CS Paper Radar

UAV Thermal Imagery for Inert Ordnance Screening: Multi Campaign Dataset Development,Object Detection, and Practical Recommendations

Chad Melton, PhD., Annabelle Kelton

cs.CV ·submitted 2026-09-01 18:07 UTC · v1

Abstract

Unexploded ordnance (UXO) continues to restrict civilian access, agricultural activity, infrastructure recovery, and environmental remediation in contaminated areas around the world. This study created a multi campaign UAV thermal image data set of inert ordnance, developed a labeled image set from collected imagery, tested object detection models, and identified practical considerations for humanitarian mine action and demining applications. Data were collected during four field campaigns in Tennessee under summer and winter conditions using inert mines, munitions, and other ordnance placed in short grass, tall vegetation, gravel, mulch, rock, compost, and compacted surfaces. Thermal imagery was collected under flight altitutes of 33 m and 15 m. The final source inventory contained 5,855 thermal image label pairs, including 918 positive images and 4,937 background images. After retaining all positive images and downsampling background images, the 33 m dataset contained 420 training and 106 validation images, while the 15 m dataset contained 629 training and 157 validation images. YOLOV11l and RT-DETR-R50 algorithms were trained and evaluated to develop an automated candidate detection model. Practical recommendations include collecting thermal and RGB imagery together, incorporating varied surfaces and background only imagery, considering periods following changes in solar exposure, balancing survey coverage against target pixel representation, calibrating models with representative local data, and retaining qualified human review. The intended use is screening and prioritization for follow on technical survey or EOD assessment, and not a standalone clearance.

Comment
Abstract edited to fit format

Closest papers

Nearest neighbours by meaning across the whole index.

Aligned Radiometric RGB-Thermal Fusion for UAV Facade Anomaly Screening

cs.CV eess.IV ·2026-09-11 ·Yuan Yang, Shulei Li, Haobo Liang
dataset similarity 0.68
Abstract · 9 pages, 3 figures. Preprint. Submitted to IEEE Sensors Journal

Unmanned aerial vehicle facade inspection can combine red, green, and blue (RGB) imagery with thermal measurements to screen surface and subsurface anomalies. However, geometric discrepancies between the sensors and thermal image rendering can obscure spatial correspondence and weak temperature contrasts. This article presents a sensor-level pipeline comprising per-sensor correction, RGB-to-thermal registration, common-support cropping, and signed local contrast encoding of 16-bit radiometric measurements. The encoding preserves the distinction between locally hotter and colder regions and supplies the fourth input channel of a compact single-stream detector. We introduce M3T, a dataset of 674 paired RGB and radiometric thermal samples from five facade-inspection projects covering eight component and anomaly categories. The median residual registration error is 3.384 pixels, and a controlled-displacement analysis characterizes how the local contrast response changes under controlled displacement. Project-grouped four-fold evaluation yields mean average precision of 0.168 over intersection-over-union thresholds from 0.5 to 0.95, using 28.50 billion floating-point operations per image. A separate single-split ablation shows improved delamination detection over RGB-only and alternative thermal inputs, although aggregate accuracy does not improve over RGB alone. Evaluation on RGBT-Tiny shows mixed performance with rendered thermal imagery. These results characterize the category-specific benefits and limitations of aligned radiometric contrast for compact facade screening.

0.22

What Limits Thermal Infrared Drone Detection? A Cross-Dataset Benchmark Analysis

cs.CV ·2026-11-12 ·Tamara R. Lenhard, Jan Kels, Tobias Koch
publishedbenchmark similarity 0.66
Abstract · Accepted at 2027 IEEE/CVF Winter Conference on Applications of Computer Vision Workshops (WACVW), Workshop "Real World Surveillance: Applica…

Thermal infrared (IR) imaging enables drone detection with reduced dependence on ambient illumination, supporting continuous surveillance beyond the limitations of visible-spectrum sensing. However, substantial and often undocumented variability in camera systems, processing pipelines, and annotation practices across public IR drone datasets complicates the assessment of detector performance and cross-domain generalization. To examine these sources of variability and their implications for drone detection, we systematically characterize existing IR datasets and establish an artifact taxonomy reflecting their origins across the acquisition and processing pipeline, encompassing optical and sensor effects, tone mapping and image enhancement, and recording-related artifacts. Focusing on long-wave IR data, we investigate the impact of training data composition and model characteristics on YOLO-based detection performance, generalization, and condition-dependent failure modes. Our results demonstrate that detection performance is governed more strongly by training data composition than by YOLO generation or model capacity, while cross-dataset generalization exhibits pronounced asymmetries. Even the best-performing configuration fails to detect over 40\% of drones, with elevated miss rates for very small targets, cluttered urban backgrounds, and thermal crossover, highlighting the shortcomings of existing datasets.

0.26

Training with synthetic data for drone detection in thermal imagery

cs.CV cs.AIcs.ETcs.RO ·2026-08-18 ·Tanel Liiv, Sander Soodla, Nzamba Bignoumba, Alma M. Liezenga, Toomas Pruuden
top venue similarity 0.64
Abstract · To be presented at SPIE: Sensors + Imaging, Artificial Intelligence for Security and Defence Applications IV

Ground-to-Air (G2A) drone detection in medium- and long-wave infrared (MWIR/LWIR) imagery is challenging due to reduced texture information, sensor noise, weak thermal contrast, and the scarcity of annotated data. This work investigates a synthetic-first training strategy that combines synthetic scene generation with fine-tuning on real data. We show that synthetic data provides an effective basis for learning initial object representations, while real in-domain thermal imagery is still essential for reliable deployment. Even small amounts of real IR data substantially reduce domain gaps. Our experiments indicate that dataset alignment has a stronger impact on performance than model scale. Finally, our analysis of the dataset suggests that semantic alignment in feature space is the strongest predictor of model performance, while radiometric properties such as entropy and dynamic range also contribute to detection robustness. This work provides a foundation for combining synthetic and real IR data for effective G2A drone detection.

0.28

Multimodal RGB-Infrared Combination for UAV-Based Wildfire Segmentation: A Comparative Study on FLAME3

cs.CV ·2026-09-01 ·Matheus F. Kovaleski, Luís Garrote, Cristiano Premebida, Jérôme Mendes, João Ruivo Paulo
published similarity 0.62
Abstract · 6 pages, 1 figure, 1 table

Unmanned Aerial Vehicles (UAVs) have emerged as a promising platform for firefighting operations due to their flexibility, low operational cost, and ability to acquire high-resolution imagery in locations that may be difficult or dangerous to access using conventional methods. Recent advances in deep learning have significantly improved the capabilities of UAV-based wildfire monitoring systems. The present work investigates RGB-infrared fusion for binary wildfire segmentation on the FLAME3 dataset. In this Study, RGB and Infrared baselines are compared with three representative fusion strategies across three segmentation architectures, including U-Net, DeepLabV3+, and SegFormer. The key motivation of this work is to analyze the contribution of each modality, evaluate the impact of fusion timing, and examine how different network architectures exploit multimodal information for UAV wildfire delineation. The findings indicate that thermal information plays a dominant role in UAV segmentation and that feature-level multimodal fusion combined with transformer-based architectures offers the most promising direction for future research.

0.40

A2A-UAV: A Multimodal Air-to-Air Dataset for UAV Detection and Identification

cs.CV ·2026-11-16 ·Hongtao Liang, Yiyao Wan, Kezhi Zhu, Jiayi Zhang, Zequn Jiang +4 more
dataset similarity 0.62
Abstract · 27 pages, 9 figures

The rapid growth of unmanned aerial vehicles (UAVs) in low-altitude airspace increases the risk of unauthorized intrusions, making reliable detection and identification of non-cooperative UAVs essential for low-altitude airspace safety. However, the existing public UAV datasets are mostly acquired from fixed ground-based viewpoints and are limited to imaging or radio-frequency (RF) observations, which restricts the sensing coverage and deployment flexibility. To address this gap, we present A2A-UAV, a multimodal air-to-air dataset for UAV detection and identification. Specifically, 15 target UAVs of 13 commercial models were recorded at three outdoor sites under daytime and nighttime conditions by using a UAV-mounted platform equipped with an RGB-thermal gimbal camera, a panoramic camera, an RF spectrum analyzer, and a millimeter-wave radar. The dataset contains 105,294 time-aligned samples of RGB, panoramic, thermal, and RF time-frequency images and radar point clouds. Moreover, all 209,539 bounding boxes of the predominantly small UAV targets were manually annotated and cross-checked. Therefore, A2A-UAV provides a valuable resource for air-to-air UAV detection, identification, and multimodal fusion in low-altitude airspace.

0.42

Synthetic Thermal Image Generation for Real-Time Animal Detection Under Low-Visibility Conditions

cs.CV ·2026-09-26 ·James Momoh, Khandaker Mamun Ahmed
published similarity 0.61
Abstract · Accepted at The IEEE Cyber Awareness Research Symposium (CARS), 2026

Wildlife-vehicle collisions remain a significant road safety concern, particularly during nighttime and low-visibility conditions when RGB-based perception systems are often unreliable. Thermal imaging offers a promising alternative for detecting animals under poor illumination. However, the limited availability of annotated infrared animal datasets restricts the development of robust deep learning-based detection models. This paper investigates synthetic thermal image generation as a scalable approach for real-time animal detection under low-visibility conditions. A subset of 514 annotated visible-spectrum animal images from the NTLNP dataset is translated into synthetic thermal representations using CycleGAN-Turbo, while a limited real thermal dataset of 60 images is expanded through thermal-focused augmentation. Multiple object detection architectures, including YOLOv8, YOLOv9, YOLOv10, and RT-DETR, are trained independently on synthetic and real thermal datasets and evaluated using precision, recall, mAP@0.5, mAP@0.5:0.95, model size, and inference latency. Experimental results show that synthetic thermal images provide competitive detection performance, with RT-DETR achieving the highest synthetic-data mAP@0.5 of 0.9613. Models trained on augmented real thermal data achieve the strongest overall performance, with YOLOv10s obtaining 0.9879 mAP@0.5 and 0.9571 mAP@0.5:0.95. Computational analysis further indicates that lightweight YOLO variants provide favorable inference latency, supporting their potential for real-time deployment. These findings demonstrate that synthetic thermal imagery can reduce dependence on scarce infrared datasets and support the development of efficient animal detection systems for future vehicle-mounted wildlife collision mitigation applications.

0.25

Early versus Late RGB-Infrared Fusion for Counter-UAV Detection: A Comparative Study

cs.CV ·2026-10-21 ·Alberto De Zan, Denis Tavaris, Gian Luca Foresti, Ivan Scagnetto
published similarity 0.60
Abstract · This version differs from the article published in IEEE Access. It includes revisions requested by the reviewers during the final review rou…

This paper presents a novel strategy for UAV detection through visible (RGB) and infrared (IR) fusion, in order to improve accuracy and precision in harsh environments and weather conditions. In this research, two opposite approaches have been studied and implemented: the first concerns image-level (early) fusion, which merges two different spectra into a single image to which one detector is applied. On the other hand, the second approach, called decision-level (late) fusion, focuses on blending together the output bounding boxes of two different detection pipelines, aiming to create a common result that can be applied to both spectra simultaneously. Both strategies have been extensively tested in a dedicated environment, which included alternating low and high brightness scenes, different backgrounds (sky and ground), distances (5, 25 and 60 m), altitudes and zoom levels (1X, 2X and 4X). These tests allowed for the assessment of actual detection capabilities and system reliability in real-world applications. Furthermore, the two fusion strategies were evaluated and compared over a set of aligned images in order to highlight the better approach of the two. The results indicate that early fusion achieves better raw performance, since it incorporates the thermal information from the beginning of the training process. However, late fusion presents an innovative and useful detection workflow that can be applied in cases of sensor or frame misalignment. Both positive and negative aspects have also been pointed out and discussed, in order to give a more comprehensive overview. Finally, the paper outlines implementation considerations and practical recommendations based on operational priorities. Overall, the findings contribute to the research in RGB-IR fusion modalities, with the goal of enhancing UAV detection capabilities.

0.38

RGB-to-IR image translation for infrared vehicle detection in unseen UAV domains

cs.CV ·2026-09-02 ·Thijs A. Eker, Ella P. Fokkinga, Jan Erik van Woerden, Elfi I. S. Hofmeijer, Sebastiaan P. Snel +2 more
similarity 0.60
Abstract · Submitted to SPIE Sensors + Imaging 2026

Synthetic training data is crucial for developing vision AI when real-world data is scarce, as in thermal infrared (IR) aerial vehicle detection. While abundant UAV RGB imagery motivates RGB-to-IR translation for data augmentation, unobservable thermal traits (e.g., engine heat) make learning transferable mappings challenging. This work investigates whether modern generative translators can overcome this cross-modal gap to improve infrared vehicle detection on unseen UAV target domains. Translators are trained on paired RGB-IR source datasets and applied to RGB training images from held-out target datasets to generate synthetic IR data. Evaluated methods include supervised GANs, ControlNet-based diffusion models, and foundation-model editing via LoRA. The resulting synthetic IR imagery is used to train RF-DETR vehicle detectors, which are evaluated on unseen IR target test splits across five aerial datasets, with Kust4K and VTUAV serving as target domains. Synthetic IR consistently outperforms RGB and grayscale baselines. Stable Diffusion 3.5 with ControlNet yields the best results, improving mAP from 50.8 to 60.1 on Kust4K and from 25.6 to 38.4 on VTUAV compared to models trained only on source-domain IR data. Increasing output diversity via multiple seeds (+1.1 mAP) and prompt variations (+3.3 mAP) provides additional gains on VTUAV. Although a performance gap to real target IR data remains, generative RGB-to-IR translation effectively mitigates IR data scarcity and improves cross-domain aerial vehicle detection.

0.13