CS Paper Radar

UHI-Bench: Benchmarking Dual-Source Urban Heat Island Modeling Across Cities in Diverse Climate Regimes

Wanyun Ling, Chenxi Liu, Yi Xie, Aopu Xu, Zhuoqi Zeng, Ziyue Li

cs.LG ·submitted 2026-08-24 22:00 UTC · v1
benchmark

Abstract

Urban heat islands (UHIs) are intensifying under climate change, exacerbating thermal exposure risks. Their two primary observations, land surface temperature UHI (LST-UHI) and near-surface air temperature UHI (AirT-UHI), capture physically distinct aspects of urban heat. However, most studies rely on a single source, and substituting one for the other can substantially bias the magnitude and spatial variability of human heat exposure. Accurate UHI modeling also requires dynamic meteorological drivers and static urban morphology features, but spatiotemporal incompatibilities hinder their alignment. Cloud gaps in LST observations and sparse AirT station networks further limit dual-source UHI modeling, motivating cross-city transfer across diverse climates. To bridge these gaps, we introduce UHI-Bench, the first UHI benchmark for dual-source UHI modeling that integrates dynamic and static environmental context. Following a unified signal, mechanism, and transfer framework, it evaluates over 20 baselines from four model families on five tasks across 20 cities and nine Köppen climate classes. Results show that no model is uniformly best, although foundation models remain consistently competitive and stable. Environmental covariates generally improve performance, but their utility varies across sources and tasks. Cross-city transferability is better explained by overlap in UHI regimes than by climate-zone similarity. With the dataset and standardized pipeline, our work provides practical guidance for urban heat modeling, promotes climate data equity, and supports future advances in climate research.

Comment
24 pages, 11 figures, 19 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Less is more: error-distance scaling relation for data-efficient kilometer-scale downscaling of extreme heat

cs.LG physics.ao-ph ·2026-09-30 ·Ahmed Marey, Henry Lu, Abhishek Gaur, Sherif Goubran, Malek Aloui +4 more
similarity 0.62
Abstract

Extreme heat is where urban adaptation needs kilometer-scale data the most, but the simulations training a downscaler can cost more than they save, and how much is needed has not been identified. We measured it with CASPER, a U-Net with a structure-preserving loss downscaling 32 km reanalysis to 1 km temperature, humidity and wind, across 24 configurations of one to eight months. Held-out error grows linearly with climatological distance to the training data, RMSE = 0.83 + 2.95 d, explaining 90% of its variance against 7% for volume and predicting unseen months in advance. On held-out extreme summer weeks CASPER preserves the fine-scale structure and cross-variable physics that matched-budget baselines degrade, and matches station observations during documented heat waves to within 1.8 K. Transfer to a new region degrades geographically; 11 days of local simulation cuts Vancouver's held-out error from 3.8 to 1.3 K. Training periods should span the target climate: the same accuracy for four times less simulation, putting kilometer-scale downscaling of extreme heat within reach of groups without large computing facilities.

0.24

Analysis of trade-offs in urban heat mitigation using a Bayesian Optimization framework for an urban canopy layer model

cs.CE physics.ao-ph ·2026-09-22 ·Rebekka Walter, Johanna Gelhaus, David Anton, Henning Wessles, Stephan Weber
similarity 0.58
Abstract

To mitigate the challenges of climate change and intensifying heat stress in urban areas, local adaptation strategies are discussed and introduced in cities worldwide. To understand processes and potential trade-offs of these strategies a Bayesian optimization and surrogate modeling framework was employed to investigate urban parameter ranges of heat mitigation strategies with focus on three thermal metrics: daytime air temperature, Universal Thermal Climate Index (UTCI), and nighttime air temperature. Based on an urban street canyon configuration, it was shown that heat mitigation measures that reduce daytime air temperature and UTCI are often associated with higher nighttime temperatures. This results in a curved Pareto front that reflects the trade-off between daytime and nighttime thermal comfort. Under identical forcing conditions, different urban configurations, varying in geometry, vegetation, and surface characteristics, are shown to alter peak canyon air temperature by up to 5.2~$^\circ$C during the day and 2.6~$^\circ$C at night, while UTCI varies by up to 7.9~$^\circ$C, demonstrating that favorable urban configurations can substantially mitigate microclimatic heat stress. These findings suggest that combining multi-objective Bayesian optimization and surrogate modeling can help bridge the gap between computationally intensive climate simulations and practical decision-making in urban planning. An interactive visualization tool was developed to explore these trade-offs, making the often opposing relationships between urban parameters and the three thermal metrics directly accessible to planners.

0.26

WeatherBridge: Forecast-Aware Multi-Source Input Adaptation for Pretrained Weather Forecasting Models

cs.AI ·2026-10-10 ·Mutian Xi, Xinyu Su, Xiaohui Zhong, Hao Li
similarity 0.56
Abstract

Data-driven weather forecasting models are commonly trained on ERA5, yet operational deployment must use timely initial states from physics-based numerical weather prediction (NWP) systems whose distributions differ substantially from ERA5. Direct initialization with these states can degrade autoregressive forecasts, motivating input adaptation that keeps the pretrained forecasting model unchanged. Here, we introduce WeatherBridge, a unified, source-conditioned adapter that maps heterogeneous operational NWP initial states to ERA5 reference states without updating the pretrained forecasting model. WeatherBridge predicts the structured residual corrections with a Swin-UNet and injects source embeddings across multiple spatial scales, allowing the model to capture shared atmospheric structure and source-specific discrepancies. Its training objective combines latitude-weighted ERA5 reconstruction with One-step Rollout Alignment (ORA), which backpropagates one-step forecast error through a frozen FuXi model to optimize the adapted states for both initial state fidelity and downstream forecast compatibility. We evaluate WeatherBridge using daily GFS, HRES, and CMA initializations from 1 January to 22 November 2025 across six variables and lead times up to 240 hours. Relative to raw source initialization of FuXi, WeatherBridge reduces the mean RMSE of FuXi over the 6- 240-hour rollout for 17 of 18 source-variable combinations, with a median reduction of 10.2% and a maximum reduction of 46.3%. The adapter trained with frozen FuXi also improves FengWu forecasts on GFS inputs without retraining either the adapter or FengWu. These results demonstrate that forecast-aware input adaptation can improve forecasts from heterogeneous operational NWP inputs and transfer across pretrained ERA5-based forecasting models.

0.18

Mapping urban heat from citizen-collected data: a scalable Gaussian process approach to correcting for preferential sampling

cs.LG stat.AP ·2026-09-21 ·Ellie K. Kim, Zachary D. Calhoun, Michael H. Bergin, David E. Carlson
similarity 0.55
Abstract

The urban heat island (UHI) effect amplifies heat stress in cities, increasing heat-related illness, mortality, sleep disruption, and energy demand. Because UHI intensity varies at neighborhood scales, intra-city temperature mapping is essential for assessing public health impacts, yet existing monitoring networks are sparse. Crowdsourced weather stations provide dense, hourly observations but suffer from noise and systematic biases, including preferential sampling driven by where residents install sensors. We introduce two scalable Gaussian process frameworks which adjust for preferential sampling and enable statewide, high-resolution temperature prediction. The first integrates sampling correction directly within a sparse variational Gaussian process (SVGPR+PS). The second uses a two-stage estimator involving a log-Gaussian Cox process (LGCP+GP) that estimates the sampling intensity field and incorporates it into temperature prediction. Both methods rely on inducing-point approximations and variational inference to scale beyond traditional Gaussian processes. Applied to approximately 10,000 citizen stations across North Carolina, the models generate hourly temperature fields within minutes. Validation against independent urban heat campaign data shows that the preferential sampling correction improves predictive performance, increasing average afternoon correlations across four cities from 0.26 to 0.43. This scalable framework enables neighborhood-level UHI assessment and supports studies of heat exposure disparities statewide.

0.25

DySENSE: Dynamic Spatiotemporal ENergy Synthesis and Emulation with Satellite Imagery

cs.CV cs.AI ·2026-11-13 ·Kailai Sun, Zijie Gao, Mingyi He, Can Rong, Alok Prakash +3 more
publishedcode/data similarity 0.55
Abstract · Accpted by KDD 2027

Cities account for over two-thirds of the world's energy and more than 70% of global carbon dioxide emissions. City energy is essential for achieving the 2050 net-zero target and the UN's Sustainable Development Goals 7 and 11. Although existing studies have made progress, they are limited by data and methodological gaps. Existing studies are largely predictive for existing cities rather than generative for future cities; fine-grained, aligned monthly dynamic energy data are scarce; and existing GenAI models struggle to generate dynamic urban functional monthly energy. We present DySENSE, a joint multimodal GenAI framework that synthesizes static urban satellite imagery together with spatially aligned, dynamic monthly building energy consumption maps. We decouple long-term static urban morphology from short-term dynamic energy consumption. By conditioning on static urban land use, DySENSE can generate realistic, diverse and new static urban imagery with aligned energy maps. By conditioning on dynamic monthly and climate prompts, DySENSE can jointly generate dynamic, monthly energy consumption maps while keeping the urban morphology static. Experiments across four cities (New York, Washington, Norfolk, Busan) demonstrated that DySENSE can generate annotated high-fidelity synthetic energy data using less than 25% labelled data, boosting downstream prediction performance by 8% mIoU, and achieving strong energy dynamic consistency. Compared to existing methods, DySENSE significantly improved prediction performance (8.7% accuracy) and reduced prediction error (9%-18% CVRMSE, ASHRAE). DySENSE offers an effective foundation for energy-efficient cities, peak-load analysis, building performance simulation and dynamic demand response for city, energy, and building science. The data and code: https://huggingface.co/datasets/skl24/MUSE2 and https://github.com/kailaisun/DySENSE

0.47

End-to-End Landsat Land Surface Temperature Reconstruction with AlphaEarth Embeddings

cs.CV ·2026-11-18 ·Shengjie Liu
published similarity 0.55
Abstract

Land surface temperature (LST) data at Landsat's 30 m resolution is important for many applications, but cloud contamination prevents its spatially continuous observations. Here, we propose A$^2$E$^2$, an end-to-end U-Net that integrates annual temperature cycle (ATC), coarse LST from Earth system modeling, and AlphaEarth embeddings for Landsat LST reconstruction. The ATC supplies a physics-guided thermal prior, the coarse LST provides a temporal background, and the U-Net converts the embedding field into day-specific fine-scale correction using observed pixels. Experimental results on four seasonally distributed Landsat 8/9 scenes over New York City in 2022 show that A$^2$E$^2$ achieves 0.78 K mean absolute error and 1.01 K root mean squared error, reducing error by 60.1% relative to baseline method without spatial correction and by 3.7% relative to the same U-Net guided by annual mean spectral reflectance. Sensitivity analysis shows stable performance regardless of distance to clear pixels and percentage of blocked pixels. Independent validation with ECOSTRESS LST shows that Earth foundation model embeddings have better performance than annual mean spectral bands for LST reconstruction.

0.31

Steering Diffusion Priors with Sparse Observations for High-Resolution Temperature Downscaling

cs.LG physics.ao-ph ·2026-09-08 ·Anirudh Avireddy, Manmeet Singh, Shivanshi Singh, Ayush Raj, Saptarishi Dhanuka +2 more
similarity 0.55
Abstract

Local heatwave hazard depends on fine-scale air temperature, but ground stations are sparse and reanalysis products such as ERA5 cannot resolve the terrain and land-surface contrasts that shape real heat exposure. We present a conditional diffusion emulator for high-resolution 2-m temperature downscaling, conditioned on static geography, a training climatology, exact-time ERA5 temperature, and solar and temporal features, guided at inference by score-based data assimilation (SDA): a differentiable Gaussian observation likelihood steers the diffusion score toward sparse revealed temperature observations without any retraining. On a controlled 32-case synthetic-grid protocol over AORC, guidance improves hidden-cell reconstruction over both ERA5 and a strong observation-proximal nearest-neighbor baseline once observation density reaches 1\% (RMSE 0.318 vs.\ 0.431~K, winning all 32 cases), while sparser regimes still favor direct interpolation. We further map the full guidance-strength landscape across three observation densities, showing that the optimal strength shifts systematically with density and that over-guiding causes sharp, predictable degradation -- giving a concrete operating recipe rather than a single untuned setting. The resulting fields are intended as a temperature layer for downstream heatwave-hazard products such as threshold exceedance and cumulative heat-burden. The present evidence is a controlled synthetic-grid validation; station-network and held-out-year evaluations are the next steps toward deployment.

0.18

A hybrid machine learning-analog framework for downscaling unprecedented climate extremes

cs.LG stat.AP ·2026-11-11 ·Nina Effenberger, Florian E. Roemer, Maybritt Schillinger, Maxim Samarin, Erich Fischer +1 more
similarity 0.53
Abstract

Extreme weather events are critical for climate impact assessments. While physical models can simulate unprecedented extremes, for example, through ensemble boosting, this approach is computationally demanding, often restricting output to coarse spatial resolutions. Probabilistic generative downscaling offers a solution by enabling efficient sampling from the entire climate distribution, including its extreme tails. Here, we first demonstrate that machine learning generated regional climate model heatwaves over Paris are physically realistic. We then leverage an emulated machine learning dataset to perform analog-based downscaling of coarse global climate model ensemble boosting events. Our hybrid framework effectively bridges high-resolution regional detail with rare-event sampling, providing an efficient tool for extreme event downscaling and capturing multi-model uncertainty.

0.04