CS Paper Radar

IC-ThermBench: An Open, Progressive Benchmark for Generalizable 2.5D/3D-IC Thermal Learning

David Hang, Wenkai Yang, Kuiye Ding, Haiyang Xin, Jacky Wei

cs.CE ·submitted 2026-08-25 02:10 UTC · v3
benchmarkcode/data

Abstract

Standardized benchmarks are fundamental to reliable progress in AI for EDA, including learning-based thermal modeling. However, existing thermal prediction studies often rely on different datasets, simulators, data splits, preprocessing pipelines, and metrics, while most datasets and implementations remain unavailable, making fair and reproducible comparison difficult. We introduce IC-ThermBench, an open and progressive benchmark that combines established 3D-IC steady-state, transient, and industrial package tasks with a new 50,000-sample 2.5D chiplet extension designed to evaluate progressively broader represented physical variation and cross-package OOD transfer. Five Generalization Scopes cover 3D-IC fixed-design prediction, Within-Family Generalization under layout, material, and boundary-condition variation, and Cross-Package OOD transfer to unseen package systems. We evaluate eight representative baselines under common data, splits, labels, and metrics. Performance degrades gradually from S2 to S4 as represented physical support broadens, but Cross-Package OOD produces a much sharper degradation: the best RMSE and MAE increase from 1.216 and 0.938~K at S4 to 15.99 and 15.00~K at S5, respectively. With only 10 labeled samples per OOD case, target-domain adaptation reduces the best MAE to 2.60~K. IC-ThermBench further provides a unified generation, training, inference, and evaluation pipeline, enabling reproducible and fair comparison of existing and new thermal predictor.

Comment
Project site: https://github.com/Day333/ThermalBench

Closest papers

Nearest neighbours by meaning across the whole index.

A Composable AI-Accelerated Iterative Solver for 3D-IC Thermal Modeling

cs.LG ·2026-10-01 ·Yixing Li, Jiahang Zhou, Zhiyu Zeng, Xin Ai
similarity 0.76
Abstract

Accurate thermal analysis of heterogeneous 2.5D/3D-IC packages is essential yet computationally prohibitive. A single full-package FEM simulation can take hours, while AI-based surrogates treat the entire stack as a monolithic prediction target and must be retrained whenever the die count or topology changes. To address this limitation, this work proposes Domain-Decomposed AI-Accelerated Iterative Solver for Thermal Analysis (DAIST), a composable thermal solver that decomposes the global package simulation into block-level subdomain problems, replaces subdomain solvers with neural operators, and couples them through iterative exchanges of interfacial temperature and heat flux. This local-to-global architecture eliminates the topology lock-in of monolithic models: block-level neural operators can be directly reused in unseen package assemblies without retraining. The iterative coupling strategy further provides a controllable accuracy-runtime tradeoff, where the iteration budget can be adjusted to trade accuracy for runtime. Evaluated on a multi-chiplet system and an advanced packaging system, DAIST achieves up to $178\times$ speedup over traditional FEM solvers with mean temperature errors of 0.068% and 0.323%, respectively, while demonstrating cross-topology reuse of block-level models across structurally distinct package assemblies.

0.06

ThermLeT: Transformer-based Temperature Prediction for 2.5D Chiplet Architecture

cs.AR cs.AIcs.LG ·2026-11-16 ·Varun Darshana Parekh, Anusha Devulapally, Sivani Devarapalli, Cassius Henderson, Shimeng Yu +1 more
publishedcode/data similarity 0.72
Abstract · Published at VLSID 2026. Code and dataset: https://github.com/MicroSystemsDesignLab/ThermLeT

The drive toward heterogeneous 2.5D chiplet packages promises unmatched performance and customization, yet the resulting density amplifies thermal challenges. To facilitate rapid design space exploration, we present ThermLeT, a multimodal transformer-based, scale invariant surrogate that integrates power density maps, spatial coordinate embeddings, material properties and heat transfer rate to predict steady state temperature in 13 ms, about four orders of magnitude faster than conventional finite element solvers such as ANSYS. To train the transformer model, we also create a dataset of 6,221 chiplet layouts perturbed from three representative architectures. On a 150 sample test set, ThermLeT achieves an RMSE of 3.16°C and an MAE of 2.24°C, improving accuracy by 35% over ThermEDGe and by 71% over HotSpot, while running approximately 6x and 11x lower inference latencies respectively. Ablation studies confirm robust generalization to unseen floorplans. Code and dataset available at https://github.com/MicroSystemsDesignLab/ThermLeT

0.60

COOL: A Cooling-Aware Point Transformer Framework for Thermal Prediction in Advanced 3D/3.5D IC Packaging

cs.CE ·2026-08-16 ·Yao Lu, Zhicheng Guo, Qijun Zhang, Shang Liu, Wenji Fang +2 more
publishedbenchmark similarity 0.69
Abstract · 7 pages, accepted at DAC 2026

Advanced 3D and 3.5D IC packaging significantly improves integration density but elevates thermal management challenges due to cross-layer heat coupling and complex cooling structures. Traditional solvers deliver high fidelity but are too slow for iterative design flows, while existing learning-based methods either fail to capture inter-die thermal coupling or treat cooling structures as static components, limiting their applicability in real packaging co-design scenarios. In this work, we introduce COOL, a cooling-aware point transformer framework that represents heterogeneous assemblies (dies, interposers, TIMs, heat spreaders) as annotated 3D point clouds embedding geometric, material and power attributes. COOL explicitly encodes geometric boundaries and cooling structures, and introduces a physics-informed boundary condition (PI-BC) loss to enforce thermal consistency at material interfaces and cooling boundaries. Extensive experiments demonstrate that COOL achieves a remarkable 2.4\% NMAE on our constructed benchmark of multi-package thermal designs, substantially outperforming existing learning-based approaches while providing over 15.7x speedup compared to commercial FEM solvers.

0.28

An Open-Source Benchmark Suite of 3D-IC Testcases

cs.AR ·2026-08-25 ·Rohan Soni, Jooyeon Jeong, Alexander Graening, Anthony Foo, Richard Chen +1 more
benchmarkcode/data similarity 0.68
Abstract

The physical design community has benefited from standardized, publicly available benchmark suites, which have enabled reproducible evaluation and driven significant advances in 2D place-and-route algorithms over the past three decades. However, the emergence of 3D heterogeneous integration technologies, including through-silicon vias (TSVs), hybrid bonding, and chiplet-based architectures, has introduced new physical design challenges that are not captured by existing planar benchmarks. Although several 3D-IC design examples have been reported, publicly accessible and scalable benchmark suites that enable reproducible evaluation across different 3D physical design problems remain limited. In this paper, we present an open-source suite of 3D-IC benchmark testcases derived from representative chiplet-based case studies in CATCH, an open-source framework for estimating the cost of heterogeneous integration architectures. The proposed benchmark suite provides reusable virtual chiplet models covering compute, memory, I/O, analog, and substrate components. Each testcase captures essential physical design characteristics of 3D systems, including heterogeneous die integration, inter-die connectivity, and technology-dependent design constraints. By publicly releasing these benchmarks, we aim to establish a common evaluation platform and accelerate community-wide research progress in 3D heterogeneous integration.

0.32

DeepOHeat-v2: Self-Improving Operator Learning for Fast and Trustworthy Thermal Optimization in 3D-IC Design

cs.LG physics.data-an ·2026-08-17 ·Xinling Yu, Yixing Li, Ziyue Liu, Xin Ai, Zhiyu Zeng +2 more
benchmark similarity 0.66
Abstract

Thermal-aware optimization of multi-die 3D integrated circuits evaluates many designs, each a costly heat-equation solve. Operator-learning surrogates replace this solve with a fast forward pass, ideally trained from physics alone, without labeled data. DeepOHeat-v1 made such surrogates fast and trustworthy, but only on low-contrast geometries. High-contrast multi-die stacks break it in two ways: discontinuous conductivities make the continuous physics loss ill-defined at material interfaces, and ill-conditioning ($κ_2(A_h) \approx 6 \times 10^4$) puts the discretized strong-form loss beyond first-order optimization. We propose DeepOHeat-v2 to overcome both. First, we train on a discretized physics loss that handles the discontinuities natively; its energy form reduces the prediction-space loss-Hessian conditioning from $κ^2$ to $κ$, and a matrix-preconditioned optimizer cuts the mean peak temperature error from over 30 K to 0.55 K. Second, because optimization leaves the training distribution, we propose a self-improving framework: a hotspot trust gate sends flagged placements to a reference solver, and the surrogate incrementally retrains on the refined solutions, keeping an update only when it improves held-out validation error. On a multi-die benchmark, the surrogate-true peak gap on the returned design falls from 1.12 K to 0.11 K, matching a solve-at-every-step optimizer while running $56\times$ faster.

0.26

TherMapNet Attention-Guided Runtime Full-Chip Thermal Map Prediction from Performance Metrics

cs.AR cs.LG ·2026-08-22 ·Qin Gu, Chaofang Ma, Mingyu Yang, Yipu Zhang, Jiliang Zhang +2 more
similarity 0.64
Abstract · IEEE conference format, 8 figures, 2 tables. Submitted to IEEE ICCD. Corresponding author: Lin Jiang

Runtime thermal management of high-performance chips depends on fast and accurate full-chip thermal maps. Conventional simulators typically estimate power traces from performance metrics first, which adds overhead. This work proposes TherMapNet, an attention-guided thermal simulator that predicts full-chip thermal maps directly from performance metrics. A Transformer encoder captures temporal evolution by treating the time series of each metric as a token, improving modeling of dynamic workloads. A CNN then extracts fine-grained spatial features. For the CNN, a dual-branch channel-spatial attention convolution module (DACM) and a triplet loss are used to improve spatial learning and reconstruction accuracy. TherMapNet is applied to a multi-core CPU (AMD Ryzen 7 4800U) and a many-core GPU (NVIDIA GeForce RTX 4060). Experiments show that it outperforms prior thermal simulators, with RMSE below 0.26 C and inference under 2.4 ms on an NVIDIA GeForce RTX 3090 GPU. These results indicate that TherMapNet can support high-quality runtime thermal management of modern multi-core chips.

0.21

SPLIT-MOR: Fast and Accurate Model Order Reduction for Nonlinear Transient Thermal Simulation of 2.5D/3D ICs

cs.CE ·2026-11-13 ·Zebin Shi, Tianxiang Zhu, Yibo Lin, Runsheng Wang
published similarity 0.62
Abstract · Accepted by ASPDAC 2027; 7 pages, 6 figures

Fast and accurate transient thermal simulation is essential to thermal reliability analysis and dynamic thermal management of advanced packages, and model order reduction (MOR) techniques are widely applied to overcome the efficiency bottleneck of rigorous numerical methods. However, nonlinear terms including temperature-dependent leakage power, thermal conductivity, and heat capacity prevent the application of conventional linear MOR, while hyper-reduction solutions require costly nonlinear training data. In this work, we propose SPLIT-MOR (Subdomain-wise Piecewise Linearization with Interval Tensors), a novel nonlinear MOR method that requires no additional training set. SPLIT-MOR computes reduced component tensors by subdomain clustering and temperature-interval partitioning in the offline stage, and updates the reduced coefficient matrices and load vectors efficiently in the online stage. Experimental results show that the online solving time of SPLIT-MOR achieves up to an 830x speedup over COMSOL and a 7.5x speedup over the state-of-the-art hyper-reduction method MDEIM, with a 27x total reduction in the offline time. The relative average error remains below 0.11%, and the maximum error is below 0.86 degrees Celsius, demonstrating the high accuracy of our method.

0.41

Beyond HBM-on-GPU: Thermal Design Envelope for 3D Volumetric DRAM-on-GPU Integration

cs.ET ·2026-09-21 ·Yukai Chen, Melina Lofrano, Khakim Akhunov, Jonas Svedas, Arjun Singh +10 more
published similarity 0.58
Abstract · Presented at the 52nd IEEE European Solid-State Electronics Research Conference (ESSERC 2026), Palma de Mallorca, Spain, September 7-10, 202…

The scaling of GPUs for AI and HPC workloads is increasingly constrained by the capacity, bandwidth, and thermal limits of both 2.5D HBM-GPU and direct-stacked 3D HBM-on-GPU integration. This work establishes the thermal design envelope for 3D volumetric DRAM-on-GPU integration, in which vertically oriented DRAM dies and interleaved cooling cavities reshape heat flow and memory interfacing above the GPU. Using a package-level thermal model anchored to a consistent HBM-on-GPU baseline and driven by a realistic reticle-scale non-uniform GPU power map, we quantify the key parameters governing thermal feasibility. Stack height is the dominant limiter of peak temperature, while cooling-cavity conductivity shifts the feasible region, and mold insertion and stack orientation further modulate thermal behavior. A distributed memory-controller and network-on-chip tier introduces only a moderate thermal penalty. Although die-level parallelism increases bandwidth, the reduction in simulated training time saturates once execution becomes compute-bound. These results define a bounded co-design space across bandwidth, capacity, and thermal constraints for 3D volumetric DRAM-on-GPU integration.

0.38