CS Paper Radar

Obscured Wildfire Flame Detection by Spatio-temporal Analysis of Smoke Patterns Using Frame-wise Transformers

Uma Meleti, Abolfazl Razi, Fatemeh Afghah

cs.CV cs.AI ·submitted 2026-11-10 13:37 UTC · v1
top venuehot direction

Abstract

In this paper, we propose a new paradigm in wildfire management for detecting both visible and obscured fire using Deep Learning (DL). The essence of our method is the joint spatial and temporal analysis of RGB videos, embracing the fact that temporal patterns of smoke motions in consecutive video frames can indicate obscured fire flames. This perspective contrasts the traditional approach of independently analyzing images and individual video frames. To this end, we propose a frame-wise transformer architecture that applies an attention mechanism between the consecutive frames while preserving spatial information within frames as opposed to regular attention mechanisms like the non-local block, which combines spatial and temporal information into a single vector. We also optimize the temporal pattern lengths under different spatial resolutions to achieve the highest performance while reducing the computational cost. To investigate the applicability of our method in aerial image processing, we applied it to a curated version of the FLAME2 dataset that includes dual-mode RGB/IR videos. The IR video feed is used to extract ground truth, while the model is trained only on RGB videos to maintain applicability to lowcost commercial drones (which are equipped only with regular cameras) and facilitate processing existing RGB-only datasets. Our proposed method achieves a Segmentation Foreground Dice score of 92.61%, an Object Detection Precision and Recall rate of 93.21% and 91.73%, and clip-level classification accuracy of 98.02%, respectively. We also investigated the efficacy and generalizability of our method through ablation study

Comment
8 pages, 8 figures. Published in the 2024 20th International Conference on Distributed Computing in Smart Systems and the Internet of Things (DCOSS-IoT), pp. 58-65
Journal ref
2024 20th International Conference on Distributed Computing in Smart Systems and the Internet of Things (DCOSS-IoT), pp. 58-65, IEEE, 2024
DOI
10.1109/DCOSS-IoT61029.2024.00019

Closest papers

Nearest neighbours by meaning across the whole index.

Multimodal RGB-Infrared Combination for UAV-Based Wildfire Segmentation: A Comparative Study on FLAME3

cs.CV ·2026-09-01 ·Matheus F. Kovaleski, Luís Garrote, Cristiano Premebida, Jérôme Mendes, João Ruivo Paulo
published similarity 0.78
Abstract · 6 pages, 1 figure, 1 table

Unmanned Aerial Vehicles (UAVs) have emerged as a promising platform for firefighting operations due to their flexibility, low operational cost, and ability to acquire high-resolution imagery in locations that may be difficult or dangerous to access using conventional methods. Recent advances in deep learning have significantly improved the capabilities of UAV-based wildfire monitoring systems. The present work investigates RGB-infrared fusion for binary wildfire segmentation on the FLAME3 dataset. In this Study, RGB and Infrared baselines are compared with three representative fusion strategies across three segmentation architectures, including U-Net, DeepLabV3+, and SegFormer. The key motivation of this work is to analyze the contribution of each modality, evaluate the impact of fusion timing, and examine how different network architectures exploit multimodal information for UAV wildfire delineation. The findings indicate that thermal information plays a dominant role in UAV segmentation and that feature-level multimodal fusion combined with transformer-based architectures offers the most promising direction for future research.

0.40

Attention-Based Spatio-Temporal Approach for Fire and Smoke Detection

cs.CV ·2026-10-14 ·Alireza Mirrashid, Mohammad Khoshbin, Ali Atghaei, Hassan Shahbazi
publishedunusual similarity 0.68
Abstract · published in WASET conference

In various industries, smoke and fire are two of the most important threats in the workplace. One of the common methods for detecting smoke and fire is the use of infrared thermal and smoke sensors, which cannot be used in outdoor applications. Therefore, the use of vision-based methods seems necessary. The problem of smoke and fire detection is spatiotemporal and requires spatiotemporal solutions. This paper presents a method that uses spatial features along with temporal-based features to detect smoke and fire in the scene. It consists of three main parts; the task of each part is to reduce the error of the previous part so that the final model has a robust performance. This method also uses transformer modules to increase the accuracy of the model. The results of our model show the proper performance of the proposed approach in solving the problem of smoke and fire detection and can be used to increase workplace safety.

0.30

Multiclass Semantic Segmentation of Wildland Fire Images Using Context-Aware Centralized Copy-Paste Data Augmentation

cs.CV cs.LG ·2026-09-18 ·Joon Tai Kim, Nishanth Kunchala, Vishv Patel, Tianle Chen, Ziyu Dong +3 more
similarity 0.68
Abstract · 14 pages, 9 figures

Producing accurate annotations for deep learning based image segmentation is both costly and labor intensive. This challenge is especially evident in wildland fire applications, where accurately labeled datasets are scarce due to the difficulty of collecting and annotating dynamic fire scenes. To address this problem, our previous work introduced the Centralized Copy-Paste Data Augmentation (CCPDA) method for semantic segmentation of wildland fire imagery, which generates artificial training samples by randomly pasting fire clusters from source images onto target images. However, random placement can produce contextually unrealistic scenes, such as fire burning on asphalt. In this paper, we present a context-aware strategy designed specifically to improve data quality and realism in small multiclass wildland fire datasets, ensuring that augmented samples remain contextually meaningful. The proposed method restricts fire placement to semantically valid target regions and selects the location whose Ash-Vegetation composition most closely matches the source context. This approach preserves existing fire regions in the target image, prevents unrealistic placements, and maintains contextual accuracy by generating images that resemble real wildland fire scenes. We evaluate the Context-Aware CCPDA strategy through numerical analysis and comparisons with other augmentation methods by a weighted sum-based multi-objective optimization (MOO) approach. The results confirm that the context-aware data augmentation strategy leads to improved segmentation performance and contextual realism, outperforming other augmentation procedures.

0.22

Scale-based Approach for Active Wildfire Segmentation on Satellite Imagery

cs.CV ·2026-09-01 ·Matheus F. Kovaleski, Cristiano Premebida, João Ruivo Paulo
similarity 0.68
Abstract · 6 page, 2 figures, 3 tables

Active wildfire mapping from satellite imagery is challenging due to the sparse and highly imbalanced nature of fire pixels, especially in early-stage or low-density fire observations. This work investigates the use of multispectral Landsat-8 imagery for active-fire segmentation under multi-scale wildfire size conditions. We propose a data-driven protocol to characterize fire-region size distributions through connected-component analysis and an interquartile range criterion, enabling the evaluation of model robustness across different local fire-region densities. Three segmentation architectures, U-Net, DeepLabV3+, and SegFormer, are evaluated under different SWIR-based spectral configurations. Results show that U-Net achieves the strongest robustness across the evaluated conditions, SegFormer provides competitive performance, and DeepLabV3+ tends to produce conservative predictions with reduced recall. Across architectures, SWIR2 consistently achieves the strongest or near-best results, highlighting its importance for active-fire segmentation in Landsat-8 imagery. These findings suggest that both spectral band selection and architectural design are critical for robust satellite-based active wildfire mapping trained on low active fire-pixel density images.

0.23

DailyWildfireCAN: A Dataset and Benchmark for Next-Day Wildfire Spread Prediction in Canada

cs.CV ·2026-11-10 ·Mahacine Ettahri, Hager Radi Abdelwahed, Toluwaleke Olutayo, Daniel Aloise, Gaétan Marceau Caron
benchmark similarity 0.68
Abstract

Wildfires represent a critical ecological and socio-economic challenge in Canada, where vast boreal forests and a warming climate have amplified the frequency and severity of extreme fire seasons. Predicting next-day wildfire spread can support fire management, but requires capturing complex interactions among weather, fuels, and terrain. Deep learning has emerged as a promising approach to learning these relationships from heterogeneous environmental data, yet its development and evaluation depend on representative datasets. Existing deep learning research on wildfire spread relies predominantly on US-focused datasets, leaving Canadian fire environments underrepresented. To address this gap, we present DailyWildfireCAN, a multi-modal, multi-temporal dataset and benchmark for predicting next-day wildfire spread across Canada. The dataset tracks continuous fire progression over multi-day events at a high spatial and temporal resolution of 90-m and 24-hour, respectively. This resolution preserves fine-scale information relevant to fire-edge geometry, local fuel variations, and terrain effects, supporting research toward improved daily wildfire spread forecasting. DailyWildfireCAN covers 2,440 wildfire events across eight fire seasons 2017-2024 and integrates 33 features across diverse modalities, including topography, meteorology, land cover, vegetation and forest structure, human influence indices, and satellite imagery. We establish a comprehensive benchmark comparing mono-temporal and multi-temporal prediction models, accompanied by a multi-dimensional evaluation framework assessing robustness across wildfire characteristics, geographic regions, and temporal conditions, spatial prediction quality, and sensitivity to reference label variations.

0.15

A Sentinel-2 benchmark dataset for deep-learning active-fire segmentation across 25 California wildfires, July 2020-August 2026

eess.IV cs.CVcs.LGeess.SP+1 ·2026-09-14 ·Shreyan Mitra, Mohammadreza Narimani, Parastoo Farajpoor
publishedbenchmarkcode/datahot direction similarity 0.68
Abstract · 13 pages, 9 figures, 5 tables. Published in Data in Brief (Elsevier), Volume 69, Article 113357 (2026). Data: https://doi.org/10.5281/zenodo…

This article describes an open image dataset for developing and evaluating active-fire segmentation methods in satellite imagery. The dataset contains 2,148 image-mask pairs from 25 California wildfires, with acquisitions spanning July 2020 to August 2026. Each image is a 512x512-pixel, three-channel composite derived from Sentinel-2 Level-2A bands B12, B11 and B8A at 20 m spatial sampling. A fixed linear rendering is applied throughout the dataset. Corresponding masks distinguish background, SWIR-rule active fire and invalid observations. The masks were generated from shortwave-infrared brightness and near-infrared contrast, followed by constrained neighborhood growth. The release includes chip-level metadata and an incident-disjoint partition containing 18 training, three validation and four test fires. Among the image pairs, 841 contain active-fire labels; these labels occupy 0.0766% of all grid cells. A mask-blind analyst review covers 233 test chips and provides a separate assessment of the rule-generated labels at chip and connected-component levels. Reference training and evaluation code accompanies the data, including a ResNet-34 U-Net implementation with validation-based checkpoint and threshold selection. The archived images, masks, metadata and review annotations support research on rare-class segmentation, learning from algorithmic labels and transfer across fire incidents. The versioned dataset is deposited on Zenodo, with preparation and reuse software maintained in a public GitHub repository.

0.73

Annual Earth-observation embeddings encode wildfire disturbance and support simplified burned area mapping

cs.CV ·2026-09-22 ·Jovana Knezevic, Clement Atzberger, Zhengpeng Feng, Adam F. A. Pellegrini, Srinivasan Keshav +1 more
benchmark similarity 0.67
Abstract

Medium-resolution (10-30 m) burned area mapping is vital for monitoring wildfires and their impacts, but remains difficult to scale. Existing methods require either curated fire-specific imagery or dense time-series analysis. Here, we tested whether annual Earth-observation embeddings retain wildfire disturbance signals sufficiently to map burned areas without either requirement. Using Tessera and AlphaEarth embeddings, we tested individual burn-scar delineation, mapping of all same-year fires within an area, regional wall-to-wall mapping, cross-continental transfer, and intra-annual fire timing. Tessera strongly encoded wildfire disturbance, allowing even linear models to separate burned from unburned pixels; the signal was weaker in AlphaEarth. Models trained on a single Tessera embedding matched or exceeded equivalent models using paired pre- and post-fire HLS imagery, and outperformed post-fire imagery alone. The same approach mapped all same-year fires within benchmark scenes (F1 = 0.90). Applied across California, with no California fire data used for downstream training, it recovered 97% of reference burned area and detected substantially more small and medium-sized fires than GABAM or MCD64A1. Separately, a model trained on 2018-2021 US fires transferred without retraining to 88 European fires from 2024-2025 (F1 = 0.88). For well-detected fires, ignition timing was recovered with a mean absolute error of 13 days. Performance declined for fires ignited near the end of the calendar year, and wall-to-wall deployment produced systematic false positives in some unseen landscapes. Annual embeddings nevertheless achieve high segmentation accuracy while moving the burden of dense time series processing upstream, providing a promising path towards simpler regional burned area mapping.

0.14

Construction and Evaluation of Machine Learning Models for Near-Real-Time Fire Detection from MTG FCI Imagery

cs.CV ·2026-10-04 ·Asaf Vanunu, Boaz Nadler, Arnon Karnieli
code/data similarity 0.66
Abstract

Geostationary satellite observations are important for wildfire detection and monitoring. The current study evaluates machine learning models for MTG FCI near-real-time fire detection in 1- and 2-km spatial configurations and compares them with threshold-based algorithms. The models were trained and evaluated using VIIRS fire reference data across diverse ecological regions in Europe, Africa, and the Middle East. The key results are that 1-km models significantly outperform both their 2-km variants and operational threshold products. The constructed 1-km models achieved F1 scores higher by up to 0.36 compared to baseline products. Importantly, the 1-km models detected small fires with higher probability compared to competing models. Finally, the models robustly detected fires up to 260 min earlier than baseline products. To support opensource applications, our trained models are publicly available.

0.22