CS Paper Radar

What Limits Thermal Infrared Drone Detection? A Cross-Dataset Benchmark Analysis

Tamara R. Lenhard, Jan Kels, Tobias Koch

cs.CV ·submitted 2026-11-12 12:37 UTC · v1
publishedbenchmark

Abstract

Thermal infrared (IR) imaging enables drone detection with reduced dependence on ambient illumination, supporting continuous surveillance beyond the limitations of visible-spectrum sensing. However, substantial and often undocumented variability in camera systems, processing pipelines, and annotation practices across public IR drone datasets complicates the assessment of detector performance and cross-domain generalization. To examine these sources of variability and their implications for drone detection, we systematically characterize existing IR datasets and establish an artifact taxonomy reflecting their origins across the acquisition and processing pipeline, encompassing optical and sensor effects, tone mapping and image enhancement, and recording-related artifacts. Focusing on long-wave IR data, we investigate the impact of training data composition and model characteristics on YOLO-based detection performance, generalization, and condition-dependent failure modes. Our results demonstrate that detection performance is governed more strongly by training data composition than by YOLO generation or model capacity, while cross-dataset generalization exhibits pronounced asymmetries. Even the best-performing configuration fails to detect over 40\% of drones, with elevated miss rates for very small targets, cluttered urban backgrounds, and thermal crossover, highlighting the shortcomings of existing datasets.

Comment
Accepted at 2027 IEEE/CVF Winter Conference on Applications of Computer Vision Workshops (WACVW), Workshop "Real World Surveillance: Applications and Challenges, 7th"

Closest papers

Nearest neighbours by meaning across the whole index.

Training with synthetic data for drone detection in thermal imagery

cs.CV cs.AIcs.ETcs.RO ·2026-08-18 ·Tanel Liiv, Sander Soodla, Nzamba Bignoumba, Alma M. Liezenga, Toomas Pruuden
top venue similarity 0.75
Abstract · To be presented at SPIE: Sensors + Imaging, Artificial Intelligence for Security and Defence Applications IV

Ground-to-Air (G2A) drone detection in medium- and long-wave infrared (MWIR/LWIR) imagery is challenging due to reduced texture information, sensor noise, weak thermal contrast, and the scarcity of annotated data. This work investigates a synthetic-first training strategy that combines synthetic scene generation with fine-tuning on real data. We show that synthetic data provides an effective basis for learning initial object representations, while real in-domain thermal imagery is still essential for reliable deployment. Even small amounts of real IR data substantially reduce domain gaps. Our experiments indicate that dataset alignment has a stronger impact on performance than model scale. Finally, our analysis of the dataset suggests that semantic alignment in feature space is the strongest predictor of model performance, while radiometric properties such as entropy and dynamic range also contribute to detection robustness. This work provides a foundation for combining synthetic and real IR data for effective G2A drone detection.

0.28

AVID: A Weakly Aligned RGB-Infrared Dataset and Perturbation Benchmark for Tiny Aerial Targets

cs.CV ·2026-10-29 ·Dharini Raghavan, Vishnu Rao, Sethu Selvi S
benchmark similarity 0.68
Abstract · 23 pages, 8 figures

Long-range detection of small drones is complicated by their visual similarity to birds and by the limited detail available from ground-based cameras. Combining visible and infrared observations offers complementary information, but their usefulness depends on target size, cross-modal alignment, and image quality. We present AVID, a benchmark for studying these factors using real RGB-infrared bird-drone surveillance footage originating from the Drone Detection Dataset and curated for the IEEE ICIP 2025 Video and Image Processing Cup. AVID comprises 32,040 corresponding frame pairs from 115 videos, with 35,952 existing bird and drone annotations at $320\times256$ resolution. Targets occupy an unusually narrow size range: 68.1\% have a geometric-mean bounding-box side of 8--16 pixels, and 99.0\% meet the COCO small-object criterion. To characterize the geometric difficulty of combining the modalities, we introduce an object-relative alignment ratio and an alignment burden curve. In a sample of 300 frame pairs, 32.3\% have estimated global translations greater than 5 pixels; among the 264 pairs with matching annotations, 16.3\% exceed one median target side. We further introduce AVID-C, which simulates seven families of image degradation at five severity levels independently in RGB, infrared, or both. A fixed-feature analysis examines how scale, degradation, and added cross-modal shifts affect fitted bird-drone class overlap. At 12--16 pixels, the Bhattacharyya error bounds are 0.148 for RGB, 0.198 for infrared, and 0.046 for their combined features. These values describe separation in the specified feature and density models, not detector accuracy. Together, AVID and AVID-C support scale-aware, alignment-aware, and sensor-specific studies of tiny aerial targets.

0.23

RGB-to-IR image translation for infrared vehicle detection in unseen UAV domains

cs.CV ·2026-09-02 ·Thijs A. Eker, Ella P. Fokkinga, Jan Erik van Woerden, Elfi I. S. Hofmeijer, Sebastiaan P. Snel +2 more
similarity 0.67
Abstract · Submitted to SPIE Sensors + Imaging 2026

Synthetic training data is crucial for developing vision AI when real-world data is scarce, as in thermal infrared (IR) aerial vehicle detection. While abundant UAV RGB imagery motivates RGB-to-IR translation for data augmentation, unobservable thermal traits (e.g., engine heat) make learning transferable mappings challenging. This work investigates whether modern generative translators can overcome this cross-modal gap to improve infrared vehicle detection on unseen UAV target domains. Translators are trained on paired RGB-IR source datasets and applied to RGB training images from held-out target datasets to generate synthetic IR data. Evaluated methods include supervised GANs, ControlNet-based diffusion models, and foundation-model editing via LoRA. The resulting synthetic IR imagery is used to train RF-DETR vehicle detectors, which are evaluated on unseen IR target test splits across five aerial datasets, with Kust4K and VTUAV serving as target domains. Synthetic IR consistently outperforms RGB and grayscale baselines. Stable Diffusion 3.5 with ControlNet yields the best results, improving mAP from 50.8 to 60.1 on Kust4K and from 25.6 to 38.4 on VTUAV compared to models trained only on source-domain IR data. Increasing output diversity via multiple seeds (+1.1 mAP) and prompt variations (+3.3 mAP) provides additional gains on VTUAV. Although a performance gap to real target IR data remains, generative RGB-to-IR translation effectively mitigates IR data scarcity and improves cross-domain aerial vehicle detection.

0.13

Synthetic Thermal Image Generation for Real-Time Animal Detection Under Low-Visibility Conditions

cs.CV ·2026-09-26 ·James Momoh, Khandaker Mamun Ahmed
published similarity 0.66
Abstract · Accepted at The IEEE Cyber Awareness Research Symposium (CARS), 2026

Wildlife-vehicle collisions remain a significant road safety concern, particularly during nighttime and low-visibility conditions when RGB-based perception systems are often unreliable. Thermal imaging offers a promising alternative for detecting animals under poor illumination. However, the limited availability of annotated infrared animal datasets restricts the development of robust deep learning-based detection models. This paper investigates synthetic thermal image generation as a scalable approach for real-time animal detection under low-visibility conditions. A subset of 514 annotated visible-spectrum animal images from the NTLNP dataset is translated into synthetic thermal representations using CycleGAN-Turbo, while a limited real thermal dataset of 60 images is expanded through thermal-focused augmentation. Multiple object detection architectures, including YOLOv8, YOLOv9, YOLOv10, and RT-DETR, are trained independently on synthetic and real thermal datasets and evaluated using precision, recall, mAP@0.5, mAP@0.5:0.95, model size, and inference latency. Experimental results show that synthetic thermal images provide competitive detection performance, with RT-DETR achieving the highest synthetic-data mAP@0.5 of 0.9613. Models trained on augmented real thermal data achieve the strongest overall performance, with YOLOv10s obtaining 0.9879 mAP@0.5 and 0.9571 mAP@0.5:0.95. Computational analysis further indicates that lightweight YOLO variants provide favorable inference latency, supporting their potential for real-time deployment. These findings demonstrate that synthetic thermal imagery can reduce dependence on scarce infrared datasets and support the development of efficient animal detection systems for future vehicle-mounted wildlife collision mitigation applications.

0.25

DroneGround: Open-Vocabulary Drone Payload Characterization Using Synthetic Data and Grounded Vision-Language Models

cs.CV ·2026-09-07 ·Ami Pandat, Rajasekhar Punna, Gopika Vinod, Rohit Shukla
published similarity 0.66
Abstract · Accepted at RVS-SE, British Machine Vision Conference, 2026

Automated drone surveillance has become increasingly important for public safety, critical infrastructure protection,and restricted airspace monitoring. While existing vision-based systems achieve strong performance for drone detection and tracking, reliable payload characterization remains highly challenging under long-range imaging conditions due to limited availability of annotated real-world datasets, and substantial distribution shifts encountered during deployment. Existing approaches formulate payload characterization as a closed-set object detection problem, limiting their ability to recognize previously unseen payloads and generalize beyond the training distribution. To address these challenges, we generate a photorealistic synthetic drone-payload dataset using Unreal Engine 5 and Cosys-AirSim and propose DroneGround: Grounded Vision-Language Payload Characterization, a two-stage framework for robust open-vocabulary payload analysis. DroneGround first employs a YOLO26s detector to localize drones and extract drone-centric image crops, followed by a LoRA-fine-tuned PaliGemma vision-language model that generates seman- tic descriptions of the detected drones and their attached payloads, enabling open-vocabulary payload characterization beyond predefined categories. An occlusion-based grounding module further provides interpretable payload localization by identifying image regions responsible for the generated descriptions. Extensive experiments on both synthetic and real-world drone imagery demonstrate that DroneGround substantially improves robustness under synthetic-to-real distribution shifts, outperforming a conventional closed-set payload detector by improving the F1-score from 82.5% to 96.3%, while achieving significantly better generalization to previously unseen payload categories (80.4%versus 42.7% F1). Dataset and code will be released upon request.

0.49

Early versus Late RGB-Infrared Fusion for Counter-UAV Detection: A Comparative Study

cs.CV ·2026-10-21 ·Alberto De Zan, Denis Tavaris, Gian Luca Foresti, Ivan Scagnetto
published similarity 0.66
Abstract · This version differs from the article published in IEEE Access. It includes revisions requested by the reviewers during the final review rou…

This paper presents a novel strategy for UAV detection through visible (RGB) and infrared (IR) fusion, in order to improve accuracy and precision in harsh environments and weather conditions. In this research, two opposite approaches have been studied and implemented: the first concerns image-level (early) fusion, which merges two different spectra into a single image to which one detector is applied. On the other hand, the second approach, called decision-level (late) fusion, focuses on blending together the output bounding boxes of two different detection pipelines, aiming to create a common result that can be applied to both spectra simultaneously. Both strategies have been extensively tested in a dedicated environment, which included alternating low and high brightness scenes, different backgrounds (sky and ground), distances (5, 25 and 60 m), altitudes and zoom levels (1X, 2X and 4X). These tests allowed for the assessment of actual detection capabilities and system reliability in real-world applications. Furthermore, the two fusion strategies were evaluated and compared over a set of aligned images in order to highlight the better approach of the two. The results indicate that early fusion achieves better raw performance, since it incorporates the thermal information from the beginning of the training process. However, late fusion presents an innovative and useful detection workflow that can be applied in cases of sensor or frame misalignment. Both positive and negative aspects have also been pointed out and discussed, in order to give a more comprehensive overview. Finally, the paper outlines implementation considerations and practical recommendations based on operational priorities. Overall, the findings contribute to the research in RGB-IR fusion modalities, with the goal of enhancing UAV detection capabilities.

0.38

UAV Thermal Imagery for Inert Ordnance Screening: Multi Campaign Dataset Development,Object Detection, and Practical Recommendations

cs.CV ·2026-09-01 ·Chad Melton, PhD., Annabelle Kelton
similarity 0.66
Abstract · Abstract edited to fit format

Unexploded ordnance (UXO) continues to restrict civilian access, agricultural activity, infrastructure recovery, and environmental remediation in contaminated areas around the world. This study created a multi campaign UAV thermal image data set of inert ordnance, developed a labeled image set from collected imagery, tested object detection models, and identified practical considerations for humanitarian mine action and demining applications. Data were collected during four field campaigns in Tennessee under summer and winter conditions using inert mines, munitions, and other ordnance placed in short grass, tall vegetation, gravel, mulch, rock, compost, and compacted surfaces. Thermal imagery was collected under flight altitutes of 33 m and 15 m. The final source inventory contained 5,855 thermal image label pairs, including 918 positive images and 4,937 background images. After retaining all positive images and downsampling background images, the 33 m dataset contained 420 training and 106 validation images, while the 15 m dataset contained 629 training and 157 validation images. YOLOV11l and RT-DETR-R50 algorithms were trained and evaluated to develop an automated candidate detection model. Practical recommendations include collecting thermal and RGB imagery together, incorporating varied surfaces and background only imagery, considering periods following changes in solar exposure, balancing survey coverage against target pixel representation, calibrating models with representative local data, and retaining qualified human review. The intended use is screening and prioritization for follow on technical survey or EOD assessment, and not a standalone clearance.

0.33

Beyond Clear Skies: Synthetic Seasonal and Weather Variations for Real-World Drone Detection

cs.CV ·2026-08-17 ·Tamara R. Lenhard, Andreas Weinmann, Tobias Koch
similarity 0.66
Abstract

Reliable drone detection under real-world deployment conditions requires training data that spans the full operational design domain, including adverse weather and seasonal appearance variation. However, acquiring and annotating such data at scale remains highly resource-intensive, as adverse-weather conditions are inherently difficult to control, reproduce, and sample systematically. Existing datasets therefore typically provide only limited coverage of such conditions. Conversely, synthetic data offers a scalable alternative: environmental variation becomes controllable, while modern game-engine-based pipelines provide realistic rendering and automatic annotations. Leveraging this potential, we introduce SynDroneVision-Weather (SDV-W), an systematic extension of SynDroneVision (SDV) targeting adverse-weather and seasonal domain shifts in urban drone detection. SDV-W comprises 55,187 annotated high-resolution images from three urban environments, rendered across three seasonal configurations and diverse weather conditions, including rain, snow, and fog at multiple severity levels. By preserving SDV's scene and trajectory configuration, SDV-W enables matched clean-adverse comparisons and quantification of condition-specific detector degradation. Across representative YOLO models and real-world datasets, we show that SDV-W improves detector reliability under adverse appearance shifts, reduces missed detections and false alarms, and is most effective as a complement to general-purpose synthetic drone-detection data. SDV-W will be publicly released upon paper acceptance.

0.26