CS Paper Radar

Multimodal RGB-Infrared Combination for UAV-Based Wildfire Segmentation: A Comparative Study on FLAME3

Matheus F. Kovaleski, Luís Garrote, Cristiano Premebida, Jérôme Mendes, João Ruivo Paulo

cs.CV ·submitted 2026-09-01 15:18 UTC · v1
published

Abstract

Unmanned Aerial Vehicles (UAVs) have emerged as a promising platform for firefighting operations due to their flexibility, low operational cost, and ability to acquire high-resolution imagery in locations that may be difficult or dangerous to access using conventional methods. Recent advances in deep learning have significantly improved the capabilities of UAV-based wildfire monitoring systems. The present work investigates RGB-infrared fusion for binary wildfire segmentation on the FLAME3 dataset. In this Study, RGB and Infrared baselines are compared with three representative fusion strategies across three segmentation architectures, including U-Net, DeepLabV3+, and SegFormer. The key motivation of this work is to analyze the contribution of each modality, evaluate the impact of fusion timing, and examine how different network architectures exploit multimodal information for UAV wildfire delineation. The findings indicate that thermal information plays a dominant role in UAV segmentation and that feature-level multimodal fusion combined with transformer-based architectures offers the most promising direction for future research.

Comment
6 pages, 1 figure, 1 table

Closest papers

Nearest neighbours by meaning across the whole index.

Scale-based Approach for Active Wildfire Segmentation on Satellite Imagery

cs.CV ·2026-09-01 ·Matheus F. Kovaleski, Cristiano Premebida, João Ruivo Paulo
published similarity 0.81
Abstract · 6 page, 2 figures, 3 tables

Active wildfire mapping from satellite imagery is challenging due to the sparse and highly imbalanced nature of fire pixels, especially in early-stage or low-density fire observations. This work investigates the use of multispectral Landsat-8 imagery for active-fire segmentation under multi-scale wildfire size conditions. We propose a data-driven protocol to characterize fire-region size distributions through connected-component analysis and an interquartile range criterion, enabling the evaluation of model robustness across different local fire-region densities. Three segmentation architectures, U-Net, DeepLabV3+, and SegFormer, are evaluated under different SWIR-based spectral configurations. Results show that U-Net achieves the strongest robustness across the evaluated conditions, SegFormer provides competitive performance, and DeepLabV3+ tends to produce conservative predictions with reduced recall. Across architectures, SWIR2 consistently achieves the strongest or near-best results, highlighting its importance for active-fire segmentation in Landsat-8 imagery. These findings suggest that both spectral band selection and architectural design are critical for robust satellite-based active wildfire mapping trained on low active fire-pixel density images.

0.34

Obscured Wildfire Flame Detection by Spatio-temporal Analysis of Smoke Patterns Using Frame-wise Transformers

cs.CV cs.AI ·2026-11-10 ·Uma Meleti, Abolfazl Razi, Fatemeh Afghah
top venuehot direction similarity 0.78
Abstract · 8 pages, 8 figures. Published in the 2024 20th International Conference on Distributed Computing in Smart Systems and the Internet of Things…

In this paper, we propose a new paradigm in wildfire management for detecting both visible and obscured fire using Deep Learning (DL). The essence of our method is the joint spatial and temporal analysis of RGB videos, embracing the fact that temporal patterns of smoke motions in consecutive video frames can indicate obscured fire flames. This perspective contrasts the traditional approach of independently analyzing images and individual video frames. To this end, we propose a frame-wise transformer architecture that applies an attention mechanism between the consecutive frames while preserving spatial information within frames as opposed to regular attention mechanisms like the non-local block, which combines spatial and temporal information into a single vector. We also optimize the temporal pattern lengths under different spatial resolutions to achieve the highest performance while reducing the computational cost. To investigate the applicability of our method in aerial image processing, we applied it to a curated version of the FLAME2 dataset that includes dual-mode RGB/IR videos. The IR video feed is used to extract ground truth, while the model is trained only on RGB videos to maintain applicability to lowcost commercial drones (which are equipped only with regular cameras) and facilitate processing existing RGB-only datasets. Our proposed method achieves a Segmentation Foreground Dice score of 92.61%, an Object Detection Precision and Recall rate of 93.21% and 91.73%, and clip-level classification accuracy of 98.02%, respectively. We also investigated the efficacy and generalizability of our method through ablation study

0.53

A Sentinel-2 benchmark dataset for deep-learning active-fire segmentation across 25 California wildfires, July 2020-August 2026

eess.IV cs.CVcs.LGeess.SP+1 ·2026-09-14 ·Shreyan Mitra, Mohammadreza Narimani, Parastoo Farajpoor
publishedbenchmarkcode/datahot direction similarity 0.71
Abstract · 13 pages, 9 figures, 5 tables. Published in Data in Brief (Elsevier), Volume 69, Article 113357 (2026). Data: https://doi.org/10.5281/zenodo…

This article describes an open image dataset for developing and evaluating active-fire segmentation methods in satellite imagery. The dataset contains 2,148 image-mask pairs from 25 California wildfires, with acquisitions spanning July 2020 to August 2026. Each image is a 512x512-pixel, three-channel composite derived from Sentinel-2 Level-2A bands B12, B11 and B8A at 20 m spatial sampling. A fixed linear rendering is applied throughout the dataset. Corresponding masks distinguish background, SWIR-rule active fire and invalid observations. The masks were generated from shortwave-infrared brightness and near-infrared contrast, followed by constrained neighborhood growth. The release includes chip-level metadata and an incident-disjoint partition containing 18 training, three validation and four test fires. Among the image pairs, 841 contain active-fire labels; these labels occupy 0.0766% of all grid cells. A mask-blind analyst review covers 233 test chips and provides a separate assessment of the rule-generated labels at chip and connected-component levels. Reference training and evaluation code accompanies the data, including a ResNet-34 U-Net implementation with validation-based checkpoint and threshold selection. The archived images, masks, metadata and review annotations support research on rare-class segmentation, learning from algorithmic labels and transfer across fire incidents. The versioned dataset is deposited on Zenodo, with preparation and reuse software maintained in a public GitHub repository.

0.72

EGM-Det: Entropy-Guided Multimodal Adaptive Fusion for UAV RGB-IR Object Detection

cs.CV ·2026-08-12 ·Cunzheng Fan, Dawei Yan, Guanlin Wang, Xingshuo Yang, Yupeng Jia +2 more
similarity 0.68
Abstract · 14 pages, 7 figures, 6 tables

Joint use of RGB and infrared (IR) imagery can improve UAV-view object detection, but most existing methods fuse multimodal features with static or fixed weights and therefore overlook spatially varying modality reliability. We propose EGM-Det, an entropy-guided multimodal adaptive fusion framework for RGB-IR object detection. EGM-Det employs a dual-stream architecture to preserve modality-specific representations and introduces an Entropy Offset Gate Fusion module for adaptive multi-scale fusion. The module derives shallow entropy priors from input intensity, local entropy, and cross-modal discrepancy, and uses them to guide local offset alignment and spatial-channel gated fusion. It therefore selectively aggregates reliable RGB and infrared cues instead of uniformly combining heterogeneous features. We further introduce cross-modal distillation to regularize the learned fusion gates and reduce fusion degradation. Each student branch extracts complementary knowledge from the cross-modality teacher branch matched to the main branch, while entropy-adaptive supervision emphasizes uncertain modality decisions. Experiments on DroneVehicle, LLVIP, and VEDAI demonstrate state-of-the-art performance across all three benchmarks; in particular, EGM-Det outperforms prior approaches by more than 10 percentage points on VEDAI.

0.40

Temporal Modelling for Burn Scars on Sentinel-3

cs.CV ·2026-09-28 ·Luca Barco, Edoardo Arnaudo, Andrea Bragagnolo, Claudio Rossi, Paolo Garza
benchmarkdataset similarity 0.66
Abstract

Rapid and accurate burn scar delineation from satellite imagery is essential for post-fire damage assessment. Sentinel-3 OLCI, with daily revisit and 21 spectral bands, suits rapid mapping, yet most pipelines treat acquisitions independently, leaving the pre/post-fire change signal unexploited. We present a dataset of 246 wildfire activations (2016-2025) from the Copernicus Emergency Management Service, with Sentinel-3 OLCI temporally paired acquisitions. We benchmark spatial and temporal (ConvLSTM-augmented) variants of three backbones (U-Net, SegFormer, ConvNeXt-UPerNet) under two input modes and spectral configurations. Temporal modeling improves segmentation only when pre-fire frames are included, and a 5-band subset matches the full 21-band OLCI configuration.

0.21

RGB-to-IR image translation for infrared vehicle detection in unseen UAV domains

cs.CV ·2026-09-02 ·Thijs A. Eker, Ella P. Fokkinga, Jan Erik van Woerden, Elfi I. S. Hofmeijer, Sebastiaan P. Snel +2 more
top venue similarity 0.66
Abstract · Submitted to SPIE Sensors + Imaging 2026

Synthetic training data is crucial for developing vision AI when real-world data is scarce, as in thermal infrared (IR) aerial vehicle detection. While abundant UAV RGB imagery motivates RGB-to-IR translation for data augmentation, unobservable thermal traits (e.g., engine heat) make learning transferable mappings challenging. This work investigates whether modern generative translators can overcome this cross-modal gap to improve infrared vehicle detection on unseen UAV target domains. Translators are trained on paired RGB-IR source datasets and applied to RGB training images from held-out target datasets to generate synthetic IR data. Evaluated methods include supervised GANs, ControlNet-based diffusion models, and foundation-model editing via LoRA. The resulting synthetic IR imagery is used to train RF-DETR vehicle detectors, which are evaluated on unseen IR target test splits across five aerial datasets, with Kust4K and VTUAV serving as target domains. Synthetic IR consistently outperforms RGB and grayscale baselines. Stable Diffusion 3.5 with ControlNet yields the best results, improving mAP from 50.8 to 60.1 on Kust4K and from 25.6 to 38.4 on VTUAV compared to models trained only on source-domain IR data. Increasing output diversity via multiple seeds (+1.1 mAP) and prompt variations (+3.3 mAP) provides additional gains on VTUAV. Although a performance gap to real target IR data remains, generative RGB-to-IR translation effectively mitigates IR data scarcity and improves cross-domain aerial vehicle detection.

0.30

Synthetic Thermal Image Generation for Real-Time Animal Detection Under Low-Visibility Conditions

cs.CV ·2026-09-26 ·James Momoh, Khandaker Mamun Ahmed
published similarity 0.65
Abstract · Accepted at The IEEE Cyber Awareness Research Symposium (CARS), 2026

Wildlife-vehicle collisions remain a significant road safety concern, particularly during nighttime and low-visibility conditions when RGB-based perception systems are often unreliable. Thermal imaging offers a promising alternative for detecting animals under poor illumination. However, the limited availability of annotated infrared animal datasets restricts the development of robust deep learning-based detection models. This paper investigates synthetic thermal image generation as a scalable approach for real-time animal detection under low-visibility conditions. A subset of 514 annotated visible-spectrum animal images from the NTLNP dataset is translated into synthetic thermal representations using CycleGAN-Turbo, while a limited real thermal dataset of 60 images is expanded through thermal-focused augmentation. Multiple object detection architectures, including YOLOv8, YOLOv9, YOLOv10, and RT-DETR, are trained independently on synthetic and real thermal datasets and evaluated using precision, recall, mAP@0.5, mAP@0.5:0.95, model size, and inference latency. Experimental results show that synthetic thermal images provide competitive detection performance, with RT-DETR achieving the highest synthetic-data mAP@0.5 of 0.9613. Models trained on augmented real thermal data achieve the strongest overall performance, with YOLOv10s obtaining 0.9879 mAP@0.5 and 0.9571 mAP@0.5:0.95. Computational analysis further indicates that lightweight YOLO variants provide favorable inference latency, supporting their potential for real-time deployment. These findings demonstrate that synthetic thermal imagery can reduce dependence on scarce infrared datasets and support the development of efficient animal detection systems for future vehicle-mounted wildlife collision mitigation applications.

0.25

Early versus Late RGB-Infrared Fusion for Counter-UAV Detection: A Comparative Study

cs.CV ·2026-10-21 ·Alberto De Zan, Denis Tavaris, Gian Luca Foresti, Ivan Scagnetto
published similarity 0.64
Abstract · This version differs from the article published in IEEE Access. It includes revisions requested by the reviewers during the final review rou…

This paper presents a novel strategy for UAV detection through visible (RGB) and infrared (IR) fusion, in order to improve accuracy and precision in harsh environments and weather conditions. In this research, two opposite approaches have been studied and implemented: the first concerns image-level (early) fusion, which merges two different spectra into a single image to which one detector is applied. On the other hand, the second approach, called decision-level (late) fusion, focuses on blending together the output bounding boxes of two different detection pipelines, aiming to create a common result that can be applied to both spectra simultaneously. Both strategies have been extensively tested in a dedicated environment, which included alternating low and high brightness scenes, different backgrounds (sky and ground), distances (5, 25 and 60 m), altitudes and zoom levels (1X, 2X and 4X). These tests allowed for the assessment of actual detection capabilities and system reliability in real-world applications. Furthermore, the two fusion strategies were evaluated and compared over a set of aligned images in order to highlight the better approach of the two. The results indicate that early fusion achieves better raw performance, since it incorporates the thermal information from the beginning of the training process. However, late fusion presents an innovative and useful detection workflow that can be applied in cases of sensor or frame misalignment. Both positive and negative aspects have also been pointed out and discussed, in order to give a more comprehensive overview. Finally, the paper outlines implementation considerations and practical recommendations based on operational priorities. Overall, the findings contribute to the research in RGB-IR fusion modalities, with the goal of enhancing UAV detection capabilities.

0.38