CS Paper Radar

Effector-Centric NMPC of Tiltable-Multirotors for Offset-Free Omnidirectional Aerial Manipulation

Jinjie Li, Yicheng Chen, Johannes Kübel, Haokun Liu, Junichiro Sugihara, Moju Zhao

cs.RO ·submitted 2026-08-18 14:18 UTC · v2
top venue

Abstract

Aerial manipulation extends robotic operations to previously inaccessible aerial environments. Unlike arm-equipped aerial systems, tiltable-multirotors can directly generate six-degree-of-freedom wrenches through their flight bases, enabling both efficient movement and omnidirectional operation by tilting the thrust direction. This work presents a design analysis and a wrench-based control framework for tiltable-multirotors in aerial manipulation. We show that a four-rotor tiltable configuration provides a balance between interference-free propeller sizing and hovering efficiency across different attitudes, and its null-space redundancy is crucial for traversing singular configurations under physical constraints. We further show that an upward end-effector placement yields a favorable trade-off between geometric clearance and available wrench. To address disturbances, we propose a dual strategy consisting of a modified integral term for model error and an acceleration-based estimator for external wrenches. Building on these insights, we develop an effector-centric nonlinear model predictive control (NMPC) framework that integrates design choices, singularity handling, and disturbance compensation into a unified formulation. The proposed framework runs fully onboard at 100 Hz on a custom-built tiltable-quadrotor. Real-world experiments, including a 90-deg step cartwheel rotation, whiteboard pushing, and continuous 360-deg valve turning, demonstrate the feasibility of wrench-based omnidirectional manipulation with singularity traversal on a one-DoF-per-arm tiltable-quadrotor.

Comment
22 pages, 26 figures. Accepted to IEEE Transactions on Robotics (T-RO). This arXiv version includes a two-page appendix with additional implementation details
DOI
10.1109/TRO.2026.3731683

Closest papers

Nearest neighbours by meaning across the whole index.

CBF-Based Control Allocation for Omnidirectional Tiltrotor Aerial Robots

cs.RO ·2026-10-15 ·Seobeom Lee, Hyondong Oh
similarity 0.74
Abstract · 11 pages

Actively tilting aerial robots can generate six-dimensional wrenches, but slow servo response can make a desired wrench infeasible during reconfiguration. This paper develops a control barrier function (CBF) allocator that preserves wrench feasibility under bounded servo-configuration mismatch. An exact equivalent-wrench identity connects the thrust required at nominal and actual configurations. For a nonsingular six-channel allocation map, inverse allocation reduces robust wrench containment to twelve thrust margins tightened by an ellipsoidal reserve. Their complete derivatives yield a six-variable servo-rate quadratic program, followed by differential thrust allocation for tracking. A conditional forward-invariance result establishes actual-configuration feasibility under reserve coverage, feasible initialization, and admissible CBF inputs. A complementary MuJoCo study evaluates a measured-angle implementation against geometric, augmented differential, and normalized differential allocation in circular and cartwheel maneuvers, with and without disturbances. The proposed implementation achieves lower position error in all four recorded scenarios, with an attitude tradeoff in circular tracking. During the disturbed cartwheel, the desired wrench is feasible at all 1751 stored samples of continuous rotation; baseline violation rates range from 60.8% to 100%. These comparisons evaluate sampled feasibility; validation of the nominal-trajectory certificate requires nominal-state and reserve-coverage records.

0.36

Contact-Aware Incremental Model Predictive Control for an Underactuated Aerial Manipulator

cs.RO ·2026-09-10 ·Darwin Liu, Tamas Keviczky, Sihao Sun
top venue similarity 0.70
Abstract · 8 pages, 6 figures

We present a robust contact-aware control framework for aerial writing on an underactuated platform. The framework combines nonlinear model predictive control (NMPC) for accurate end-effector position and normal-force tracking at small reference penetration depths, with consistent performance across controller tunings, with whole-body incremental nonlinear dynamic inversion (INDI) for robustness to frictional and aerodynamic disturbances during contact. The proposed controllers are validated on a quadrotor-based aerial manipulator with a rigid, single-link, one-degree-of-freedom (DoF) arm in simulation and real-world experiments. The aerial writing experiments span vertical and inclined surfaces, multiple reference forces, different friction conditions, and wind disturbances. The results demonstrate that robust simultaneous five-DoF end-effector pose and contact-force tracking is achievable on a standard underactuated quadrotor with a simple, rigid, single-link arm, without requiring a fully actuated platform, a complex arm, or dedicated force/torque sensing.

0.39

FAM-DQ: A Dual-Quadrotor-Based Fully Actuated Aerial Manipulator for High-Torque Interaction

cs.RO ·2026-08-13 ·Xuwei Yang, Ruoyu Ren, Ziqian Guo
similarity 0.69
Abstract · 7 pages, 7 figures

Aerial physical interaction requires aerial manipulation platforms to generate large interaction forces and torques while maintaining precise end-effector control. However, conventional underactuated aerial manipulators suffer from strong position-attitude coupling, whereas fully actuated platform designs often face structural complexity, limited payload capacity, and insufficient torque output. This paper presents FAM-DQ, a dual-quadrotor based fully actuated aerial manipulator designed for high-torque physical interaction tasks. By mounting two quadrotor propulsion modules at the ends of a central frame through passive joints, while using a gear-driven servo to regulate the pointing direction, FAM-DQ achieves decoupled $6$-DoF end-effector control with omnidirectional manipulation capability and enhanced torque output. Experiments including trajectory tracking, attitude tracking, static torque measurement, and screw driving validate the proposed design. FAM-DQ achieves a maximum torque of $1.019~\mathrm{N}\cdot\mathrm{m}$ with a total mass of $0.447~\mathrm{kg}$, corresponding to a torque-to-mass ratio of $2.28~\mathrm{N}\cdot\mathrm{m/kg}$.

0.07

Towards safe and optimal flight: Viability Kernel MPC for Fully Actuated Multirotor

cs.RO eess.SY ·2026-08-26 ·Massimiliano Bertoni, Alberto Piccina, Gianni Lunardi, Elias Fontanari, Andrea Del Prete +2 more
similarity 0.68
Abstract

Industrial aerial robotics demands safety guarantees for navigation in unstructured environments while optimizing performance and computational efficiency. This paper presents a method for generating safe pose trajectories for fully actuated multirotors within a Model Predictive Control (MPC) framework, leveraging both viability theory and data-driven methods. Obstacle avoidance is enforced through dynamically computed axis-aligned bounding boxes, providing formal safety guarantees without exhaustive offline reachability analysis. Numerical simulations on a fully actuated tilted hexarotor validate the approach, demonstrating successful navigation in cluttered environments with real-time computational performance.

0.08

Observer-Based Robust Control for an Aerial Manipulator System under Unknown External Disturbances

eess.SY ·2026-09-07 ·Mayank Pandey, Sneha Gajbhiye
similarity 0.67
Abstract

This paper addresses the mathematical modeling and control of an aerial manipulator system comprising a quadrotor as the uncrewed aerial vehicle and a robotic arm as the manipulator. The dynamic model is established by identifying the overall center-of-mass velocity and the system's orientation as constraints, yielding a simplified, two-decoupled subsystems: a locked (overall translation) subsystem and a shape-space (actuation or overall rotation) subsystem, both subjected to external disturbances. Since the system is mechanically coupled, a critical challenge arises where constant bounded disturbances in the first subsystem manifest as time-varying, state-dependent disturbances in the second subsystem. Given that the quadrotor is inherently unstable, the movement of the robotic manipulator (RM) during flight can further jeopardize the stability of the entire QRM system if these disturbances and coupling effects are not effectively managed. To address this, we present a continuous nonlinear disturbance observer-based feedback control law, which enables the independent control of each subsystem while systematically eliminating cross-coupling effects. The efficacy of the proposed controller is validated through multiple simulations emulating practical operating conditions, thereby substantiating its real-world applicability and highlighting the core contributions of this work.

0.11

Residual Wrench Certification and Margin-Aware Control Synthesis for Aerial Physical Interaction

cs.RO eess.SY ·2026-09-30 ·Abhimanyu Khadga, Abhinav Sinha, Shashi Ranjan Kumar
similarity 0.66
Abstract

We develop a task-relative framework for certifying residual wrench authority after hover and contact loading in multirotors with bounded actuators. Using convex geometry, we derive signed margins for prescribed convex reserves, including Euclidean balls and weighted ellipsoids. We obtain computable reserve certificates from actuator-interiority bounds to support slack-maximizing allocation. To preserve the required reserve, we propose command projection onto a tightened feasible set. We then connect the available reserve to structured gain synthesis and certify a local tracking region that respects actuator limits. Within this region, we establish nominal exponential convergence and robust ultimate boundedness. For the prescribed task and morphology family, we show that the optimized octarotor attains a larger margin than the optimized hexarotor at equal total thrust. We evaluate the proposed framework in closed-loop simulations of sustained rigid-wall contact using a fixed-geometry octarotor and a variable-tilt quadrotor with matched installed thrust. The quadrotor's local certificate admits a higher normalized push limit for the prescribed task family. In tests beyond the realizability boundaries, we observe the predicted loss of authority through rotor-thrust limits for the octarotor and tilt-servo limits for the quadrotor.

0.17

Safety-Critical Bilateral Teleoperation for Omnidirectional Aerial Manipulation Using Force-Sensorless Haptic Feedback

cs.RO ·2026-08-22 ·Yubin Kim, Jinwoo Lee, Yongjun You, H. Jin Kim, Jeonghyun Byun
published similarity 0.66
Abstract · 8 pages, 10 figures. Accepted to the 2026 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2026)

This paper presents a safety-critical bilateral teleoperation framework for omnidirectional aerial manipulators that integrates visual and force-sensorless haptic wrench feedback. Unlike existing approaches that either rely on onboard force/torque sensors or use model-dependent wrench estimates, which may become unreliable under model uncertainties or induce unintended feedback during free-flight, our method implements a hierarchical safety filter based on control barrier functions to avoid such limitations. The safety filter, being the key contribution, explicitly accounts for tracking errors arising from physical interaction between the aerial manipulator and its surroundings while enforcing thrust limits, a factor overlooked despite its critical importance for flight safety. This safety filter adjusts the command from the operator to ensure safe and stable aerial manipulation and avoid motor saturation. The adjustment made by the filter is mapped to haptic feedback, which is intuitive to the operator and conveys information on physical interaction and impending motor saturation. By actual experiments with a hexarotor-based omnidirectional aerial manipulator, we demonstrate that the proposed method avoids haptic feedback during free-flight, provides directionally consistent feedback under physical interaction, and can be operated for diverse manipulative tasks. Moreover, an ablation study further shows that the saturation filter improves interaction stability by explicitly preventing motor saturation and informing the operator of corrective actions.

0.37

Robust Variable-Horizon MPC for Landing a Multirotor UAV on a Moving Platform

eess.SY ·2026-09-28 ·Sander Doodeman, Niels Berkers, Paula Chanfreut, Elena Torta, Duarte Antunes
similarity 0.66
Abstract · Submitted to ICRA 2027

Landing a multirotor Unmanned Aerial Vehicle (UAV) on a moving platform is challenging because a UAV is underactuated and the desired landing state is generally a non-equilibrium state. Shrinking- and variable-horizon approaches are promising for reaching such non-equilibrium targets, but often lack robustness to disturbances. Robust Variable-Horizon Model Predictive Control (VH-MPC) addresses this limitation but is computationally complex for a high-dimensional system such as a multirotor UAV. This paper presents a computationally efficient robust Variable-Horizon MPC method for reaching non-equilibrium targets under bounded disturbances. The online horizon search is restricted to a neighborhood of the previously selected horizon, while maintaining recursive feasibility under bounded disturbances. A fixed robust positively invariant tube provides horizon-independent constraint tightening. By exploiting the differential flatness property of a UAV, this approach is applied to a decoupled linearized system, enabling real-time implementation on an onboard Raspberry Pi 5 at 20 Hz. Simulations show that restricting the horizon search substantially reduces computation with limited impact on the objective, while real-time Gazebo simulations demonstrate the robustness of the method. Physical experiments demonstrate successful landing of a multirotor UAV on a moving Stewart platform.

0.13