CS Paper Radar

Synthetic Thermal Image Generation for Real-Time Animal Detection Under Low-Visibility Conditions

James Momoh, Khandaker Mamun Ahmed

cs.CV ·submitted 2026-09-26 21:10 UTC · v1
published

Abstract

Wildlife-vehicle collisions remain a significant road safety concern, particularly during nighttime and low-visibility conditions when RGB-based perception systems are often unreliable. Thermal imaging offers a promising alternative for detecting animals under poor illumination. However, the limited availability of annotated infrared animal datasets restricts the development of robust deep learning-based detection models. This paper investigates synthetic thermal image generation as a scalable approach for real-time animal detection under low-visibility conditions. A subset of 514 annotated visible-spectrum animal images from the NTLNP dataset is translated into synthetic thermal representations using CycleGAN-Turbo, while a limited real thermal dataset of 60 images is expanded through thermal-focused augmentation. Multiple object detection architectures, including YOLOv8, YOLOv9, YOLOv10, and RT-DETR, are trained independently on synthetic and real thermal datasets and evaluated using precision, recall, mAP@0.5, mAP@0.5:0.95, model size, and inference latency. Experimental results show that synthetic thermal images provide competitive detection performance, with RT-DETR achieving the highest synthetic-data mAP@0.5 of 0.9613. Models trained on augmented real thermal data achieve the strongest overall performance, with YOLOv10s obtaining 0.9879 mAP@0.5 and 0.9571 mAP@0.5:0.95. Computational analysis further indicates that lightweight YOLO variants provide favorable inference latency, supporting their potential for real-time deployment. These findings demonstrate that synthetic thermal imagery can reduce dependence on scarce infrared datasets and support the development of efficient animal detection systems for future vehicle-mounted wildlife collision mitigation applications.

Comment
Accepted at The IEEE Cyber Awareness Research Symposium (CARS), 2026

Closest papers

Nearest neighbours by meaning across the whole index.

RGB-to-IR image translation for infrared vehicle detection in unseen UAV domains

cs.CV ·2026-09-02 ·Thijs A. Eker, Ella P. Fokkinga, Jan Erik van Woerden, Elfi I. S. Hofmeijer, Sebastiaan P. Snel +2 more
similarity 0.72
Abstract · Submitted to SPIE Sensors + Imaging 2026

Synthetic training data is crucial for developing vision AI when real-world data is scarce, as in thermal infrared (IR) aerial vehicle detection. While abundant UAV RGB imagery motivates RGB-to-IR translation for data augmentation, unobservable thermal traits (e.g., engine heat) make learning transferable mappings challenging. This work investigates whether modern generative translators can overcome this cross-modal gap to improve infrared vehicle detection on unseen UAV target domains. Translators are trained on paired RGB-IR source datasets and applied to RGB training images from held-out target datasets to generate synthetic IR data. Evaluated methods include supervised GANs, ControlNet-based diffusion models, and foundation-model editing via LoRA. The resulting synthetic IR imagery is used to train RF-DETR vehicle detectors, which are evaluated on unseen IR target test splits across five aerial datasets, with Kust4K and VTUAV serving as target domains. Synthetic IR consistently outperforms RGB and grayscale baselines. Stable Diffusion 3.5 with ControlNet yields the best results, improving mAP from 50.8 to 60.1 on Kust4K and from 25.6 to 38.4 on VTUAV compared to models trained only on source-domain IR data. Increasing output diversity via multiple seeds (+1.1 mAP) and prompt variations (+3.3 mAP) provides additional gains on VTUAV. Although a performance gap to real target IR data remains, generative RGB-to-IR translation effectively mitigates IR data scarcity and improves cross-domain aerial vehicle detection.

0.13

Training with synthetic data for drone detection in thermal imagery

cs.CV cs.AIcs.ETcs.RO ·2026-08-18 ·Tanel Liiv, Sander Soodla, Nzamba Bignoumba, Alma M. Liezenga, Toomas Pruuden
top venue similarity 0.68
Abstract · To be presented at SPIE: Sensors + Imaging, Artificial Intelligence for Security and Defence Applications IV

Ground-to-Air (G2A) drone detection in medium- and long-wave infrared (MWIR/LWIR) imagery is challenging due to reduced texture information, sensor noise, weak thermal contrast, and the scarcity of annotated data. This work investigates a synthetic-first training strategy that combines synthetic scene generation with fine-tuning on real data. We show that synthetic data provides an effective basis for learning initial object representations, while real in-domain thermal imagery is still essential for reliable deployment. Even small amounts of real IR data substantially reduce domain gaps. Our experiments indicate that dataset alignment has a stronger impact on performance than model scale. Finally, our analysis of the dataset suggests that semantic alignment in feature space is the strongest predictor of model performance, while radiometric properties such as entropy and dynamic range also contribute to detection robustness. This work provides a foundation for combining synthetic and real IR data for effective G2A drone detection.

0.28

Physical Adversarial Examples for Person Detectors in Thermal Images Based on 3D Modeling

cs.CV ·2026-08-31 ·Xiaopei Zhu, Siyuan Huang, Zhanhao Hu, Jianmin Li, Jun Zhu +1 more
top venue similarity 0.66
Abstract · Accepted by TPAMI 2025

Thermal Infrared detection is widely used in autonomous driving, medical AI, etc., but its security has only attracted attention recently. We propose infrared adversarial clothing designed to evade thermal person detectors in real-world scenarios. The design of the adversarial clothing is based on 3D modeling, which makes it easier to simulate multiangle scenes near the real world compared to 2D modeling. We optimized the black patch layout pattern of 3D clothing based on the adversarial example technique and made physical adversarial clothing using the aerogel. The idea is to paste a set of square aerogel patches, which display black squares in thermal images, in the inner side of clothing at specific locations with specific orientations. To enhance realism, we propose a method to build infrared 3D models with real infrared photos and develop texture maps for 3D models to simulate varied infrared characteristics over time and location. In physical attacks, we achieved an attack success rate of 80.11\% indoors and 76.85\% outdoors against YOLOv9. In contrast, randomly placed patches yielded much lower success rates (26.53\% indoors and 23.03\% outdoors). The adversarial clothing also showed good transferability to unknown detectors with an ensemble attack method, demonstrating the effectiveness of our approach.

0.66

What Limits Thermal Infrared Drone Detection? A Cross-Dataset Benchmark Analysis

cs.CV ·2026-11-12 ·Tamara R. Lenhard, Jan Kels, Tobias Koch
publishedbenchmark similarity 0.66
Abstract · Accepted at 2027 IEEE/CVF Winter Conference on Applications of Computer Vision Workshops (WACVW), Workshop "Real World Surveillance: Applica…

Thermal infrared (IR) imaging enables drone detection with reduced dependence on ambient illumination, supporting continuous surveillance beyond the limitations of visible-spectrum sensing. However, substantial and often undocumented variability in camera systems, processing pipelines, and annotation practices across public IR drone datasets complicates the assessment of detector performance and cross-domain generalization. To examine these sources of variability and their implications for drone detection, we systematically characterize existing IR datasets and establish an artifact taxonomy reflecting their origins across the acquisition and processing pipeline, encompassing optical and sensor effects, tone mapping and image enhancement, and recording-related artifacts. Focusing on long-wave IR data, we investigate the impact of training data composition and model characteristics on YOLO-based detection performance, generalization, and condition-dependent failure modes. Our results demonstrate that detection performance is governed more strongly by training data composition than by YOLO generation or model capacity, while cross-dataset generalization exhibits pronounced asymmetries. Even the best-performing configuration fails to detect over 40\% of drones, with elevated miss rates for very small targets, cluttered urban backgrounds, and thermal crossover, highlighting the shortcomings of existing datasets.

0.26

Multimodal RGB-Infrared Combination for UAV-Based Wildfire Segmentation: A Comparative Study on FLAME3

cs.CV ·2026-09-01 ·Matheus F. Kovaleski, Luís Garrote, Cristiano Premebida, Jérôme Mendes, João Ruivo Paulo
published similarity 0.65
Abstract · 6 pages, 1 figure, 1 table

Unmanned Aerial Vehicles (UAVs) have emerged as a promising platform for firefighting operations due to their flexibility, low operational cost, and ability to acquire high-resolution imagery in locations that may be difficult or dangerous to access using conventional methods. Recent advances in deep learning have significantly improved the capabilities of UAV-based wildfire monitoring systems. The present work investigates RGB-infrared fusion for binary wildfire segmentation on the FLAME3 dataset. In this Study, RGB and Infrared baselines are compared with three representative fusion strategies across three segmentation architectures, including U-Net, DeepLabV3+, and SegFormer. The key motivation of this work is to analyze the contribution of each modality, evaluate the impact of fusion timing, and examine how different network architectures exploit multimodal information for UAV wildfire delineation. The findings indicate that thermal information plays a dominant role in UAV segmentation and that feature-level multimodal fusion combined with transformer-based architectures offers the most promising direction for future research.

0.40

Contactless Estimation of Respiratory Frequency Using 3D-CNN on Thermal Images

cs.CV ·2026-11-19 ·Federica Gioia, Filippo Pura, Alberto Greco, Dario Piga, Arcangelo Merla +1 more
published similarity 0.65
Abstract

Monitoring physiological parameters such as respiratory rate ($f_R$) is essential for diagnosing and managing various pathological conditions. Thermal imaging offers a promising contactless alternative to traditional methods, which often rely on partially invasive sensors or obtrusive wearable systems. However, existing approaches for $f_R$ estimation from thermal signals typically require extensive pre-processing and manual or semi-automatic region-of-interest (ROI) tracking, limiting their practical applicability. This study proposes a deep learning-based method for estimating $f_R$ directly from thermal videos, eliminating the need for complex pre-processing and ROI tracking. A 3D Convolutional Neural Network (3D-CNN) is developed to operate on raw thermal video data. To address challenges related to small datasets, the model is trained using data augmentation and transfer learning from synthetic datasets. Experimental results demonstrate that the proposed approach achieves a validation $R^2$ score of approximately 0.61 on both pre-processed and raw thermal videos. By simplifying the workflow, this method holds promise for enhancing the feasibility of thermal imaging in real-world applications, such as remote healthcare and driver monitoring in automotive applications.

0.36

Towards Privacy-Preserving Thermal Human Perception from Dataset to Deployment

cs.CV eess.SP ·2026-10-10 ·Kailai Sun, Yue Cui, Xinwei Wang, Zijie Gao, Baoshen Guo +6 more
code/datahot direction similarity 0.63
Abstract

Indoor human perception is the foundation for smart homes and healthcare. However, RGB cameras raise privacy concerns in private indoor environments, while low-resolution thermal cameras provide limited spatial and semantic information. Large-scale indoor thermal datasets and real-world deployments remain limited. Here, we introduce Indoor RGB-T, a large-scale paired RGB--thermal dataset for indoor human perception. The dataset covers 20 indoor rooms and contains 90,576 80x62 thermal frames, 87,016 temporally matched RGB--thermal pairs, and 115,557 annotated human bounding boxes. We establish benchmarks for robust thermal occupant-state detection with 0.75 mAP and occupancy estimation with an accuracy of 0.847 in unseen rooms. We further evaluate RGB-to-thermal and thermal-to-RGB translation, achieving a temperature MAE of 0.654 C and an R2 of 0.923. Finally, we deploy the thermal perception model on a commercial sleep-monitoring system in the real world. Field testing with 100 participants and deployment of approximately 1,000 devices further demonstrate its practical feasibility. We identify practical challenges that motivate future research directions, including environmental thermal interference, sensing range and multi-person occlusion. The code, trained models and partial dataset are available at https://github.com/kailaisun/RGBT and https://huggingface.co/skl24/RGBT.

0.41

Towards benchmarking Western Bluebird detection in the wild

cs.CV ·2026-10-06 ·Estela Monserrat Arriaga Santana, Julian Rosas Scull, Ibeth P. Alarcón, Bibiana Montoya, Aylin Sosa Mejía +1 more
publishedbenchmarkdataset similarity 0.63
Abstract · 15 pages, 4 figures, 10 tables

Bird monitoring in natural environments is challenging due to the small size of some species of birds relative to the scene, background clutter, variability in illumination, and the observers' viewpoint. Progress is further limited by the scarcity of large-scale, realistic datasets, which are essential for understanding behavioral patterns. To address this gap, we introduce a new benchmark dataset for the detection and segmentation of Western bluebirds (Sialia Mexicana), comprising over 6,000 labeled images from 41 recording sessions. The dataset features high-resolution (4K) in-the-wild images in which birds occupy only a small fraction of the image. We evaluated supervised detectors, open-vocabulary models under zero-shot and fine-tuned settings, and segmentation approaches. Supervised detectors remain the most reliable overall, with Faster R-CNN achieving the highest detection mAP and RT-DETR offering the best precision-recall trade-off. Open-vocabulary models perform poorly in zero-shot settings; however, fine-tuning substantially improves their performance, with YOLO-World becoming competitive with supervised methods and achieving the highest precision, F1-score, and mAP@0.5. For segmentation, supervised methods significantly outperform Grounded-SAM and SAM 3: Mask R-CNN achieves the highest mask mAP, while YOLOv8-Seg provides the best precision and fastest inference. A diagnostic analysis further shows that failures are not explained by object size alone, but by a combination of apparent scale, brightness, contrast, clutter, blur, crowding, and recording-session variation. Overall, our findings highlight the difficulty of zero-shot bird detection in cluttered ecological scenes and underscore the importance of domain adaptation in small-object settings.

0.29