CS Paper Radar

SPLIT-MOR: Fast and Accurate Model Order Reduction for Nonlinear Transient Thermal Simulation of 2.5D/3D ICs

Zebin Shi, Tianxiang Zhu, Yibo Lin, Runsheng Wang

cs.CE ·submitted 2026-11-13 03:19 UTC · v1
published

Abstract

Fast and accurate transient thermal simulation is essential to thermal reliability analysis and dynamic thermal management of advanced packages, and model order reduction (MOR) techniques are widely applied to overcome the efficiency bottleneck of rigorous numerical methods. However, nonlinear terms including temperature-dependent leakage power, thermal conductivity, and heat capacity prevent the application of conventional linear MOR, while hyper-reduction solutions require costly nonlinear training data. In this work, we propose SPLIT-MOR (Subdomain-wise Piecewise Linearization with Interval Tensors), a novel nonlinear MOR method that requires no additional training set. SPLIT-MOR computes reduced component tensors by subdomain clustering and temperature-interval partitioning in the offline stage, and updates the reduced coefficient matrices and load vectors efficiently in the online stage. Experimental results show that the online solving time of SPLIT-MOR achieves up to an 830x speedup over COMSOL and a 7.5x speedup over the state-of-the-art hyper-reduction method MDEIM, with a 27x total reduction in the offline time. The relative average error remains below 0.11%, and the maximum error is below 0.86 degrees Celsius, demonstrating the high accuracy of our method.

Comment
Accepted by ASPDAC 2027; 7 pages, 6 figures

Closest papers

Nearest neighbours by meaning across the whole index.

A Composable AI-Accelerated Iterative Solver for 3D-IC Thermal Modeling

cs.LG ·2026-10-01 ·Yixing Li, Jiahang Zhou, Zhiyu Zeng, Xin Ai
similarity 0.65
Abstract

Accurate thermal analysis of heterogeneous 2.5D/3D-IC packages is essential yet computationally prohibitive. A single full-package FEM simulation can take hours, while AI-based surrogates treat the entire stack as a monolithic prediction target and must be retrained whenever the die count or topology changes. To address this limitation, this work proposes Domain-Decomposed AI-Accelerated Iterative Solver for Thermal Analysis (DAIST), a composable thermal solver that decomposes the global package simulation into block-level subdomain problems, replaces subdomain solvers with neural operators, and couples them through iterative exchanges of interfacial temperature and heat flux. This local-to-global architecture eliminates the topology lock-in of monolithic models: block-level neural operators can be directly reused in unseen package assemblies without retraining. The iterative coupling strategy further provides a controllable accuracy-runtime tradeoff, where the iteration budget can be adjusted to trade accuracy for runtime. Evaluated on a multi-chiplet system and an advanced packaging system, DAIST achieves up to $178\times$ speedup over traditional FEM solvers with mean temperature errors of 0.068% and 0.323%, respectively, while demonstrating cross-topology reuse of block-level models across structurally distinct package assemblies.

0.06

IC-ThermBench: An Open, Progressive Benchmark for Generalizable 2.5D/3D-IC Thermal Learning

cs.CE ·2026-08-25 ·David Hang, Wenkai Yang, Kuiye Ding, Haiyang Xin, Jacky Wei
benchmarkcode/data similarity 0.62
Abstract · Project site: https://github.com/Day333/ThermalBench

Standardized benchmarks are fundamental to reliable progress in AI for EDA, including learning-based thermal modeling. However, existing thermal prediction studies often rely on different datasets, simulators, data splits, preprocessing pipelines, and metrics, while most datasets and implementations remain unavailable, making fair and reproducible comparison difficult. We introduce IC-ThermBench, an open and progressive benchmark that combines established 3D-IC steady-state, transient, and industrial package tasks with a new 50,000-sample 2.5D chiplet extension designed to evaluate progressively broader represented physical variation and cross-package OOD transfer. Five Generalization Scopes cover 3D-IC fixed-design prediction, Within-Family Generalization under layout, material, and boundary-condition variation, and Cross-Package OOD transfer to unseen package systems. We evaluate eight representative baselines under common data, splits, labels, and metrics. Performance degrades gradually from S2 to S4 as represented physical support broadens, but Cross-Package OOD produces a much sharper degradation: the best RMSE and MAE increase from 1.216 and 0.938~K at S4 to 15.99 and 15.00~K at S5, respectively. With only 10 labeled samples per OOD case, target-domain adaptation reduces the best MAE to 2.60~K. IC-ThermBench further provides a unified generation, training, inference, and evaluation pipeline, enabling reproducible and fair comparison of existing and new thermal predictor.

0.32

DeepOHeat-v2: Self-Improving Operator Learning for Fast and Trustworthy Thermal Optimization in 3D-IC Design

cs.LG physics.data-an ·2026-08-17 ·Xinling Yu, Yixing Li, Ziyue Liu, Xin Ai, Zhiyu Zeng +2 more
benchmark similarity 0.58
Abstract

Thermal-aware optimization of multi-die 3D integrated circuits evaluates many designs, each a costly heat-equation solve. Operator-learning surrogates replace this solve with a fast forward pass, ideally trained from physics alone, without labeled data. DeepOHeat-v1 made such surrogates fast and trustworthy, but only on low-contrast geometries. High-contrast multi-die stacks break it in two ways: discontinuous conductivities make the continuous physics loss ill-defined at material interfaces, and ill-conditioning ($κ_2(A_h) \approx 6 \times 10^4$) puts the discretized strong-form loss beyond first-order optimization. We propose DeepOHeat-v2 to overcome both. First, we train on a discretized physics loss that handles the discontinuities natively; its energy form reduces the prediction-space loss-Hessian conditioning from $κ^2$ to $κ$, and a matrix-preconditioned optimizer cuts the mean peak temperature error from over 30 K to 0.55 K. Second, because optimization leaves the training distribution, we propose a self-improving framework: a hotspot trust gate sends flagged placements to a reference solver, and the surrogate incrementally retrains on the refined solutions, keeping an update only when it improves held-out validation error. On a multi-die benchmark, the surrogate-true peak gap on the returned design falls from 1.12 K to 0.11 K, matching a solve-at-every-step optimizer while running $56\times$ faster.

0.26

COOL: A Cooling-Aware Point Transformer Framework for Thermal Prediction in Advanced 3D/3.5D IC Packaging

cs.CE ·2026-08-16 ·Yao Lu, Zhicheng Guo, Qijun Zhang, Shang Liu, Wenji Fang +2 more
publishedbenchmark similarity 0.55
Abstract · 7 pages, accepted at DAC 2026

Advanced 3D and 3.5D IC packaging significantly improves integration density but elevates thermal management challenges due to cross-layer heat coupling and complex cooling structures. Traditional solvers deliver high fidelity but are too slow for iterative design flows, while existing learning-based methods either fail to capture inter-die thermal coupling or treat cooling structures as static components, limiting their applicability in real packaging co-design scenarios. In this work, we introduce COOL, a cooling-aware point transformer framework that represents heterogeneous assemblies (dies, interposers, TIMs, heat spreaders) as annotated 3D point clouds embedding geometric, material and power attributes. COOL explicitly encodes geometric boundaries and cooling structures, and introduces a physics-informed boundary condition (PI-BC) loss to enforce thermal consistency at material interfaces and cooling boundaries. Extensive experiments demonstrate that COOL achieves a remarkable 2.4\% NMAE on our constructed benchmark of multi-package thermal designs, substantially outperforming existing learning-based approaches while providing over 15.7x speedup compared to commercial FEM solvers.

0.28

ADACT: PDE-Constrained Thermal Hardware/Software Co-Design Adjoint-Driven Optimal Control via Finite Difference Discretization

cs.AR math.OCeess.SYmath.NA ·2026-10-26 ·Don Li
similarity 0.54
Abstract

By virtue of the sheer compute demands of large-scale artificial intelligence (AI) and high-performance computing (HPC), modern multi-core microprocessors suffer from severe power density limits and thermal throttling, entailing an urgent need for principled methods for predictive, physics-informed dynamical thermal management (DTM). Here, we introduce a hardware/software co-design physics-informed PDE-constrained DTM throttling optimal control algorithm, ADACT (Adjoint-Driven Adaptive Co-Design Thermal Control), that minimizes thermal risk and cooling energy overhead while maximizing core execution throughput. The underlying physical temperature field is governed by a two-dimensional nonhomogeneous parabolic reaction-diffusion equation with spatially localized, time-varying power source terms and variable convective cooling subject to nonhomogeneous Dirichlet boundary conditions. We employ a discretization of the continuous state PDE via a Crank-Nicolson finite difference scheme with a 5-point discrete Laplacian operator on a uniform spatial mesh, which preserves unconditional numerical stability and $O(Δx^2 + Δy^2 + Δt^2)$ second-order temporal and spatial accuracy. To efficiently compute exact gradients, we construct and implement a continuous backward-in-time adjoint state method with L-BFGS as our optimization algorithm of choice. The accuracy and second-order convergence rates of both forward state and backward adjoint solvers are quantitatively verified via the Method of Manufactured Solutions (MMS), and gradient accuracy is validated using directional derivative Taylor tests. Numerical experiments demonstrate that ADACT dynamically throttles software power workloads and modulates hardware cooling efforts to strictly uphold physical thermal thresholds while maintaining operational throughput.

0.28

Beyond HBM-on-GPU: Thermal Design Envelope for 3D Volumetric DRAM-on-GPU Integration

cs.ET ·2026-09-21 ·Yukai Chen, Melina Lofrano, Khakim Akhunov, Jonas Svedas, Arjun Singh +10 more
published similarity 0.50
Abstract · Presented at the 52nd IEEE European Solid-State Electronics Research Conference (ESSERC 2026), Palma de Mallorca, Spain, September 7-10, 202…

The scaling of GPUs for AI and HPC workloads is increasingly constrained by the capacity, bandwidth, and thermal limits of both 2.5D HBM-GPU and direct-stacked 3D HBM-on-GPU integration. This work establishes the thermal design envelope for 3D volumetric DRAM-on-GPU integration, in which vertically oriented DRAM dies and interleaved cooling cavities reshape heat flow and memory interfacing above the GPU. Using a package-level thermal model anchored to a consistent HBM-on-GPU baseline and driven by a realistic reticle-scale non-uniform GPU power map, we quantify the key parameters governing thermal feasibility. Stack height is the dominant limiter of peak temperature, while cooling-cavity conductivity shifts the feasible region, and mold insertion and stack orientation further modulate thermal behavior. A distributed memory-controller and network-on-chip tier introduces only a moderate thermal penalty. Although die-level parallelism increases bandwidth, the reduction in simulated training time saturates once execution becomes compute-bound. These results define a bounded co-design space across bandwidth, capacity, and thermal constraints for 3D volumetric DRAM-on-GPU integration.

0.38

Torch-DPhys: A Torch-Native, MOOSE-Compatible Framework for Differentiable Physics Simulation and Hybrid Machine Learning Integration

cs.LG ·2026-10-16 ·Akzhol Almukhametov, Yang Liu
similarity 0.50
Abstract

We present Torch-DPhys, a Torch-native framework implemented in PyTorch for differentiable physics simulation and hybrid physics-machine learning. It implements selected thermal-hydraulic modeling concepts and discretizations from MOOSE's Thermal Hydraulics Module and the System Analysis Module (SAM), with a preliminary extension to continuum mechanics. Native tensor residuals support CPU and GPU execution, compilation of selected numerical kernels, and sparse direct linear solves. Sensitivities are obtained by differentiating executed numerical operations or through discrete adjoints of converged residual equations. Verification combines analytical solutions, reference-code comparisons, and derivative checks. Demonstrations cover plane-strain elasticity, one- and two-loop thermal-hydraulic transients, and an axisymmetric molten-salt fast reactor. For the reactor, comparison with SAM-Lite gives a maximum normalized field discrepancy of 1.13 x 10^-5 over 200 adaptive time steps, demonstrating agreement between the tested discrete implementations. Selected transient sensitivities are assessed using tangent-linear calculations and finite differences on fixed time schedules. Two applications illustrate the framework's connection between simulation and optimization. A residual-adjoint parameter-identification calculation recovers nominal pump head and heating power with relative errors below 0.06% from noiseless synthetic MOOSE observations. A separate three-loop plant demonstration uses solver-in-the-loop training of a predictive controller by differentiating trajectory-level objectives through the thermal-hydraulic simulation. These examples illustrate a foundation for gradient-based inference, control, and coupled physics-machine learning models in nuclear engineering.

0.41

Generative Design of Liquid-Cooling Channels for Thermal Management of 2.5D and 3D Integrated Advanced Packaging

eess.SY ·2026-08-24 ·Michael Acquah, Zheng Liu
similarity 0.50
Abstract · 29 pages, 5 figures

High-power multi-chip packages require increasingly effective cooling as intensive heat is generated within a limited package area. This work presents a physics-guided generative design framework for liquid-cooling channel topology optimization in a 2.7 kW multi-chip package containing two high-power graphics processing units (GPUs) and one central processing unit (CPU). A conditional diffusion model generates symmetric channel layouts using maximum GPU temperature, GPU temperature spread, and pressure drop as performance targets. Generated designs undergo connectivity and dead-end-branch screening and are evaluated using a calibrated reduced-order thermal-fluids model. Based on 5,000 generated layouts, the multi-objective analysis identified the optimal design for thermal properties, with estimated maximum GPU temperature of 70.30 degree Celsius, GPU temperature spread of 24.90 degree Celsius, and pressure drop of 89.72 kPa. Compared to a conventional reference topology, the optimal design reduced the maximum GPU temperature, temperature spread, and pressure drop by 33.6%, 52.5%, and 72.8%, respectively. High-fidelity three-dimensional conjugate heat-transfer simulation in OpenFOAM estimated a maximum GPU temperature of 66.70 degree Celsius and a pressure drop of 92.1 kPa, showing only differences of 8.6% in temperature rise and 2.6% in pressure drop. The results demonstrate that physics-guided generative design based on the reduced-order model can efficiently discover unconventional cooling channel architectures while reducing reliance on repeating computationally expensive simulation.

0.46