CS Paper Radar

Physical Adversarial Examples for Person Detectors in Thermal Images Based on 3D Modeling

Xiaopei Zhu, Siyuan Huang, Zhanhao Hu, Jianmin Li, Jun Zhu, Xiaolin Hu

cs.CV ·submitted 2026-08-31 14:09 UTC · v1
top venue

Abstract

Thermal Infrared detection is widely used in autonomous driving, medical AI, etc., but its security has only attracted attention recently. We propose infrared adversarial clothing designed to evade thermal person detectors in real-world scenarios. The design of the adversarial clothing is based on 3D modeling, which makes it easier to simulate multiangle scenes near the real world compared to 2D modeling. We optimized the black patch layout pattern of 3D clothing based on the adversarial example technique and made physical adversarial clothing using the aerogel. The idea is to paste a set of square aerogel patches, which display black squares in thermal images, in the inner side of clothing at specific locations with specific orientations. To enhance realism, we propose a method to build infrared 3D models with real infrared photos and develop texture maps for 3D models to simulate varied infrared characteristics over time and location. In physical attacks, we achieved an attack success rate of 80.11\% indoors and 76.85\% outdoors against YOLOv9. In contrast, randomly placed patches yielded much lower success rates (26.53\% indoors and 23.03\% outdoors). The adversarial clothing also showed good transferability to unknown detectors with an ensemble attack method, demonstrating the effectiveness of our approach.

Comment
Accepted by TPAMI 2025

Closest papers

Nearest neighbours by meaning across the whole index.

Synthetic Thermal Image Generation for Real-Time Animal Detection Under Low-Visibility Conditions

cs.CV ·2026-09-26 ·James Momoh, Khandaker Mamun Ahmed
published similarity 0.66
Abstract · Accepted at The IEEE Cyber Awareness Research Symposium (CARS), 2026

Wildlife-vehicle collisions remain a significant road safety concern, particularly during nighttime and low-visibility conditions when RGB-based perception systems are often unreliable. Thermal imaging offers a promising alternative for detecting animals under poor illumination. However, the limited availability of annotated infrared animal datasets restricts the development of robust deep learning-based detection models. This paper investigates synthetic thermal image generation as a scalable approach for real-time animal detection under low-visibility conditions. A subset of 514 annotated visible-spectrum animal images from the NTLNP dataset is translated into synthetic thermal representations using CycleGAN-Turbo, while a limited real thermal dataset of 60 images is expanded through thermal-focused augmentation. Multiple object detection architectures, including YOLOv8, YOLOv9, YOLOv10, and RT-DETR, are trained independently on synthetic and real thermal datasets and evaluated using precision, recall, mAP@0.5, mAP@0.5:0.95, model size, and inference latency. Experimental results show that synthetic thermal images provide competitive detection performance, with RT-DETR achieving the highest synthetic-data mAP@0.5 of 0.9613. Models trained on augmented real thermal data achieve the strongest overall performance, with YOLOv10s obtaining 0.9879 mAP@0.5 and 0.9571 mAP@0.5:0.95. Computational analysis further indicates that lightweight YOLO variants provide favorable inference latency, supporting their potential for real-time deployment. These findings demonstrate that synthetic thermal imagery can reduce dependence on scarce infrared datasets and support the development of efficient animal detection systems for future vehicle-mounted wildlife collision mitigation applications.

0.25

Adv-Camou: An Emissivity-based Physical Dynamic Adversarial Patch for Infrared Attack

eess.IV ·2026-10-15 ·Zhuo Chen, Xu Zheng, Runyun He, Tuoyu Liu, Kaixuan Ding +8 more
similarity 0.62
Abstract · 11 pages, 5 figures

With the widespread application of infrared object detection technologies in military domains, intelligent infrared adversarial camouflage capabilities have become critical. Existing physical attack methods predominantly employ static thermal suppression strategies, suffering from limited environmental adaptability, insufficient attack robustness, and inadequate visual concealment. This study proposes Adv-Camou, an emissivity-based physical dynamic adversarial patch that achieves paradigm-shifting advancements from static to dynamic attacks through algorithm-material co-innovation. First, a multi-level loss function based on feature confusion mechanisms is designed to deceive detectors by attenuating target saliency and enforcing background feature alignment. Second, adaptive physical transformations and differentiable binarization optimization are integrated to address physical robustness and realizability constraints. A 6*4 array of reversible electrochromic emissivity device is developed and tested across a range of background scenarios, enabling scene-adaptive dynamic camouflage through independent unit control. Experiments demonstrate that this method achieves 95.59% attack success rate (ASR), reducing average precision (AP) by 60.51%. Physical validations show that static adversarial patches attain 76.55% average ASR under multi-view, multi-range, and multi-spectral conditions, while dynamic patches enhance ASR up to 91.55% in complex environments (wilderness/urban) through adaptive switching. The seamless digital-to-physical transfer via tunable emissivity devices transcends the limitations of traditional static camouflage by establishing a dynamic infrared regulation capability. This advancement enhances the battlefield survivability of military assets and demonstrates transformative potential for adaptive camouflage in practical combat scenarios.

0.15

Wearable Logo, Silent Hijack: Stealthy Cross-Modal Semantic Attacks on Visible--Infrared Vision-Language Models

cs.CV ·2026-11-19 ·Qike Zhang, Jiaju Han, Xuelian Shi, Xiang Chen, Dehe Zhao +6 more
similarity 0.61
Abstract

Logos appear naturally on clothing and daily necessities, where their recognizable shapes and semantic associations make them familiar visual cues. This familiarity helps them blend into real-world environments and remain visually inconspicuous. We ask whether an existing logo can serve as a carrier for coordinated targeted semantic attacks on visible-infrared (VIS-IR) vision-language models (VLMs) without changing its original outline. This setting requires expressive adversarial variation within a fixed shape while accounting for different appearance characteristics and model responses across modalities. We propose Logo-guided Semantic Attack (LoSA), a score-based black-box framework that optimizes a logo's interior appearance and placement while preserving its silhouette. LoSA uses a contour field and low-frequency graph spectral modes to structure the interior color layout, a frozen appearance adapter to couple VIS and IR appearances, and particle swarm optimization to jointly optimize shared design parameters. Experiments across four datasets demonstrate that LoSA consistently outperforms the evaluated baselines in simultaneous Top-1 targeted success. Cross-architecture experiments, visual naturalness ratings, and captioning/VQA transfer analyses further characterize its effectiveness and limitations. These findings reveal that familiar visual symbols from real-world environments can serve as shape-preserving carriers for coordinated targeted semantic attacks across imaging modalities.

0.28

Training with synthetic data for drone detection in thermal imagery

cs.CV cs.AIcs.ETcs.RO ·2026-08-18 ·Tanel Liiv, Sander Soodla, Nzamba Bignoumba, Alma M. Liezenga, Toomas Pruuden
top venue similarity 0.61
Abstract · To be presented at SPIE: Sensors + Imaging, Artificial Intelligence for Security and Defence Applications IV

Ground-to-Air (G2A) drone detection in medium- and long-wave infrared (MWIR/LWIR) imagery is challenging due to reduced texture information, sensor noise, weak thermal contrast, and the scarcity of annotated data. This work investigates a synthetic-first training strategy that combines synthetic scene generation with fine-tuning on real data. We show that synthetic data provides an effective basis for learning initial object representations, while real in-domain thermal imagery is still essential for reliable deployment. Even small amounts of real IR data substantially reduce domain gaps. Our experiments indicate that dataset alignment has a stronger impact on performance than model scale. Finally, our analysis of the dataset suggests that semantic alignment in feature space is the strongest predictor of model performance, while radiometric properties such as entropy and dynamic range also contribute to detection robustness. This work provides a foundation for combining synthetic and real IR data for effective G2A drone detection.

0.28

Stealthy in Semantics, Antagonistic in Space: Attacking Visible-Infrared Object Detectors via Object-Level Misalignment

cs.CV ·2026-09-16 ·Yueqi Zhu, Qi Ming, Guo Cheng, Yongkang Zhang, Feiran Liu +4 more
similarity 0.61
Abstract

Visible-infrared object detectors are used for robust perception under challenging illumination and weather conditions. Current physical attacks apply conspicuous patches to spatially aligned target regions, which are noticeable to human observers. Meanwhile, most of these methods only perturb the appearance within the aligned region, without explicitly targeting the correspondence between modalities or the fusion process. In this paper, we propose CamoShift, an adversarial framework for visible-infrared object detection. By combining visual camouflage with object-level infrared shifting, CamoShift breaks cross-modal spatial alignment and disrupts fusion. Specifically, the Semantic Camouflage Module (SCM) generates a stealthy camouflaged patch that can be attached to the host object and maintains its effectiveness in the infrared branch through an RGB-IR adapter. The Object-level Spatial Decoupling Module (OSDM) shifts the infrared target evidence in a scale-aware manner, so as to break object-level correspondence and disrupt cross-modal fusion. Then, the Harmonic Adversarial loss (HarAdv loss) further balances attack strength and visual stealth during optimization. To the best of our knowledge, we are the first to target both visual stealthiness and attack success in visible-infrared object detection. Extensive experimental results show that CamoShift achieves a superior balance between attack effectiveness and visual stealth. Code and models will be available on GitHub.

0.21

TAP3D: Thermal-Assisted 3D Human Point Clouds

cs.CV cs.HC ·2026-10-08 ·Xie Zhang, Chengxiao Li, Xuan Liu, Chenshu Wu
top venuecode/data similarity 0.59
Abstract

Human body point clouds are a versatile representation for AI-enabled human sensing. However, existing methods using LiDAR, radar, and depth cameras suffer from inherent drawbacks in high cost, sparse reconstruction, and privacy concerns, etc. In this paper, we exploit low-cost thermal arrays and present TAP3D, the first system to reconstruct 3D human point clouds from body heat signatures, offering significant advantages in cost, density, human sensitivity, and privacy. To overcome major challenges in depth estimation, thermal interference, and multi-person separation, we propose a novel physics-informed design, which integrates a forward thermal physics model with two distinct modules: multi-primitive estimation for self-supervised joint recovery of depth and other thermal properties, and geometric perspective fusion for suppressing interference and disentangling multiple people. We implement TAP3D using a single commodity thermal array sensor and build a large-scale dataset (160K samples, 8 environments, 11 users) for evaluation. TAP3D achieves remarkable accuracy for dense point cloud generation, enabling downstream tasks like fall detection (91.46%), indoor tracking (21.86 cm MAE), and human mesh recovery (4.87 cm error). By transforming body heat into point clouds for the first time, TAP3D pioneers a new paradigm for privacy-first, fully passive human sensing for many applications. TAP3D is open-sourced at https://github.com/aiot-lab/TAP3D.

0.53

Towards Privacy-Preserving Thermal Human Perception from Dataset to Deployment

cs.CV eess.SP ·2026-10-10 ·Kailai Sun, Yue Cui, Xinwei Wang, Zijie Gao, Baoshen Guo +6 more
code/datahot direction similarity 0.59
Abstract

Indoor human perception is the foundation for smart homes and healthcare. However, RGB cameras raise privacy concerns in private indoor environments, while low-resolution thermal cameras provide limited spatial and semantic information. Large-scale indoor thermal datasets and real-world deployments remain limited. Here, we introduce Indoor RGB-T, a large-scale paired RGB--thermal dataset for indoor human perception. The dataset covers 20 indoor rooms and contains 90,576 80x62 thermal frames, 87,016 temporally matched RGB--thermal pairs, and 115,557 annotated human bounding boxes. We establish benchmarks for robust thermal occupant-state detection with 0.75 mAP and occupancy estimation with an accuracy of 0.847 in unseen rooms. We further evaluate RGB-to-thermal and thermal-to-RGB translation, achieving a temperature MAE of 0.654 C and an R2 of 0.923. Finally, we deploy the thermal perception model on a commercial sleep-monitoring system in the real world. Field testing with 100 participants and deployment of approximately 1,000 devices further demonstrate its practical feasibility. We identify practical challenges that motivate future research directions, including environmental thermal interference, sensing range and multi-person occlusion. The code, trained models and partial dataset are available at https://github.com/kailaisun/RGBT and https://huggingface.co/skl24/RGBT.

0.41

ARMOR: Manifold-Oriented Training for Adversarially Robust Aerial Object Detection under Data Scarcity

cs.CV cs.CRcs.LG ·2026-08-30 ·Haoran Wang, Matthew Lau, Alec Helbling, Matthew Hull, ShengYun Peng +5 more
similarity 0.59
Abstract · 10 pages, 5 figures

Aerial object detection is increasingly deployed in real-world applications, but models remain vulnerable to physical, universal adversarial patches that cause them to miss objects. Furthermore, defenders face the practical constraint of training data scarcity: aerial imagery is costly to collect and label, so a deployment site typically yields hundreds of images rather than the tens of thousands that adversarial robustness benchmarks assume. To tackle model vulnerability and training data scarcity, we propose Adversarial Robustness with Manifold-Oriented Training (ARMOR), a novel defense that realizes the core insights of on-manifold adversarial training (OMAT) in low-data regimes. ARMOR builds on the insight of OMAT to model the data manifold - the compact structure capturing the data's relevant features - to learn and robustify these features during training. While OMAT relies on the data-intensive operations of training large generative models and adversarial training to achieve this, ARMOR adopts a data-efficient approach that reuses labels the detection task already supplies: ARMOR (i) masks image backgrounds to retain object-relevant features, and (ii) injects randomized patches on objects to improve feature robustness. Our low-data experiments with physically-realizable adversarial patches evaluate both query-free transfer attacks and defense-aware attacks. ARMOR maintains strong clean performance of over 0.90 model confidence, while improving adversarial robustness by up to 0.32 in model confidence over state-of-the-art defenses. Physical experiments with printed patches confirm that these gains survive deployment. Overall, ARMOR translates insights from manifold-based training to defend object detectors amidst training data scarcity.

0.16