CS Paper Radar

Temporal Property-driven Design Space Exploration with Reinforcement Learning for Cyber-Physical Systems

Tagir Fabarisov, Maxime Cordy

eess.SY ·submitted 2026-08-24 16:13 UTC · v3
published

Abstract

Design-space exploration of configurable Cyber-Physical Systems (CPS) requires executable evaluation when design choices affect timing, fault propagation, recovery behavior, and temporal-property satisfaction. Repeated stochastic executions make exhaustive exploration impractical for large design spaces. This paper presents a temporal-property-driven CPS design workflow using Reinforcement Learning (RL). At design time, the RL agent selects subsystem alternatives to assemble a candidate system model. The model is then evaluated through simulation, during which online temporal-property monitors observe runtime traces and produce functional-property violation indicators. These indicators are combined with evaluated non-functional terms for budget, recoverability, sustained compliance, and operational use to calculate the reward used for subsequent candidate selection. The workflow is evaluated on a methane-sensitive mine-pump CPS. The corresponding executable case-study model is provided as additional contribution. RL-guided search identifies the highest-reward design observed in the experiments after 26 episodes (corresponds to 130 executable simulations). These designs were reached with fewer simulations than surrogate-guided Bayesian Optimization and population-based Genetic Algorithm baselines under the same executable model and reward formulation. Ablation study results indicate that value-based feedback and reuse of previous simulation traces contribute to this reduction.

Comment
Accepted manuscript for IECON 2026 - 52nd Annual Conference of the IEEE Industrial Electronics Society, Doha, Qatar, 18-21 October 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Towards Enriching Design-Time Models with Evidence from Simulation and Operational Activities

cs.CL ·2026-10-09 ·Barbara da Silva Oliveira, Julien Deantoni, Nicolas Ferry
top venue similarity 0.64
Abstract

Cyber-Physical Systems are developed through multiple model based activities, comprising several stages of development. As the development progresses through simulation, experimentation, and operation, observations of system execution may reveal missing, uncertain, or invalid design knowledge. The path from execution results to persistent design-time enrichment, however, is often implicit. This paper addresses this challenge by proposing an evidence driven workflow for systematically transferring knowledge produced during simulation and operation back into design-time models. We demonstrate the workflow using an Influence Model, a design-time artefact used to represent how design artefacts and environmental factors jointly affect system response properties, using a sign-following robot use case. We show how simulation evidence can enrich Influence Models by supporting participant pruning decisions, interaction characterisation, influence-function abstraction, and validity-scope information. The application demonstrates the feasibility of the workflow for simulation-based evidence and its potential benefits to improve design-time reasoning and feedback in subsequent development iterations.

0.37

Assuring Learning-Enabled Cyber-Physical Systems with Foundation Models: A Neuro-Symbolic Agenda for Testing, Verification, and Runtime Assurance

cs.RO eess.SY ·2026-10-29 ·Xi Zheng, Ivan Ruchkin, Hong Jin Kang, Tevfik Bultan, Vijay Ganesh +9 more
position similarity 0.62
Abstract

Learning-enabled cyber-physical systems (CPS), including autonomous vehicles and UAVs, increasingly incorporate foundation models, yet fragmented assurance practices provide insufficient support for system-level guarantees. We argue that restoring engineering control across stochastic neural, symbolic, and physical boundaries requires a shift from model-centric evaluation to system-level assurance. We introduce the Foundation Model Assurance Stack, connecting three directions: (i) neuro-symbolic architectures that constrain foundation models through explicit symbolic world models, reasoning layers, and interfaces; (ii) semantically grounded, conformance-based testing that combines formal specifications and symbolic world models with foundation-model-assisted specification mining, scenario generation, and test synthesis; and (iii) compositional verification and runtime assurance that target formally tractable components and interfaces through modular contracts, equivalence checking, verified synthesis, uncertainty-aware reasoning, and runtime monitoring and enforcement. Symbolic abstractions establish assurance boundaries between stochastic learning and formal reasoning, connecting testing, verification, and runtime evidence across the system lifecycle. Foundation models serve as constrained assistants whose outputs are independently checked wherever correctness can be formally specified. We identify research challenges in specification engineering, abstraction fidelity, evidence composition, and lifecycle certification, and outline a staged agenda toward trustworthy, deployable, and certifiable learning-enabled CPS.

0.24

Efficient Bayes-Adaptive Reinforcement Learning with Temporal Logic Specifications

cs.LG ·2026-09-17 ·Jonathan Hau, Alessandro Abate
similarity 0.62
Abstract · ©~2026 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future …

We present a novel end-to-end model-based Reinforcement Learning (RL) algorithm for efficient policy synthesis under given Linear Temporal Logic (LTL) specifications (e.g., safety or reachability) in unknown environments. To do so, a Limit-Deterministic B{ü}chi Automaton (LDBA) representation of the LTL task is synchronised with a Bayes-Adaptive Markov Decision Process (BAMDP) representation of the environment, which allows us to leverage an enhanced exploration-exploitation trade-off that is achieved via Bayesian RL, as opposed to traditional non-Bayesian approaches. We further propose a novel Bayes-Adaptive Monte-Carlo Planning (BAMCP) algorithm to allow for approximate Bayes-optimal strategy synthesis in the synchronised BAMDP construct. A range of finite- and infinite-horizon task experiments demonstrate the effectiveness of our approach in terms of both property satisfaction and sample efficiency, when compared to traditional model-free approaches. Additional ablation studies also successfully highlight the value of the novel BAMCP algorithm in comparison to classical BAMCP for LTL task satisfaction. Finally, we also showcase a successful application of our approach for \textit{cautious} RL, namely to reduce the number of task violations incurred during policy training.

0.21

KD-DSE: A Knowledge-Driven LLM Framework for Fast Microarchitecture Design Space Exploration

cs.AR ·2026-11-17 ·Siqing Fu, Xin Liu, Yuhan Tang, Hanqing Li, Feng Guo
hot direction similarity 0.61
Abstract · 4 pages, 4 figures

Domain-specific architectures have made design space exploration (DSE) a bottleneck of processor design, yet each candidate costs a full simulation, so exhaustive search is out of reach. Surrogate models need thousands of simulations before they predict reliably, and LLM agents that search directly hallucinate, lack cold-start architectural knowledge, and follow a fixed per-round policy. We present KD-DSE, a knowledge- driven LLM framework for fast microarchitecture DSE. KD- DSE couples a five-state constrained agent with real gem5- McPAT evaluation, retrieves architect-curated guidance from an Architecture Knowledge Base conditioned on the current search state and bottleneck diagnosis, and allocates its budget with a diagnosis-guided two-phase exploration strategy. On a 29- parameter out-of-order core with a budget of 18 simulations, KD-DSE achieves about 4.8% higher hypervolume and about 21.7% lower ADRS than the state-of-the-art MicroEvo, and the ablation attributes the gain chiefly to the Knowledge Base. These results indicate that constraining LLM reasoning and grounding it in architectural knowledge can drive fast and effective microarchitecture DSE. The code will be open-sourced upon acceptance.

0.30

Autonomous Model Lifecycle Management for Digital Twin-Based Manufacturing Control

cs.LG ·2026-09-19 ·Zhengyang, Gu, Thomas Cook, Fredaljohn Rohrbaugh, Joseph E. Hernandez +1 more
published similarity 0.61
Abstract · The paper has been accepted for publication in the 2026 IEEE International Conference on Systems, Man, and Cybernetics (SMC 2026). The final…

Manufacturing AI systems must autonomously adapt to continuous distributional shift from raw-material variability, ambient changes, and equipment aging, under strict safeguard and operator-trust requirements where model failures risk physical damage. This paper presents a closed-loop Cyber-Physical System (CPS) for autonomous model lifecycle management in automotive manufacturing, deployed since 2023. The system manages product-specialized model pairs: a sequence-to-sequence physics model (LPP) serving as a digital twin, and a deep Reinforcement Learning (RL) control policy (LCP) trained against it. Per retraining cycle, multiple model variants spanning architecture families and RL algorithms compete; only the best-scoring candidate advances. A Conductor orchestrator autonomously manages plant-wide model inventories with dependency-aware retraining and Proportional-Integral-Derivative (PID) fallback. Reflecting the principle of Human-Centric Intelligence, the LCP composite score embeds an operator-trust gate penalizing policies deviating from established practice; without it, 23% of policies are rejected by operators despite passing accuracy thresholds. Across multiple facilities, LCP-controlled processes achieve process stability improvements of 28-45% over uncontrolled baselines with zero safety incidents.

0.22

BEHAVE: Functional Behavior Modeling Enables Self-Improving Agents for Hardware Design and Verification

cs.AI cs.ARcs.LG ·2026-09-28 ·Yuheng Wu, Berk Gokmen, Sujeeth Jinesh, Lauren McLane, Aarav Wattal +3 more
similarity 0.60
Abstract

Developing agents for hardware design and verification requires reliable correctness feedback. As a hardware specification may permit correct implementations with different latencies, matching design and reference outputs cycle by cycle can reject valid designs. To address this, we introduce BEHAVE, an agentic framework for multi-turn joint hardware design and verification through functional behavior modeling. We define Behavior IR to express task functionality as executable behavior models without prescribing implementation timing beyond the specification. The agent iteratively develops a register-transfer-level (RTL) design and a behavior model as the design's verification reference. Our evaluator, BEHAVE-Sim, checks both artifacts separately against a hidden golden behavior model using input stimuli generated by random sampling and solver-guided search. BEHAVE thus supports power, performance, and area (PPA) exploration across task-permitted latencies and microarchitectures. During training, the same evaluator provides verifiable reinforcement learning (RL) rewards from specification-behavior pairs without reference RTL. For self-improvement, the agent continually searches for high-level implementations relevant to its capability gaps, constructs and checks specification-behavior pairs, and trains on the expanded task pool. We release BEHAVE-Train and BEHAVE-Eval with 600 human-reviewed specification-behavior pairs for realistic hardware workloads. Starting from 60 seed tasks and acquiring 100 new tasks, self-improvement raises Qwen3.8-27B's RTL pass@1 on BEHAVE-Eval from 55.0% to 75.0%, reaching performance comparable to RL using a 540-task pool.

0.14

AutoEnergyDesign: An LLM-Driven Agent for Automatic Energy System Design Optimization

cs.AI stat.ML ·2026-10-26 ·Amedeo Buonanno, Salvatore Fabozzi, Maria Valenti
similarity 0.60
Abstract

The design optimization of building energy systems represents a complex, high-dimensional search problem involving discrete technology selections, continuous sizing parameters, and intricate economic trade-offs in which every candidate must be evaluated by a year-long simulation. This paper presents AutoEnergyDesign, in which a Large Language Model (LLM) agent reasons over past simulation results, proposes configuration changes and learns in context from each outcome, while a git-based mechanism reverts changes that do not improve the design. The agent couples a reasoning model with explicit memories, a constrained action interface, and an environment-grounded keep/revert feedback signal. The simulator covers eight technologies and computes the 25-year Net Present Cost (NPC). On a case study with measured building loads, the agent, instantiated with three Claude models (Haiku 5.5, Sonnet 5.5 and Opus 5.5; ten runs of 50 simulations each), is compared with random search, Tree-structured Parzen Estimator (TPE) Bayesian optimization and a (1+1) evolution strategy that shares the agent's acceptance rule (ten seeds of 300 evaluations). With all three models the agent reaches an NPC of 3.53MEUR, 1.20% and 0.23% below the best results of TPE and of the evolution strategy, and comes within 1% of it after a median of 18 to 27.5 simulations; among the baselines, only the evolution strategy does so, after a median of 192 evaluations. Every decision is recorded, making the search auditable.

0.26

Reinforcement Learning-Based Production Scheduling in an Industry-Based Coating Scenario Using the Digital Model Playground

cs.AI ·2026-08-14 ·Arne Kröger, Ralf Buschermöhle, Wilhelm Hasselbring, Henrik Wilbers
publishedbenchmarkcode/data similarity 0.60
Abstract · Copyright 2026 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or…

Production scheduling in complex manufacturing environments is challenging when sequence-dependent setup times, stochastic disturbances, and due-date constraints must be addressed simultaneously. While reinforcement learning (RL) methods have shown promising results in research, most studies rely on simplified benchmark processes, limiting their industrial relevance. This paper demonstrates the applicability of RL-based scheduling in an industry-inspired coating process that reflects practical complexities such as sequence-dependent setup times, machine breakdowns, and variable utilization. The open-source Digital Model Playground (DMPG), a discrete event simulation framework, is used to model the scenario and to train RL agents. Two standard algorithms, Deep Q-Networks and Proximal Policy Optimization, are benchmarked against conventional dispatching rules to illustrate feasibility and to provide a transparent testbed for further research. Results indicate that RL-based scheduling achieves balanced improvements across key performance indicators, with PPO delivering the most robust performance. The main contribution of this work is to bridge the gap between academic research and industrial practice by validating RL-based scheduling in a realistic, shareable scenario and by providing a reusable open-source framework for future studies.

0.38