CS Paper Radar

Towards safe and optimal flight: Viability Kernel MPC for Fully Actuated Multirotor

Massimiliano Bertoni, Alberto Piccina, Gianni Lunardi, Elias Fontanari, Andrea Del Prete, Angelo Cenedese, Giulia Michieletto

cs.RO eess.SY ·submitted 2026-08-26 07:26 UTC · v1

Abstract

Industrial aerial robotics demands safety guarantees for navigation in unstructured environments while optimizing performance and computational efficiency. This paper presents a method for generating safe pose trajectories for fully actuated multirotors within a Model Predictive Control (MPC) framework, leveraging both viability theory and data-driven methods. Obstacle avoidance is enforced through dynamically computed axis-aligned bounding boxes, providing formal safety guarantees without exhaustive offline reachability analysis. Numerical simulations on a fully actuated tilted hexarotor validate the approach, demonstrating successful navigation in cluttered environments with real-time computational performance.

Closest papers

Nearest neighbours by meaning across the whole index.

Robust Variable-Horizon MPC for Landing a Multirotor UAV on a Moving Platform

eess.SY ·2026-09-28 ·Sander Doodeman, Niels Berkers, Paula Chanfreut, Elena Torta, Duarte Antunes
similarity 0.72
Abstract · Submitted to ICRA 2027

Landing a multirotor Unmanned Aerial Vehicle (UAV) on a moving platform is challenging because a UAV is underactuated and the desired landing state is generally a non-equilibrium state. Shrinking- and variable-horizon approaches are promising for reaching such non-equilibrium targets, but often lack robustness to disturbances. Robust Variable-Horizon Model Predictive Control (VH-MPC) addresses this limitation but is computationally complex for a high-dimensional system such as a multirotor UAV. This paper presents a computationally efficient robust Variable-Horizon MPC method for reaching non-equilibrium targets under bounded disturbances. The online horizon search is restricted to a neighborhood of the previously selected horizon, while maintaining recursive feasibility under bounded disturbances. A fixed robust positively invariant tube provides horizon-independent constraint tightening. By exploiting the differential flatness property of a UAV, this approach is applied to a decoupled linearized system, enabling real-time implementation on an onboard Raspberry Pi 5 at 20 Hz. Simulations show that restricting the horizon search substantially reduces computation with limited impact on the objective, while real-time Gazebo simulations demonstrate the robustness of the method. Physical experiments demonstrate successful landing of a multirotor UAV on a moving Stewart platform.

0.13

Effector-Centric NMPC of Tiltable-Multirotors for Offset-Free Omnidirectional Aerial Manipulation

cs.RO ·2026-08-18 ·Jinjie Li, Yicheng Chen, Johannes Kübel, Haokun Liu, Junichiro Sugihara +1 more
top venue similarity 0.68
Abstract · 22 pages, 26 figures. Accepted to IEEE Transactions on Robotics (T-RO). This arXiv version includes a two-page appendix with additional impl…

Aerial manipulation extends robotic operations to previously inaccessible aerial environments. Unlike arm-equipped aerial systems, tiltable-multirotors can directly generate six-degree-of-freedom wrenches through their flight bases, enabling both efficient movement and omnidirectional operation by tilting the thrust direction. This work presents a design analysis and a wrench-based control framework for tiltable-multirotors in aerial manipulation. We show that a four-rotor tiltable configuration provides a balance between interference-free propeller sizing and hovering efficiency across different attitudes, and its null-space redundancy is crucial for traversing singular configurations under physical constraints. We further show that an upward end-effector placement yields a favorable trade-off between geometric clearance and available wrench. To address disturbances, we propose a dual strategy consisting of a modified integral term for model error and an acceleration-based estimator for external wrenches. Building on these insights, we develop an effector-centric nonlinear model predictive control (NMPC) framework that integrates design choices, singularity handling, and disturbance compensation into a unified formulation. The proposed framework runs fully onboard at 100 Hz on a custom-built tiltable-quadrotor. Real-world experiments, including a 90-deg step cartwheel rotation, whiteboard pushing, and continuous 360-deg valve turning, demonstrate the feasibility of wrench-based omnidirectional manipulation with singularity traversal on a one-DoF-per-arm tiltable-quadrotor.

0.51

AirSplan: Risk-Aware Motion Planning for Quadrotors in Cluttered 3D Gaussian Splats

cs.RO ·2026-09-18 ·Seth Isaacson, William Hong, Katherine A. Skinner, Ram Vasudevan
publishedcode/data similarity 0.67
Abstract · To appear in the proceedings of IROS 2026

Quadrotors are increasingly deployed in applications such as agriculture, infrastructure inspection, and maintenance. In each of these applications, the robot must navigate complex scene geometry while remaining strictly collision-free. Unlike in ground domains, even minor collisions for aerial vehicles can result in the loss of the robot. This safety requirement induces a pair of technical challenges. First, the environment must be represented with sufficient fidelity to encode complex structure, even when no ground-truth obstacle data is available. Second, a motion planner must leverage this representation to determine a collision-free path to the goal. This paper proposes a system that addresses these complementary challenges. The proposed method, AirSplan, adopts a normalized variant of 3D Gaussian Splatting that encodes high-fidelity scene geometry. It then applies a novel reachability-based motion planner that leverages the differential flatness of quadrotors to compute continuous-time collision constraints that tightly overapproximate the robot's occupancy. Experiments demonstrate that AirSplan successfully finds a path in 81.2% of challenging test cases, a significant improvement over the nearest baseline method's 51.2%.

0.54

Jacobian State Augmented Viable Kinematic Safety Filter

cs.RO eess.SY ·2026-10-11 ·Siddharth Singh, Joshua Vaughan
similarity 0.66
Abstract · 8 pages, 8 figures, conference submission

Safety Filters (SF) are leveraged to design certifiably safe controllers, which ensures forward invariance on a defined safe set when the filter is feasible. Predictive Safety Filters (PSF) embed these constraints to a closed-loop model-based optimization method to improve constraint satisfaction, and reduce feasibility loss caused by myopic, one-step filtering. Related viability-based methods emphasize approximating a viability kernel which ensures admissible control for all future time, but requires significant computational expense. This work introduces a Jacobian-based kinematic safety filter leveraging an augmented state variable with task-space velocity and filters task-space acceleration to preserve the feasibility of a low-level filter while enforcing joint position and velocity. The proposed method introduces a nested Quadratic Program (QP) formulation, defines a conservative inner approximation of viability envelope and computes a viable planner online. The method is validated in a simplified 2R planar manipulator simulation environment and shows significant improvement compared to a baseline Control Barrier Function Quadratic Program (CBF-QP) based filter. The experiments highlights the improvements in terms of computation time compared to traditional PSF and Reference Governor approach while also showing significant reduction in feasibility violations. Lastly, a simplified demonstration on a simulated 6-DoF manipulator highlights the potential scalability of the method to higher degree-of-freedom setups.

0.13

Contact-Aware Incremental Model Predictive Control for an Underactuated Aerial Manipulator

cs.RO ·2026-09-10 ·Darwin Liu, Tamas Keviczky, Sihao Sun
top venue similarity 0.66
Abstract · 8 pages, 6 figures

We present a robust contact-aware control framework for aerial writing on an underactuated platform. The framework combines nonlinear model predictive control (NMPC) for accurate end-effector position and normal-force tracking at small reference penetration depths, with consistent performance across controller tunings, with whole-body incremental nonlinear dynamic inversion (INDI) for robustness to frictional and aerodynamic disturbances during contact. The proposed controllers are validated on a quadrotor-based aerial manipulator with a rigid, single-link, one-degree-of-freedom (DoF) arm in simulation and real-world experiments. The aerial writing experiments span vertical and inclined surfaces, multiple reference forces, different friction conditions, and wind disturbances. The results demonstrate that robust simultaneous five-DoF end-effector pose and contact-force tracking is achievable on a standard underactuated quadrotor with a simple, rigid, single-link arm, without requiring a fully actuated platform, a complex arm, or dedicated force/torque sensing.

0.39

QuadHand: A Compact Quadrotor Aerial Manipulator with MRC-SDF-Based Whole-Body Motion Planning

cs.RO ·2026-09-28 ·Rui Jin, Ruiyang Liu, Xinhang Xu, Haotian Jin, Yi Wang +2 more
highly cited similarity 0.66
Abstract

Uncrewed aerial manipulators (UAMs) integrate robotic arms with aerial platforms for three-dimensional physical interaction. However, enlarging the workspace increases arm-induced disturbances, while existing geometric representations face a trade-off between geometric fidelity and computational efficiency in close-proximity interaction. This paper presents QuadHand, a compact quadrotor aerial manipulator with a 3-DoF arm, gripper, and battery-assisted passive CoG compensation module to reduce dominant arm-induced disturbances. We further propose MRC-SDF, a Multi-articulated Robot-Centric Signed Distance Field that preserves fine geometric detail with tractable computation, and a spatiotemporal whole-body trajectory optimization framework that jointly optimizes the quadrotor and manipulator for safe and executable trajectory generation. Simulations and real-world experiments demonstrate safe and executable aerial manipulation in complex environments.

0.35

Safety-Critical Control for Quadrotor UAVs via Decentralized Navigation Functions

eess.SY math.OC ·2026-08-13 ·Omayra Yago Nieto, Alexandre Anahory Simoes, Leonardo Colombo
similarity 0.65
Abstract

We study safety-critical control for teams of quadrotor UAVs driven by decentralized navigation functions under learned model uncertainty. These functions generate fully actuated translational reference forces, while quadrotors can only produce thrust along their body-fixed vertical axes. We construct a thrust-attitude implementation of the induced navigation forces and quantify its error with respect to the fully actuated reference dynamics. An aggregated robust HOCBF-QP safety filter minimally modifies the nominal thrusts while guaranteeing pairwise collision avoidance with high probability.

0.34

NMPP: Nonlinear Model Predictive Planning for Agile UAV Flight in Cluttered Environments

cs.RO ·2026-10-06 ·Ondřej Procházka, Juraj Pauko, Robert Pěnička, Martin Saska
similarity 0.65
Abstract

Flying a quadrotor through a cluttered environment requires not only planning a collision-free reference trajectory based on perceived obstacles, but the reference also needs to be dynamically feasible and within the actuation limits of the vehicle, so that the controller can track it precisely. Existing methods either optimize a smooth polynomial inside a convex corridor, which limits agility, or treat obstacles as soft costs traded against tracking performance. We propose a Nonlinear Model Predictive Planning (NMPP) that imposes perceived obstacles as hard geometric constraints and hands a full-state reference to an obstacle-blind SE(3) controller. Our planner achieves a 58-67 % lower position RMSE than a linear Model Predictive Control trajectory planner and a 41-70 % lower RMSE than a polynomial trajectory planner. It also completes all forest flights with up to 9.5 m/s speed without collisions, and achieves 86 % flight success rate under a more aggressive speed profile where a state-of-the-art planner has only 26 % success rate. The real-world deployment showed reliable execution flying up to 5.5 m/s in an unknown cluttered environment.

0.19