy-efficient deep neural network (DNN) inference, but device variation can severely degrade bit-sliced CIM accuracy. Prior works either rely on hardware modifications or treat such variation as generic noise, overlooking a key FeFET asymmetry: negligible off-state leakage makes errors dominated by conducting on-state cells. This asymmetry is amplified by two's-complement sign extension, which maps small negative values to high-significance bit slices and magnifies their errors during shift-and-add reconstruction. In this paper, we propose CAFE, a conducting-cell-aware adaptive differential encoding framework built upon this FeFET-specific asymmetry. CAFE introduces C$^2$AM, a bit-significance-weighted conducting-cell activity metric that predicts output deviation and inference accuracy degradation under FeFET device variation. Guided by C$^2$AM, CAFE applies differential weight and activation encoding to eliminate sign-extension-induced conducting-cell amplification. To balance robustness and cost, CAFE performs type-wise encoding enumeration, layer-wise NSGA-II search, and post-GA pruning to allocate robust encodings where the robustness-cost trade-off is favorable. Across representative vision and language workloads, CAFE reduces C$^2$AM by up to $28.6\times$; in the main deployment study, it improves accuracy over two's-complement CIM by more than 87 percentage points and approaches full-differential robustness at $1.86$-$2.78\times$ normalized cost, compared with $3.06\times$ for uniform full-differential encoding.

0.26

Mesh-Native Physics-Informed Graph Surrogates for TCAD-in-the-Loop Design Space Exploration

cs.LG cs.ARcs.CE ·2026-09-02 ·Leonid Popryho, Ayoub Sadeghi, Inna Partin-Vaisband
published similarity 0.60
Abstract · 9 pages, 4 figures, 2 tables. Accepted at IEEE/ACM International Conference on Computer-Aided Design (ICCAD 2026)

High-fidelity TCAD simulation of drift-diffusion transport remains the workhorse of emerging FinFET device design, but it is computationally expensive, especially for 3D structures where runtime escalates steeply with mesh complexity. This sharply limits multi-objective design space exploration. Existing machine-learning surrogates map a fixed set of design parameters to a few scalar device metrics, discarding the underlying physics and losing transferability across device geometries and families. A physics-informed graph attention network (GAT) surrogate is proposed. It operates directly on the tetrahedral TCAD mesh and predicts, at every mesh node, the electrostatic potential together with the electron and hole quasi-Fermi levels, the fundamental unknowns of the drift-diffusion system. Training combines a data loss with finite-volume current-continuity residuals, embedding carrier-transport physics into the objective. Operating on the mesh as a graph, the surrogate inherits size generalization: a model trained on few-fin meshes applies unchanged to substantially larger arrays, bounded at inference only by GPU memory. Per-node uncertainty from a deep ensemble drives an active-learning loop that screens large candidate pools in seconds and forwards only the most informative designs for full simulation. Benchmarked against Sentaurus Device on multi-fin tri-gate FinFETs, the surrogate reproduces the three drift-diffusion fields with sub-volt per-field RMSE and reaches a per-design throughput orders of magnitude higher than the full simulator. The advantage grows with device size: on large multi-fin arrays that are prohibitively slow to simulate directly, inference still completes in under a second per device, enabling Pareto-front exploration across device scales infeasible for direct TCAD sweeps.

0.62

An Emerging NVM-Based On-Chip Training Architecture with Non-Ideality Mitigation Through Bipolar Weight Distributions

cs.AR ·2026-09-01 ·Peng Dang, Youna Huang, Yintao He, Huawei Li
top venuebenchmark similarity 0.60
Abstract · 14 pages. Accepted for publication in IEEE Transactions on Very Large Scale Integration (VLSI) Systems

The rapid advancement of deep learning has presented significant energy efficiency challenges to the conventional von Neumann architecture. In-memory computing (IMC) architectures based on emerging non-volatile memory (eNVM) are widely regarded as a promising solution for accelerating neural network training due to their high parallelism and low power consumption. However, the intrinsic non-idealities of eNVM devices can cause conductance updates to deviate from target values, thereby limiting the performance of on-chip training. To address this challenge, this paper presents a Non-ideality Optimized eNVM Accelerator (NOVA) architecture for on-chip training. Specifically, we first fabricate a two-dimensional (2D) ferroelectric field-effect transistor (FeFET) and develop a conductance modulation behavioral model calibrated with experimental data. Building upon this device model, we propose, for the first time, a Non-ideality Avoidance Training (NAT) algorithm tailored for eNVM devices, which mitigates accuracy degradation by guiding weight convergence toward the most stable conductance regions of eNVM devices. Experimental results demonstrate that, even under severe device asymmetry, NAT improves the accuracy by an average of 15.1\% over the baseline methods across multiple benchmark tasks. Meanwhile, the NOVA achieves an average energy efficiency gain of approximately 33.58$\times$ compared with the peak energy efficiency of graphics processing units (GPUs).

0.69

NEMESIS2.0: LLM-Aided Netlist-Driven Performance Equation Modeling for Accelerated Analog Circuit Sizing

cs.AR ·2026-11-13 ·Subhadip Ghosh, Ramesh Harjani, Sachin S. Sapatnekar
code/data similarity 0.59
Abstract · This paper is under review in the IEEE Transactions on Computer-Aided Design of Integrated Circuits & Systems (TCAD) : 14 pages

This work presents NEMESIS2.0, an open-source LLM-aided framework that automatically derives equation-based performance models for analog circuits. The resulting equations provide fast, accurate surrogates for SPICE evaluation. To validate the method, equation-based models are developed for seven circuit test cases in a commercial 65nm CMOS technology, covering 15 metrics on five operational transconductance amplifier topologies, and six metrics on two dynamic comparator topologies. When tested on 1000 unseen variants of these seven designs, each corresponding to a different set of independently sampled transistor sizes, the accuracy is found to be within 5% of SPICE. To demonstrate use cases for NEMESIS2.0, the generated models are used as performance evaluators in multiple transistor sizers based on different population-based stochastic search optimizers. For each of the seven test cases, transistor sizing is performed for 100 different sets of performance specifications, with final SPICE simulation confirming that 83.3% of the resulting designs meet all specifications after a single sizing run. The rest fail to meet the specifications due to discrepancies between the model and SPICE, and require iterative resizing under tightened specifications; all such scenarios meet specifications within five iterations. Within the transistor sizers, this equation-based performance analysis evaluates ~400 design candidates per second, versus 0.14 candidates per second for SPICE-based evaluation, achieving 196-238x sizing runtime speedup, including final SPICE verification.

0.26

PINND: Physics Informed Neural Networks for Solving the Drift-Diffusion Equations

cs.LG ·2026-10-23 ·Luke Ragan, Matteo G. C. Alasio, Enrico Bellotti, Luca Dal Negro
similarity 0.59
Abstract

The drift-diffusion equations are the fundamental building block for the modeling, design, and optimization of modern semiconductor devices. Solutions of the drift-diffusion equations rarely give way to analytical forms, and exhibit strong nonlinearity, with the solutions ranging over several orders of magnitude. These attributes have led to research into numerical solvers, and while many commercial Technology Computer Aided Design (TCAD) packages now exist, they may require long simulation times, exhibit sensitivity to initial guesses, and rely on mesh generation. Further, these solvers are not well suited for inverse problems where the design parameters of a device are retrieved from its desired functional characteristics. To address all these challenges, this work demonstrates the usage of Physics Informed Neural Networks for the Drift-diffusion (PINND) equations with errors comparable to traditional simulation software using advanced training techniques to solve problems beyond the well-behaved equilibrium regime. For this study, we specifically choose an abrupt PN-junction in both one and two dimensions that features extreme gradients of the carrier concentrations at the Ohmic contacts and an abrupt discontinuity in the doping profile. Using the proposed PINN architecture, we are able to retrieve accurate results for all observables under all bias conditions. Additionally, we apply the PINN solver towards the inverse problem of retrieving doping profiles directly from desired electric field distributions or electrostatic potentials under non-zero applied biases. Our work establishes a powerful PINNs-based approach for semiconductor device modeling with the ability to solve inverse problems under non-equilibrium conditions for microelectronics research and discovery.

0.27

A Surrogate Model for Variation-Aware Clock-Mesh Analysis and Design-Space Exploration using Graph Neural Networks

cs.AR cs.LG ·2026-11-01 ·Muhammad Hadir Khan, Wajid Ali, Arya Thottiparambil Manikandan, Matthew Guthaus
similarity 0.59
Abstract

Clock meshes are widely used in high-performance VLSI systems to minimize skew and tolerate On-Chip Variation (OCV) in nanometer technologies. However, analyzing meshes is difficult because reconvergent paths and multi-source drivers prevent static timing analysis (STA) tools from handling mesh loops, making SPICE the industrial standard. SPICE simulations are accurate but slow, so clock-mesh synthesis relies on approximate models that overlook critical effects such as non-linear buffer driving caused by input slew and input skew. We propose a Graph Neural Network (GNN) based surrogate model of the clock mesh with a new graph representation and a new architecture that predicts power while also improving the delay and slew predictions at the sinks and capturing the skew histogram under OCV. Trained on SPICE data and tested on unseen real designs, our model achieves average errors of $3.40$~ps in delay, $4.14$~ps in slew and $4.46$~ps in skew, compared with $6.28$~ps, $12.35$~ps, and $11.62$~ps for our prior model, and $74.37$~ps delay and $27.51$~ps skew for the approximate method used in current state-of-the-art works. Our model predicts power within $3.4\%$ of SPICE on average, while delivering $18\times$-$1706\times$ speed-ups over the approximate method under OCV modeling, enabling faster and more accurate clock-mesh design-space exploration. A case study on a real design further shows that our surrogate model finds buffering candidates that, at a balanced tradeoff, improves $99^{\text{th}}$-percentile skew by $49.1\%$, reduces power by $25.7\%$, and reduces area by $37.3\%$ at the cost of a $6.8\%$ increase in $99^{\text{th}}$-percentile maximum slew as compared to the state-of-the-art work.

0.21