CS Paper Radar

Joint Initialization of Flux Networks and Effective Multiplication Factor for Physics-Informed Neural Networks Solving Neutron Diffusion Problems

Qin Hang, Yangdi Yi, Jiayi Li, Xu Wang, Heng Zhang

cs.LG ·submitted 2026-08-26 06:55 UTC · v1
benchmark

Abstract

Efficient determination of the effective multiplication factor (keff) is an important computational task in reactor core neutronics analysis. Physics-informed neural networks (PINNs) incorporate neutron diffusion equations and boundary conditions into network training to efficiently determine the neutron flux distribution and keff. To further improve the efficiency of keff calculations using PINNs, a Joint Initialization Physics-Informed Neural Network (JI-PINN) is proposed in this work. In this method, a low-resolution approximate solution to the K-eigenvalue problem is used to construct a joint initial state for the flux network parameters and keff, and both are then jointly optimized under physical constraints. The proposed method was validated on a two-dimensional two-group two-material case, the IAEA 2D benchmark, a two-dimensional two-group four-material case, and a three-dimensional single-group case. For these test cases, the total computational time was reduced by 25.4%, 38.2%, 49.4%, and 28.9%, respectively, while comparable solution accuracy was maintained. The occurrence of anomalous results associated with marked deviations of keff from the reference value was also reduced. The proposed method provides a more efficient and robust initialization strategy for solving neutron diffusion K-eigenvalue problem with PINNs.

Closest papers

Nearest neighbours by meaning across the whole index.

pcNN-SN: a physics-enhanced predictor-corrector neural network algorithm coupled with the discrete ordinates method for neutron transport equations

cs.LG physics.comp-ph ·2026-09-02 ·Cong Liu, Junxia Wei, Shuai Wang, Heng Yong
similarity 0.65
Abstract · 35 pages, 16 figures

Super-resolution machine learning methods hold promise for addressing the high computational costs associated with high-dimensional features in traditional transport simulations. This paper proposes a physics-enhanced neural network coupling algorithm for discrete ordinates (SN) transport calculations. Based on high- and low-accuracy data, we develop a predictor-corrector neural network (pcNN) to predict correction factors for coarse-grid solutions. Based on transport equations, local physical features containing subgrid-scale information are selected as network inputs. Dimensionless transformation of physical quantities reduces the input space dimensionality and narrows the range of parameter distributions, thereby facilitating network training. Physical constraints are incorporated into the network model, and the corrected solution retains its original conservation properties. pcNN and SN transport sweeps are internally coupled, and numerical solutions are corrected online. Numerical results demonstrate that this algorithm can effectively improve coarse-grid solutions to achieve a level of accuracy comparable to that of fine-grid results. The physics-based network design enables the model to demonstrate a certain degree of reusability under different computational conditions. Compared to mesh refinement, the pcNN-SN algorithm reduces the computation time for the three-dimensional test problems by more than 60%.

0.18

Fuse-PINN: Combining Finite Element Methods and Physics-Informed Neural Networks to enable massively parallel simulations of non-linear PDEs

cs.LG physics.plasm-ph ·2026-11-13 ·Stanislas Pamela, Nicolas Pailliez, Emmanuel Franck, Victor Michel-Dansac, Laurent Navoret +1 more
published similarity 0.57
Abstract · 9 pages plus Appendix, 11 figures, 1 table. Rejected at ICLR

Research in the domain of Physics-Informed Neural Networks applied to PDE modelling has advanced significantly in recent years, providing a wide ecosystem of novel methods. However, one frequent limitation is the inability of PINNs to scale out on High-Performance Computing architectures to address more ambitious challenges, particularly non-linear physics models with turbulent dynamics in large spatial domains. Typical studies restrain demonstrations to toy models with simple physics equations, few variables, and rarely any complex non-linear dynamics evolved over long timescales. Part of the AI community has even adopted the idea that "PINNs don't scale". This work proves otherwise. We present a mathematically robust formulation of Finite-Element-Method for Neural Networks (FEM-NN) implemented into a comprehensive, modular framework: Fuse-PINN. This formulation provides the basis for a sclable parallelisation of Physics-Informed Neural Networks on GPU-based HPC systems. Furthermore, an Energy Natural Gradient Descent optimiser is implemented to allow high-precision convergence. Fuse-PINN is demonstrated on physics models relevant to Magnetic Confinement Fusion, including non-linear convective models with fine-scale dynamics. Near-perfect scaling is achieved on multi-GPU runs with increasing problem size.

0.24

Physics-Informed Error Field Learning: A Post-Training Optimization Framework for Physics-Informed Neural Networks

cs.LG ·2026-08-25 ·Jiuyun Sun, Yong Zhang
similarity 0.57
Abstract

Physics-Informed Neural Networks (PINNs) have emerged as an important class of numerical methods for solving partial differential equations (PDEs). However, during the late-stage optimization process, further parameter updates often yield diminishing accuracy improvements while increasing computational costs. To address this issue, this paper proposes a Physics-Informed Error Field Learning (PIEFL) framework for PINNs. Unlike conventional approaches that continuously approximate the solution field using a single network, PIEFL introduces an auxiliary error network after the primary network achieves satisfactory accuracy and shifts the learning objective from the solution field to the error field. By deriving error control equations under physical constraints, the error network learns the discrepancy between the current approximation and the exact solution, and the learned error correction is combined with the primary prediction to improve solution accuracy. The proposed framework avoids continuous optimization of the entire solution space and focuses computational resources on correcting existing prediction errors. Moreover, PIEFL requires no modification to the primary network architecture, making it compatible with existing PINN models and applicable as a general post-training optimization strategy. Numerical experiments on representative PDEs demonstrate that PIEFL achieves higher solution accuracy under the same computational budget, validating its effectiveness in improving the performance of PINNs.

0.19

Efficient Neural Surrogates for Linear Radiation Transport on the Lattice and Hohlraum benchmarks

cs.AI hep-lat ·2026-10-03 ·Carmelo Gonzales, Steffen Schotthöfer, Cory D. Hauck
benchmarkcode/data similarity 0.55
Abstract

Linear radiation transport equations (RTEs) form the simulation foundations underpinning design and analysis tasks in nuclear engineering, inertial confinement fusion, medical imaging, and astrophysics, but resolving the high-dimensional phase space at engineering fidelity remains expensive enough that outer-loop workflows, such as design optimization, uncertainty quantification, and parameter sweeps, are routinely budget-bound on traditional solvers. Neural surrogates promise to relax this bottleneck by amortizing simulation cost across thousands of downstream queries, but the architectural choices and engineered inductive biases that make a surrogate accurate on one transport problem do not transfer straightforwardly across model families. We benchmark two parameter-matched neural surrogate architectures, the physics-attention Transolver and the multi-scale graph network Bi-Stride Multi-Scale MeshGraphNet (BSMS-MGN), as end-to-end approximations of the final-time particle concentration for the two-dimensional linear RTE on the canonical Lattice and Hohlraum benchmarks. An ablation across Fourier features and region-weighted training loss exposes strongly architecture-dependent inductive-bias preferences, indicating that design choices common to physics-informed surrogate workflows must be revisited per architecture rather than imported across model families, and that downstream utility depends on per-QoI sensitivity rather than a single field-level score. The model training recipe, training data, and evaluation pipeline are released alongside this paper to support reproduction, transfer to related transport problems, and evaluation as amortized forward-model components in larger outer-loop simulation workflows.

0.30

Unsupervised Neural Operators for Rotating Relativistic Stars: High-Fidelity Equation of State Inference and Pulsar Spin Evolution at Scale

cs.AI astro-ph.HEcs.LGgr-qc ·2026-11-04 ·Anarya Ray
similarity 0.54
Abstract

Observed populations of rotating neutron stars~(NSs) with millisecond-order periods are powerful probes of fundamental physics. Mass-radius measurements inform poorly constrained properties of degenerate nuclear matter, whereas high-fidelity population synthesis connects unknowns in NS formation and binary evolution to large radio-timing surveys. However, repeated structure calculations are prohibitive due to the computational cost of solving the highly coupled partial differential equations of axisymmetric general relativistic hydrostatic equilibrium that govern rotating NS interiors. Non-rotating calculations or approximate rotational corrections can bias equation of state inference and limit the fidelity of population synthesis in tracing the evolutionary history of progenitors and propagating equation of state uncertainties. In this \textit{Letter}, we develop physics-informed neural operators that can solve the axisymmetric problem with high accuracy and negligible computational cost. \textit{Our solvers are trained in a fully unsupervised setting, with the training objective informed solely by the partial differential equations, and achieve a $10^3\times$ speed-up with negligible accuracy loss}. These solvers enable scalable EoS inference that self-consistently accounts for rotation and repeated stellar-structure calculations during binary evolution, making spin predictions that account for rotational structure and EoS uncertainties computationally accessible to population synthesis.

0.26

A Neural Physics Solver for Richards Equation

cs.CE math.NAphysics.comp-ph ·2026-11-06 ·Katherine MacKenzie, James Rand, Ben Ashby, Tristan Pryer, Claire E. Heaney +2 more
similarity 0.54
Abstract · 36 pages (including appendix), 7 figures, 3 tables

A new approach to discretise and solve Richards equation based on the finite element method (FEM) is presented. The novelty of the approach, called the Neural Physics method, is that it expresses the discretisation as a convolution neural network (CNN) whose weights are predetermined by the integrals of the basis functions in the FEM. The Neural Physics method is physically consistent as it represents a discretisation of the governing equation and can run on CPUs, GPUs and the latest AI accelerators, resulting in an increase in computational speed. The Neural Physics method is demonstrated for two different discretisations of Richards equation, including a multigrid method that is realised through a U-Net architecture. The accuracy and speed of these methods is tested on a problem with a known analytical solution and compared to a standard FEM, and shows that the Neural Physics method is almost an order of magnitude faster than a comparable FEM. Finally, the Neural Physics method is applied to a real-world test case with integrated experimental data and simulates the infiltration of water through a rain garden. This new approach therefore provides a route to efficiently and accurately solve Richards equation for a wide array of hydrological applications.

0.31

The importance of tensor handling and implementation of physics-informed DeepONets

cs.LG physics.comp-ph ·2026-10-15 ·Nahum Banks, Gustavo A. M. de Almeida, Sergio Maldonado
similarity 0.54
Abstract

Physics-informed neural networks (PINNs) reduce or eliminate the need for large labelled datasets by enforcing governing equations during training. Physics-informed Deep Operator Networks (PI-DeepONets) extend this approach to learning solution operators, enabling rapid prediction across families of problems. Despite these advantages, we show that their application to higher-dimensional problems remains limited by the computational cost of training. To address this issue, we propose a modified PI-DeepONet architecture that reduces this cost by removing redundancy in how the Branch network processes input functions across collocation points. The proposed formulation is mathematically equivalent to the original architecture but reduces input tensor sizes and the number of Branch network evaluations. We analyse the computational complexity of both architectures and derive theoretical scaling laws for training time with respect to the number of collocation points and input functions. The proposed architecture is evaluated on 1D, 2D, and 3D linear advection problems. In all cases, it achieves comparable predictive accuracy to the original PI-DeepONet while consistently reducing training time. In 2D experiments, a maximum speed-up of $3.75\times$ is observed, with empirical training-time scaling agreeing with the predicted linear dependence on collocation points and input functions. Furthermore, training a 3D model on an NVIDIA A100 GPU is only feasible using the proposed architecture, as the original formulation exceeds memory limits. These results demonstrate that careful consideration of how PI-DeepONets are implemented can yield substantial gains, enhancing the practical performance of PI-DeepONets and enabling their application to otherwise intractable physics-informed learning problems.

0.12

An Invariant Neural-Network Eddy-Viscosity Closure with Iterative Solver Coupling for Molten Salt Fast Reactor Thermal-Hydraulics

cs.LG physics.flu-dyn ·2026-11-12 ·Zaid Abulawi, William Oliveira, Akzhol Almukhametov, Jun Fang, Ling Zou +3 more
theory similarity 0.52
Abstract · 42 pages, 12 figures

System thermal-hydraulics codes such as the System Analysis Module (SAM) close turbulence on coarse meshes with algebraic zero-equation mixing-length models. These models cannot represent the non-equilibrium turbulence, flow separation, and large-scale recirculation of open-cavity advanced reactors. We develop an invariant neural-network eddy-viscosity closure for SAM and apply it to the Molten Salt Fast Reactor (MSFR). The closure predicts the turbulent kinetic energy and timescale of each element from the flow and geometry of its neighbors, without solving turbulence transport equations. The resulting non-negative eddy viscosity enters the implicit diffusive operator, which keeps the momentum equations well conditioned. We prove that the closure is exactly invariant to translation, Galilean boost, rotation, reflection, and neighbor ordering. A network trained on high-order Nek5000 fields sees a different feature distribution on the coarse SAM mesh. We remove this covariate shift by iteratively retraining the network on SAM flow states against fixed Nek5000 targets. For a held-out steady state, the coupled closure reproduces the single recirculation cell and eddy-viscosity plume of the Nek5000 reference. In a 120 s pump-coastdown transient, it halves the velocity error of the mixing-length model, from 37.6% to 17.7%, and matches the Nek5000 eddy viscosity with a time-averaged relative error of 12%. The remaining velocity error comes from the coarse mesh. The coupled transient takes about 0.2 core-hours, compared with about 330 core-hours for Nek5000. The results show that the closure can recover two-equation RANS turbulence behavior in a coarse-mesh system code at a small fraction of the CFD cost.

0.29