CS Paper Radar

An Open-Source Benchmark Suite of 3D-IC Testcases

Rohan Soni, Jooyeon Jeong, Alexander Graening, Anthony Foo, Richard Chen, Puneet Gupta

cs.AR ·submitted 2026-08-25 21:04 UTC · v1
benchmarkcode/data

Abstract

The physical design community has benefited from standardized, publicly available benchmark suites, which have enabled reproducible evaluation and driven significant advances in 2D place-and-route algorithms over the past three decades. However, the emergence of 3D heterogeneous integration technologies, including through-silicon vias (TSVs), hybrid bonding, and chiplet-based architectures, has introduced new physical design challenges that are not captured by existing planar benchmarks. Although several 3D-IC design examples have been reported, publicly accessible and scalable benchmark suites that enable reproducible evaluation across different 3D physical design problems remain limited. In this paper, we present an open-source suite of 3D-IC benchmark testcases derived from representative chiplet-based case studies in CATCH, an open-source framework for estimating the cost of heterogeneous integration architectures. The proposed benchmark suite provides reusable virtual chiplet models covering compute, memory, I/O, analog, and substrate components. Each testcase captures essential physical design characteristics of 3D systems, including heterogeneous die integration, inter-die connectivity, and technology-dependent design constraints. By publicly releasing these benchmarks, we aim to establish a common evaluation platform and accelerate community-wide research progress in 3D heterogeneous integration.

Closest papers

Nearest neighbours by meaning across the whole index.

DT-MATCH: Defect- and Topology-Aware Chiplet Matching for Yield Optimization in Heterogeneous Integration

cs.AR ·2026-11-14 ·Xuanyi Tan, Sanmitra Banerjee, Dhruv Thapar, Sreejit Chakravarty, Krishnendu Chakrabarty
top venue similarity 0.68
Abstract

Heterogeneous integration (HI) and advanced packaging enable chiplet-based system-on-chip (SoC) designs; however, they also introduce new yield challenges arising from manufacturing defects and complex die-to-die (D2D) interconnect constraints. In particular, lane-level defects, limited spares, and strict structural compatibility requirements impede the efficient assembly of functional systems from defective but repairable chiplets. We present DT-MATCH, a defect- and topology-aware chiplet matching framework that maximizes the number of functional SoCs under realistic assembly constraints. DT-MATCH provides two complementary approaches. The integer linear programming (ILP)-based approach is implemented using a batching strategy to approximate the exact formulation. The greedy randomized adaptive search procedure (GRASP)-based approach provides substantial acceleration, but it does not guarantee yield optimality. Both approaches use a preprocessing pipeline to reduce the problem size. Experimental results on industrial designs demonstrate that, as expected, the ILP-based approach achieves superior solution quality. The GRASP-based approach leads to lower runtimes while still achieving solution quality that is comparable to the ILP-based solution. Together, these methods provide a trade-off between solution quality and efficiency for practical chiplet assembly optimization.

0.34

IC-ThermBench: An Open, Progressive Benchmark for Generalizable 2.5D/3D-IC Thermal Learning

cs.CE ·2026-08-25 ·David Hang, Wenkai Yang, Kuiye Ding, Haiyang Xin, Jacky Wei
benchmarkcode/data similarity 0.68
Abstract · Project site: https://github.com/Day333/ThermalBench

Standardized benchmarks are fundamental to reliable progress in AI for EDA, including learning-based thermal modeling. However, existing thermal prediction studies often rely on different datasets, simulators, data splits, preprocessing pipelines, and metrics, while most datasets and implementations remain unavailable, making fair and reproducible comparison difficult. We introduce IC-ThermBench, an open and progressive benchmark that combines established 3D-IC steady-state, transient, and industrial package tasks with a new 50,000-sample 2.5D chiplet extension designed to evaluate progressively broader represented physical variation and cross-package OOD transfer. Five Generalization Scopes cover 3D-IC fixed-design prediction, Within-Family Generalization under layout, material, and boundary-condition variation, and Cross-Package OOD transfer to unseen package systems. We evaluate eight representative baselines under common data, splits, labels, and metrics. Performance degrades gradually from S2 to S4 as represented physical support broadens, but Cross-Package OOD produces a much sharper degradation: the best RMSE and MAE increase from 1.216 and 0.938~K at S4 to 15.99 and 15.00~K at S5, respectively. With only 10 labeled samples per OOD case, target-domain adaptation reduces the best MAE to 2.60~K. IC-ThermBench further provides a unified generation, training, inference, and evaluation pipeline, enabling reproducible and fair comparison of existing and new thermal predictor.

0.32

Testyard Benchmarks: a Dynamic RISC-V-based Benchmark Framework including DfT insertion, Structural and Functional Test Flows

cs.AR ·2026-11-10 ·Francesco Angione, Nicola di Gruttola Giardino, Gabriele Filipponi, Giusy Iaria, Irith Pomeranz +1 more
benchmarkcode/data similarity 0.64
Abstract

The main challenge of modern computing manufacturing is to produce silicon products capable of operating under the worst possible conditions, both in data centers and under stringent functional safety constraints. These requirements impose exceptionally high quality standards on silicon vendors, while testing costs keep escalating as transistors continue to shrink. Evaluating new testing strategies, however, presents a dual challenge for researchers. Standard academic benchmarks, such as the ITC-99 suite, remain valuable for fast test prototyping, but they lack the structural complexity of modern VLSI devices. Assessing the true computational effort of academic methodologies on industrial scale designs is equally difficult without accessible and scalable models. A further obstacle is the absence of a unified framework able to abstract the commands imposed by each EDA tool and the configurations tied to each technology library, forcing researchers to spend time adapting and debugging fragile scripts. This work addresses both needs by proposing the Testyard framework, built on top of the Chipyard framework, to derive a set of open-source, industrial scale benchmarks. It also extends the Hammer VLSI flow abstraction framework with hardware testing capabilities. Three new functionalities are introduced into Hammer: Design-for-Testability (DfT) insertion, ATPG, and functional tests fault simulation. Each functionality is driven by high-level descriptions, while the framework translates these inputs into the commands required by each EDA tool. The extended framework is applied to 13 representative SoC configurations from the Chipyard ecosystem, reporting the first comprehensive structural and functional test results across three technology libraries and multiple fault models, including stuck-at, transition delay, and small delay faults.

0.65

LLM-Augmented Bayesian Optimization with Adaptive Policies for Chiplet Design Space Exploration

cs.LG ·2026-10-10 ·Hang Liu, Zhengfei Chen, Zhengrui Chen, Hao Geng, Yu Li +1 more
code/data similarity 0.63
Abstract

Chiplet technology is a key approach for extending Moore's Law. However, its design process is constrained by two primary challenges: the scarcity of early-stage platforms for rapidly evaluating chiplet-based heterogeneous systems, and the complex relationships between design parameters and optimization metrics. To address these challenges, we propose a synergistic framework that integrates a Large Language Model (LLM) with Bayesian Optimization (BO), enabling architectural-level simulation and automated optimization for the 2.5D/3D CPU-GPU heterogeneous chiplets. We extend the open-source chiplet simulator to evaluate 3D designs by supporting graph topologies. Further, to enhance the exploration efficiency of BO, we introduce an LLM that generates high-quality policies to guide the optimization process, enabled by our proposed adaptive directional policy reasoning (ADPR) and an exploration gain-aware fine-tuning method. Finally, we use the policy-guided BO to perform an automated and efficient exploration of the complex chiplet design space. Experiments on 2.5D and 3D chiplet reveal that our framework improves design space exploration efficiency.

0.29

CU-3D: A Scalable Legality-Aware RTL-to-GDS Flow for 3D-IC Physical Design

cs.AR ·2026-11-08 ·Mingjun Wang, Guanqi Li, Yihan Wen, Lancheng Zou, Mingjun Li +8 more
similarity 0.63
Abstract

Face-to-face (F2F) hybrid bonds shorten interdie connections, but data, clock, and power-grid (PG) connections must be realized together. CU-3D is a RTL-to-GDS physical design flow based on commercial EDA tools. It derives role-compatible hybrid-bond (HB) sites from a 17-metal ASAP7-based technology model, complete HB footprints, and constructed PG geometry. To coordinate partitioning with placement flexibility, Scaled refines an inherited 2D placement, whereas Fresh places the receiving die first and uses its pin locations and clock loads to guide placement of the other die. Data and clock HB assignments are jointly optimized while retaining alternative data sites and reserving capacity for subsequent PG assignment. The selected HB sites and stacks are preserved during 3D clock-tree synthesis, supply-aware cell insertion, and routing. Across eleven designs, including a 133-macro processor, the flow achieves zero backend DRC violations and passes signal-connectivity checks. Nine paired designs admit lower-footprint, lower-power implementations; four improve setup WNS. On JPEG, early joint planning gains 87 ps and mobility-aware partitioning gains 346 ps. Path analysis explains why cell-delay savings can outweigh net-delay increases.

0.21

Scaling Up Analog CIM: A Simulation Framework for Topology-Aware Mapping

cs.AR ·2026-11-05 ·Yuxin Ren, Danella Zhao, Huanrui Yang
similarity 0.62
Abstract

Analog compute-in-memory (CIM) enables energy-efficient AI inference by performing in-situ matrix multiplication. The growing demand for deploying larger models motivates chiplet integration to expand CIM capacity. However, simulation abstractions based on local operator costs and aggregate communication metrics obscure the impact of weight-mapping topology when CIM system scales up. We develop a phase analysis that quantifies how strongly mapping topology affects system performance across hardware configurations and how mapping optimization translates into latency gains. To evaluate and exploit this design space, we present Isobar, a simulation platform integrating CIM decompositions, heterogeneous execution, and resource modeling. Validated against silicon measurements and cycle-accurate simulation, Isobar provides reliable cost estimates that enable effective mapping search across model and hardware configurations. For Gemma-7B prefill, Isobar-guided mapping reduces communication time by 23.3% and end-to-end latency by 18.6% relative to the strongest baseline. Isobar's system-level modeling show that analog CIM retains energy-efficiency potential relative to GPU when scaled to thousands of dies, and identify topology-aware mapping as a key design dimension for efficient execution.

0.22

HYDRA: A Heterogeneous Chiplet DSE Framework for Serving Dynamic Hybrid LLM Workloads

cs.AR cs.AIcs.LG ·2026-08-19 ·Jiahao Lin, Alish Kanani, Sangwan Lee, Jaehyun Park, Umit Ogras
published similarity 0.62
Abstract · Accepted at IEEE/ACM ESWEEK (CASES) 2026; the official version will be available in IEEE TCAD

Hybrid Transformer-Mamba large language models (LLMs) enhance long-context efficiency, but their heterogeneous computation and communication patterns complicate efficient hardware acceleration. Chiplet-based architectures offer a scalable solution by integrating specialized compute and memory units. However, the design space spanning static architectural configurations and dynamic runtime policies is prohibitively large to explore exhaustively. To address this challenge, we present HYDRA, a comprehensive design space exploration framework for hybrid LLM serving on heterogeneous chiplet systems. HYDRA jointly explores chiplet composition, placement, inter-chiplet bandwidth provisioning, dynamic batching, and runtime scheduling. It integrates communication-aware placement, dynamic batching, elastic task scheduling, and a fast Markov-based performance estimator that captures multi-tenant runtime dynamics for efficient and accurate exploration. Across all workloads, HYDRA delivers 1.55x the throughput and 43.7 percent lower time-to-first-token on average, with throughput gains reaching up to 2.3x compared to state-of-the-art baselines. These results highlight that co-designing architecture and runtime policies is critical for efficient large-scale LLM serving on heterogeneous chiplet systems.

0.26

Differentiable Partitioning With Dual-Max 3D Wirelength Model and Hybrid Bonding Terminal Awareness for Optimized 3D Placement

cs.ET ·2026-09-06 ·Liwen Jiang, Xu Shi, Rufeng Xiao, Changhao Yan, Rujun Jiang +2 more
similarity 0.61
Abstract

Research on 3D integrated circuits (3D-ICs) physical design has expanded rapidly in recent years, driven by the increasing adoption of hybrid bonding and the demand for higher integration density. Continued scaling of hybrid-bonding pitch supports higher vertical interconnect density and finer-grained circuit partitioning in 3D-ICs. Hybrid bonding-enabled 3D-ICs offer substantial benefits in interconnect scaling and system integration, yet tier assignment remains challenging because it jointly determines 3D wirelength and hybrid bonding terminal (HBT) assignment. This paper presents a differentiable partitioning framework that directly optimizes placement-aware tier assignment for 3D-ICs through gradient-based optimization. Discrete tier assignment is relaxed to continuous probabilities, and a Dual-Max 3D wirelength model is introduced as a placement-aware surrogate for tier-specific half-perimeter wirelength (HPWL). In addition, a terminal-aware cutsize penalty gives higher weights to cross-die nets with predicted HBT overlaps, and a local balance penalty discourages regional area overflow on each tier. On ten OpenROAD benchmarks, our method reduces final die-to-die (D2D) HPWL by 8.05% and 14.81% on average relative to hMETIS and TritonPart, respectively. On the seven benchmarks with available CoPlace results, the average HPWL reduction is 10.33%. The source code for the differentiable partitioner and the integrated 3D placement flow is publicly available to support reproducibility.

0.43