CS Paper Radar

TherMapNet Attention-Guided Runtime Full-Chip Thermal Map Prediction from Performance Metrics

Qin Gu, Chaofang Ma, Mingyu Yang, Yipu Zhang, Jiliang Zhang, Wei Zhang, Lin Jiang

cs.AR cs.LG ·submitted 2026-08-22 10:00 UTC · v1

Abstract

Runtime thermal management of high-performance chips depends on fast and accurate full-chip thermal maps. Conventional simulators typically estimate power traces from performance metrics first, which adds overhead. This work proposes TherMapNet, an attention-guided thermal simulator that predicts full-chip thermal maps directly from performance metrics. A Transformer encoder captures temporal evolution by treating the time series of each metric as a token, improving modeling of dynamic workloads. A CNN then extracts fine-grained spatial features. For the CNN, a dual-branch channel-spatial attention convolution module (DACM) and a triplet loss are used to improve spatial learning and reconstruction accuracy. TherMapNet is applied to a multi-core CPU (AMD Ryzen 7 4800U) and a many-core GPU (NVIDIA GeForce RTX 4060). Experiments show that it outperforms prior thermal simulators, with RMSE below 0.26 C and inference under 2.4 ms on an NVIDIA GeForce RTX 3090 GPU. These results indicate that TherMapNet can support high-quality runtime thermal management of modern multi-core chips.

Comment
IEEE conference format, 8 figures, 2 tables. Submitted to IEEE ICCD. Corresponding author: Lin Jiang

Closest papers

Nearest neighbours by meaning across the whole index.

CARB: A Characterization-Guided Framework for CNN Inference Cost Prediction and Deployment Screening

cs.AR cs.LGcs.PF ·2026-08-11 ·Linh Nguyen, Zhixin Pan
similarity 0.65
Abstract

Accurate pre-deployment estimation of CNN inference cost--energy, latency, and peak memory--is increasingly critical as models are deployed on resource-constrained GPU platforms. Existing approaches rely on FLOPs, latency measurements, or single-device profiling as energy proxies, overlooking the non-linear interactions between architectural design and hardware load. We present a workload characterization study of 13 419 CNN configurations on two GPU platforms (RTX 5090 and RTX 3080) under GPU telemetry, revealing that energy, latency, and memory exhibit fundamentally distinct scaling behaviors: energy and latency diverge by 3x under high computational demand, and cross-GPU transferability differs by target--energy and latency require platform-specific models while memory transfers well across the two tested platforms. Building on these characterization findings, we develop CARB, a cascade-blended ensemble that jointly predicts all three targets with R2 ~0.99, and a two-stage deployment screening workflow that eliminates over 90% of candidates in seconds, reducing large design spaces to a Pareto-prioritized shortlist validated against real hardware.

0.04

IC-ThermBench: An Open, Progressive Benchmark for Generalizable 2.5D/3D-IC Thermal Learning

cs.CE ·2026-08-25 ·David Hang, Wenkai Yang, Kuiye Ding, Haiyang Xin, Jacky Wei
benchmarkcode/data similarity 0.64
Abstract · Project site: https://github.com/Day333/ThermalBench

Standardized benchmarks are fundamental to reliable progress in AI for EDA, including learning-based thermal modeling. However, existing thermal prediction studies often rely on different datasets, simulators, data splits, preprocessing pipelines, and metrics, while most datasets and implementations remain unavailable, making fair and reproducible comparison difficult. We introduce IC-ThermBench, an open and progressive benchmark that combines established 3D-IC steady-state, transient, and industrial package tasks with a new 50,000-sample 2.5D chiplet extension designed to evaluate progressively broader represented physical variation and cross-package OOD transfer. Five Generalization Scopes cover 3D-IC fixed-design prediction, Within-Family Generalization under layout, material, and boundary-condition variation, and Cross-Package OOD transfer to unseen package systems. We evaluate eight representative baselines under common data, splits, labels, and metrics. Performance degrades gradually from S2 to S4 as represented physical support broadens, but Cross-Package OOD produces a much sharper degradation: the best RMSE and MAE increase from 1.216 and 0.938~K at S4 to 15.99 and 15.00~K at S5, respectively. With only 10 labeled samples per OOD case, target-domain adaptation reduces the best MAE to 2.60~K. IC-ThermBench further provides a unified generation, training, inference, and evaluation pipeline, enabling reproducible and fair comparison of existing and new thermal predictor.

0.32

Node-wise Feature Encoding for Neural Performance Prediction

cs.LG ·2026-08-28 ·Matthew Grenier, William Hammer, Andrew Heuer, Nikhil Krishna, Yi Wang +1 more
similarity 0.62
Abstract · 22 pages, 7 figures

As neural networks are increasingly deployed on resource constrained edge devices, accurate prediction of latency and energy is critical for efficient neural architecture search. Existing GNN and transformer based predictors achieve strong results but largely ignore node-level computational cost, limiting their ability to model performance critical operations. To address this, we introduce FeatureFormer, a neural performance predictor that incorporates explicit node-wise encodings of FLOPs, parameter counts, and memory proxies within a gated graph attention architecture. We also present NNEQ, a new large-scale energy consumption dataset that enables unified evaluation of latency and energy prediction. Extensive experiments demonstrate that FeatureFormer achieves state-of-the-art performance across both metrics, including challenging out-of-domain settings. Finally, we show that the proposed encoding is broadly applicable and consistently improves existing predictors with negligible overhead.

0.13

Beyond Affine Reconstruction: Multi-Resolution Transformer DeepONets for the Radiative Transfer Equation

cs.LG ·2026-10-24 ·Tanguy Azéma, Marc Bocquet, Fatiha Nmira, Xiaoyi Lu, Jean-Louis Consalvi +1 more
theory similarity 0.62
Abstract

Radiative heat transfer plays a dominant role in fire simulations, where solving the radiative transfer equation (RTE) is a computational bottleneck. Neural operators can accelerate these computations by learning solution operators from offline simulation data. However, conventional DeepONet surrogates rely on fixed-grid inputs and affine reconstruction, limiting their flexibility across resolutions and their approximation accuracy at a fixed latent dimension. In this paper, we develop a transformer-based DeepONet for multi-resolution RTE surrogate modelling. The proposed approach combines a Perceiver encoder, which maps temperature and absorption coefficient fields at different spatial resolutions into a fixed-size latent representation, with a cross-attention decoder that enables non-affine reconstruction of the radiative intensity. This architecture allows a single model to process inputs at varying resolutions without resampling them onto a common grid. We formulate a computable empirical version of a previously derived theoretical lower bound for affine reconstruction, enabling direct comparison with model errors on the same dataset. Experiments on a two-dimensional pool-fire dataset demonstrate that the proposed approach outperforms autoencoder-based DeepONets in predicting both radiative intensity and incident radiation, with fewer trainable parameters. Power spectral density analysis shows improved preservation of small-scale structures. Both affine baselines remain above the corresponding lower bound at all evaluated ranks, whereas the proposed model achieves a training error below it at one matched latent dimension, demonstrating the potential of non-affine reconstruction to overcome this representational limitation. Experiments on a dataset combining three spatial resolutions confirm the accuracy advantage of the approach at each input resolution.

0.26

AI-driven Thermal-aware Data Center Capacity Planning

cs.LG ·2026-10-01 ·Yixing Li, Mark Fenton, Matthew Kaufeler, Ka Ming Leung, Xin Ai +1 more
published similarity 0.62
Abstract · Presented at DesignCon 2026

The emerging of large language models (LLMs) has posed significant challenges to the thermal management of data center. Intense GPU computation for LLMs results in localized hotspots. Moreover, spiking thermal loads during training and inference bursts make real-time cooling response more difficult to predict and control. Thermal-aware capacity planning of data center requires massive expensive high-fidelity CFD simulations. AI models can perform real-time prediction for unseen designs. However, existing works either have large prediction error, or have over-simplified assumptions for data center operations. This work presents an AI-driven framework that can perform thermal-aware capacity planning for a real-world data center in seconds. The embedded AI model learns from numerous key parameters (rack power, server power, server placement, HVAC settings etc.), and provides temperature prediction within milliseconds. This AI model is tested against high-fidelity CFD simulations, and results show that for unseen data center designs, model can achieve high accuracy with 10000X speedup. Driven by the AI model, the authors design the thermal-aware capacity planning framework. This framework can help data center designers and operators instantaneously optimize both workload distribution and HVAC cooling efficiency.

0.13

Synthetic Thermal Image Generation for Real-Time Animal Detection Under Low-Visibility Conditions

cs.CV ·2026-09-26 ·James Momoh, Khandaker Mamun Ahmed
published similarity 0.61
Abstract · Accepted at The IEEE Cyber Awareness Research Symposium (CARS), 2026

Wildlife-vehicle collisions remain a significant road safety concern, particularly during nighttime and low-visibility conditions when RGB-based perception systems are often unreliable. Thermal imaging offers a promising alternative for detecting animals under poor illumination. However, the limited availability of annotated infrared animal datasets restricts the development of robust deep learning-based detection models. This paper investigates synthetic thermal image generation as a scalable approach for real-time animal detection under low-visibility conditions. A subset of 514 annotated visible-spectrum animal images from the NTLNP dataset is translated into synthetic thermal representations using CycleGAN-Turbo, while a limited real thermal dataset of 60 images is expanded through thermal-focused augmentation. Multiple object detection architectures, including YOLOv8, YOLOv9, YOLOv10, and RT-DETR, are trained independently on synthetic and real thermal datasets and evaluated using precision, recall, mAP@0.5, mAP@0.5:0.95, model size, and inference latency. Experimental results show that synthetic thermal images provide competitive detection performance, with RT-DETR achieving the highest synthetic-data mAP@0.5 of 0.9613. Models trained on augmented real thermal data achieve the strongest overall performance, with YOLOv10s obtaining 0.9879 mAP@0.5 and 0.9571 mAP@0.5:0.95. Computational analysis further indicates that lightweight YOLO variants provide favorable inference latency, supporting their potential for real-time deployment. These findings demonstrate that synthetic thermal imagery can reduce dependence on scarce infrared datasets and support the development of efficient animal detection systems for future vehicle-mounted wildlife collision mitigation applications.

0.25

Beyond HBM-on-GPU: Thermal Design Envelope for 3D Volumetric DRAM-on-GPU Integration

cs.ET ·2026-09-21 ·Yukai Chen, Melina Lofrano, Khakim Akhunov, Jonas Svedas, Arjun Singh +10 more
published similarity 0.60
Abstract · Presented at the 52nd IEEE European Solid-State Electronics Research Conference (ESSERC 2026), Palma de Mallorca, Spain, September 7-10, 202…

The scaling of GPUs for AI and HPC workloads is increasingly constrained by the capacity, bandwidth, and thermal limits of both 2.5D HBM-GPU and direct-stacked 3D HBM-on-GPU integration. This work establishes the thermal design envelope for 3D volumetric DRAM-on-GPU integration, in which vertically oriented DRAM dies and interleaved cooling cavities reshape heat flow and memory interfacing above the GPU. Using a package-level thermal model anchored to a consistent HBM-on-GPU baseline and driven by a realistic reticle-scale non-uniform GPU power map, we quantify the key parameters governing thermal feasibility. Stack height is the dominant limiter of peak temperature, while cooling-cavity conductivity shifts the feasible region, and mold insertion and stack orientation further modulate thermal behavior. A distributed memory-controller and network-on-chip tier introduces only a moderate thermal penalty. Although die-level parallelism increases bandwidth, the reduction in simulated training time saturates once execution becomes compute-bound. These results define a bounded co-design space across bandwidth, capacity, and thermal constraints for 3D volumetric DRAM-on-GPU integration.

0.38

AstraSR: Real-World Thermal Super-Resolution with GPT-6 Astra

cs.CV ·2026-10-05 ·Mengyuan Li, Changhong Fu, Jun Zhang, Ziyu Lu, Yuhang Zhang +1 more
dataset similarity 0.60
Abstract

Real-world thermal super-resolution (SR) is constrained by limited sensor resolution and the difficulty of obtaining corresponding high-resolution (HR) observations for direct model supervision. Conventional SR methods typically construct training pairs by treating captured thermal images with real-world degradations as HR references and applying predefined degradation to generate synthetic low-resolution (LR) inputs. Such a construction not only introduces a domain gap between synthetic and captured LR observations but also retains acquisition degradations in the supervision. To address this issue, we propose AstraSR, a real-world thermal SR method guided by GPT-6 Astra, a frontier multimodal generative model endowed with emergent and transformative visual capabilities. Specifically, we construct a dataset of image pairs by using captured LR thermal images to condition GPT-based HR reference. We develop a direct generative supervision strategy that learns from captured thermal inputs paired with GPT-generated HR references. Pixel, gradient, and perceptual losses jointly supervise the transfer of intensity patterns, structural boundaries, and visual details from the generated references. Qualitative comparisons with seven existing state-of-the-art real-world SR methods show continuous object contours, distinct structural boundaries, and smooth intensity transitions in the thermal scenes. These results demonstrate that AstraSR outperforms existing real-world SR methods in both thermal clarity and structural coherence.

0.16