CS Paper Radar

Beyond HBM-on-GPU: Thermal Design Envelope for 3D Volumetric DRAM-on-GPU Integration

Yukai Chen, Melina Lofrano, Khakim Akhunov, Jonas Svedas, Arjun Singh, Nathan Laubeuf, Diksha Moolchandani, Anshul Gupta, Matthew Walker, Zsolt Tokei, Geert Van der Plas, Dwaipayan Biswas, Herman Oprins, Julien Ryckaert, James Myers

cs.ET ·submitted 2026-09-21 09:38 UTC · v1
published

Abstract

The scaling of GPUs for AI and HPC workloads is increasingly constrained by the capacity, bandwidth, and thermal limits of both 2.5D HBM-GPU and direct-stacked 3D HBM-on-GPU integration. This work establishes the thermal design envelope for 3D volumetric DRAM-on-GPU integration, in which vertically oriented DRAM dies and interleaved cooling cavities reshape heat flow and memory interfacing above the GPU. Using a package-level thermal model anchored to a consistent HBM-on-GPU baseline and driven by a realistic reticle-scale non-uniform GPU power map, we quantify the key parameters governing thermal feasibility. Stack height is the dominant limiter of peak temperature, while cooling-cavity conductivity shifts the feasible region, and mold insertion and stack orientation further modulate thermal behavior. A distributed memory-controller and network-on-chip tier introduces only a moderate thermal penalty. Although die-level parallelism increases bandwidth, the reduction in simulated training time saturates once execution becomes compute-bound. These results define a bounded co-design space across bandwidth, capacity, and thermal constraints for 3D volumetric DRAM-on-GPU integration.

Comment
Presented at the 52nd IEEE European Solid-State Electronics Research Conference (ESSERC 2026), Palma de Mallorca, Spain, September 7-10, 2026. To appear in the conference proceedings

Closest papers

Nearest neighbours by meaning across the whole index.

M3D-FLOW: A Monolithic 3-D-Stackable Processing-Near-DRAM Architecture for Generative Normalizing Flow Applications

cs.AR cs.ET ·2026-10-19 ·Bipin Thapa Magar, Ishan Thakkar, Sudeep Pasricha
published similarity 0.65
Abstract · 13 pages, 12 figures. Presented in CASES 2026 as a part of ESWEEK 2026. Accepted for publication in IEEE TCAD

Normalizing Flows (NFs) have shown strong results in generative modeling, recently reaching state-of-the-art image generation performance. However, their repetitive, sequential operations limit the computational and memory efficiency achievable with GPUs and TPUs. We propose M3D-FLOW, a novel monolithic 3D-stackable (M3D) DRAM-based processing-near-memory (PNM) architecture that eliminates memory bottlenecks using a Cu-Cu hybrid-bonded logic die integrated with an M3D DRAM die. The M3D DRAM provides dense bank integration and a tiered organization with variable access latencies that M3D-FLOW exploits for the efficient processing of different NF workloads. To maximize compute density while minimizing area, energy, and thermal overhead, M3D-FLOW employs hybrid binary--stochastic floating-point multipliers, performing mantissa multiplication in the stochastic domain and exponent operations in the binary domain. A pipelined execution strategy maps sequential NF stages across dynamically partitioned PE groups, and together with the stochastic hardware, enables M3D-FLOW to achieve at least $6.6\times$ higher performance and $3\times$ better energy efficiency than prior PNM accelerators, with only a 2.2% bits-per-dimension (BPD) increase over bfloat16 and 4.1% over FP32. An analysis of stochastic hardware variants further shows that shorter stochastic bitstreams reduce execution time by up to $3.3\times$ at the cost of higher approximation error, providing a concrete design guide for latency--accuracy trade-offs.

0.26

Architecting the Next Generation of Asynchronous, Distributed GPUs for the AI Era

cs.AR ·2026-08-23 ·Junrui Pan, Weili An, Cesar Avalos Baddouh, Christin David Bose, Ni Kang +7 more
highly cited similarity 0.65
Abstract

The rapid evolution of machine learning workloads has fundamentally transformed GPU hardware, driving architectures toward Multi-Chip Module (MCM) topologies, asynchronous execution primitives, and persistent, multi-phase kernel behaviors. Despite these shifts, cycle-level simulation infrastructure has lagged behind, lacking the native capability to model the physical non-uniformity of modern GPUs alongside the massive scale of state-of-the-art AI workloads. To bridge this gap, we present a cycle-level simulation framework designed to accurately model modern GPU generations, including Ampere, Hopper, and Blackwell. Rigorously validated against physical silicon, the simulator achieves a 99% Pearson correlation coefficient and a 13.4% mean absolute cycle error on the H100 GPU. Utilizing this infrastructure, we conduct architectural case studies to evaluate emerging design trajectories, including chiplet topology scaling, expanded SRAM capacity and bandwidth, and inter-GPU prefetching strategies.

0.39

AI-driven Thermal-aware Data Center Capacity Planning

cs.LG ·2026-10-01 ·Yixing Li, Mark Fenton, Matthew Kaufeler, Ka Ming Leung, Xin Ai +1 more
published similarity 0.65
Abstract · Presented at DesignCon 2026

The emerging of large language models (LLMs) has posed significant challenges to the thermal management of data center. Intense GPU computation for LLMs results in localized hotspots. Moreover, spiking thermal loads during training and inference bursts make real-time cooling response more difficult to predict and control. Thermal-aware capacity planning of data center requires massive expensive high-fidelity CFD simulations. AI models can perform real-time prediction for unseen designs. However, existing works either have large prediction error, or have over-simplified assumptions for data center operations. This work presents an AI-driven framework that can perform thermal-aware capacity planning for a real-world data center in seconds. The embedded AI model learns from numerous key parameters (rack power, server power, server placement, HVAC settings etc.), and provides temperature prediction within milliseconds. This AI model is tested against high-fidelity CFD simulations, and results show that for unseen data center designs, model can achieve high accuracy with 10000X speedup. Driven by the AI model, the authors design the thermal-aware capacity planning framework. This framework can help data center designers and operators instantaneously optimize both workload distribution and HVAC cooling efficiency.

0.13

Evaluating OpenMP Offloading for Intra-node Multi-GPU Programming across NVIDIA, AMD, and Intel Architectures: A 3D Heat Transfer Case Study

cs.DC ·2026-08-12 ·Ezhilmathi Krishnasamy
published similarity 0.64
Abstract

Currently, most supercomputers are equipped with GPUs from manufacturers such as NVIDIA, AMD, or Intel, which provide substantial parallelism and high throughput. It is common for a single compute node (intranode) to host multiple GPUs, typically four or more. Therefore, effectively leveraging all these GPUs within a single compute node is essential for applications in scientific and engineering domains. However, several factors must be considered before utilizing these GPUs for scientific computing, including the implementation of data communication, the programming models available for use across these GPUs, and the level of performance that can be achieved with a single codebase across different GPU architectures and configurations within a single compute node. OpenMP Offloading is a prominent directive-based programming model that can be executed on all three GPU types: NVIDIA, AMD, and Intel. In this research, we present an analysis of the benefits and performance challenges of using OpenMP Offloading to address the 3D heat equations, which involve both primary computation, as well as halo computation and communication. For additional comparison and scalability study, we also consider the Conjugate Gradient method. We investigate how performance varies in relation to native GPU programming models-CUDA for NVIDIA, HIP for AMD, and SYCL for Intel. Furthermore, we demonstrate that OpenMP Offloading can achieve performance improvements of approximately 2x for 2 GPUs and around 4x for 4 GPUs when compared to single-GPU OpenMP Offloading implementations across all three GPU types. This analysis is conducted systematically through various OpenMP Offloading implementations that utilize different low-level APIs for memory allocation, memory transfer options (synchronous, asynchronous, and peer-to-peer), and other native GPU programming models such as CUDA(NVIDIA),HIP(AMD),and SYCL(Intel).

0.22

Generative Design of Liquid-Cooling Channels for Thermal Management of 2.5D and 3D Integrated Advanced Packaging

eess.SY ·2026-08-24 ·Michael Acquah, Zheng Liu
similarity 0.64
Abstract · 29 pages, 5 figures

High-power multi-chip packages require increasingly effective cooling as intensive heat is generated within a limited package area. This work presents a physics-guided generative design framework for liquid-cooling channel topology optimization in a 2.7 kW multi-chip package containing two high-power graphics processing units (GPUs) and one central processing unit (CPU). A conditional diffusion model generates symmetric channel layouts using maximum GPU temperature, GPU temperature spread, and pressure drop as performance targets. Generated designs undergo connectivity and dead-end-branch screening and are evaluated using a calibrated reduced-order thermal-fluids model. Based on 5,000 generated layouts, the multi-objective analysis identified the optimal design for thermal properties, with estimated maximum GPU temperature of 70.30 degree Celsius, GPU temperature spread of 24.90 degree Celsius, and pressure drop of 89.72 kPa. Compared to a conventional reference topology, the optimal design reduced the maximum GPU temperature, temperature spread, and pressure drop by 33.6%, 52.5%, and 72.8%, respectively. High-fidelity three-dimensional conjugate heat-transfer simulation in OpenFOAM estimated a maximum GPU temperature of 66.70 degree Celsius and a pressure drop of 92.1 kPa, showing only differences of 8.6% in temperature rise and 2.6% in pressure drop. The results demonstrate that physics-guided generative design based on the reduced-order model can efficiently discover unconventional cooling channel architectures while reducing reliance on repeating computationally expensive simulation.

0.46

A Composable AI-Accelerated Iterative Solver for 3D-IC Thermal Modeling

cs.LG ·2026-10-01 ·Yixing Li, Jiahang Zhou, Zhiyu Zeng, Xin Ai
similarity 0.62
Abstract

Accurate thermal analysis of heterogeneous 2.5D/3D-IC packages is essential yet computationally prohibitive. A single full-package FEM simulation can take hours, while AI-based surrogates treat the entire stack as a monolithic prediction target and must be retrained whenever the die count or topology changes. To address this limitation, this work proposes Domain-Decomposed AI-Accelerated Iterative Solver for Thermal Analysis (DAIST), a composable thermal solver that decomposes the global package simulation into block-level subdomain problems, replaces subdomain solvers with neural operators, and couples them through iterative exchanges of interfacial temperature and heat flux. This local-to-global architecture eliminates the topology lock-in of monolithic models: block-level neural operators can be directly reused in unseen package assemblies without retraining. The iterative coupling strategy further provides a controllable accuracy-runtime tradeoff, where the iteration budget can be adjusted to trade accuracy for runtime. Evaluated on a multi-chiplet system and an advanced packaging system, DAIST achieves up to $178\times$ speedup over traditional FEM solvers with mean temperature errors of 0.068% and 0.323%, respectively, while demonstrating cross-topology reuse of block-level models across structurally distinct package assemblies.

0.06

Uncovering the Memory Hierarchy of Modern NVIDIA GPUs for Accurate Simulation

cs.AR ·2026-11-10 ·Ziwen Wang, Jiapeng Zhou, Changxi Liu, Dongsheng Wang, Yun Chen
similarity 0.62
Abstract · 14 pages, 8 figures, 6 tables

Emerging artificial intelligence workloads, particularly Large Language Models (LLMs), place unprecedented demands on GPU memory systems. Consequently, architectural innovations increasingly target the memory system to alleviate these bottlenecks. However, existing works still rely on outdated memory hierarchy models that fail to capture the complexities of modern hardware. This fidelity gap leads to inaccurate characterization and could misguide optimization strategies. To bridge this gap, we present GemAtlas, the first systematic reverse engineering of the memory hierarchy in modern NVIDIA GPUs. By developing fine-grained SASS-level benchmarking, we expose critical, previously undocumented micro-architectural details across different cache levels, including cache set associativity, slice-routing and set-indexing hash functions, replacement policies, coherence behavior, and interconnect topologies. We integrate these discovered micro-architecture details into the state-of-the-art GPU simulation framework. The final results demonstrate that GemAtlas reduces the mean absolute percentage error (MAPE) from 31.69% to 22.24% on average across four GPUs. Specifically, GemAtlas reduces the MAPE from 34.04% to 23.98% for real-world LLM operators.

0.22

ThermE: Predictive Management of Shared Thermal Headroom for Sustained LLM Inference on Thermally Constrained Edge SoCs

eess.SY ·2026-09-24 ·Rui Lu, Yuheng Wang, Bozheng Liu
similarity 0.61
Abstract · 13 pages, 16 figures

Compact edge system-on-chip (SoC) platforms increasingly run sustained LLM inference under thermal constraints, while their CPU, GPU, and RAM share a cooling path. Prefill and decode therefore consume shared, time-varying thermal headroom, yet vendor governors react only near hardware throttling thresholds without knowledge of request state or upcoming work. A control decision that improves current performance can thus consume headroom too quickly and degrade subsequent service. In this paper, we present ThermE, a runtime system that predicts and jointly manages shared thermal headroom for sustained LLM inference on edge SoCs. Its Fast LLM-to-Heat Compiler maps the model, requests, runtime state, and candidate actions to domain heats without executing LLMs. A partial differential equation (PDE)-constrained Headroom Predictor uses ThermPINN for offline thermal identification and a Reduced Headroom Predictor (RHP) for low-overhead online uncertainty-calibrated headroom forecasts. An Uncertainty-Aware Action Scheduler then selects actions that balance serving quality and future headroom. We implement ThermE atop vLLM and evaluate it across four LLM inference workloads. The results show that ThermE reduces TTFT and TPOT by 40.55% and 12.17%, respectively, relative to vLLM. It achieves a 5.70% SLO violation rate, compared with 12.30% for the strongest baseline, while its predictor obtains a 1.94 $^\circ$C MAE with 11.50 ms overhead.

0.09